scholarly journals A-Priori Calibration of a Structured Light Underwater 3D Sensor

2020 ◽  
Vol 8 (9) ◽  
pp. 635
Author(s):  
Christian Bräuer-Burchardt ◽  
Christoph Munkelt ◽  
Ingo Gebhart ◽  
Matthias Heinze ◽  
Stefan Heist ◽  
...  
Keyword(s):  
Structured Light ◽  
A Priori ◽  
Three Dimensional ◽  
Radial Distance ◽  
Calibration Method ◽  
Correction Function ◽  
Camera Model ◽  
Accuracy Measurement ◽  
Distortion Functions ◽  
Future Work

In this study, we introduce a new calibration method for underwater optical stereo scanners. It uses air calibration, additional underwater parameters, and extended camera modeling. The new methodology can be applied to both passive photogrammetric and structured light three-dimensional (3D) scanning systems. The novel camera model uses a variable principal distance depending on the radial distance to the principal point instead of two-dimensional distortion functions. This allows for an initial improvement of 3D reconstruction quality. In a second step, certain underwater-specific parameters—such as refraction indices, glass thickness, and view-port distances—are determined. Finally, a correction function for the entire measurement volume can be obtained from a few underwater measurements. Its application further improves the measurement accuracy. Measurement examples show the performance of the new calibration method in comparison to current underwater calibration strategies. A discussion of the possibilities and limits of the new calibration method and an outlook for future work complete this work.

scholarly journals Calibration Method for Line-Structured Light Three-Dimensional Measurements Based on a Single Circular Target

2022 ◽  
Vol 12 (2) ◽  
pp. 588
Author(s):  
Jun Wang ◽  
Xuexing Li
Keyword(s):  
Structured Light ◽  
Three Dimensional ◽  
Calibration Method ◽  
Optical Center ◽  
3D Measurements ◽  
Light Plane ◽  
Laser Projector ◽  
Dimensional Measurements ◽  
Intersection Points ◽  
Circular Target

Single circular targets are widely used as calibration objects during line-structured light three-dimensional (3D) measurements because they are versatile and easy to manufacture. This paper proposes a new calibration method for line-structured light 3D measurements based on a single circular target. First, the target is placed in several positions and illuminated by a light beam emitted from a laser projector. A camera captures the resulting images and extracts an elliptic fitting profile of the target and the laser stripe. Second, an elliptical cone equation defined by the elliptic fitting profile and optical center of the camera is established based on the projective geometry. By combining the obtained elliptical cone and the known diameter of the circular target, two possible positions and orientations of the circular target are determined and two groups of 3D intersection points between the light plane and the circular target are identified. Finally, the correct group of 3D intersection points is filtered and the light plane is progressively fitted. The accuracy and effectiveness of the proposed method are verified both theoretically and experimentally. The obtained results indicate that a calibration accuracy of 0.05 mm can be achieved for an 80 mm × 80 mm planar target.

scholarly journals A novel camera calibration method for fish-eye lenses using line features

2014 ◽  
Vol XL-3 ◽  
pp. 327-332
Author(s):  
P. Srestasathiern ◽  
N. Soontranon
Keyword(s):  
A Priori ◽  
Real Data ◽  
Calibration Method ◽  
Conic Section ◽  
Symmetric Model ◽  
Camera Model ◽  
Single View ◽  
Conic Fitting ◽  
Fish Eye ◽  
Calibration Plane

In this paper, a novel method for the fish-eye lens calibration is presented. The method required only a 2D calibration plane containing straight lines i.e., checker board pattern without a priori knowing the poses of camera with respect to the calibration plane. The image of a line obtained from fish-eye lenses is a conic section. The proposed calibration method uses raw edges, which are pixels of the image line segments, in stead of using curves obtained from fitting conic to image edges. Using raw edges is more flexible and reliable than using conic section because the result from conic fitting can be unstable. The camera model used in this work is radially symmetric model i.e., bivariate non-linear function. However, this approach can use other single view point camera models. The geometric constraint used for calibrating the camera is based on the coincidence between point and line on calibration plane. The performance of the proposed calibration algorithm was assessed using simulated and real data.

