scholarly journals Graphene Oxide–ZnO Nanocomposites for Removal of Aluminum and Copper Ions from Acid Mine Drainage Wastewater

2020 ◽  
Vol 17 (18) ◽  
pp. 6911
Author(s):  
Carolina Rodríguez ◽  
Camila Tapia ◽  
Enzo Leiva-Aravena ◽  
Eduardo Leiva
Keyword(s):  
Heavy Metals ◽  
Graphene Oxide ◽  
Zno Nanoparticles ◽  
Mine Drainage ◽  
Copper Ions ◽  
Wastewater Remediation ◽  
Ph Adjustment ◽  
Removal Capacity ◽  
Acidic Waters ◽  
Maximum Removal

Adsorption technologies are a focus of interest for the removal of pollutants in water treatment systems. These removal methods offer several design, operation and efficiency advantages over other wastewater remediation technologies. Particularly, graphene oxide (GO) has attracted great attention due to its high surface area and its effectiveness in removing heavy metals. In this work, we study the functionalization of GO with zinc oxide nanoparticles (ZnO) to improve the removal capacity of aluminum (Al) and copper (Cu) in acidic waters. Experiments were performed at different pH conditions (with and without pH adjustment). In both cases, decorated GO (GO/ZnO) nanocomposites showed an improvement in the removal capacity compared with non-functionalized GO, even when the pH of zero charge (pHPZC) was higher for GO/ZnO (5.57) than for GO (3.98). In adsorption experiments without pH adjustment, the maximum removal capacities for Al and Cu were 29.1 mg/g and 45.5 mg/g, respectively. The maximum removal percentages of the studied cations (Al and Cu) were higher than 88%. Further, under more acidic conditions (pH 4), the maximum sorption capacities using GO/ZnO as adsorbent were 19.9 mg/g and 33.5 mg/g for Al and Cu, respectively. Moreover, the removal percentages reach 95.6% for Al and 92.9% for Cu. This shows that decoration with ZnO nanoparticles is a good option for improving the sorption capacity of GO for Cu removal and to a lesser extent for Al, even when the pH was not favorable in terms of electrostatic affinity for cations. These findings contribute to a better understanding of the potential and effectiveness of GO functionalization with ZnO nanoparticles to treat acidic waters contaminated with heavy metals and its applicability for wastewater remediation.

DYE REMOVAL CAPACITY OF GRAPHENE OXIDE-IRON NANO PARTICLE COMPOSITE AS AN ADSORBENT

2018 ◽  
Author(s):  
Jyoti N. Thakre Sanjay R. Thakre P.T.Kosankar Kavita Gour Jyoti N. Thakre Sanjay R. Thakre P.T.Kosankar Kavita Gour ◽  
Keyword(s):  
Graphene Oxide ◽  
Dye Removal ◽  
Nano Particle ◽  
Particle Composite ◽  
Removal Capacity

scholarly journals Spatial Variation of Water Chemistry in Aries River Catchment Western Romania

2021 ◽  
Vol 11 (14) ◽  
pp. 6592
Author(s):  
Ana Moldovan ◽  
Maria-Alexandra Hoaghia ◽  
Anamaria Iulia Török ◽  
Marius Roman ◽  
Ionut Cornel Mirea ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Water Chemistry ◽  
Water Samples ◽  
Mine Drainage ◽  
Pollution Indices ◽  
Mining Activities ◽  
River Catchment ◽  
High Concentrations ◽  
The Impact

This study aims to investigate the quality and vulnerability of surface water (Aries River catchment) in order to identify the impact of past mining activities. For this purpose, the pollution and water quality indices, Piper and Durov plots, as well vulnerability modeling maps were used. The obtained results indicate that the water samples were contaminated with As, Fe, Mn, Pb and have relatively high concentrations of SO42−, HCO3−, TDS, Ca, K, Mg and high values for the electrical conductivity. Possible sources of the high content of chemicals could be the natural processes or the inputs of the mine drainage. Generally, according to the pollution indices, which were correlated to high concentrations of heavy metals, especially with Pb, Fe and Mn, the water samples were characterized by heavy metals pollution. The water quality index classified the studied water samples into five different classes of quality, namely: unsuitable for drinking, poor, medium, good and excellent quality. Similarly, medium, high and very high vulnerability classes were observed. The Durov and Piper plots classified the waters into Mg-HCO3− and Ca-Cl− types. The past and present mining activities clearly change the water chemistry and alter the quality of the Aries River, with the water requiring specific treatments before use.

