scholarly journals Chemical Compositional Signatures of Constituent Minerals of Iron Slags and Ores from the Khmer Monuments

Heritage ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 1724-1738
Author(s):  
Etsuo Uchida ◽  
Motoki Murasugi ◽  
Ayaka Kuroda ◽  
Yusu Lu

Iron slags and ores were collected from 22 sites (A to V) in Preah Khan of Kompong Svay, the area surrounding Phnom Daek, and the Angkor monuments. Iron ores were taken from two outcrops in Phnom Daek. The chemical compositions of fayalite and wüstite in the iron slags and magnetite in the iron ores were determined using a scanning electron microscope equipped with an energy dispersive spectrometer. Cluster analysis and principal component analysis using averaged chemical compositional data for fayalite allowed for the investigated slag dumps to be classified into two main groups: Groups 1 and 2. The slag dumps in the area surrounding Phnom Daek and those in the Angkor monuments were classified as Group 1, and those in Preah Khan of Kompong Svay were classified as Group 2, except for sites C and U, which were classified as Group 1. Radiocarbon dating was carried out on 10 charcoal fragments from slag dumps outside the Angkor area. The dating results indicate that iron making in Preah Khan of Kompong Svay was conducted in and after the 13th century except for sites C and U, where iron ores may have been supplied from Phnom Daek before the 13th century.

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Daniele Tognetto ◽  
Chiara De Giacinto ◽  
Alberto Armando Perrotta ◽  
Tommaso Candian ◽  
Alessandro Bova ◽  
...  

Purpose. To compare the capsule edges ultrastructure obtained by two femtosecond laser-assisted cataract surgery (FLACS) platforms and manual continuous curvilinear capsulorhexis (CCC) using scanning electron microscopy (SEM). Setting. Eye Clinic, University of Trieste, Italy. Design. Experimental comparative study. Methods. 150 anterior capsules were collected and divided into three groups as follows: Group 1 (50 capsules) obtained with manual CCC, Groups 2 and 3 (each with 50 capsules) obtained with the Catalys Laser and the LenSx Laser, respectively. All samples were imaged by means of SEM and regularity of the cut surface, and thickness of the capsule edge were evaluated and compared. Results. All femtosecond laser (FSL) capsules were perfectly circular, whereas some alteration of the circular shape was observed in the manual ones. Group 1 showed a smooth and regular capsule edge without any surface irregularity, conversely Groups 2 and 3 showed postage-stamp perforations on the capsule edge. The cut surface irregularity value in Group 2 was 1.4 ± 0.63, while it was 0.7 ± 0.49 in Group 3 (p<0.05). Group 1 had a significantly lower thickness of the capsule edge than the FSL groups (p<0.05). No statistically significant difference in the capsule edge thickness between the FSL groups was found (p=0.244). Conclusions. Despite the presence of slight cut surface irregularities, both FSL capsulotomies showed a better geometry and circularity than the manual ones. Capsulotomy specimens obtained using both FSL capsulotomies showed laser-induced alterations of the capsule edge when compared with smooth and regular edges obtained using manual CCC.


Author(s):  
Deebah Choudhary

Aim: The aim of this study was to evaluate the canal cleaning efficacy of these three file systems using scanning electron microscopy. Place and Duration of Study: The study was conducted in the Department of Conservative dentistry and Endodontics, Institute of Dental Sciences Sehora, between October 2020 and December 2020. Materials and Methods: Access cavity preparation was performed on sixty extracted human mandibular premolar teeth and working length was determined. The samples were randomly divided into three groups (n=20) depending upon the file system used i.e. Group 1 (Reciproc Blue), Group 2 (Waveone Gold) and Group 3 (F360). Samples were split into two halves by creating longitudinal grooves on the buccal and lingual surfaces. The samples were sputter-coated with gold and examined under scanning electron microscope at 5000X. The dentinal wall of root canal at coronal, middle and apical thirds of each sample were evaluated for the presence of determining the canal cleanliness and then analyzed using a five-score index. Results: The results of this study revealed that Group 1 (Reciproc Blue) exhibited better cleaning efficacy than samples of Group 2 (WaveOne Gold) and Group 3 (F360) at different locations in the canal i.e. coronal, middle and apical. The mean debris present was highest in coronal area for both group 2 and group 3 i.e. 2.1 and least was seen in apical area of group 1 i.e. 0.3. (p<0.05) Conclusion: Reciproc Blue single-file showed highest cleaning efficacy followed by Waveone Gold and F360. Reciproc file also showed effective cleaning in the apical third of the canal.


