Optimal Photovoltaic System Design with Multi-Objective Optimization

2013 ◽  
Vol 4 (4) ◽  
pp. 63-89 ◽  
Author(s):  
Amin Ibrahim ◽  
Farid Bourennani ◽  
Shahryar Rahnamayan ◽  
Greg F. Naterer
Keyword(s):  
Incident Energy ◽  
State Of The Art ◽  
Photovoltaic System ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Conflicting Objectives ◽  
Generalized Differential ◽  
Maximum Field ◽  
Real World Problems

Recently, several parts of the world suffer from electrical black-outs due to high electrical demands during peak hours. Stationary photovoltaic (PV) collector arrays produce clean and sustainable energy especially during peak hours which are generally day time. In addition, PVs do not emit any waste or emissions, and are silent in operation. The incident energy collected by PVs is mainly dependent on the number of collector rows, distance between collector rows, dimension of collectors, collectors inclination angle and collectors azimuth, which all are involved in the proposed modeling in this article. The objective is to achieve optimal design of a PV farm yielding two conflicting objectives namely maximum field incident energy and minimum of the deployment cost. Two state-of-the-art multi-objective evolutionary algorithms (MOEAs) called Non-dominated Sorting Genetic Algorithm-II (NSGA-II) and Generalized Differential Evolution Generation 3 (GDE3) are compared to design PV farms in Toronto, Canada area. The results are presented and discussed to illustrate the advantage of utilizing MOEA in PV farms design and other energy related real-world problems.

Synthesis of LC-Oscillators Using Rival Multi-Objective Multi-Constraint Optimization Kernels

2015 ◽  
pp. 1-27 ◽  
Author(s):  
Ricardo Póvoa ◽  
Ricardo Lourenço ◽  
Nuno Lourenço ◽  
António Canelas ◽  
Ricardo Martins ◽  
...  
Keyword(s):  
Design Automation ◽  
State Of The Art ◽  
Voltage Controlled Oscillator ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Lc Oscillator ◽  
Lc Oscillators ◽  
Statistical Results ◽  
Multiple Synthesis

This chapter presents a state-of-the-art multi-objective/multi-constraint design automation approach applied to the design of an LC-Voltage Controlled Oscillator and an LC-Oscillator for a 130 nm technology node and leading to sets of design solutions showing figures-of-merit around -192 dBc/Hz and -186 dBc/Hz, respectively. The proposed approach, implemented in AIDA-C, guarantees accuracy by using commercial circuit simulators (HSPICE® and ELDO®) to evaluate the performance of the tentative circuit solutions, where the number of time-consuming circuit simulations is efficiently pruned by the optimization kernel. Three multi-objective optimization algorithms, the NSGA-II, the MOPSO, and the MOSA, are experimented with in the synthesis of the quoted oscillators and compared in terms of performance using statistical results obtained from multiple synthesis runs for each one of the oscillators. The performance of the optimized oscillators is then compared to other state-of-the-art results, showing the benefits of the presented multi-objective design approach.

scholarly journals Classification of Reservoir Recovery Factor for Oil and Gas Reservoirs: A Multi-Objective Feature Selection Approach

2021 ◽  
Vol 9 (8) ◽  
pp. 888
Author(s):  
Qasem Al-Tashi ◽  
Emelia Akashah Patah Akhir ◽  
Said Jadid Abdulkadir ◽  
Seyedali Mirjalili ◽  
Tareq M. Shami ◽  
...  
Keyword(s):  
Feature Selection ◽  
Recovery Factor ◽  
Classification Error ◽  
Grey Wolf Optimizer ◽  
Small Subset ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Conflicting Objectives

The accurate classification of reservoir recovery factor is dampened by irregularities such as noisy and high-dimensional features associated with the reservoir measurements or characterization. These irregularities, especially a larger number of features, make it difficult to perform accurate classification of reservoir recovery factor, as the generated reservoir features are usually heterogeneous. Consequently, it is imperative to select relevant reservoir features while preserving or amplifying reservoir recovery accuracy. This phenomenon can be treated as a multi-objective optimization problem, since there are two conflicting objectives: minimizing the number of measurements and preserving high recovery classification accuracy. In this study, wrapper-based multi-objective feature selection approaches are proposed to estimate the set of Pareto optimal solutions that represents the optimum trade-off between these two objectives. Specifically, three multi-objective optimization algorithms—Non-dominated Sorting Genetic Algorithm II (NSGA-II), Multi-Objective Grey Wolf Optimizer (MOGWO) and Multi-Objective Particle Swarm Optimization (MOPSO)—are investigated in selecting relevant features from the reservoir dataset. To the best of our knowledge, this is the first time multi-objective optimization has been used for reservoir recovery factor classification. The Artificial Neural Network (ANN) classification algorithm is used to evaluate the selected reservoir features. Findings from the experimental results show that the proposed MOGWO-ANN outperforms the other two approaches (MOPSO and NSGA-II) in terms of producing non-dominated solutions with a small subset of features and reduced classification error rate.

