scholarly journals Degradable 2-Hydroxyethyl Methacrylate/Gelatin/Alginate Hydrogels Infused by Nanocolloidal Graphene Oxide as Promising Drug Delivery and Scaffolding Biomaterials

Gels ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 22
Author(s):  
Marija M. Babić Radić ◽  
Vuk V. Filipović ◽  
Marija Vukomanović ◽  
Jasmina Nikodinović Runić ◽  
Simonida Lj. Tomić

The design and evaluation of novel 2-hydroxyethyl methacrylate/gelatin/alginate/graphene oxide hydrogels as innovative scaffolding biomaterials, which concurrently are the suitable drug delivery carrier, was proposed. The hydrogels were prepared by the adapted porogen leaching method; this is also the first time this method has been used to incorporate nanocolloidal graphene oxide through the hydrogel and simultaneously form porous structures. The effects of a material’s composition on its chemical, morphological, mechanical, and swelling properties, as well as on cell viability and in vitro degradation, were assessed using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), measurements of Young’s modulus, gravimeter method and MTT test, respectively. The engineered hydrogels show good swelling capacity, fully hydrophilic surfaces, tunable porosity (from 56 to 76%) and mechanical properties (from 1.69 to 4.78 MPa), curcumin entrapment efficiency above 99% and excellent curcumin release performances. In vitro cytotoxicity on healthy human fibroblast (MRC5 cells) by MTT test reveal that the materials are nontoxic and biocompatible, proposing novel hydrogels for in vivo clinical evaluation to optimize tissue regeneration treatments by coupling the hydrogels with cells and different active agents to create material/biofactor hybrids with new levels of biofunctionality.

2020 ◽  
Vol 17 ◽  
Author(s):  
Akhlesh Kumar Jain ◽  
Hitesh Sahu ◽  
Keerti Mishra ◽  
Suresh Thareja

Aim: To design D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for site specific delivery. Background: Liver cancer is the third leading cause of death in world and fifth most often diagnosed cancer is the major global threat to public health. Treatment of liver cancer with conventional method bears several side effects, thus to undertake these side effects as a formulation challenge, it is necessary to develop novel target specific drug delivery system for the effective and better localization of drug into the proximity of target with restricting the movement of drug in normal tissues. Objective: To optimize and characterize the developed D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for effective treatment of liver cancer. Materials and methods: 5-FU loaded JFSSNPs were prepared and optimized formulation had higher encapsulation efficiency were conjugated with D-Mannose. These formulations were characterized for size, morphology, zeta potential, X-Ray Diffraction, and Differential Scanning Calorimetry. Potential of NPs were studied using in vitro cytotoxicity assay, in vivo kinetic studies and bio-distribution studies. Result and discussion: 5-Fluorouracil loaded NPs had particle size between 336 to 802nm with drug entrapment efficiency was between 64.2 to 82.3%. In XRD analysis, 5-FU peak was diminished in the diffractogram, which could be attributed to the successful incorporation of drug in amorphous form. DSC study suggests there was no physical interaction between 5- FU and Polymer. NPs showed sustained in vitro 5-FU release up to 2 hours. In vivo, mannose conjugated NPs prolonged the plasma level of 5-FU and assist selective accumulation of 5-FU in the liver (vs other organs spleen, kidney, lungs and heart) compared to unconjugated one and plain drug. Conclusion: In vivo, bio-distribution and plasma profile studies resulted in significantly higher concentration of 5- Fluorouracil liver suggesting that these carriers are efficient, viable, and targeted carrier of 5-FU treatment of liver cancer.


2013 ◽  
Vol 5 (15) ◽  
pp. 6909-6914 ◽  
Author(s):  
Guodong Liu ◽  
He Shen ◽  
Jinning Mao ◽  
Liming Zhang ◽  
Zhen Jiang ◽  
...  

2010 ◽  
Vol 1257 ◽  
Author(s):  
Andrea Fornara ◽  
Alberto Recalenda ◽  
Jian Qin ◽  
Abhilash Sugunan ◽  
Fei Ye ◽  
...  

AbstractNanoparticles consisting of different biocompatible materials are attracting a lot of interest in the biomedical area as useful tools for drug delivery, photo-therapy and contrast enhancement agents in MRI, fluorescence and confocal microscopy. This work mainly focuses on the synthesis of polymeric/inorganic multifunctional nanoparticles (PIMN) based on biocompatible di-block copolymer poly(L,L-lactide-co-ethylene glycol) (PLLA-PEG) via an emulsion-evaporation method. Besides containing a hydrophobic drug (Indomethacin), these polymeric nanoparticles incorporate different visualization agents such as superparamagnetic iron oxide nanoparticles (SPION) and fluorescent Quantum Dots (QDs) that are used as contrast agents for Magnetic Resonance Imaging (MRI) and fluorescence microscopy together. Gold Nanorods are also incorporated in such nanostructures to allow simultaneous visualization and photodynamic therapy. MRI studies are performed with different loading of SPION into PIMN, showing an enhancement in T2 contrast superior to commercial contrast agents. Core-shell QDs absorption and emission spectra are recorded before and after their loading into PIMN. With these polymeric/inorganic multifunctional nanoparticles, both MRI visualization and confocal fluorescence microscopy studies can be performed. Gold nanorods are also synthesized and incorporated into PIMN without changing their longitudinal absorption peak usable for lased excitation and phototherapy. In-vitro cytotoxicity studies have also been performed to confirm the low cytotoxicity of PIMN for further in-vivo studies.


