scholarly journals Evaluation of Articular Eminence Inclination in Normo-Divergent Subjects with Different Skeletal Classes through CBCT

2021 ◽  
Vol 18 (11) ◽  
pp. 5992
Author(s):  
Francesco Moscagiuri ◽  
Francesco Caroccia ◽  
Chiara Lopes ◽  
Beatrice Di Carlo ◽  
Erica Di Maria ◽  
...  
Keyword(s):  
Cross Sectional Study ◽  
Cone Beam ◽  
Class Iii ◽  
Articular Eminence ◽  
Cross Sectional ◽  
Future Studies ◽  
Skeletal Class ◽  
Significant Difference ◽  
Left And Right ◽  
The Right

(1) We aimed to compare articular eminence inclination (AEI) in normo-divergent subjects (SN^GoGn = 32° ± 5°), with different anteroposterior sagittal skeletal classes through a cone beam computed generated tomography (CBCT). (2) In this cross-sectional study, CBCT records were retrospectively analysed. From the original sample of 52 CBCT records, 33 records of normo-divergent adult subjects were selected (11 Class I, 13 Class II and 9 Class III). On mid-sagittal section of the Temporomandibular Joint (TMJ) on both sides, AEI was calculated by graphic method. (3) The Kruskal–Wallis test was used to evaluate any difference between AEI on both left and right sides in the three groups. No statistically significant difference was observed on either the right side (p = 0.174) or the left side (p = 0.624). (4) Articular eminence inclination seems to be not related with skeletal class. Given the lack of significance in the observed differences between AEI and skeletal classes, we believe that future studies should focus on assessing possible relationships between AEI and different vertical skeletal patterns.

scholarly journals Alveolar Bone Morphotype in Orthodontic Patients

2021 ◽  
Vol 16 (2) ◽  
pp. 127-140
Author(s):  
Jaime A. Jacques ◽  
Felipe A. Balbontin-Ayala ◽  
Karla F. Gambetta-Tessini ◽  
Arturo Besa-Alonso ◽  
Erica I. Bustamante-Olivares
Keyword(s):  
Alveolar Bone ◽  
Gingival Recession ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Class Iii ◽  
Cross Sectional ◽  
Skeletal Class ◽  
High Prevalence ◽  
Orthodontic Patients ◽  
Mandibular Teeth

Orthodontic treatments have been described as a risk factor for the development of gingival recessions. This descriptive and cross-sectional study was performed to evaluate the alveolar bone morphotype of the upper and lower anterior of 33 orthodontic treatment of candidate patients. The images were obtained from a high-resolution cone beam computerised tomography. Then, the thickness of the alveolar bone plate of teeth was measured in six levels, recording the presence of dehiscences and fenestrations. A total of 2,334 sites were evaluated. The average thickness of the maxillary alveolar bone at the buccal surface was 0.70, 0.62 and 1.43 mm at the cervical, middle and apical levels, respectively, while in the mandibular teeth it was 0.53, 0.50 and 2.96 mm. At the palatal and lingual surfaces, the bone was thicker than the buccal except at the apical level of the mandible. Most of the examined sites were measured less than 1 mm (n = 1,235, 52.9%), associated with high prevalence of bone dehiscences (57.6%) and fenestrations (33.3%), particularly in skeletal Class III patients. The observed bone morphotype involved a high vulnerability to bone resorption, and the subsequent gingival recession occurrence, face to orthodontic movements.

scholarly journals The association between palatal rugae pattern and dental malocclusion

2019 ◽  
Vol 24 (1) ◽  
pp. 037e1-037e9 ◽  
Author(s):  
Farheen Fatima ◽  
Mubassar Fida ◽  
Attiya Shaikh
Keyword(s):  
Class Ii ◽  
Cross Sectional Study ◽  
Class Iii ◽  
Sectional Study ◽  
Cross Sectional ◽  
Palatal Rugae ◽  
Significant Difference ◽  
The Mean ◽  
The Right ◽  
Dental Malocclusion

ABSTRACT Introduction: Palatal rugae complete its development during early intrauterine life, whereas dental malocclusions in permanent dentition establishes several years into the post-natal life. Objective: The objective of present study was to determine if there is an association between the palatal rugae pattern and Angle’s classes of malocclusion. Methods: A cross-sectional study was conducted on pretreatment dental casts of 184 patients. The sample was divided into the following groups: Class I, Class II div. 1, Class II div. 2, and Class III. The number of palatal rugae was recorded, bilaterally. The length, pattern and orientation of three anterior-most primary rugae on both sides were recorded. Results: The mean age of the study sample was 17.8 ± 5.4 years. The mean number of the palatal rugae was 11.18 ± 2.5, with significant differences among different malocclusion groups. The length of the first rugae on left side and third rugae on both sides varied significantly among the groups (p< 0.05). Similarly, the pattern of palatal rugae was also found to be significantly different among the malocclusion groups. The right sided rugae did not have any significant difference in the orientation in different malocclusion groups; however, the left sided rugae showed significant differences among the four malocclusion groups (p< 0.001). Conclusions: The current study showed subtle differences in the palatal rugae pattern among the Angle’s classes of malocclusion. Similarly, the length and orientation of some rugae were also found to be significantly different between malocclusion groups.