scholarly journals A Flexile and High Precision Calibration Method for Binocular Structured Light Scanning System

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Jianying Yuan ◽  
Qiong Wang ◽  
Bailin Li
Keyword(s):  
Structured Light ◽  
Three Dimensional ◽  
Calibration Method ◽  
Bundle Adjustment ◽  
Reference Object ◽  
Scanning System ◽  
Structured Light Scanning ◽  
Extrinsic Parameters ◽  
Precision Level ◽  
The Cost

3D (three-dimensional) structured light scanning system is widely used in the field of reverse engineering, quality inspection, and so forth. Camera calibration is the key for scanning precision. Currently, 2D (two-dimensional) or 3D fine processed calibration reference object is usually applied for high calibration precision, which is difficult to operate and the cost is high. In this paper, a novel calibration method is proposed with a scale bar and some artificial coded targets placed randomly in the measuring volume. The principle of the proposed method is based on hierarchical self-calibration and bundle adjustment. We get initial intrinsic parameters from images. Initial extrinsic parameters in projective space are estimated with the method of factorization and then upgraded to Euclidean space with orthogonality of rotation matrix and rank 3 of the absolute quadric as constraint. Last, all camera parameters are refined through bundle adjustment. Real experiments show that the proposed method is robust, and has the same precision level as the result using delicate artificial reference object, but the hardware cost is very low compared with the current calibration method used in 3D structured light scanning system.

scholarly journals A Calibration Method for a Self-Rotating, Linear-Structured-Light Scanning, Three-Dimensional Reconstruction System Based on Plane Constraints

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8359
Author(s):  
Jianping Zhao ◽  
Yong Cheng ◽  
Gen Cai ◽  
Shengbo He ◽  
Libing Liao ◽  
...  
Keyword(s):  
3D Reconstruction ◽  
Coordinate System ◽  
Structured Light ◽  
Three Dimensional ◽  
Calibration Method ◽  
The Self ◽  
Three Dimensional Reconstruction ◽  
Optimal Position ◽  
Structured Light Scanning ◽  
Dimensional Reconstruction

This paper proposes a calibration method for a self-rotating, linear-structured-light (LSL) scanning, three-dimensional reconstruction system based on plane constraints. The point cloud of plane target collected by the self-rotating, LSL scanning, 3D reconstruction system should be constrained to the basic principle of the plane equation; it can quickly and accurately calibrate the position parameters between the coordinate system of the LSL module and the coordinate system of the self-rotating, LSL scanning, 3D reconstruction system. Additionally, the transformation equation could be established with the calibrated optimal position parameters. This paper obtains the above-mentioned position parameters through experiments and uses the calibrated self-rotating, LSL scanning, 3D reconstruction system to perform three-dimensional scanning and reconstruction of the test piece. The experimental results show that the calibration method can effectively improve the measurement accuracy of the system.

scholarly journals Structured-light 3D scanning of exhibited historical clothing—a first-ever methodical trial and its results

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Jerzy Montusiewicz ◽  
Marek Miłosz ◽  
Jacek Kęsik ◽  
Kamil Żyła
Keyword(s):  
Cultural Heritage ◽  
Information Technologies ◽  
Structured Light ◽  
Three Dimensional ◽  
3D Models ◽  
3D Scanning ◽  
Dimensional Representation ◽  
3D Scanner ◽  
Three Dimensional Representation ◽  
3D Scanners

AbstractHistorical costumes are part of cultural heritage. Unlike architectural monuments, they are very fragile, which exacerbates the problems of their protection and popularisation. A big help in this can be the digitisation of their appearance, preferably using modern techniques of three-dimensional representation (3D). The article presents the results of the search for examples and methodologies of implementing 3D scanning of exhibited historical clothes as well as the attendant problems. From a review of scientific literature it turns out that so far practically no one in the world has made any methodical attempts at scanning historical clothes using structured-light 3D scanners (SLS) and developing an appropriate methodology. The vast majority of methods for creating 3D models of clothes used photogrammetry and 3D modelling software. Therefore, an innovative approach was proposed to the problem of creating 3D models of exhibited historical clothes through their digitalisation by means of a 3D scanner using structural light technology. A proposal for the methodology of this process and concrete examples of its implementation and results are presented. The problems related to the scanning of 3D historical clothes are also described, as well as a proposal how to solve them or minimise their impact. The implementation of the methodology is presented on the example of scanning elements of the Emir of Bukhara's costume (Uzbekistan) from the end of the nineteenth century, consisting of the gown, turban and shoes. Moreover, the way of using 3D models and information technologies to popularise cultural heritage in the space of digital resources is also discussed.