2020 ◽  
Vol 11 (SPL4) ◽  
pp. 1853-1863
Author(s):  
Shubhra Rai ◽  
Gopal Rai ◽  
Ashish Budhrani

Lipospheres represent a novel type of fat-based encapsulation system produced for the topical drug delivery of bioactive compounds. The goal of this research work was to develop lipospheres, including ketoprofen applied for topical skin drug delivery. Ketoprofen lipospheres were formulated by melt emulsification method using stearic acid and Phospholipon® 90G. The lipospheres were analysed in terms of particle size and morphology, entrapment efficiency, Differential scanning calorimetry, In-vitro drug release, In-vivo (Anti-inflammatory activity). Outcomes of research revealed that particle size was found to be 9.66 µm and entrapment efficiency 86.21 ± 5.79 %. In-vivo, the study of ketoprofen loaded lipospheres formulation shows a higher plain formulation concentration in plasma (5.61 mg/mL). For dermis, ketoprofen retention was 27.02 ± 5.4 mg/mL for the lipospheres formulation, in contrast to that of the plain formulation group (10.05 ± 2.8 mg/mL). The anti-inflammatory effect of liposphere drug delivery systems was assessed by the xylene induced ear oedema technique and compared with marketed products. Finally, it seems that the liposphere drug delivery system possesses superior anti-inflammatory activity as compared to the marketed product gel consistencies. Liposphere may be capable of entrapping the medicament at very high levels and controlling its release over an extended period. Liposphere furnishes a proper size for topical delivery as well as is based on non-irritating and non-toxic lipids; it’s a better option for application on damaged or inflamed skin.


2020 ◽  
pp. 088532822097760
Author(s):  
Mayara Rodrigues Brandão Paiva ◽  
Gracielle Ferreira Andrade ◽  
Lays Fernanda Nunes Dourado ◽  
Brenda Fernanda Moreira Castro ◽  
Silvia Ligório Fialho ◽  
...  

Tacrolimus (TAC), a potent immunosuppressive macrolide, has been investigated for ocular diseases due to promising results in the treatment of anterior and posterior segments eye diseases. Mesoporous and functionalized silica nanoparticles show potential as TAC delivery platforms owing to their interesting characteristic as large surface area, uniform pore size distribution, high pore volume, and excellent biocompatibility. The purpose of this study was to incorporate TAC in functionalized silica nanoparticles with 3-aminopropyltriethoxysilane (MSNAPTES) and investigate the safety and biocompatibility of the systems. The MSNAPTES and MSNAPTES TAC nanoparticles were characterized. The in vitro cytotoxicity of MSNAPTES and MSNAPTES load with TAC (MSNAPTES-TAC) in retinal pigment epithelial cells (ARPE-19) was determined, chorioallantoic membrane (CAM) assay model was used to investigate the in vivo biocompatibility, and safety of intravitreal injection was evaluated using clinical examination (assessment of intraocular pressure and indirect fundus ophthalmoscopy), electroretinographic (ERG) and histologic studies in rats’ eyes. The elemental analysis (CHN), thermogravimetric (TGA), photon correlation spectroscopy and Fourier transform infrared (FTIR) analysis confirmed the presence of functionalized agent and TAC in the MSNAPTES nanoparticles. TAC loading was estimated at 7% for the MSNAPTES TAC nanoparticles. MSNAPTES and MSNAPTES TAC did not present in vitro cytotoxicity. The drug delivery systems showed good biocompatibility on CAM. No retinal abnormalities, vitreous hemorrhage, neovascularization, retinal detachment, and optic nerve atrophy were observed during the in vivo study. Follow-up ERGs showed no changes in the function of the retina cells after 15 days of intravitreal injection, and histopathologic observations support these findings. In conclusion, MSNAPTES TAC was successfully synthesized, and physicochemical analyses confirmed the presence of TAC in the nanoparticles. In vitro and in vivo studies indicated that MSNAPTES TAC was safe to intravitreal administration. Taking into account the enormous potential of MSNAPTES to carry TAC, this platform could be a promising strategy for TAC ocular drug delivery in the treatment of eye diseases.


2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.


