scholarly journals Microwave Absorption Properties of Magnetite Particles Extracted from Nickel Slag

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2162
Author(s):  
Pengze Yan ◽  
Yongqian Shen ◽  
Xueyan Du ◽  
Junkai Chong
Keyword(s):  
Electron Microscopy ◽  
Ball Milling ◽  
Microwave Absorption ◽  
Photoelectron Spectroscopy ◽  
Magnetic Loss ◽  
Interfacial Polarization ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
X Ray ◽  
Transmission Electron

The utilization of nickel slag has attracted much attention due to its high-content of valuable elements. As a part of these efforts, this work focuses on whether magnetite crystals, obtained from nickel slag via molten oxidation, magnetic separation, and ball-milling can be used as a microwave absorber. The composition, morphology, microstructure, magnetic properties, and microwave absorption performance were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and vector network analysis (VNA). The results reveal that the magnetite crystals exhibit excellent microwave absorption properties because of the synergistic action between dielectric loss and magnetic loss. The minimum reflection loss (RL) of the particles obtained after 6 h ball-milling reaches −34.0 dB at 16.72 GHz with thickness of 5 mm. The effective frequency bandwidth (RL ≤ −10 dB) is 4.8–5.4 GHz and 15.9–17.6 GHz. Interfacial polarization of the particles could play a crucial role in improving absorbing properties because several components contained in the particles can dissipate electromagnetic wave effectively. The current study could show great potential in the preparation of magnetite crystals and utilization of nickel slag.

Synthesis and Excellent Microwave Absorption Properties of ZnO/Fe3O4/MWCNTs Composites

NANO ◽  
2016 ◽  
Vol 11 (12) ◽  
pp. 1650139 ◽  
Author(s):  
Lei Wang ◽  
Honglong Xing ◽  
Zhenfeng Liu ◽  
Ziyao Shen ◽  
Xiang Sun ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Microwave Absorption ◽  
Photoelectron Spectroscopy ◽  
Wave Attenuation ◽  
Impedance Matching ◽  
Interfacial Polarization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Zno Nanocrystals ◽  
Transmission Electron

ZnO nanocrystals were introduced into Fe3O4/MWCNTs composites to improve the impedance matching and electromagnetic (EM) wave attenuation of the system. The as-synthesized ZnO/Fe3O4/MWCNTs composites were characterized by X-ray diffraction, vibrating sample magnetometer, field-emission scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy. SEM and TEM images showed that Fe3O4 microspheres 100–200[Formula: see text]nm in size connected MWCNTs. Analysis of EM parameters revealed that the impedance matching of the ZnO/Fe3O4/MWCNTs composites was considerably improved after ZnO nanocrystals were introduced. The ZnO/Fe3O4/MWCNTs composites exhibited a highly efficient microwave absorption (MA) capacity within the tested frequency range of 2–18[Formula: see text]GHz. The optimal reflection loss of EM waves was [Formula: see text][Formula: see text]dB at 6.08[Formula: see text]GHz with an absorber thickness of 3.5[Formula: see text]mm. The excellent MA properties of the composites could be attributed to the improved impedance matching, interfacial polarization, and combined effects of dielectric and magnetic losses.

Prepared and Microwave-Absorption Properties Investigation of χ-C-Fe-Si/SiC Coated Fe Nanocapsules

2009 ◽  
Vol 79-82 ◽  
pp. 743-746 ◽  
Author(s):  
Gui Mei Shi ◽  
Jin Hu Zhang ◽  
Shu Lian ◽  
Ge Song ◽  
Jin Bing Zhang
Keyword(s):  
Electron Microscopy ◽  
Reflection Loss ◽  
Photoelectron Spectroscopy ◽  
Network Analyzer ◽  
Absorber Thickness ◽  
Frequency Range ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
X Ray ◽  
Transmission Electron

-C-Fe-Si/SiC coated Fe nanocapsules were prepared by arc evaporating the mixture of Fe and SiC powders in He and H2 atmosphere, and their microstructure, surface compositions and electromagnetic(EM) properties(2–18GHz) were investigated by means of high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and network analyzer, respectively. The reflection loss R of less than –20 dB was obtained in the frequency range of 3.13–13.6 GHz with an absorber thickness of 2.0–5.5 mm. An optimal reflection loss of–37.2 dB was reached at 5.6GHz with an absorber thickness of 4.5mm. The microwave absorptive mechanisms of -C-Fe-Si/SiC coated Fe nanocapsules absorbent were discussed.

