scholarly journals Designing Dual-Effect Nanohybrids for Removing Heavy Metals and Different Kinds of Anions from the Natural Water

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2524
Author(s):  
Osama Saber ◽  
Sarah Mousa Asiri ◽  
Mohamed Farouk Ezzeldin ◽  
Waleed I. M. El-Azab ◽  
Mohammed Abu-Abdeen
Keyword(s):  
Heavy Metals ◽  
Natural Water ◽  
Tap Water ◽  
Thermal Analyses ◽  
Three Dimensional ◽  
Nitrogen Adsorption ◽  
Building Blocks ◽  
Parameters Optimization ◽  
Dual Function ◽  
Cadmium And Lead

In the present study, well-designed nanohybrids are used to act as effective dual-function adsorbents for removing both anions and heavy metals from natural water, at the same time. In this trend, Zn-Al LDHs and graphene oxide are applied to build up building blocks to produce a series of nanohybrids. These nanohybrids were characterized by X-ray diffraction, thermal analyses, Fourier transform infrared spectroscopy, Raman spectroscopy, and scanning and transmission electron microscopy. These techniques confirmed that the prepared nanohybrids contained nanolayered structures with three–dimensional porous systems. These porous systems were identified by the nitrogen adsorption-desorption isotherms and water purification experiments. The obtained results indicated that these nanohybrids included suitable structures to act as dual function materials. The first function was achieved by removing more than 80% of both cadmium and lead from the natural water. The second function was accomplished by eliminating of 100% of hydrogen phosphate and bromide anions alongside with 80%–91% of sulfate, chloride, and fluoride anions. To conclude, these well-designed nanohybrids convert two-dimensional nanolayered structures to three-dimensional porous networks to work as dual-function materials for removing of heavy metals and different kinds of anions naturally found in the fresh tap water sample with no parameters optimization.

Effect of Wastewater on the Soil and Irrigation Process: A Laboratory Study

2017 ◽  
Vol 1 (1) ◽  
pp. 46-55 ◽  
Author(s):  
Athar Hussain ◽  
Manjeeta Priyadarshi ◽  
Saif Said ◽  
Suraj Negi
Keyword(s):  
Heavy Metals ◽  
Tap Water ◽  
Sewage Treatment ◽  
Daily Intake ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Treated Wastewater ◽  
Surface Water Resources ◽  
Industrial Sewage ◽  
Concentration Levels

Most of the industrial sewage effluents used for irrigation contains heavy metals which cause toxicity to crop plants as the soils are able to accumulate heavy metal for many years. The vegetables grown for the present study were irrigated with treated wastewater brought from a nearby full-scale sewage treatment plant at different compositions along with tap water as a control. The concentration levels of the Cd, Co, Cu, Mn and Zn in the soil were found to below the toxic limits as prescribed in literature. Daily Intake Metals (DIM) values suggest that the consumption of plants grown in treated wastewater and tap water is nearly free of risks, as the dietary intake limits of Cu, Fe, Zn and Mn. The Enrichment Factor for the treated wastewater irrigated soil was found in order Zn> Ni> Pb> Cr> Cu> Co> Mn> Cd. Thus, treated wastewater can be effectively used for irrigation. This will have twofold significant environmental advantages: (1) helpful to reduce the groundwater usage for irrigation and (2) helpful to reduce the stress on surface water resources.

scholarly journals Lath Martensite Microstructure Modeling: A High-Resolution Crystal Plasticity Simulation Study

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 691
Author(s):  
Francisco-José Gallardo-Basile ◽  
Yannick Naunheim ◽  
Franz Roters ◽  
Martin Diehl
Keyword(s):  
High Resolution ◽  
Mechanical Behavior ◽  
Crystal Plasticity ◽  
Lath Martensite ◽  
Three Dimensional ◽  
Building Blocks ◽  
Quantitative Agreement ◽  
Carbon Steels ◽  
Plastic Behavior ◽  
Austenitic Phase

