scholarly journals Multifunctional Coatings for Robotic Implanted Device

2019 ◽  
Vol 20 (20) ◽  
pp. 5126 ◽  
Author(s):  
Caterina Cristallini ◽  
Serena Danti ◽  
Bahareh Azimi ◽  
Veronika Tempesti ◽  
Claudio Ricci ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Vinyl Alcohol ◽  
Soft Tissues ◽  
Functional Characterization ◽  
Titanium Substrate ◽  
Repair Process ◽  
Chemical Imaging ◽  
In Vitro Cytotoxicity ◽  
Poly Vinyl Alcohol

The objective of this study was the preparation and physico-chemical, mechanical, biological, and functional characterization of a multifunctional coating for an innovative, fully implantable device. The multifunctional coating was designed to have three fundamental properties: adhesion to device, close mechanical resemblance to human soft tissues, and control of the inflammatory response and tissue repair process. This aim was fulfilled by preparing a multilayered coating based on three components: a hydrophilic primer to allow device adhesion, a poly(vinyl alcohol) hydrogel layer to provide good mechanical compliance with the human tissue, and a layer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) fibers. The use of biopolymer fibers offered the potential for a long-term interface able to modulate the release of an anti-inflammatory drug (dexamethasone), thus contrasting acute and chronic inflammation response following device implantation. Two copolymers, poly(vinyl acetate-acrylic acid) and poly(vinyl alcohol-acrylic acid), were synthetized and characterized using thermal analysis (DSC, TGA), Fourier transform infrared spectroscopy (FT-IR chemical imaging), in vitro cell viability, and an adhesion test. The resulting hydrogels were biocompatible, biostable, mechanically compatible with soft tissues, and able to incorporate and release the drug. Finally, the multifunctional coating showed a good adhesion to titanium substrate, no in vitro cytotoxicity, and a prolonged and controlled drug release.

Anticoagulant Effect of Sulphated Poly/Vinyl Alcohol-Acrylic Acid/Copolymers

1986 ◽  
Vol 56 (03) ◽  
pp. 397-400 ◽  
Author(s):  
Raymund Machovich ◽  
Miklós Nagy ◽  
Judit Györgyi-Edelényi ◽  
Katalin Csomor ◽  
István Horváth
Keyword(s):  
Acrylic Acid ◽  
Blood Coagulation ◽  
Vinyl Alcohol ◽  
Blood Clotting ◽  
Antithrombin Iii ◽  
Inhibitory Effect ◽  
Poly Vinyl Alcohol ◽  
Direct Inhibitory Effect ◽  
Vitro Effect

SummaryCopolymers of poly/vinyl alcohol-acrylic acid/ with various content of sulphate and carboxyl groups have been synthetized and tested for their in vitro effect on blood coagulation. The results indicate that the sulphated copolymers display an inhibitory effect but there is a requirement in the charged groups of about 20% in the molecqle to possess effective anticoagulation. The biochemical mechanism of their actions is complex, i.e. the inhibition of blood clotting is a consequence of both (i) the accelerated inactivation rate of thrombin by antithrombin-III and (ii) a direct inhibitory effect on the thrombin-fibrinogen reaction. Moreover, additional effects may occur on other blood coagulation enzymes than thrombin, depending on the chemical composition of the copolymers.

Synthesis, characterization, and their some chemical and biological properties of PVA/PAA/nPS hydrogel nanocomposites: Hydrogel and wound dressing

2020 ◽  
Vol 35 (3) ◽  
pp. 203-215
Author(s):  
Mehmet Emin Diken ◽  
Berna Koçer Kizilduman ◽  
Begümhan Yilmaz Kardaş ◽  
Enes Emre Doğan ◽  
Mehmet Doğan ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Acrylic Acid ◽  
Infrared Spectra ◽  
Vinyl Alcohol ◽  
Fourier Transform Infrared ◽  
Poly Vinyl Alcohol ◽  
Seed Particles ◽  
Fourier Transform Infrared Spectra ◽  
Hydrogel Nanocomposites ◽  
Poly Acrylic Acid

The nanocomposite hydrogels were prepared by dispersing of the nanopomegranate seed particles into poly(vinyl alcohol)/poly(acrylic acid) blend matrix in an aqueous medium by the solvent casting method. These hydrogels were characterized using scanning electron microscopy, Fourier transform infrared spectra, differential scanning calorimetry, and optical contact angle instruments. The nanopomegranate seed, blend, and hydrogel nanocomposites were tested for microbial activity. In addition, cytocompatibilities of these blend and hydrogel nanocomposites/composites were tested on human lymphocyte with in vitro MTS cell viability assays. Fourier transform infrared spectra revealed that esterification reaction took place among functional groups in the structure of poly(vinyl alcohol) and poly(acrylic acid). The hydrophilic properties of all hydrogels decreased with increasing nanopomegranate seed content. The mean diameters of the nanopomegranate seed particles were about 88 nm. Nanopomegranate seed particles demonstrated antibacterial properties against gram-positive bacteria, Staphylococcus aureus, and gram-negative bacteria, Escherichia coli. The lymphocyte viabilities increased after addition of nanopomegranate seeds into the polymer blend. The swelling behavior of blend and hydrogels was dependent on the cross-linking density created by the reaction between poly(vinyl alcohol)/poly(acrylic acid) blend and nanopomegranate seed. Scanning electron microscopy images were highly consistent with Fourier transform infrared spectra, differential scanning calorimetry, and antibacterial activity results.