2020 ◽  
Vol 10 (18) ◽  
pp. 6321
Author(s):  
Alessandro Meduri ◽  
Alice Antonella Severo ◽  
Antonio De Maria ◽  
Pietro Perroni ◽  
Giuseppe Acri ◽  
...  

Neodymium:yttrium-aluminum-garnet (Nd:YAG) laser may cause intraocular lenses (IOLs) damages. Therefore, the effects of Nd:YAG laser on IOLs were evaluated. Twenty-four IOLs (copolymer of 2-hydroxyethylmethacrylate and 2-ethoxyethylmethacrylate) were used. For scanning electron microscope (SEM), twelve IOLs were divided into three groups: Group 1, controls; Group 2, IOLs treated with two laser spots (YC-1800 Nidek Nd:YAG laser set at 1.2 mJ); and Group 3, IOLs treated with six laser spots. All IOLs were critical point dried in CO2 and viewed in a Zeiss EVO LS10 SEM. For Energy Dispersive X-ray spectrometry (EDX), four IOLs of each group were examined with a Jeol JMC-6000 SEM. With SEM, Group 1 IOLs showed well-preserved size, shape and surface. Group 2 IOLs exhibited normal shape and margins, a peripheral furrow with irregular blebs, straight clefts and holes on the wrinkled surface. Group 3 IOLs were swollen and broken into two or three parts. With SEM and EDX, Group 1 and the undamaged surfaces of Groups 2 and 3 showed evident carbon and oxygen peaks, while, in the damaged areas, both atoms were significantly reduced. Nd:YAG laser induced evident changes in IOLs morphology and organic alterations in their chemistry: great care during posterior capsule opacification treatment is required.


2013 ◽  
Vol 11 (1) ◽  
pp. 85-99
Author(s):  
Polina Blagojevic ◽  
Niko Radulovic

It was recently confirmed that relative abundances of m/z values of the average mass scan of the total GC chromatograms (AMS) are suitable variables for multivariate statistical comparison (MVA) of essential oils. These are even more applicable, reliable and faster than the traditionally used variables-percentages (peak areas) of individual oil constituents. Herein, we have explored if AMS-derived variables are appropriate for MVA comparison of plant solvent extract compositional data. To achieve this, average mass scans of the total GC chromatograms and chemical compositions (relative percentages) of eight diethyl ether extracts (six different species; samples were analyzed using GC-FID and GC-MS; data from the literature) were separately compared using two MVA methods: agglomerative hierarchical clustering analysis and principal component analysis. The obtained results strongly suggest that MVA of complex volatile mixtures (GC-MS analyzable fractions of plant solvent extracts), using the corresponding AMS, could be considered as a promising time saving tool for easy and reliable comparison purposes. The AMS approach gives comparable or even better results than the traditional method.


2015 ◽  
Vol 2 (6) ◽  
pp. 527 ◽  
Author(s):  
Carolina Gealh Navarro Escobar ◽  
John Alexis Domingues ◽  
João Carlos Gomes ◽  
Ulises Cohelo

AIM: The aim of this study was to evaluate the effects of different salivary pH on the surface of orthodontic wires. MATERIAL AND METHODS: Two hundred and seventy wire segments of titanium-molybdenum alloy (TMA), and Cr-Ni stainless steel , subjected to saliva pH 2.0 , 5.0 and 7.6 , in three different times of storage, divided into 3 groups (n=30). Group 1: TMA (Morelli), Group 2: TMA (Ormco) and Group 3: Stainless steel Cr-Ni (Morelli). To read the roughness profilometer was used Mitutoyo Surftest Digital-301. Observation of the surface morphology was performed by scanning electron microscope (SEM). RESULTS: Between the results is that the lower the pH more roughness was found. No changes were observed on the wires roughness of group 3. In the evaluation of SEM, changes were found in surface TMA wires in pH 2 and 5, the steel wires no changes superficias. CONCLUSION: The acidic pH and time showed effects on TMA’s wires. The stainless steel wires showed no changes. We conclude that the stainless wires have greater resistance to salivary pH.


