Classification of Reservoir Recovery Factor for Oil and Gas Reservoirs: A Multi-Objective Feature Selection Approach

The accurate classification of reservoir recovery factor is dampened by irregularities such as noisy and high-dimensional features associated with the reservoir measurements or characterization. These irregularities, especially a larger number of features, make it difficult to perform accurate classification of reservoir recovery factor, as the generated reservoir features are usually heterogeneous. Consequently, it is imperative to select relevant reservoir features while preserving or amplifying reservoir recovery accuracy. This phenomenon can be treated as a multi-objective optimization problem, since there are two conflicting objectives: minimizing the number of measurements and preserving high recovery classification accuracy. In this study, wrapper-based multi-objective feature selection approaches are proposed to estimate the set of Pareto optimal solutions that represents the optimum trade-off between these two objectives. Specifically, three multi-objective optimization algorithms—Non-dominated Sorting Genetic Algorithm II (NSGA-II), Multi-Objective Grey Wolf Optimizer (MOGWO) and Multi-Objective Particle Swarm Optimization (MOPSO)—are investigated in selecting relevant features from the reservoir dataset. To the best of our knowledge, this is the first time multi-objective optimization has been used for reservoir recovery factor classification. The Artificial Neural Network (ANN) classification algorithm is used to evaluate the selected reservoir features. Findings from the experimental results show that the proposed MOGWO-ANN outperforms the other two approaches (MOPSO and NSGA-II) in terms of producing non-dominated solutions with a small subset of features and reduced classification error rate.

Download Full-text

Optimal Photovoltaic System Design with Multi-Objective Optimization

International Journal of Applied Metaheuristic Computing ◽

10.4018/ijamc.2013100104 ◽

2013 ◽

Vol 4 (4) ◽

pp. 63-89 ◽

Cited By ~ 6

Author(s):

Amin Ibrahim ◽

Farid Bourennani ◽

Shahryar Rahnamayan ◽

Greg F. Naterer

Keyword(s):

Incident Energy ◽

State Of The Art ◽

Photovoltaic System ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective ◽

Conflicting Objectives ◽

Generalized Differential ◽

Maximum Field ◽

Real World Problems

Recently, several parts of the world suffer from electrical black-outs due to high electrical demands during peak hours. Stationary photovoltaic (PV) collector arrays produce clean and sustainable energy especially during peak hours which are generally day time. In addition, PVs do not emit any waste or emissions, and are silent in operation. The incident energy collected by PVs is mainly dependent on the number of collector rows, distance between collector rows, dimension of collectors, collectors inclination angle and collectors azimuth, which all are involved in the proposed modeling in this article. The objective is to achieve optimal design of a PV farm yielding two conflicting objectives namely maximum field incident energy and minimum of the deployment cost. Two state-of-the-art multi-objective evolutionary algorithms (MOEAs) called Non-dominated Sorting Genetic Algorithm-II (NSGA-II) and Generalized Differential Evolution Generation 3 (GDE3) are compared to design PV farms in Toronto, Canada area. The results are presented and discussed to illustrate the advantage of utilizing MOEA in PV farms design and other energy related real-world problems.

Download Full-text

Multi-Objective Optimization of Piezoelectric Actuator Placement for Shape Control of Plate Using Genetic Algorithms

Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1 ◽

10.1115/smasis2008-343 ◽

2008 ◽

Author(s):

Rajesh Kudikala ◽

Deb Kalyanmoy ◽

Bishakh Bhattacharya

Keyword(s):

Shape Control ◽

Optimization Problem ◽

Piezoelectric Actuators ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective ◽

Input Control ◽

Wide Range ◽

Conflicting Objectives ◽

Lag Model

Shape control of adaptive structures using piezoelectric actuators has found a wide range of applications in recent years. In this paper, the problem of finding optimal distribution of piezoelectric actuators and corresponding actuation voltages for static shape control of a plate is formulated as a multi objective optimization problem. Two conflicting objectives: minimization of input control energy and minimization of mean square deviation between the desired and actuated shapes are considered with constraints on maximum number of actuators and maximum induced stresses. A shear lag model of the smart plate structure is created and the optimization problem is solved using an evolutionary multi-objective optimization (EMO) algorithm NSGA-II. Pareto-optimal solutions are obtained for different case studies. Further, the obtained solutions are verified by comparing with single-objective optimization solutions.