scholarly journals Dual Network Composites of Poly(vinyl alcohol)-Calcium Metaphosphate/Alginate with Osteogenic Ions for Bone Tissue Engineering in Oral and Maxillofacial Surgery

2021 ◽  
Vol 8 (8) ◽  
pp. 107
Author(s):  
Lilis Iskandar ◽  
Lucy DiSilvio ◽  
Jonathan Acheson ◽  
Sanjukta Deb
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Vinyl Alcohol ◽  
Maxillofacial Surgery ◽  
Bone Defects ◽  
Bone Tissue Regeneration ◽  
Poly Vinyl Alcohol ◽  
Oral And Maxillofacial Surgery

Despite considerable advances in biomaterials-based bone tissue engineering technologies, autografts remain the gold standard for rehabilitating critical-sized bone defects in the oral and maxillofacial (OMF) region. A majority of advanced synthetic bone substitutes (SBS’s) have not transcended the pre-clinical stage due to inferior clinical performance and translational barriers, which include low scalability, high cost, regulatory restrictions, limited advanced facilities and human resources. The aim of this study is to develop clinically viable alternatives to address the challenges of bone tissue regeneration in the OMF region by developing ‘dual network composites’ (DNC’s) of calcium metaphosphate (CMP)—poly(vinyl alcohol) (PVA)/alginate with osteogenic ions: calcium, zinc and strontium. To fabricate DNC’s, single network composites of PVA/CMP with 10% (w/v) gelatine particles as porogen were developed using two freeze–thawing cycles and subsequently interpenetrated by guluronate-dominant sodium alginate and chelated with calcium, zinc or strontium ions. Physicochemical, compressive, water uptake, thermal, morphological and in vitro biological properties of DNC’s were characterised. The results demonstrated elastic 3D porous scaffolds resembling a ‘spongy bone’ with fluid absorbing capacity, easily sculptable to fit anatomically complex bone defects, biocompatible and osteoconductive in vitro, thus yielding potentially clinically viable for SBS alternatives in OMF surgery.

Tailoring the in vitro characteristics of poly(vinyl alcohol)-nanohydroxyapatite composite scaffolds for bone tissue engineering

2016 ◽  
Vol 36 (8) ◽  
pp. 771-784 ◽  
Author(s):  
Tejinder Kaur ◽  
Arunachalam Thirugnanam ◽  
Krishna Pramanik
Keyword(s):  
Mechanical Strength ◽  
Vinyl Alcohol ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Poly Vinyl Alcohol ◽  
Apatite Formation ◽  
Composite Scaffolds ◽  
Alizarin Red ◽  
Casting Technique

Abstract Poly(vinyl alcohol) reinforced with nanohydroxyapatite (PVA-nHA) composite scaffolds were developed by varying the nHA (1%, 2%, 3%, 4%, and 5%, w/v) composition in the PVA matrix by solvent casting technique. The developed composite scaffolds were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and contact angle measurement. The stability of the composite scaffolds in physiological environment was evaluated by swelling and degradation studies. Further, these composite scaffolds were tested for in vitro bioactivity, hemolysis, biocompatibility, and mechanical strength. SEM micrographs showed a homogenous distribution of nHA (3%, w/v) in the PVA matrix. XRD and ATR-FTIR analysis confirmed no phase contamination and the existence of the chemical bond between PVA-nHA at approximately 2474 cm-1. PVA-nHA composite scaffolds with 3% (w/v) concentration of nHA showed nominal swelling and degradation behavior with good mechanical strength. The mechanical strength and degradation properties of the scaffold above 3% (w/v) of nHA was found to deteriorate, which is due to the agglomeration of nHA. The in vitro bioactivity and hemolysis studies showed improved apatite formation and hemocompatibility of the developed scaffolds. In vitro cell adhesion, proliferation, alkaline phosphatase activity, and Alizarin red S staining confirmed the biocompatibility of the composite scaffolds.

Anomalous Diffusion in Poly(vinyl alcohol)−Poly(acrylic acid) Thin Films

2007 ◽  
Vol 111 (5) ◽  
pp. 2054-2062 ◽  
Author(s):  
Nebojša Pantelić ◽  
Carl J. Seliskar
Keyword(s):  
Thin Films ◽  
Acrylic Acid ◽  
Anomalous Diffusion ◽  
Vinyl Alcohol ◽  
Poly Vinyl Alcohol ◽  
Poly Acrylic Acid
Sign in / Sign up

Export Citation Format

Share Document