2019 ◽  
Vol 9 (2) ◽  
pp. 116-133 ◽  
Author(s):  
Anjana Rani ◽  
Sunil Kumar ◽  
Roop K. Khar

Background:Herbal extracts have brilliant in-vitro activity but less in-vivo action in light of their macromolecular size and poor lipid solubility bringing about poor absorption and low bioavailability. These issues can be corrected by designing novel drug delivery systems. Phytosomes provide better absorption and bioavailability when compared to conventional herbal extract.Objective:This paper deals with the preparation, optimization and characterization of Phytosome of plant extract and in vivo assessment of antidiabetic and antihyperlipidemic activity for improved therapeutic efficacy having sufficient stability.Methods:Preliminary distinctive strategies were utilized to get ready Phytosome and antisolvent precipitation method was chosen. The formulation was guided by a full factorial design to study the effect of Independent variable on various dependent variables and resulted in an optimised product. Response contour plots were generated for each response factor to predict a phytosomal composition that yields phytosome formulation having least particle size and maximum entrapment efficiency.Results:Mean particle size, entrapment efficiency and Span value were found to be 295 ± 0.53nm, 82.43 ± 1.65% and 0.34 ± 0.14 respectively. Zeta potential was found to be 19.35mv, indicating the formation of stable formulation. In vitro release study described that the drug release follows the Korsmeyer- Peppas kinetic model. The results proved that Phytosomes of Casuarina equisetifolia extract exhibited more antidiabetic potential and antihyperlipidemic properties as compared to crude Casuarina extract.Conclusion:Phytosomes of Casuarina equestifolia extract was successfully formulated having good entrapment efficiency and physico-chemical characterization of the optimized product, confirming the formation of stable formulation. In vivo antidiabetic activity confirmed better potential of the optimised formulation. Consequently, it has been presumed that Phytosomes of Casuarina equisetifolia extract serve as a useful novel drug delivery system and provide more therapeutic efficacy than conventional plant extracts.


Author(s):  
Bhikshapathi D. V. R. N. ◽  
Chenna Madipalli Shalina ◽  
Vishnu Pulavarthy ◽  
Viswaja Medipally

The aim of this study was to explore the application of Gelucire 43/01 for the design of sustained release gastro retentive drug delivery system of Amlodipine besylate. Gelucire 43/01 has been used in floating sustained release formulations to prolong gastric residence time and increase its bioavailability. Gelucire 43/01 in combination with HPMC and Polyox was used as a release retarding polymer. HPMC of various viscosity grades HPMC K4M, HPMC K15M and HPMC K100M in combination of Gelucire were tested to obtain optimal total floating time as well as controlled drug release for prolonged period. Melt granulation technique has been used to prepare gastro retentive Amlodipine besylate formulations. All the formulations were evaluated in vitro for their floating ability and drug release. The floating times of all tablet formulations were greater than 12h. HPMC K4M in combination with Gelucire as polymeric matrix enhanced the drug release due to addition of hydrophilic polymer facilitated the swelling and erosion of the tablets. Incorporation of low viscosity polymer HPMC K100 M resulted in optimal floating as well as drug release for longer time. In vivo studies of optimized formulation show floating ability for 6 h in stomach. The results indicate that Gelucire 43/01 in combination with dissolution enhancers HPMC increase the permeability of the wax matrix, which provides improved dissolution thereby bioavailability of Amlodipine besylate and can be considered as a carrier for the development of sustained release floating drug delivery systems.  


2018 ◽  
Vol Volume 13 ◽  
pp. 439-453 ◽  
Author(s):  
Wentao Deng ◽  
Juhui Qiu ◽  
Shaoting Wang ◽  
Zhi Yuan ◽  
Yuefeng Jia ◽  
...  
Keyword(s):  

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 932
Author(s):  
Simonida Lj. Tomić ◽  
Jasmina Nikodinović-Runić ◽  
Marija Vukomanović ◽  
Marija M. Babić ◽  
Jovana S. Vuković

Hydrogel scaffolding biomaterials are one of the most attractive polymeric biomaterials for regenerative engineering and can be engineered into tissue mimetic scaffolds to support cell growth due to their similarity to the native extracellular matrix. The novel, versatile hydrogel scaffolds based on alginate, gelatin, 2-hydroxyethyl methacrylate, and inorganic agent hydroxyapatite were prepared by modified cryogelation. The chemical composition, morphology, porosity, mechanical properties, effects on cell viability, in vitro degradation, in vitro and in vivo biocompatibility were tested to correlate the material’s composition with the corresponding properties. Scaffolds showed an interconnected porous microstructure, satisfactory mechanical strength, favorable hydrophilicity, degradation, and suitable in vitro and in vivo biocompatible behavior. Materials showed good biocompatibility with healthy human fibroblast in cell culture, as well as in vivo with zebrafish assay, suggesting newly synthesized hydrogel scaffolds as a potential new generation of hydrogel scaffolding biomaterials with tunable properties for versatile biomedical applications and tissue regeneration.


Sign in / Sign up

Export Citation Format

Share Document