Download Full-text

An evolutionary decomposition-based multi-objective feature selection for multi-label classification

PeerJ Computer Science ◽

10.7717/peerj-cs.261 ◽

2020 ◽

Vol 6 ◽

pp. e261

Author(s):

Azam Asilian Bidgoli ◽

Hossein Ebrahimpour-Komleh ◽

Shahryar Rahnamayan

Keyword(s):

Feature Selection ◽

Real World ◽

Classification Accuracy ◽

Optimization Approach ◽

Multi Objective Optimization ◽

Classification Problems ◽

Genetic Operators ◽

Feature Selection Problem ◽

Multi Objective ◽

Conflicting Objectives

Data classification is a fundamental task in data mining. Within this field, the classification of multi-labeled data has been seriously considered in recent years. In such problems, each data entity can simultaneously belong to several categories. Multi-label classification is important because of many recent real-world applications in which each entity has more than one label. To improve the performance of multi-label classification, feature selection plays an important role. It involves identifying and removing irrelevant and redundant features that unnecessarily increase the dimensions of the search space for the classification problems. However, classification may fail with an extreme decrease in the number of relevant features. Thus, minimizing the number of features and maximizing the classification accuracy are two desirable but conflicting objectives in multi-label feature selection. In this article, we introduce a multi-objective optimization algorithm customized for selecting the features of multi-label data. The proposed algorithm is an enhanced variant of a decomposition-based multi-objective optimization approach, in which the multi-label feature selection problem is divided into single-objective subproblems that can be simultaneously solved using an evolutionary algorithm. This approach leads to accelerating the optimization process and finding more diverse feature subsets. The proposed method benefits from a local search operator to find better solutions for each subproblem. We also define a pool of genetic operators to generate new feature subsets based on old generation. To evaluate the performance of the proposed algorithm, we compare it with two other multi-objective feature selection approaches on eight real-world benchmark datasets that are commonly used for multi-label classification. The reported results of multi-objective method evaluation measures, such as hypervolume indicator and set coverage, illustrate an improvement in the results obtained by the proposed method. Moreover, the proposed method achieved better results in terms of classification accuracy with fewer features compared with state-of-the-art methods.

Download Full-text

Synchronous R-NSGA-II: An Extended Preference-Based Evolutionary Algorithm for Multi-Objective Optimization

Informatica ◽

10.15388/informatica.2015.37 ◽

2015 ◽

Vol 26 (1) ◽

pp. 33-50 ◽

Cited By ~ 16

Author(s):

Ernestas Filatovas ◽

Olga Kurasova ◽

Karthik Sindhya

Keyword(s):

Evolutionary Algorithm ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective

Download Full-text

Multi-Objective Lightweight Optimization of Parameterized Suspension Components Based on NSGA-II Algorithm Coupling with Surrogate Model

Machines ◽

10.3390/machines9060107 ◽

2021 ◽

Vol 9 (6) ◽

pp. 107

Author(s):

Rongchao Jiang ◽

Zhenchao Jin ◽

Dawei Liu ◽

Dengfeng Wang

Keyword(s):

Ride Comfort ◽

Lightweight Design ◽

Dynamic Performance ◽

Vehicle Dynamic ◽

Multi Objective Optimization ◽

Original Design ◽

Dynamic Simulations ◽

Nsga Ii ◽

Torsion Beam ◽

Multi Objective

In order to reduce the negative effect of lightweighting of suspension components on vehicle dynamic performance, the control arm and torsion beam widely used in front and rear suspensions were taken as research objects for studying the lightweight design method of suspension components. Mesh morphing technology was employed to define design variables. Meanwhile, the rigid–flexible coupling vehicle model with flexible control arm and torsion beam was built for vehicle dynamic simulations. The total weight of control arm and torsion beam was taken as optimization objective, as well as ride comfort and handling stability performance indexes. In addition, the fatigue life, stiffness, and modal frequency of control arm and torsion beam were taken as the constraints. Then, Kriging model and NSGA-II were adopted to perform the multi-objective optimization of control arm and torsion beam for determining the lightweight scheme. By comparing the optimized and original design, it indicates that the weight of the optimized control arm and torsion beam are reduced 0.505 kg and 1.189 kg, respectively, while structural performance and vehicle performance satisfy the design requirement. The proposed multi-objective optimization method achieves a remarkable mass reduction, and proves to be feasible and effective for lightweight design of suspension components.