scholarly journals Improved NSGA-III with Second-Order Difference Random Strategy for Dynamic Multi-Objective Optimization

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 911
Author(s):  
Haijuan Zhang ◽  
Gai-Ge Wang ◽  
Junyu Dong ◽  
Amir H. Gandomi
Keyword(s):  
State Of The Art ◽  
Second Order ◽  
Test Functions ◽  
Multi Objective Optimization ◽  
Order Difference ◽  
Good Convergence ◽  
Multi Objective ◽  
Random Strategy ◽  
Single Strategy ◽  
Real World Problems

Most real-world problems that have two or three objectives are dynamic, and the environment of the problems may change as time goes on. For the purpose of solving dynamic multi-objective problems better, two proposed strategies (second-order difference strategy and random strategy) were incorporated with NSGA-III, namely SDNSGA-III. When the environment changes in SDNSGA-III, the second-order difference strategy and random strategy are first used to improve the individuals in the next generation population, then NSGA-III is employed to optimize the individuals to obtain optimal solutions. Our experiments were conducted with two primary objectives. The first was to test the values of the metrics mean inverted generational distance (MIGD), mean generational distance (MGD), and mean hyper volume (MHV) on the test functions (Fun1 to Fun6) via the proposed algorithm and the four state-of-the-art algorithms. The second aim was to compare the metrics’ value of NSGA-III with single strategy and SDNSGA-III, proving the efficiency of the two strategies in SDNSGA-III. The comparative data obtained from the experiments demonstrate that SDNSGA-III has good convergence and diversity compared with four other evolutionary algorithms. What is more, the efficiency of second-order difference strategy and random strategy was also analyzed in this paper.

scholarly journals An Ensemble Framework of Evolutionary Algorithm for Constrained Multi-Objective Optimization

Symmetry ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 116
Author(s):  
Junhua Ku ◽  
Fei Ming ◽  
Wenyin Gong
Keyword(s):  
Evolutionary Algorithms ◽  
Real World ◽  
Optimization Problems ◽  
State Of The Art ◽  
Multi Objective Optimization ◽  
The Real ◽  
Multi Objective ◽  
The Past ◽  
Hypervolume Indicator ◽  
Real World Problems

In the real-world, symmetry or asymmetry widely exists in various problems. Some of them can be formulated as constrained multi-objective optimization problems (CMOPs). During the past few years, handling CMOPs by evolutionary algorithms has become more popular. Lots of constrained multi-objective optimization evolutionary algorithms (CMOEAs) have been proposed. Whereas different CMOEAs may be more suitable for different CMOPs, it is difficult to choose the best one for a CMOP at hand. In this paper, we propose an ensemble framework of CMOEAs that aims to achieve better versatility on handling diverse CMOPs. In the proposed framework, the hypervolume indicator is used to evaluate the performance of CMOEAs, and a decreasing mechanism is devised to delete the poorly performed CMOEAs and to gradually determine the most suitable CMOEA. A new CMOEA, namely ECMOEA, is developed based on the framework and three state-of-the-art CMOEAs. Experimental results on five benchmarks with totally 52 instances demonstrate the effectiveness of our approach. In addition, the superiority of ECMOEA is verified through comparisons to seven state-of-the-art CMOEAs. Moreover, the effectiveness of ECMOEA on the real-world problems is also evaluated for eight instances.

scholarly journals An Entropy-Based Multiobjective Evolutionary Algorithm with an Enhanced Elite Mechanism

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
Yufang Qin ◽  
Junzhong Ji ◽  
Chunnian Liu
Keyword(s):  
Evolutionary Algorithm ◽  
Pareto Front ◽  
Optimization Problem ◽  
State Of The Art ◽  
Early Stage ◽  
Test Problems ◽  
Multiobjective Optimization Problem ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective

Multiobjective optimization problem (MOP) is an important and challenging topic in the fields of industrial design and scientific research. Multi-objective evolutionary algorithm (MOEA) has proved to be one of the most efficient algorithms solving the multi-objective optimization. In this paper, we propose an entropy-based multi-objective evolutionary algorithm with an enhanced elite mechanism (E-MOEA), which improves the convergence and diversity of solution set in MOPs effectively. In this algorithm, an enhanced elite mechanism is applied to guide the direction of the evolution of the population. Specifically, it accelerates the population to approach the true Pareto front at the early stage of the evolution process. A strategy based on entropy is used to maintain the diversity of population when the population is near to the Pareto front. The proposed algorithm is executed on widely used test problems, and the simulated results show that the algorithm has better or comparative performances in convergence and diversity of solutions compared with two state-of-the-art evolutionary algorithms: NSGA-II, SPEA2 and the MOSADE.

