scholarly journals Effective Method for Obtaining the Hydrosols of Detonation Nanodiamond with Particle Size < 4 nm

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1285 ◽  
Author(s):  
Andrei Trofimuk ◽  
Diana Muravijova ◽  
Demid Kirilenko ◽  
Aleksandr Shvidchenko
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Synthetic Diamond ◽  
Average Particle Size ◽  
Average Particle ◽  
Detonation Nanodiamond ◽  
New Approach ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

Detonation nanodiamond is a commercially available synthetic diamond that is obtained from the carbon of explosives. It is known that the average particle size of detonation nanodiamond is 4–6 nm. However, it is possible to separate smaller particles. Here we suggest a new approach for the effective separation of detonation nanodiamond particles by centrifugation of a “hydrosol/glycerol” system. The method allows for the production of the detonation nanodiamond hydrosol with a very sharp distribution in size, where more than 85% of particles have a size ranging 1–4 nm. The result is supported by transmission electron microscopy, atomic force microscopy, and dynamic light scattering.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

The Aggregation Study and Characterization of Silver Nanoparticles

2017 ◽  
Vol 263 ◽  
pp. 165-169
Author(s):  
Silvia Chowdhury ◽  
Faridah Yusof ◽  
Nadzril Sulaiman ◽  
Mohammad Omer Faruck
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Silver Nanoparticles ◽  
Absorption Spectrum ◽  
Average Particle Size ◽  
Average Particle ◽  
Transmission Electron ◽  
Vis Spectroscopy

In this article, we have studied the process of silver nanoparticles (AgNPs) aggregation and to stop aggregation 0.3% Polyvinylpyrrolidone (PVP) was used. Aggregation study carried out via UV-vis spectroscopy and it is reported that the absorption spectrum of spherical silver nanoparticles were found a maximum peak at 420 nm wavelength. Furthermore, Transmission Electron Microscopy (TEM) were used to characterized the size and shape of AgNPs, where the average particle size is around 10 to 25 nm in diameter and the AgNPs shape is spherical. Next, Dynamic Light Scattering (DLS) were used, owing to observed size distribution and self-correlation of AgNPs.

Analysis of the Promoter-Catalyst interaction between Mn and Rh by Transmission Electron Microscopy

2014 ◽  
Vol 7 (1) ◽  
Author(s):  
B. Graham ◽  
R.F. Klie
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Average Particle Size ◽  
Lattice Parameter ◽  
Average Particle ◽  
Fischer Tropsch ◽  
Transmission Electron ◽  
Three Samples ◽  
Promoter Interaction

In the hope of optimizing the Fischer-Tropsch mechanism to produce cleaner ethanol, the catalyst- promoter interaction between rhodium and manganese was examined by transmission electron microscopy. Three samples were analyzed on a carbon nanotube (CNT) substrate with 3 wt% rhodium (3%Rh/CNT), 1% manganese with 3 wt% rhodium (1%Mn/3% Rh/CNT), and 2% manganese with 3 wt% rhodium (2% Mn/3% Rh/CNT). The average particle size were found to be (1.9 ± 0.6) nm, (2.1 ± 0.5) nm, and (3.2 ± 0.6) nm, respectively. An increase in particle size indicates that the rhodium and manganese are interacting. The lattice parameter for rhodium were also determined to be (4.1 ± 0.1) Å, (4.2 ± 0.1) Å, and (3.8 ± 0.1) Å, respectively. The decrease in lattice parameter in the 2%Mn/3%Rh/CNT sample was most likely due to a change in the crystal structure of the rhodium particles as a result of the interaction between the manganese and rhodium.