scholarly journals Excellent Microwave Absorption Properties Derived from the Synthesis of Hollow Fe3o4@Reduced Graphite Oxide (RGO) Nanocomposites

Nanomaterials ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 141 ◽  
Author(s):  
Guangzhen Cui ◽  
Yanli Lu ◽  
Wei Zhou ◽  
Xuliang Lv ◽  
Jiangnan Hu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Microwave Absorption ◽  
Reflection Loss ◽  
Graphite Oxide ◽  
Photoelectron Spectroscopy ◽  
Impedance Matching ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
X Ray ◽  
Reduced Graphite Oxide

Magnetic nanoparticles, such as Fe3O4 and Co3O4, play a vital role in the research on advanced microwave absorbing materials, even if problems such as high density and narrow band impedance matching are still unsolved. Herein, the study of lightweight hollow Fe3O4@reduced graphite oxide (RGO) nanocomposites synthesized via the solvothermal method is presented. The microstructure and crystal morphology of the materials were characterized by X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analyses. Single crystalline hollow Fe3O4 spheres were grown onto RGO flakes, leading to the formation of heterojunction, which further influenced the microwave absorption properties. The latter were evaluated by standard microwave characterization in the frequency range of 2–18 GHz. It was found that, for a specific [email protected] g RGO composite, the minimum reflection loss can reach −41.89 dB at 6.7 GHz, while the reflection loss was less than −10 dB from 3.4 GHz to 13.6 GHz for a nanocomposite sample thickness in the range of 1–4 mm. The combination of these two materials thus proved to give remarkable microwave absorption properties, owing to enhanced magnetic losses and favorable impedance matching conditions.

Synthesis, Characterization, and Microwave Absorption Properties of SrFe12O19 Ferrites and FeNi3 Nanoplatelets Composites

2010 ◽  
Vol 148-149 ◽  
pp. 893-896 ◽  
Author(s):  
Ze Yang Zhang ◽  
Xiang Xuan Liu ◽  
You Peng Wu
Keyword(s):  
Electron Microscopy ◽  
Microwave Absorption ◽  
Composite Coatings ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Absorption Properties ◽  
Filling Fraction ◽  
Microwave Absorption Properties ◽  
Phase Reduction ◽  
Transmission Electron

M-typical SrFe12O19 ferrites and FeNi3 nanoplatelets were successfully prepared by the sol-gel method and solution phase reduction method, respectively. The crystalline and morphology of particles were studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The composite coatings with SrFe12O19 ferrites and FeNi3 nanoplatelets in polyvinylchloride matrix were prepared. The microwave absorption properties of these coatings were investigated in 2-18GHz frequency range. The results showed that the M-typical SrFe12O19 ferrites and FeNi3 nanoplatelets were obtained and they presented irregular sheet shapes. With the increase of the coating thickness, the absorbing peak value moves to the lower frequency. The absorbing peak values of the wave increase along with the increasing of the content of FeNi3 nanoplatelets filling fraction. When 40% SrFe12O19 ferrites is doped with 20% mass fraction FeNi3 nanoplatelets to prepare composite with 1.5mm thickness, the maximum reflection loss is -24.8 dB at 7.9GHz and the -10 dB bandwidth reaches 3.2GHz.

MICROWAVE ABSORPTION BEHAVIOR OF MESOPOROUS TRANSITION METAL OXIDE TEMPLATED FROM SBA-15 AND KIT-6

2014 ◽  
Vol 28 (10) ◽  
pp. 1450037 ◽  
Author(s):  
HONGJING WU ◽  
LIUDING WANG ◽  
YIMING WANG
Keyword(s):  
Electron Microscope ◽  
Microwave Absorption ◽  
Absorption Characteristic ◽  
Chemical Compositions ◽  
X Ray Diffraction ◽  
Hard Template ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
X Ray ◽  
Transmission Electron

