scholarly journals Dual-Band Transmissive Cross-Polarization Converter with Extremely High Polarization Conversion Ratio Using Transmitarray

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1827 ◽  
Author(s):  
Jianxing Li ◽  
Jialin Feng ◽  
Bo Li ◽  
Hongyu Shi ◽  
Anxue Zhang ◽  
...  
Keyword(s):  
Cell Structure ◽  
Conversion Ratio ◽  
Transmitted Wave ◽  
Dual Band ◽  
Polarization Conversion ◽  
Cross Polarization ◽  
Polarization Converter ◽  
Linearly Polarized ◽  
The Cross ◽  
Incident Waves

In this paper, a dual-band cross-polarization converter is proposed. The proposed device can convert linearly polarized incident waves to their cross-polarized transmitted waves. Inspired by the aperture coupled transmitarray, a transmissive multi-layered unit cell structure was designed, which can operate in two frequency bands. The designed structure can manipulate the polarization of the transmitted wave into the cross-polarization of the incident waves at 10.36 GHz and 11.62 GHz. The cross-polarized transmittance of the proposed cross-polarization converter is higher than 0.93. In addition, the transmitted wave has an extremely low co-polarized component, which results in a nearly 100% polarization conversion ratio. The two working frequencies can be tuned independently. The proposed cross-polarization converter was simulated, fabricated and measured. The simulation results confirm with the measurement results.

scholarly journals Band-Pass Filtering Cross-Polarization Converter Using Transmitarrays

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2109
Author(s):  
Jialin Feng ◽  
Hongyu Shi ◽  
Jianjia Yi ◽  
Anxue Zhang ◽  
Zhuo Xu
Keyword(s):  
Conversion Ratio ◽  
Polarization Conversion ◽  
Cross Polarization ◽  
Polarization Converter ◽  
Transmission Zeros ◽  
Rejection Level ◽  
Band Pass ◽  
Simulation Results ◽  
Polarization Converters ◽  
Good Agreement

Microwave devices with polarization conversion and band-pass filtering response have great application prospects on radomes. Here, the concepts of band-pass filters and cross-polarization converters are combined to realize a band-pass filtering cross-polarization converter with an extremely high polarization-conversion ratio. Most importantly, the device has an excellent out-of-band rejection level, above 30 and 40 dB for the lower and upper edges, respectively. In addition, the transmission zeros of the passband can be flexibly tuned independently. The band-pass filtering polarization converter was simulated, fabricated, and measured, and the measured results were found to be in good agreement with the simulation results.

scholarly journals High-Efficiency Dual-Frequency Reflective Linear Polarization Converter Based on Metasurface for Microwave Bands

2019 ◽  
Vol 9 (9) ◽  
pp. 1910 ◽  
Author(s):  
Changfeng Fu ◽  
Zhijie Sun ◽  
Lianfu Han ◽  
Chao Liu ◽  
Tao Sun ◽  
...  
Keyword(s):  
Linear Polarization ◽  
Dielectric Layer ◽  
High Efficiency ◽  
Conversion Ratio ◽  
Polarization Conversion ◽  
Dual Frequency ◽  
Polarization Converter ◽  
Polarization Control ◽  
Polarized Waves ◽  
Incident Waves

A dual-broadband and high-efficiency reflective linear polarization converter based on an anisotropic metasurface is presented. The device consists of two symmetrical, double-slotted metallic split-rings and one criss-cross structure, a dielectric layer, and a completely reflective metallic ground. The converter exhibits four resonances and can near-perfectly convert x- or y-polarized incident waves into cross-polarized waves in the frequency ranges of 9.38–13.36 GHz and 14.84–20.36 GHz. The polarization conversion ratios (PCRs) of the two bands are 98.21% and 99.32%, respectively. The energy conversion ratio (ECR) for energy loss measurement is almost 100% in these frequency bands. The polarization conversion principle is studied. The bandwidths and PCRs of the two bands are determined by varying the dielectric layer thickness. The simulation results are consistent with experimental observations. The designed dual-broadband and high-efficiency metasurface has great potential in the application of electromagnetic polarization control.

scholarly journals Simple design of efficient broadband multifunctional polarization converter for X-band applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Thi Kim Thu Nguyen ◽  
Thi Minh Nguyen ◽  
Hong Quang Nguyen ◽  
Thanh Nghia Cao ◽  
Dac Tuyen Le ◽  
...  
Keyword(s):  
Circular Polarization ◽  
Incident Angle ◽  
Polarization Conversion ◽  
Simple Design ◽  
Cross Polarization ◽  
Polarization Converter ◽  
Frequency Bands ◽  
X Band ◽  
Cost Efficient ◽  
Patch Resonators

AbstractA simple design of a broadband multifunctional polarization converter using an anisotropic metasurface for X-band application is proposed. The proposed polarization converter consists of a periodic array of the two-corner-cut square patch resonators based on the FR-4 substrate that achieves both cross-polarization and linear-to-circular polarization conversions. The simulated results show that the polarization converter displays the linear cross-polarization conversion in the frequency range from 8 to 12 GHz with the polarization conversion efficiency above 90%. The efficiency is kept higher than 80% with wide incident angle up to 45°. Moreover, the proposed design achieves the linear-to-circular polarization conversion at two frequency bands of 7.42–7.6 GHz and 13–13.56 GHz. A prototype of the proposed polarization converter is fabricated and measured, showing a good agreement between the measured and simulated results. The proposed polarization converter exhibits excellent performances such as simple structure, multifunctional property, and large cost-efficient bandwidth and wide incident angle insensitivity in the linear cross polarization conversion, which can be useful for X-band applications. Furthermore, this structure can be extended to design broadband polarization converters in other frequency bands.