scholarly journals Synthesis of Polyaniline Coating on the Modified Fiber Ball and Application for Cr(VI) Removal

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Xiao Li Ma ◽  
Guang Tao Fei ◽  
Shao Hui Xu
Keyword(s):  
Waste Water ◽  
Large Scale ◽  
Ph Value ◽  
Low Cost ◽  
Strong Acid ◽  
Removal Capacity ◽  
Secondary Pollution ◽  
Potential Possibility ◽  
Fiber Ball ◽  
Maximum Removal

Abstract In this study, polyaniline (PANI) is prepared by means of chemical oxidization polymerization and directly loaded on the modified fiber ball (m-FB) to obtain macroscale polyaniline/modified fiber ball (PANI/m-FB) composite, and then its removal ability of Cr(VI) is investigated. The effects of different parameters such as contact time, pH value and initial concentration on Cr(VI) removal efficiency are discussed. The experimental results illustrate that the favorable pH value is 5.0 and the maximum removal capacity is measured to be 293.13 mg g−1. Besides, PANI/m-FB composites can be regenerated and reused after being treated with strong acid. The kinetic study indicates that the adsorption procedure is mainly controlled by chemical adsorption. More importantly, the macroscale of composites can avoid secondary pollution efficiently. Benefiting from the low cost, easy preparation in large scale, environmentally friendly, excellent recycling performance as well as high removal ability, PANI/m-FB composites exhibit a potential possibility to remove Cr(VI) from industrial waste water. Graphic Abstract The polyaniline (PANI) was coated on modified fiber ball (m-FB) to remove Cr(VI) in waste water, and this kind of PANI/m-FB composites can avoid secondary pollution efficiently due to its macrostructure. Furthermore, the removal capacity can reach to 291.13 mg/g and can be multiple reused.

Preparation of polycrystalline ZnO nanoparticles loaded onto graphene oxide and their antibacterial properties

2021 ◽  
pp. 102531
Author(s):  
Xin Zhang ◽  
Huanxian Shi ◽  
Enzhou Liu ◽  
Xiaoyun Hu ◽  
Ke Zhang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Zno Nanoparticles ◽  
Antibacterial Properties

Flexible Carbon-Based Nanogenerators

2015 ◽  
Vol 1782 ◽  
pp. 1-8
Author(s):  
Ning-Qin Deng ◽  
He Tian ◽  
Qing-Tang Xue ◽  
Zhe Wang ◽  
Hai-Ming Zhao ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Graphene Oxide ◽  
Energy Harvesting ◽  
Zno Nanoparticles ◽  
Output Voltage ◽  
Multiwall Carbon Nanotubes ◽  
The Other ◽  
Peak Voltage ◽  
Energy Depletion ◽  
Multiwall Carbon

ABSTRACTNanogenerators (NGs) have great potential to solve the problems of energy depletion and environmental pollution. Here, two types of flexible nanogenerators (FNGs) based on graphene oxide (GO) and multiwall carbon nanotubes (MW-CNTs) are presented. The peak output voltage and current of GO based FNG reached up to 2 V and 30 nA, respectively, under 15 N force at 1 Hz. Moreover, the output voltage could be improved to 34.4 V when the frequency was increased to 10 Hz. It was also found the output voltage increased from 0.1 V to 2.0 V using a released GO structure. The other FNG was made by MW-CNTs mixed with ZnO nanoparticles (NPs). Its output voltage and power reached up to 7.5 V and 18.75 mW, respectively, which is much larger than that of bare ZnO based FNG. Furthermore, a peak voltage of 30 V could be gained by stamping one’s foot on the FNG. Finally, a modified NG was fabricated using four springs and two flexible layers. As a result, the voltage and power reached up to 9 V and 27mW, respectively. These works may bring out broad applications in energy harvesting.