Investigation of ZnFe2O4 Nanoparticles Prepared by High Energy Milling

2009 ◽  
Author(s):  
S. S. Srinivasan ◽  
N. Kislov ◽  
Yu. Emirov ◽  
D. Y. Goswami ◽  
E. K. Stefanakos
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Energy Gap ◽  
Blue Shift ◽  
High Energy ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Coefficient Estimation ◽  
Transmission Electron

Nanoparticles of Zinc Ferrite (ZnFe2O4) prepared by both wet- and dry- high-energy ball milling (HEBM), have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), surface area and pore size distribution (BET) and wavelength-dependent diffuse reflectance and scattering turned into absorption coefficient estimation using the Kubelka-Munk theory. It was found that after 72 hours of HEBM, the particle size was decreased from 220 nm for the initial material to 16.5 nm and 9.4 nm for the wet- and dry-milled samples, respectively. The optical absorption analysis revealed that the energy gap is increased (blue shift) by 0.45 eV for wet-milled and decreased (“anomalous” red shift) by 0.15 eV for dry-milled samples of ZnFe2O4 as the particle size decreased.

Biosynthesis of silver nanoparticles by usingGanoderma-mushroom extract

2015 ◽  
Vol 29 (06n07) ◽  
pp. 1540047 ◽  
Author(s):  
S. U. Ekar ◽  
Y. B. Khollam ◽  
P. M. Koinkar ◽  
S. A. Mirji ◽  
R. S. Mane ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Silver Nanoparticles ◽  
Average Particle Size ◽  
Average Particle ◽  
Medicinal Mushroom ◽  
Ag Nps ◽  
Transmission Electron ◽  
Uv Visible

Present study reports the biochemical synthesis of silver nanoparticles ( Ag -NPs) from aqueous medium by using the extract of medicinal mushroom Ganoderma, as a reducing and stabilizing agents. The Ag -NPs are prepared at room temperature by the reduction of Ag+to Ag in aqueous solution of AgNO3. The resultant particles are characterized by using UV-visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM) measurement techniques. The formation of Ag -NPs is confirmed by recording the UV-visible absorption spectra for surface plasmon resonance (SPR) where peak around 427 nm. The prominent changes observed in FTIR spectra supported the reduction of Ag+to Ag . The morphological features of Ag -NPs are evaluated from HRTEM. The spherical Ag -NPs are observed in transmission electron microscopy (TEM) studies. The particle size distribution is found to be nearly uniform with average particle size of 2 nm. The Ag -NPs aged for 15, 30, 60 and 120 days showed no profound effect on the position of SPR peak in UV-visible studies, indicating the protecting/capping ability of medicinal mushroom Ganoderma in the synthesis of Ag -NPs.

Extracting Metals with Carbon Nanotubes: Environmental Possibilities

2015 ◽  
Vol 663 ◽  
pp. 157-165
Author(s):  
Francisco J. Alguacil ◽  
Arisbel Cerpa ◽  
Maria Isabel Lado ◽  
Félix López
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Adsorption Processes ◽  
Materials Studio ◽  
Adsorbent Particle

This paper presents a review of the environmental possibilities of using carbon nanotubes (CNTs) for extracting metals, taken into account the characteristics of carbon nanotubes to be used as adsorbents and the influence of different factors on the adsorption processes, among them: kind of carbon nanotubes used as adsorbent, particle size, pH of solutions and diameter and length of carbon nanotubes. Also, some images of transmission electron microscopy (TEM), atomic force microscopy (AFM) and molecular modeling (Materials Studio Software) obtained by our research group are presented.

Determine the Average Particle Size of Silica Sol

2014 ◽  
Vol 997 ◽  
pp. 312-316
Author(s):  
Xue Ming Zheng ◽  
Xiao Na Duan ◽  
Yang Yang Sun ◽  
Hui Jian Shang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Average Particle Size ◽  
Silica Sol ◽  
Comprehensive Analysis ◽  
Average Particle ◽  
Small Particles ◽  
Titration Method ◽  
Transmission Electron