HortScience ◽  
2008 ◽  
Vol 43 (7) ◽  
pp. 1991-1995 ◽  
Author(s):  
Omar Franco-Mora ◽  
Edgar Jesús Morales-Rosales ◽  
Andrés González-Huerta ◽  
Juan Guillermo Cruz-Castillo

Thirty-four accessions of wild grapevines, native to three regions of the state of Puebla, Mexico, that is Teziutlán, Tehuacán, and Atlixco, were vegetatively characterized with 32 suggested IPGRI, UPOV, and OIV descriptors related to young shoot (YS), mature shoot (MS), young leaf (YL), mature leaf (ML), and woody shoot (WS). Excepting profile and absence of sinus teeth in ML, the remaining parameters showed variation among the accessions. After the performance of a correlation analysis among the 32 characters, only those closely correlated were used; that is, for MS: color of dorsal side of node, density of prostrate trichomes of internode; for YL: density of prostrate trichomes between veins and density of erect trichomes on main veins; and for ML: general shape of petiole sinus and the density of erect trichomes on veins in mature leaves. With those six characters, six principal components explained the total variability observed. The most closely related descriptors for principal Component 1 were the ML general shape of petiole sinus (−0.735) and the YL density of erect trichomes on main veins (0.659), whereas for principal Component 2, the MS color of the dorsal side of the node (0.677) and the density of erect trichomes in ML (0.596) were the most highly related. A cluster analysis identified four groups with a euclidean distance of 18; except for plant 183, the other six included in Group 1 were native to the regions Atlixco and Tehuacán; Group 2 was formed by plants native to the three regions, whereas Group 3 was formed by plants native to Teziutlán and Atlixco; Group 4 was formed only by Plant 36, native to Atlixco. These results show that variation among accessions occurs within and among the three states of the Puebla region.


Author(s):  
Derivaldo Moura Gois Filho ◽  
Vanessa Tavares de Gois-Santos ◽  
Ronaldo Santos Silva ◽  
Antônio Carlos Marqueti ◽  
Arthur Rodriguez Gonzalez Cortes ◽  
...  

Introduction: The adaptation of prostheses fixed over implants involves biomechanical aspects that are directly associated with treatment success. Objective: The aim of this in vitro study was to evaluate the presence of microgaps in the abutment/inner connection interface of cone morse dental implants. Materials and methods: Two groups of implants were analyzed. The first group (n = 16) employed single-manufacturer dental implants and abutments, whereas the second group (n = 16) combined multi-manufacturer materials. The sets were analyzed through scanning electron mi­croscopy, wherein microgaps between the implant connection and the abutment were observed. Results: Group 1 had an average microgap of 5.69 μm (SD ± 8.46 μm). Group 2 had an average microgap of 1.24 μm (SD ± 0.44 μm). A significant difference was found between the two groups (p = 0.002). Conclusion: Within the limitations of this study, results suggest that the group formed by multi-manufacturer implants and abutments (group 2) had smaller microgap values, and, therefore, a higher in vitro adaptation of components. DESCRIPTORS | Dental Implants; Dental Abutments; Scanning Electron Microscopy.