Mechanisms and Remediation Technologies of Sulfate Removal from Acid Mine Drainage

2012 ◽  
Vol 610-613 ◽  
pp. 3252-3256
Author(s):  
Mei Qin Chen ◽  
Feng Ji Wu
Keyword(s):  
Heavy Metals ◽  
Acid Mine Drainage ◽  
Mine Drainage ◽  
Metal Corrosion ◽  
Sulfate Ion ◽  
High Concentration ◽  
Biological Reduction ◽  
Acid Mine ◽  
Sulfate Removal ◽  
Co Precipitation

Acid mine drainage (AMD) has properties of extreme acidification, quantities of sulfate and elevated levels of soluble heavy metals. It was a widespread environmental problem that caused adverse effects to the qualities of ground water and surface water. In the past decades, most of investigations were focused on the heavy metals as their toxicities for human and animals. As another main constitution of AMD, sulfate ion is nontoxic, yet high concentration of sulfate ion can cause many problems such as soil acidification, metal corrosion and health problems. More attention should be paid on the sulfate ion when people focus on the AMD. In the paper, sulfate removal mechanisms include adsorption, precipitation, co-precipitation and biological reduction were analyzed and summarized. Meanwhile, the remediation technologies, especially the applications of them in China were also presented and discussed.

Advances in Graphene for Adsorption of Heavy Metals in Wastewater

2012 ◽  
Vol 550-553 ◽  
pp. 2121-2124 ◽  
Author(s):  
Ling Ling Luo ◽  
Xing Xing Gu ◽  
Jun Wu ◽  
Shu Xian Zhong ◽  
Jian Rong Chen
Keyword(s):  
Waste Water ◽  
Heavy Metals ◽  
Aqueous Solution ◽  
Graphene Oxide ◽  
Physical Structure ◽  
High Specific Surface Area ◽  
Functionalized Graphene ◽  
Storage Material ◽  
Energy Storage Material ◽  
Material Composite

Graphene for its unique physical structure, excellent mechanical, electrical and physical properties has been widely applied in nanoelectronics, microelectronics, energy storage material, composite materials and so on. In recent years, many researchers found graphene have outstanding adsorption capacity of contaminants in aqueous solution due to its high specific surface area. This paper summarized the graphene, graphene oxide and functionalized graphene removing various heavy metals in waste water.

scholarly journals Exploiting the Potential in Water Cleanup from Metals and Nutrients of Desmodesmus sp. and Ampelodesmos mauritanicus

Plants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1461
Author(s):  
Roberto Braglia ◽  
Lorenza Rugnini ◽  
Sara Malizia ◽  
Francesco Scuderi ◽  
Enrico Luigi Redi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Anthropogenic Activities ◽  
Cost Effective ◽  
Single Species ◽  
Nitrogen And Phosphorus ◽  
Removal Rates ◽  
Sequential Approach ◽  
Removal Capacity ◽  
Green Microalga

Increasing levels of freshwater contaminants, mainly due to anthropogenic activities, have resulted in a great deal of interest in finding new eco-friendly, cost-effective and efficient methods for remediating polluted waters. The aim of this work was to assess the feasibility of using a green microalga Desmodesmus sp., a cyanobacterium Nostoc sp. and a hemicryptophyte Ampelodesmos mauritanicus to bioremediate a water polluted with an excess of nutrients (nitrogen and phosphorus) and heavy metals (copper and nickel). We immediately determined that Nostoc sp. was sensitive to metal toxicity, and thus Desmodesmus sp. was chosen for sequential tests with A. mauritanicus. First, A. mauritanicus plants were grown in the ‘polluted’ culture medium for seven days and were, then, substituted by Desmodesmus sp. for a further seven days (14 days in total). Heavy metals were shown to negatively affect both the growth rates and nutrient removal capacity. The sequential approach resulted in high metal removal rates in the single metal solutions up to 74% for Cu and 85% for Ni, while, in the bi-metal solutions, the removal rates were lower and showed a bias for Cu uptake. Single species controls showed better outcomes; however, further studies are necessary to investigate the behavior of new species.

Sign in / Sign up

Export Citation Format

Share Document