Download Full-text

Design and characterization of effective solar cells

Energy Systems ◽

10.1007/s12667-021-00451-x ◽

2021 ◽

Author(s):

Varun Ojha ◽

Giorgio Jansen ◽

Andrea Patanè ◽

Antonino La Magna ◽

Vittorio Romano ◽

...

Keyword(s):

Solar Cells ◽

Quantum Efficiency ◽

Cost Benefit Analysis ◽

Cost Minimization ◽

Cell Structure ◽

Cost Benefit ◽

Structure Design ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective

AbstractWe propose a two-stage multi-objective optimization framework for full scheme solar cell structure design and characterization, cost minimization and quantum efficiency maximization. We evaluated structures of 15 different cell designs simulated by varying material types and photodiode doping strategies. At first, non-dominated sorting genetic algorithm II (NSGA-II) produced Pareto-optimal-solutions sets for respective cell designs. Then, on investigating quantum efficiencies of all cell designs produced by NSGA-II, we applied a new multi-objective optimization algorithm II (OptIA-II) to discover the Pareto fronts of select (three) best cell designs. Our designed OptIA-II algorithm improved the quantum efficiencies of all select cell designs and reduced their fabrication costs. We observed that the cell design comprising an optimally doped zinc-oxide-based transparent conductive oxide (TCO) layer and rough silver back reflector (BR) offered a quantum efficiency ($$Q_e$$ Q e ) of 0.6031. Overall, this paper provides a full characterization of cell structure designs. It derives relationship between quantum efficiency, $$Q_e$$ Q e of a cell with its TCO layer’s doping methods and TCO and BR layer’s material types. Our solar cells design characterization enables us to perform a cost-benefit analysis of solar cells usage in real-world applications.

Download Full-text

Multi-objective optimization of energy efficiency and thermal comfort in an existing office building using NSGA-II with fitness approximation: a case study

Journal of Building Engineering ◽

10.1016/j.jobe.2021.102440 ◽

2021 ◽

pp. 102440

Author(s):

Mohammadamin Ghaderian ◽

Farzad Veysi

Keyword(s):

Energy Efficiency ◽

Thermal Comfort ◽

Office Building ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective ◽

Fitness Approximation

Download Full-text

Multi-objective optimization of squirrel cage fan for range hood based on Kriging model

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science ◽

10.1177/0954406221995863 ◽

2021 ◽

pp. 095440622199586

Author(s):

Qianhao Xiao ◽

Jun Wang ◽

Boyan Jiang ◽

Weigang Yang ◽

Xiaopei Yang

Keyword(s):

Flow Rate ◽

Optimization Design ◽

Volume Flow Rate ◽

Kriging Model ◽

Volume Flow ◽

Design Parameters ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective ◽

Squirrel Cage

In view of the multi-objective optimization design of the squirrel cage fan for the range hood, a blade parameterization method based on the quadratic non-uniform B-spline (NUBS) determined by four control points was proposed to control the outlet angle, chord length and maximum camber of the blade. Morris-Mitchell criteria were used to obtain the optimal Latin hypercube sample based on the evolutionary operation, and different subsets of sample numbers were created to study the influence of sample numbers on the multi-objective optimization results. The Kriging model, which can accurately reflect the response relationship between design variables and optimization objectives, was established. The second-generation Non-dominated Sorting Genetic algorithm (NSGA-II) was used to optimize the volume flow rate at the best efficiency point (BEP) and the maximum volume flow rate point (MVP). The results show that the design parameters corresponding to the optimization results under different sample numbers are not the same, and the fluctuation range of the optimal design parameters is related to the influence of the design parameters on the optimization objectives. Compared with the prototype, the optimized impeller increases the radial velocity of the impeller outlet, reduces the flow loss in the volute, and increases the diffusion capacity, which improves the volume flow rate, and efficiency of the range hood system under multiple working conditions.

Download Full-text