scholarly journals Analysis of the Influence of Blanking Clearance on the Wear of the Punch, the Change of the Burr Size and the Geometry of the Hook Blanked in the Hardened Steel Sheet

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1261 ◽  
Author(s):  
Jacek Mucha ◽  
Jacek Tutak
Keyword(s):  
Steel Sheet ◽  
Cold Work ◽  
Sheet Thickness ◽  
Tool Materials ◽  
Burr Size ◽  
Thin Steel ◽  
Bending Radius ◽  
Friction Path ◽  
Cold Work Tool Steel ◽  
Selection Of

In this thesis, the results of an experimental analysis of blanking angled hooks with a punch of a sloping face in a thin steel sheet with a hardness of 55 HRC are presented. The blanking punch was made of K340 cold-work tool steel. Tests were carried out for three values of clearance, 5%, 10%, and 15% of sheet thickness. The results of the analysis of the influence of the number of cuts made by the punch on the growth of the burr at the sheet edge were presented. Moreover, the influences of the clearance on the initial values of burr (bh), deflection (Hb), and the bending radius (Rb) of the hook have been shown. The influence of the friction path on the intensity of degradation of working surfaces and the blanking edges of the punch was also demonstrated. The obtained results allow the selection of the proper clearance and new tool materials for blanking blades working in particularly difficult tribological conditions.

UNS T30407

Alloy Digest ◽  
1985 ◽  
Vol 34 (4) ◽  
Keyword(s):  
Tool Steel ◽  
Vanadium Carbide ◽  
Cold Work ◽  
Heat Treating ◽  
Cold Extrusion ◽  
High Carbon ◽  
Extrusion Dies ◽  
Steel Mills ◽  
Aisi Type ◽  
Cold Work Tool Steel

Abstract UNS No. T30407 is a high-carbon chromium cold-work tool steel containing vanadium (4.0%) and molybdenum (1.0%). Its carbon and vanadium form a vanadium carbide that provides war resistance many times greater than that of UNS No. T30403 (AISI Type D3). UNS No. T30407 was developed for applications where extreme abrasive wear is needed. Its many applications include briquetting dies and punches, brick mold liners, pottery, tools, broaches, meat-chopper plates and cold-extrusion dies. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-439. Producer or source: Tool steel mills.

CYCLOPS SCK

Alloy Digest ◽  
1979 ◽  
Vol 28 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Optimum Combination ◽  
Cold Work Tool Steel ◽  
Minimum Distortion

Abstract CYCLOPS SCK is a cold-work tool steel with a balanced composition to provide air hardening and an optimum combination of toughness, wear resistance and minimum distortion during heat treatment. Typical applications are shear blades, trimming dies and forming rolls, including grade rolls for cutlery and flatware. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-346. Producer or source: Cyclops Corporation.

BÖHLER K100

Alloy Digest ◽  
2020 ◽  
Vol 69 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Chromium ◽  
Cold Work Tool Steel

Abstract Böhler K100 is a high-carbon, high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and machining. Filing Code: TS-788. Producer or source: voestalpine Böhler Edelstahl GmbH & Co.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2067

Alloy Digest ◽  
2020 ◽  
Vol 69 (2) ◽  
Keyword(s):  
Cold Work ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Dimensional Changes ◽  
Short Run ◽  
Quench Hardening ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2067 is a high-carbon, 1.5% chromium, alloy cold-work tool steel. In view of its higher hardenability than that of the non-alloy, water-hardening, cold work tool steels, this steel can be oil quenched, a factor that minimizes dimensional changes during quench hardening. Cryodur 2067 is suitable for short run tooling in applications requiring high surface hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-786. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

LUCEFIN GROUP C45U (1.1730)

Alloy Digest ◽  
2020 ◽  
Vol 69 (1) ◽  
Keyword(s):  
High Temperature ◽  
Cold Work ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Temperature Performance ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Cold Work Tool Steel

Abstract Lucefin Group C45U is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heat-treated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability, C45U develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming and joining. Filing Code: TS-784. Producer or source: Lucefin S.p.A.

HITACHI METALS SLD-MAGIC

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Performance ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Performance ◽  
Mold Fabrication ◽  
Cold Work Tool Steel

Abstract Hitachi Metals SLD-Magic is a high-performance alloy cold-work tool steel that is characterized by improved mold lifespan and easy mold fabrication. This datasheet provides information on composition, physical properties, hardness, elasticity as well as fatigue. It also includes information on low and high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-802. Producer or source: Hitachi Metals Ltd.

BOEHLER K294 MICROCLEAN

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Powder Metal ◽  
Cold Work Tool Steel

Abstract Böhler K294 Microclean is a powder metallurgically produced cold work tool steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and powder metal forms. Filing Code: TS-702. Producer or source: Böhler-Uddeholm Corporation.

CRYODUR 2550

Alloy Digest ◽  
2019 ◽  
Vol 68 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Cold Work Tool Steel

Abstract Cryodur 2550 cold work tool steel for cutting, punching, and folding. This datasheet provides information on composition, physical properties, and hardness. It also includes information on joining. Filing Code: TS-774. Producer or source: Schmolz + Bickenbach USA Inc..

LESCOWEAR

Alloy Digest ◽  
2005 ◽  
Vol 54 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Cold Work Tool Steel

Abstract Lescowear is a medium-chromium-containing air-hardening cold-work tool steel. It is a versatile alloy with a combination of toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-623. Producer or source: Timken Latrobe Steel.

VANADIS 4

Alloy Digest ◽  
1991 ◽  
Vol 40 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
High Performance ◽  
Cold Work ◽  
Heat Treating ◽  
Good Combination ◽  
Bend Strength ◽  
Cold Work Tool Steel

Abstract VANADIS 4 is a high performance cold work tool steel made by powder metallurgy. It offers an extremely good combination of resistance and toughness for high performance tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and bend strength as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: TS-506. Producer or source: Uddeholm Corporation.

Sign in / Sign up

Export Citation Format

Share Document