A Study on Bolton Anterior Tooth Size Discrepancies among Different Malocclusion Groups

2013 ◽  
Vol 1 (2) ◽  
pp. 1-4
Author(s):  
AW Ali ◽  
MZ Hossain
Keyword(s):  
Cross Sectional Study ◽  
Normal Group ◽  
Anterior Tooth ◽  
Tooth Size ◽  
Class Iii ◽  
Cross Sectional ◽  
Normal Occlusion ◽  
Significant Difference ◽  
The Mean ◽  
Bangladeshi Population

Aim: To investigate the correlation between anterior tooth size discrepancies among Angle's Class l, ll, lll malocclusions and corresponding normal occlusion, as well as their prevalence in Bangladeshi population. This study would act as a reference for diagnosis, treatment planning and assessment of prognosis in some orthodontic cases. Methods: This cross sectional study was conducted in the Department of Orthodontics & Dentofacial Orthopedics, Dhaka Dental College & Hospital. A total number of 200 subjects were selected in Angle's Class l, ll, lll and corresponding normal group. Each group had 50 subjects with males and females. A chi-square test was performed to statistically compare the prevalence of anterior tooth size discrepancies among Angle's Class l, ll, lll malocclusions and corresponding normal occlusion and two genders. Analysis of variance was used to compare the mean Bolton anterior tooth size ratios as a function of angle classification and gender. Statistical differences were determined at the 95% confidence level (p< 0.05). Results: No significant difference was observed in the mean Bolton anterior ratio between normal group and class-I malocclusion group (p = 0.343). Significant differences were observed between Class-II malocclusion and normal group (p=0.001), and also between Class-III malocclusion and normal group (p = 0.001). Individuals with Angle Class lll and Class ll malocclusions showed significantly greater prevalence of tooth size discrepancy than Class l malocclusion and corresponding normal group. Conclusion: The great diversity and ethnic mix of Bangladeshi population should alert our orthodontist to use Bolton analysis as an important diagnostic tool and become aware of the moderate variations that may be present and treated. It may somehow guide planning of this type of study in future. DOI: http://dx.doi.org/10.3329/bjodfo.v1i2.15982 Ban J Orthod & Dentofac Orthop, April 2011; Vol-1, No.2, 1-4

scholarly journals Determination of Sagittal Skeletal Discrepancy through Beta Angle: A Lateral Cephalometric Study

2020 ◽  
Vol 10 (3) ◽  
pp. 40-43
Author(s):  
Farah Saleem ◽  
Zubair H Awiasi
Keyword(s):  
Correct Diagnosis ◽  
Cross Sectional Study ◽  
X Rays ◽  
Class Iii ◽  
Cross Sectional ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Beta Angle ◽  
Third Line ◽  
Cephalometric Study

Introduction: Accurate classification and treatment planning relies on correct diagnosis of skeletal and dentalrelationships. Commonly used measurements used to classify sagittal relationship ANB and Wit’s appraisal are not without potential inherent problems which might lead to less accurate classification of sagittal dysplasia. To avoid these problems, a new approach Beta angle was introduced by Baik in 2004. Beta angle as it involves different landmarks of classifying anterior-posterior relationships is said to be devoid of those problems thus more reliable. We conducted a cross sectional study to measure the angle among patients presenting in Nishtar Institute of Dentistry Multan Pakistan. Materials and Method: Ninety pretreatment cephalometric x-rays of patients between ages 12 to 30 years were selected and studied. They were divided into three classes based on ANB angle and Wit’s appraisal. For the measurement of Beta angle, a line was drawn from the center of condyle (C) to point A and other to point B. A third line joining A to B was drawn. A line from point A perpendicular to line C-B was drawn and angle was measured between this perpendicular and line joining A-B. ANOVA was used to compare means of three groups. Pearson correlational coefficient was used to correlate relationship between Beta angle and ANB angle. Result: The results showed Beta angle ranged between 27° and 34° for class I. Subjects having angle less than 27° can be classified as skeletal class II and those with angles larger than 34° as skeletal class III subjects. Conclusion: Beta angle is reliable method for assessing and classifying sagittal skeletal discrepancies 

scholarly journals Assessment of the virtual guide on eye self-examination in the context of HIV/AIDS