In this paper, we have synthesized meso-oxides (i.e., Co 3 O 4 and NiO ) by using mesoporous silica as hard template. The microstructures and chemical compositions of the corresponding meso-oxides were characterized by the Transmission electron microscope-selected area electron diffusion (TEM-SAED), X-ray diffraction (XRD), scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDS), respectively. And, their electromagnetic and microwave absorption properties were investigated in the frequency range of 2–18 GHz. The results indicate that meso-oxide templated from KIT-6 (i.e., meso-K– Co / Ni ) exhibit a dual absorption characteristic compared with those using SBA-15 as hard template. This phenomenon suggests that meso-oxides templated from SBA-15 and KIT-6 can exhibit different microwave absorption behaviors due to their respective microstructures.

Fabrication and Microwave Characteristics of Fe3O4/C Composites

2012 ◽  
Vol 430-432 ◽  
pp. 146-149 ◽  
Author(s):  
Wen Wang ◽  
Cheng Guo Wang ◽  
Yu Guo
Keyword(s):  
Microwave Absorption ◽  
Magnetic Loss ◽  
Carbon Matrix ◽  
X Ray Diffraction ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
X Ray ◽  
Heat Treated ◽  
Different Temperatures ◽  
Microwave Characteristics

Fe3O4/C composites were prepared by using Fe and polyacrylonitrile (PAN) as precursors, and then heat-treated at temperatures of 600,700 and 800 °C, respectively. The phase composition of the composites at different temperatures was analyzed by X-ray diffraction, and Fe reacted with O from PAN to form Fe3O4, which contributed to the improvement of magnetic loss of the carbon matrix. Electromagnetic and microwave absorption properties of the composites were investigated. The results show that the values of real and imaginary part of permittivity were all increased as the temperature increasing, and also the microwave absorption capability was improved.

Enhanced Microwave Absorption Properties of Metal Organic Framework (MOF)-Derived Carbonaceous ZnO Incorporated Reduced Graphene Oxide Composites

NANO ◽  
2019 ◽  
Vol 14 (01) ◽  
pp. 1950005 ◽  
Author(s):  
Zhongfei Liu ◽  
Jiangtao Yuan ◽  
Hui Zhang ◽  
Kuangwei Xiong ◽  
Shaowei Jin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Metal Organic Framework ◽  
X Ray Diffraction ◽  
Microwave Absorption Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Metal Organic ◽  
Oxide Composites

In this paper, the MOFs-derived carbonaceous ZnO and RGO (carbonaceous ZnO/RGO) composites have been prepared by the wet chemical method and carbonization process. The as-prepared products are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), Raman spectra, thermogravimetric (TG) analysis and X-ray photoelectron spectroscopy (XPS). The electromagnetic parameters of carbonaceous ZnO/RGO composites are investigated by the vector network analyzer. The results exhibit carbonaceous ZnO/RGO composites have a maximum absorption of [Formula: see text][Formula: see text]dB at 6[Formula: see text]GHz with thickness of 3.5[Formula: see text]mm and the effective absorption (below [Formula: see text][Formula: see text]dB) bandwidth is up to 1.92[Formula: see text]GHz (from 5.28 to 7.2[Formula: see text]GHz). Thus, the carbonaceous ZnO/RGO composites have great potential in the field of electromagnetic wave absorption.

Preparation and Electromagnetic Wave Absorption Properties of Core-Shell Ni/TiO2 Microspheres

2014 ◽  
Vol 602-603 ◽  
pp. 762-766
Author(s):  
Biao Zhao ◽  
Bing Bing Fan ◽  
Hao Chen ◽  
Xiao Xuan Pian ◽  
Bin Bin Wang ◽  
...  
Keyword(s):  
Electromagnetic Wave ◽  
Microwave Absorption ◽  
Magnetic Loss ◽  
Core Shell ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
Electromagnetic Wave Absorption ◽  
X Ray ◽  
Wave Absorption ◽  
Chloride Hexahydrate

The composite microspheres with Ni cores and amorphous TiO2 shells (Ni@TiO2) were synthesized by a one-pot solvothermal method at 180°C for 15 h, which used nickel chloride hexahydrate as Ni source andtetrabutyl orthotitanate as Ti source. The Ni/TiO2 core/shell composites were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX). A possible formation mechanism of core-shell Ni/TiO2 was proposed. Furthermore, the microwave absorption properties of these microspheres were investigated in terms of complex permittivity and permeability. The minimum reflection loss is-29.5 dB at 14.4 GHz for a layer of 4.0 mm thickness. Such phenomenon is attributed to the synergy effect between magnetic loss of Ni core and dielectric loss of amorphous TiO2 shell. The enhanced microwave absorption properties are also believed to be due to the unique coreshell structure. All results indicate that these Ni@TiO2 microspheres may be attractive candidate materials for electromagnetic wave absorption applications.