1993 ◽  
Vol 83 (4) ◽  
pp. 475-505 ◽  
Author(s):  
M. Bigger

AbstractOver a period of six years, the presence or absence of 23 species of arboreal insects (13 Homoptera, 1 Heteroptera, 9 ants (Hymenoptera: Formicidae)) was recorded on each of 866 young Amazon and Amazon hybrid cocoa trees at the Cocoa Research Institute, Tafo, Ghana. The general form of the time-series, derived from the proportion of trees occupied by each species, is described. Analysis of 18 of these series, taken either singly or jointly, was carried out using analysis of variance and principal components analysis and the degree of spatial association between 16 of the species was also investigated. For the latter, the number of joint occurrences of pairs of species was compared with the expected number by means of a chi squared test. An index of association was derived from the proportion of occasions on which the difference was significant. For all but four species, there were highly significant differences between annual means in the analysis of variance and, in many, the overall annual trend was downward with time. For those species where significant differences were not shown between years, trends were often apparent on individual plots but were negated because of inconsistencies between plots in the direction of the trend. In the joint analysis of all 18 species by principal components, the first component accounted for approximately 33% of the total variance and could be identified as representing to a large extent the long-term upward or downward trends shown up by the analysis of variance. The second principal component, accounting for a further 13% of total variance, was interpreted as being a further manifestation of the long-term trend, representing a tendency for deviation from the trend line shown up by the first component to become less with time and to approach the trend line in a damped oscillation. This is thought to be partly caused by a drought at the start of the experiment which affected certain species adversely. The third principal component accounted for 11% of total variance and the scores followed an irregular annual cycle which was related to relative humidity. The scores on this axis were high during dry periods of the year and low during wet periods. In the analysis of variance it was found that 13 species showed significant differences in spatial distribution between seasons and, for most, there was evidence for an annual cycle. There was also some evidence of correlation between the seasonal cycles of some insects with seasonal rainfall level or morning or afternoon relative humidity. These same species are important in contributing to the third principal component scores. Spatial association analysis showed eight species to be strongly associated. These fell into three groups with positive associations between members of the same group and negative association between members of other groups. Each group featured an ant-homopteran association, Crematogaster spp. with Planococcoides njalensis (Laing) in group 1, Oecophylla longinoda (Latreille) with Stictococcus spp. in group 2, and Camponotus spp. and Polyrhachis laboriosa F. Smith with Planococcus citri (Risso) and Toxoptera aurantii Boyer de Fonscolombe in group 3. Three other coccids were loosely linked to these groups through particular members, Waxiella sp. nr zonatus (Newstead) to group 1 through Planococcoides njalensis and to group 2 through Camponotus spp. and Phenacoccus hargreavesi (Laing) and Steatococcus spp. to group 2 through Planococcus citri. Changes taking place with time in the relative abundance of members of these groups could be discerned in the trajectories of the first two principal components. The spatial re-arrangements taking place with time of the territories of the major ant species are followed in some detail, and the effect of these changes on Homoptera is discussed.


2012 ◽  
Vol 23 (4) ◽  
pp. 351-356 ◽  
Author(s):  
Érika Sales Joviano Pereira ◽  
Isabella Faria da Cunha Peixoto ◽  
Rodrigo Keigo Lopes Nakagawa ◽  
Vicente Tadeu Lopes Buono ◽  
Maria Guiomar de Azevedo Bahia

This study evaluated the protocols of sonic and vacuum irrigation regarding the capacity of debris removal from root canal systems. Canal preparations were carried out on 30 mandibular first molars using the ProTaper Universal System. Teeth were divided into two experimental groups (n=15): Group 1: sonic irrigation and Group 2: vacuum irrigation protocol. Subsequently, the mesial roots were sectioned and observed by stereomicroscopy and scanning electron microscopy. Three independent examiners evaluated images of the apical thirds according to the following scores: 1= small presence of debris, 2= moderate presence of debris, and 3= dense presence of debris. Data were analyzed with ANOVA and Kruskal-Wallis tests (α=0.05). Comparison among the groups revealed that at the apical third, the root halves of Group 1 had significantly less surface debris (p=0.002) than those of Group 2. However, at 2 mm from the working length, Group 2's specimens showed less remaining debris in approximately 75% of the analyzed root canals. At the whole apical third, the sonic irrigation protocol removed significantly more debris than the vacuum protocol. However, in the region at 2 mm from the working length, the second irrigation method demonstrated a better performance.


2020 ◽  
Vol 17 (3) ◽  
Author(s):  
Al-Khadim Aws H. ◽  
Abdullah H. ◽  
Al-Ani Sarah T.

Introduction: The purpose of this in vitro study was to evaluate the effect of thermocycling on the compressive strength of selected luting cements. Material and methods: 5 types of luting cements were tested. A total of thirty cylindrical specimens measuring 6mm in height and 4mm in diameter were prepared for each type of cement which were then divided into two groups ie Group 1: Exposure, and Group 2: Control. Both groups were stored in distilled water at 37°C for 24 hours. Group 1 was subjected to 500 cycles in a thermocycling baths of 5ºC and 55ºC with 20 seconds in each bath. Group 2 was not exposed to thermocycling procedure. The compressive strength for each cement type was determined by using a universal testing machine. Results: Resin adhesive cement had the highest compressive strength; followed by conventional glass ionomer cement (GIC) whilst resin modified GIC was the least. Thermocycling had no significant effect on the compressive strength of RelyXTM ARC and Fuji I (p>0.05), but a significant effect on Fuji I CAPSULE, Fuji CEM, Fuji Plus CAPSLUE (p<0.05) was observed. Conclusion: The effect of thermocycling on the compressive strength of luting cements differed considerably with respect to their chemical compositions.


Sign in / Sign up

Export Citation Format

Share Document