2012 ◽  
Vol 25 (spe1) ◽  
pp. 87-93 ◽  
Author(s):  
Jennara Candido Nascimento ◽  
Maria Alzete Lima ◽  
Paulo Cesár de Almeida ◽  
Lorita Marlena Freitag Pagliuca ◽  
Joselany Áfio Caetano
Keyword(s):  
Cross Sectional Study ◽  
Sectional Study ◽  
Cross Sectional ◽  
Eye Health ◽  
Significant Difference ◽  
Socioeconomic Profile ◽  
The Right ◽  
Self Examination ◽  
Text Illustrations ◽  
Hiv Aids

OBJECTIVE: To analyze the efficacy of a virtual guide with a view to promoting eye health. METHODS: Cross-sectional study carried out with 130 HIV/AIDS patients from an ambulatory unit between May and August/2010. The data was collected through interviews and observation, using three forms that addressed the socioeconomic profile, understanding and performing the virtual guide eye self-examination. Data were analysed using descriptive statistics, χ² and Fisher-Freeman-Halton tests. It was considered statistically significant p <0.05. RESULTS: The virtual guide was positively evaluated in the categories of understanding and adequacy of text illustrations. There was statistically significant difference between the tests performed with this virtual guide (p=0.036). Comparing the results obtained by participants and researchers, we observed similarities in the findings (p>0.140), excepting only the evaluation of the right eyelid. CONCLUSION: The virtual guide helped developing proper eye self-exam, enabling people to notice alterations in their eyes.

scholarly journals GINGIVAL THICKNESS ASSESSMENT AT MANDIBULAR INCISORS OF ORTHODONTIC PATIENTS WITH ULTRASOUND AND CONE-BEAM CT.  A CROSS-SECTIONAL STUDY

2019 ◽  
Author(s):  
Dimitrios Kloukos ◽  
Lydia Kakali ◽  
George Koukos ◽  
Anton Sculean ◽  
Andreas Stavropoulos ◽  
...  
Keyword(s):  
Cone Beam ◽  
Point Estimate ◽  
Central Incisor ◽  
Cross Sectional ◽  
Gingival Thickness ◽  
Significant Difference ◽  
Orthodontic Patients ◽  
Clinically Significant ◽  
The Right ◽  
Mandibular Incisors

Abstract Background Quantitative and qualitative analysis of several periodontal parameters plays an important role in several dental procedures. Aim of the current study was to assess gingival thickness (GT) at mandibular incisors of orthodontic patients with two methods and determine how these methods are compared to each other when assessing periodontal anatomy through soft tissue thickness.Methods The sample consisted of 40 consecutive adult orthodontic patients. GT was measured at both central mandibular incisors, mid-facially on the buccal aspect, 2mm apically to the free gingival margin with two methods: a) clinically with an Ultrasound device (USD) and b) radiographically with Cone Beam Computed Tomography (CBCT).Results CBCT measurements were consistently higher than USD measurements, with the difference ranging from 0.13 mm to 0.21 mm. No difference was noted between the repeated CBCT measurements at the right central incisor (Bias= 0.05 mm; 95% CI= -0.01, 0.11, p=0.104). Although the respective results for the left incisor indicated, statistically, that the measurements were not exactly replicated, the magnitude of the point estimate was small and not clinically significant (Bias= 0.06 mm; 95% CI= 0.01, 0.11, p=0.014). Small differences between CBCT measurements made by the 2 examiners at the left central incisor (bias= 0.06 mm, 95% CI= 0.01, 0.11, p=0.014) were detected. However, this difference was minor, and again, not clinically significant. The respective analysis on the right incisor showed no significant difference (bias= 0.05 mm, 95% CI= -0.01, 0.11, p=0.246).Conclusions Present data indicate that CBCT measurements were highly reproducible and yielded greater values compared to USD measurements.

scholarly journals Craniometric study of the Orbital Index in brazilian skulls

2021 ◽  
Vol 69 ◽  
Author(s):  
Larissa Chaves Cardoso FERNANDES ◽  
Patrícia Moreira RABELLO ◽  
Bianca Marques SANTIAGO ◽  
Marcus Vitor Diniz de CARVALHO ◽  
Manoel Raimundo de SENA JÚNIOR ◽  
...  
Keyword(s):  
Mixed Race ◽  
Cross Sectional Study ◽  
Southeastern Brazil ◽  
Cross Sectional ◽  
Significance Level ◽  
Brazilian Sample ◽  
Significant Difference ◽  
Student’S T ◽  
The Right ◽  
Student’S T Test