At present, the methods of analysising the average particle size of silica sol are the intuitive analysis, such as analysising the size distribution and morphology of the particle by the laser particle size instrument and the transmission electron microscopy. But some of the small particles tend to be ignored. Using the classical chemical titration method and BET to auxiliary analysis can make the date more complete. Through the comprehensive analysis with the four methods, found that longer reaction time have the effect of purification of sol system.

scholarly journals Green Synthesis and the Study of Some Physical Properties of MgO Nanoparticles and Their Antibacterial Activity

2020 ◽  
pp. 266-276
Author(s):  
Rand Ali ◽  
Zainab Jassim ◽  
Ghada Muhammad Saleh ◽  
Quraysh Abass
Keyword(s):  
Particle Size ◽  
Antibacterial Activity ◽  
Energy Gap ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Magnesium Nitrate ◽  
Average Particle ◽  
Force Microscopy ◽  
Atomic Force ◽  
The Impact

     Magnesium oxide nanoparticles (MgO NPs) were synthesized by a green method using the peels of Persimmon extract as the reducing agent , magnesium nitrate, and NaOH. This method is eco-friendly and non-toxic. In this study, an ultrasound device was used to reduce the particle size, with the impact on the energy gap was set at the beginning at 5.39 eV and then turned to 4.10 eV. The morphological analysis using atomic force microscopy (AFM)  showed that the grain size for MgO NPs was 67.70 nm which became 42.33 nm after the use of the ultrasound. The shape of the particles was almost spherical and became cylindrical.  In addition the Field-Emission Scanning Electron Microscopy (FESEM) analysis showed that the average particle size was reduced and the spherical shape was changed into cylindrical flakes. The antibacterial activity of MgO Nps was measured against both gram positive and negative bacteria (Staphylococcus aureus and Escherichia coli, respectively) for both the synthesized and the scaled-down particles by the ultrasonic. MgO NPs showed an efficacy at a minimum inhibitory concentration (MIC) of 500 μg/ml, with the better effect being observed after the ultrasonic treatment of the MgO NPs.

A novel organothermal reduction process for producing nanocrystalline Ni2P with a circular-shaped flake morphology

1998 ◽  
Vol 13 (12) ◽  
pp. 3365-3367 ◽  
Author(s):  
Shu-Hong Yu ◽  
Jian Yang ◽  
Yong-Sheng Wu ◽  
Zhao-Hui Han ◽  
Lei Shu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Powder Diffraction ◽  
Average Particle Size ◽  
Reduction Process ◽  
Average Particle ◽  
X Ray ◽  
Transmission Electron ◽  
A Cell

An organothermal reduction process has been successfully developed for synthesis of nanocrystalline Ni2P in benzene at 140 °C. An x-ray powder diffraction pattern (XRD) indicated that the product was pure hexagonal Ni2P phase with a cell constants a =0.5866 and c = 0.3377 nm. Transmission electron microscopy (TEM) showed that the average particle size of the powders was 40 nm with a circular-shaped flake morphology.

scholarly journals Synthesis of Pure Nano semiconductor Oxide ZnO with Different AgNO3 Concentrations

2017 ◽  
Vol 14 (2) ◽  
pp. 379-389
Author(s):  
Baghdad Science Journal
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Zinc Nitrate ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Agno3 Solution ◽  
Atomic Force ◽  
Scanning Electron

Zinc oxide nanoparticles sample is prepared by the precipitation method. This method involves using zinc nitrate and urea in aqueous solution, then (AgNO3) Solution with different concentrations is added. The obtained precipitated compound is structurally characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). The average particle size of nanoparticles is around 28nm in pure, the average particle size reaches 26nm with adding AgNO3 (0.05g in100ml =0.002 M) (0.1g in100ml=0.0058M), AgNO3 (0.2g in 100ml=0.01M) was 25nm. The FTIR result shows the existence of -CO, -CO2, -OH, and -NO2- groups in sample and oxides (ZnO, Ag2O).and used an atomic force microscope and microscope scanning electron to model the record.

Sign in / Sign up

Export Citation Format

Share Document