Coprecipitation Synthesis of Fe-doped ZnO Powders with Enhanced Microwave Absorption Properties

NANO ◽  
2016 ◽  
Vol 11 (12) ◽  
pp. 1650136 ◽  
Author(s):  
Ruiwen Shu ◽  
Xin Wang ◽  
Yingying Yang ◽  
Xiayu Tang ◽  
Xian Zhou ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Crystal Lattice ◽  
Microwave Absorption ◽  
Reflection Loss ◽  
Ferromagnetic Behavior ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
X Ray ◽  
Zno Powders ◽  
Doped Zno

In this work, the Fe-doped ZnO powders have been synthesized by a facile chemical coprecipitation method. The structure, morphology and magnetic properties of the as-prepared powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM). The results showed that the Fe ions were well incorporated into the crystal lattice of ZnO and had a valence state of [Formula: see text]. The magnetization curves indicated the Fe-doped ZnO presented the ferromagnetic behavior at room temperature. Moreover, the electromagnetic (EM) parameters and microwave absorption properties of Fe-doped ZnO/paraffin wax in the frequency range of 2–18[Formula: see text]GHz were explored. The minimum reflection loss reached [Formula: see text] dB at 6.6 GHz, and the reflection loss less than [Formula: see text] dB was 4.0 GHz (from 11.0[Formula: see text]GHz to 15.0[Formula: see text]GHz) with a thickness of only 2.5 mm. Significantly, the enhanced microwave absorption of the as-prepared powders could be achieved by doping with Fe[Formula: see text] ions or varying the thickness of the absorbers. The mechanism of microwave absorption were attributed to the good impedance matching, the dielectric loss resulted from the crystal lattice defects and the magnetic loss originated from the natural resonance. It is believed that the Fe-doped ZnO powders could be used as potential microwave absorbers.

scholarly journals Synthesis and Microwave Absorption Properties of Sulfur-Free Expanded Graphite/Fe3O4 Composites

Molecules ◽  
2020 ◽  
Vol 25 (13) ◽  
pp. 3044
Author(s):  
Jian Sun ◽  
Lijie Li ◽  
Rui Yu ◽  
Xianlong Ma ◽  
Shaohua Jin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Microwave Absorption ◽  
Large Scale ◽  
Expanded Graphite ◽  
Raw Material ◽  
Precipitation Method ◽  
Absorption Properties ◽  
One Pot ◽  
Microwave Absorption Properties ◽  
X Ray

In this study, sulfur-free expanded graphite (EG) was obtained by using flake graphite as the raw material, and EG/Fe3O4 composites with excellent microwave absorption properties were prepared by a facile one-pot co-precipitation method. The structure and properties of as-prepared EG/Fe3O4 were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Raman, X-ray photoelectron spectrometry (XPS), thermogravimetric (TG), and vibrating sample magnetometry (VSM) characterizations. The Fe3O4 intercalated between the layers of expanded graphite forms a sandwich-like structure which is superparamagnetic and porous. When applied as a microwave absorber, the reflection loss (RL) of EG/Fe3O4 reaches −40.39 dB with a thickness of 3.0 mm (10 wt% loading), and the effective absorption bandwidth (EAB < −10 dB) with RL exceeding −10 dB is 4.76–17.66 GHz with the absorber thickness of 1.5–4.0 mm. Considering its non-toxicity, easy operation, low cost, suitability for large-scale industrial production, and excellent microwave absorbing performance, EG/Fe3O4 is expected to be a promising candidate for industrialized electromagnetic absorbing materials.

Sign in / Sign up

Export Citation Format

Share Document