Reflective and transmissive cross-polarization converter for terahertz wave in a switchable metamaterial

2021 ◽  
Author(s):  
Yuanyuan Jiang ◽  
Man Zhang ◽  
Weihua Wang ◽  
Zhengyong Song
Keyword(s):  
Vanadium Dioxide ◽  
High Efficiency ◽  
Incident Angle ◽  
Terahertz Wave ◽  
Polarization Conversion ◽  
Cross Polarization ◽  
Polarization Converter ◽  
Metallic Grating ◽  
Vanadium Dioxide Film ◽  
Wave Conversion

Abstract Utilizing the phase transition characteristic of vanadium dioxide, we present a metamaterial configuration to achieve both reflective and transmissive cross-polarization converters. When vanadium dioxide is metal, the design behaves as a reflective cross-polarization converter. It consists of metallic grating, topas spacer, and vanadium dioxide film. Polarization conversion ratio is more than 90% in the frequency range from 4.80 THz to 13.13 THz. When vanadium dioxide is insulator, the design behaves as a transmissive cross-polarization converter using cascaded metallic gratings with rotation angle . High-efficiency broadband cross-polarization wave conversion is achieved in the frequency band of 0.50-4.75 THz. The effects of oblique incidence on reflective and transmissive modes are studied on polarization conversion. The results tell that cross-polarization conversion is better when incident angle is in the range of -. The designed metamaterial may have a certain inspiration for the research of terahertz multifunctional polarization converter.

scholarly journals Dual-Band Patch Antenna Fed by Meandering Probe for Low Cross-Polarization

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Xiao-Lan Zhao ◽  
Quan Wei Lin
Keyword(s):  
Reflection Coefficient ◽  
Patch Antenna ◽  
Dual Band ◽  
Cross Polarization ◽  
Frequency Range ◽  
Face To Face ◽  
Resonance Modes ◽  
The Cross ◽  
Polarization Level

This paper presents a dual-band patch antenna loaded with face-to-face U-shaped slots fed by a substrate-integrated meandering probe (SIM-probe). With the presence of U-shaped slots, two current paths are formed, which leads to the resonance modes at 2.4 and 3.65 GHz on the patch. The SIM-probe suppresses the unwanted cross-polarization radiations by providing out-of-phase vertical currents from vertical metallic vias. To verify our work, a prototype was fabricated and tested. The proposed antenna achieves the impedance bandwidths of 9.4% and 9% from the frequency range of 2.34–2.57 GHz and 3.5–3.83 GHz (for the reflection coefficient ≤ −10 dB) and obtains average gains of 5.8 dBi and 6.8 dBi at both bands. The cross-polarization level is below −20 dB. Measured results agree well with the simulation.

scholarly journals High-Efficiency Asymmetric Transmission of Red-Near-Infrared Light Based on Chiral Metamaterial

2021 ◽  
Vol 9 ◽  
Author(s):  
Yu Tian ◽  
Zhiwei Chen ◽  
Fang-Fang Ren ◽  
Qingguo Du ◽  
Zhengying Li
Keyword(s):  
Communication Systems ◽  
High Efficiency ◽  
Polarized Light ◽  
Infrared Light ◽  
Polarization Conversion ◽  
Metamaterial Structure ◽  
Polarization Converter ◽  
Asymmetric Transmission ◽  
Linearly Polarized ◽  
Chiral Metamaterial

Designing and fabricating high-performance polarization converters that exhibit asymmetric transmission (AT), for light with different circularly/linearly polarized states with opposite propagating directions, are in high demand. The AT phenomenon leads to potential applications as isolators and circulators in information and communication systems. We propose a chiral metamaterial structure with high AT efficiency for two types of linearly orthogonal polarized red-near-IR light in two opposite incident directions. Theoretical results showed that the proposed chiral metamaterial structure achieves cross-polarization conversion where the polarization conversion ratio (PCR) is over 90%, in a broadband wavelength range from 715 to 810 nm, for both forward-propagating linearly polarized light and backward-propagating orthogonal linearly polarized light. The physical mechanisms of the polarization converter with the AT have been investigated. It was confirmed that the Fabry–Perot-like resonance and coupling between electric and magnetic dipoles lead to highly efficient asymmetric polarization conversion for two orthogonal linearly polarized light. Additionally, the conversion efficiency and bandwidth of the polarization converter are successfully optimized by adjusting the related structure parameters.

Sign in / Sign up

Export Citation Format

Share Document