Multi-Objective Optimization of Piezoelectric Actuator Placement for Shape Control of Plate Using Genetic Algorithms

2008 ◽  
Author(s):  
Rajesh Kudikala ◽  
Deb Kalyanmoy ◽  
Bishakh Bhattacharya
Keyword(s):  
Shape Control ◽  
Optimization Problem ◽  
Piezoelectric Actuators ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Input Control ◽  
Wide Range ◽  
Conflicting Objectives ◽  
Lag Model

Shape control of adaptive structures using piezoelectric actuators has found a wide range of applications in recent years. In this paper, the problem of finding optimal distribution of piezoelectric actuators and corresponding actuation voltages for static shape control of a plate is formulated as a multi objective optimization problem. Two conflicting objectives: minimization of input control energy and minimization of mean square deviation between the desired and actuated shapes are considered with constraints on maximum number of actuators and maximum induced stresses. A shear lag model of the smart plate structure is created and the optimization problem is solved using an evolutionary multi-objective optimization (EMO) algorithm NSGA-II. Pareto-optimal solutions are obtained for different case studies. Further, the obtained solutions are verified by comparing with single-objective optimization solutions.

scholarly journals Multi-Objective Lightweight Optimization of Parameterized Suspension Components Based on NSGA-II Algorithm Coupling with Surrogate Model

Machines ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 107
Author(s):  
Rongchao Jiang ◽  
Zhenchao Jin ◽  
Dawei Liu ◽  
Dengfeng Wang
Keyword(s):  
Ride Comfort ◽  
Lightweight Design ◽  
Dynamic Performance ◽  
Vehicle Dynamic ◽  
Multi Objective Optimization ◽  
Original Design ◽  
Dynamic Simulations ◽  
Nsga Ii ◽  
Torsion Beam ◽  
Multi Objective

In order to reduce the negative effect of lightweighting of suspension components on vehicle dynamic performance, the control arm and torsion beam widely used in front and rear suspensions were taken as research objects for studying the lightweight design method of suspension components. Mesh morphing technology was employed to define design variables. Meanwhile, the rigid–flexible coupling vehicle model with flexible control arm and torsion beam was built for vehicle dynamic simulations. The total weight of control arm and torsion beam was taken as optimization objective, as well as ride comfort and handling stability performance indexes. In addition, the fatigue life, stiffness, and modal frequency of control arm and torsion beam were taken as the constraints. Then, Kriging model and NSGA-II were adopted to perform the multi-objective optimization of control arm and torsion beam for determining the lightweight scheme. By comparing the optimized and original design, it indicates that the weight of the optimized control arm and torsion beam are reduced 0.505 kg and 1.189 kg, respectively, while structural performance and vehicle performance satisfy the design requirement. The proposed multi-objective optimization method achieves a remarkable mass reduction, and proves to be feasible and effective for lightweight design of suspension components.

scholarly journals Design and characterization of effective solar cells

2021 ◽  
Author(s):  
Varun Ojha ◽  
Giorgio Jansen ◽  
Andrea Patanè ◽  
Antonino La Magna ◽  
Vittorio Romano ◽  
...  
Keyword(s):  
Solar Cells ◽  
Quantum Efficiency ◽  
Cost Benefit Analysis ◽  
Cost Minimization ◽  
Cell Structure ◽  
Cost Benefit ◽  
Structure Design ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective

AbstractWe propose a two-stage multi-objective optimization framework for full scheme solar cell structure design and characterization, cost minimization and quantum efficiency maximization. We evaluated structures of 15 different cell designs simulated by varying material types and photodiode doping strategies. At first, non-dominated sorting genetic algorithm II (NSGA-II) produced Pareto-optimal-solutions sets for respective cell designs. Then, on investigating quantum efficiencies of all cell designs produced by NSGA-II, we applied a new multi-objective optimization algorithm II (OptIA-II) to discover the Pareto fronts of select (three) best cell designs. Our designed OptIA-II algorithm improved the quantum efficiencies of all select cell designs and reduced their fabrication costs. We observed that the cell design comprising an optimally doped zinc-oxide-based transparent conductive oxide (TCO) layer and rough silver back reflector (BR) offered a quantum efficiency ($$Q_e$$ Q e ) of 0.6031. Overall, this paper provides a full characterization of cell structure designs. It derives relationship between quantum efficiency, $$Q_e$$ Q e of a cell with its TCO layer’s doping methods and TCO and BR layer’s material types. Our solar cells design characterization enables us to perform a cost-benefit analysis of solar cells usage in real-world applications.

Sign in / Sign up

Export Citation Format

Share Document