ABSTRACT Objetive To determine the percentage of correctness of the Orbital Index (OI) for estimation of sex, ancestry and age in Brazilian skulls. Methods Cross-sectional study of 183 human dry skulls from the southeastern Brazil. A total of 100 skeletons were males and 83 females; of which 36 were aged up to 39 years, 60 aged between 40 and 59 years, and 87 aged 60 years or older. As for ancestry, 103 were from white, 51 mixed race, and 29 black individuals. The OI was calculate by the formula = height/width x 100. The data were submitted to Student’s t test, F (ANOVA), Tukey and Kruskal Wallis tests as well as to discriminant analysis, with a 5% significance level. Results The sample was characterized as mesoseme, with a mean age of 56.62 (±19.97) years. No significant difference was observed (p=0.511) between the OI in females (right: 86.43 ± 6.58 and left: 86.70 ± 5.93) and males (right: 85.78 ± 6.69 and left: 86.37 ± 6.20). There were no significant differences between age, ancestry and the variables analyzed (p>0.05). The right and left orbital widths were significantly dimorphic between sexes (p<0.001). The percentage of correctness of the method for estimation of sex, age and ancestry was found to be 65.6%, 43.7%, and 43.6%, respectively. Conclusions The OI is not an appropriate method for estimation of sex, ancestry and estimation of age in this Brazilian sample. The methodology should be expanded to other population groups so that it can be improved.

scholarly journals Prevalence of malocclusion among school Children of Kathmandu, Nepal

2019 ◽  
Vol 9 (1) ◽  
pp. 59-62
Author(s):  
Manju Bajracharya ◽  
Sunanda Sundas ◽  
Resina Pradhan ◽  
Surendra Maharjan
Keyword(s):  
School Children ◽  
Cross Sectional Study ◽  
Mixed Dentition ◽  
Class I ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Cross Sectional ◽  
Normal Occlusion ◽  
Significant Difference ◽  
Study Population

Introduction: this study was carried to understand Prevalence of malocclusion among the school children of Kathmandu, Sorakhutte residing near school during mixed dentition period. A sample of 600 children ; 365 male, 235 female in age group of 6-13yrs was selected randomly from different school of Kathmandu city. The aim of our study is to find out prevalence of malocclusion among the mixed detention children of Kathmandu. Materials & Method: Data was collected using direct observation of the subjects, Descriptive cross-sectional study method was used in this research. Occlusal assessment were done according to angle’s classification and dewey’s modification type of class I, class III malocclusion. Result: Subjects with normal occlusion was found to be 59.3% and with malocclusion was found to 40.7%. Among them class I malocclusion was majority of (57%) of study population, crowded incisors and significant difference was observed between male and female in the study. Conclusion: This study helps to access the prevalence malocclusion and need of orthodontic treatment for the mixed dentition period children.

scholarly journals Palatal bone thickness at the implantation area of maxillary skeletal expander in adult patients with skeletal Class III malocclusion: a cone-beam computed tomography study

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Weiting Chen ◽  
Kaili Zhang ◽  
Dongxu Liu
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Adult Patients ◽  
Cone Beam ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Bone Thickness ◽  
Skeletal Class ◽  
Significant Difference ◽  
Palatal Bone

Abstract Background Maxillary skeletal expanders (MSE) is effective for the treatment of maxillary transverse deformity. The purpose of the study was to analyse the palatal bone thickness in the of MSE implantation in patients with skeletal class III malocclusion. Methods A total of 80 adult patients (40 males, 40 females) with an average angle before treatment were divided into two groups, the skeletal class III malocclusion group and the skeletal I malocclusion group, based on sagittal facial type. Each group consisted of 40 patients, with a male to female ratio of 1:1. A cone-beam computed tomography scanner was employed to obtain DICOM data for all patients. The palatal bone thickness was measured at 45 sites with MIMICS 21.0 software, and SPSS 22.0 software was employed for statistical analysis. The bone thickness at different regions of the palate in the same group was analysed with one-way repeated measures ANOVA. Fisher’s least significant difference-t method was used for the comparison of pairs, and independent sample t test was employed to determine the significance of differences in the bone thickness at the same sites between the two groups. Results Palatal bone thickness was greater in the middle region of the midline area (P < 0.01), while the thickness in the middle and lateral areas in both groups was generally lower (P < 0.001). The bone in the anterior, middle, and posterior regions of the two groups became increasingly thin from the middle area toward the parapalatine region. The palatal bone was significantly thinner in the area 9.0 mm before the transverse palatine suture in the midline area, 9.0 mm before and after the transverse palatine suture in the middle area, and 9.0 mm after the transverse palatine suture in the lateral area. Conclusion The palatal bone was thinner in patients with class III malocclusion than in patients with class I malocclusion, with significant differences in some areas. The differences in bone thickness should be considered when MSE miniscrews are implanted. The anterior and middle palatal areas are safer for the implantation of miniscrews, while the thinness of the posterior palatal bone increases the risk of the miniscrews falling off and perforating.

Sign in / Sign up

Export Citation Format

Share Document