scholarly journals Combining 3D Structured Light Imaging and Spine X-ray Data Improves Visualization of the Spinous Lines in the Scoliotic Spine

2020 ◽  
Vol 11 (1) ◽  
pp. 301
Author(s):  
Sławomir Paśko ◽  
Wojciech Glinkowski
Keyword(s):  
Radiation Exposure ◽  
Surface Topography ◽  
Structured Light ◽  
Spinous Process ◽  
Three Dimensional ◽  
Diagnostic System ◽  
Measurement Tool ◽  
Adequate Treatment ◽  
X Ray ◽  
Spinous Processes

Scoliosis is a three-dimensional trunk and spinal deformity. Patient evaluation is essential for the decision-making process and determines the selection of specific and adequate treatment. The diagnosis requires a radiological evaluation that exposes patients to radiation. This exposure reaches hazardous levels when numerous, repetitive radiographic studies are required for diagnostics, monitoring, and treatment. Technological improvements in radiographic devices have significantly reduced radiation exposure, but the risk for patients remains. Optical three-dimensional surface topography (3D ST) measurement systems that use surface topography (ST) to screen, diagnose, and monitor scoliosis are safer alternatives to radiography. The study aimed to show that the combination of plain X-ray and 3D ST scans allows for an approximate presentation of the vertebral column spinous processes line in space to determine the shape of the spine’s deformity in scoliosis patients. Twelve patients diagnosed with scoliosis, aged 13.1 ± 4.5 years (range: 9 to 20 years) (mean: Cobb angle 17.8°, SD: ±9.5°) were enrolled in the study. Patients were diagnosed using full-spine X-ray and whole torso 3D ST. The novel three-dimensional assessment of the spinous process lines by merging 3D ST and X-ray data in patients with scoliosis was implemented. The method’s expected uncertainty is less than 5 mm, which is better than the norm for a standard measurement tool. The presented accuracy level is considered adequate; the proposed solution is accurate enough to monitor the changes in the shape of scoliosis’s spinous processes line. The proposed method allows for a relatively precise calculation of the spinous process lines based on a three-dimensional point cloud obtained with a four-directional, three-dimensional structured light diagnostic system and a single X-ray image. The method may help reduce patients’ total radiation exposure and avoid one X-ray in the sagittal projection if biplanar radiograms are required for reconstructing the three-dimensional line of the spinous processes line.

scholarly journals The on-axis magnetic well and Mercier's criterion for arbitrary stellarator geometries

2021 ◽  
Vol 87 (2) ◽  
Author(s):  
P. Kim ◽  
R. Jorge ◽  
W. Dorland
Keyword(s):  
Magnetic Field ◽  
Original Work ◽  
Three Dimensional ◽  
Radial Distance ◽  
Analytical Form ◽  
One Dimensional ◽  
Modern Notation ◽  
Magnetic Well ◽  
First Time ◽  
Dimensional Integral

A simplified analytical form of the on-axis magnetic well and Mercier's criterion for interchange instabilities for arbitrary three-dimensional magnetic field geometries is derived. For this purpose, a near-axis expansion based on a direct coordinate approach is used by expressing the toroidal magnetic flux in terms of powers of the radial distance to the magnetic axis. For the first time, the magnetic well and Mercier's criterion are then written as a one-dimensional integral with respect to the axis arclength. When compared with the original work of Mercier, the derivation here is presented using modern notation and in a more streamlined manner that highlights essential steps. Finally, these expressions are verified numerically using several quasisymmetric and non-quasisymmetric stellarator configurations including Wendelstein 7-X.

Sign in / Sign up

Export Citation Format

Share Document