Lath martensite is a complex hierarchical compound structure that forms during rapid cooling of carbon steels from the austenitic phase. At the smallest, i.e., ‘single crystal’ scale, individual, elongated domains, form the elemental microstructural building blocks: the name-giving laths. Several laths of nearly identical crystallographic orientation are grouped together to blocks, in which–depending on the exact material characteristics–clearly distinguishable subblocks might be observed. Several blocks with the same habit plane together form a packet of which typically three to four together finally make up the former parent austenitic grain. Here, a fully parametrized approach is presented which converts an austenitic polycrystal representation into martensitic microstructures incorporating all these details. Two-dimensional (2D) and three-dimensional (3D) Representative Volume Elements (RVEs) are generated based on prior austenite microstructure reconstructed from a 2D experimental martensitic microstructure. The RVEs are used for high-resolution crystal plasticity simulations with a fast spectral method-based solver and a phenomenological constitutive description. The comparison of the results obtained from the 2D experimental microstructure and the 2D RVEs reveals a high quantitative agreement. The stress and strain distributions and their characteristics change significantly if 3D microstructures are used. Further simulations are conducted to systematically investigate the influence of microstructural parameters, such as lath aspect ratio, lath volume, subblock thickness, orientation scatter, and prior austenitic grain shape on the global and local mechanical behavior. These microstructural features happen to change the local mechanical behavior, whereas the average stress–strain response is not significantly altered. Correlations between the microstructure and the plastic behavior are established.

scholarly journals Concentration of cadmium and lead in vegetables and fruits

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Monika Rusin ◽  
Joanna Domagalska ◽  
Danuta Rogala ◽  
Mehdi Razzaghi ◽  
Iwona Szymala
Keyword(s):  
Heavy Metals ◽  
Fruits And Vegetables ◽  
Significant Risk ◽  
Absorption Spectrometry ◽  
Food Groups ◽  
Chemical Contamination ◽  
Fresh Frozen ◽  
Processed Products ◽  
Cadmium And Lead ◽  
Vegetables And Fruits

AbstractChemical contamination of foods pose a significant risk to consumers. A source of this risk is due to the consumption of products contaminated with heavy metals such as cadmium (Cd) and lead (Pb). The aim of the study was to research the levels of Cd and Pb contamination of selected species of vegetables and fruits in the form of fresh, frozen, dried and processed products. The goal was to verify which of these food groups was more contaminated with heavy metals. The study covered 370 samples of fruits and vegetables including apples, pears, grapes, raspberries, strawberries, cranberries, as well as beetroots, celeries, carrots and tomatoes. The content of Cd and Pb was determined by atomic absorption spectrometry. Quantitative results were analyzed using statistical models: analysis of variance, outlier analysis, post-hoc multiple comparison Tukey test. The tests showed that the levels of Cd and Pb concentration in samples of fresh, processed, frozen and dried fruits and vegetables varied substantially. The highest concentrations were recorded in dried products. Several fruit and vegetable samples exceeded the maximum permissible concentrations of Cd and Pb. The contamination of these products could be a significant source of consumer exposure to heavy metals when these products are a part of the diet.

Foundations of Advanced Neuroanatomy: Technical Guidelines for Specimen Preparation, Dissection, and 3D-Photodocumentation in a Surgical Anatomy Laboratory

2019 ◽  
Author(s):  
Luciano César PC Leonel ◽  
Lucas P. Carlstrom ◽  
Christopher S. Graffeo ◽  
Avital Perry ◽  
Carlos Diogenes Pinheiro-Neto ◽  
...  
Keyword(s):  
Oral Tradition ◽  
Dynamic Range ◽  
Tap Water ◽  
Three Dimensional ◽  
High Dynamic Range ◽  
Surgical Anatomy ◽  
Lessons Learned ◽  
Specimen Preparation ◽  
Technological Advances ◽  
Key Steps

Abstract Objective This study was aimed to provide a key update to the seminal works of Prof. Albert L. Rhoton Jr., MD, with particular attention to previously unpublished insights from the oral tradition of his fellows, recent technological advances including endoscopy, and high-dynamic range (HDR) photodocumentation, and, local improvements in technique, we have developed to optimize efficient neuroanatomic study. Methods Two formaldehyde-fixed cadaveric heads were injected with colored latex to demonstrate step-by-step specimen preparation for microscopic or endoscopic dissection. One formaldehyde-fixed brain was utilized to demonstrate optimal three-dimensional (3D) photodocumentation techniques. Results Key steps of specimen preparation include vessel cannulation and securing, serial tap water flushing, specimen drainage, vessel injection with optimized and color-augmented latex material, and storage in 70% ethanol. Optimizations for photodocumentation included the incorporation of dry black drop cloth and covering materials, an imaging-oriented approach to specimen positioning and illumination, and single-camera stereoscopic capture techniques, emphasizing the three-exposure-times-per-eye approach to generating images for HDR postprocessing. Recommended tools, materials, and technical nuances were emphasized throughout. Relative advantages and limitations of major 3D projection systems were comparatively assessed, with sensitivity to audience size and purpose specific recommendations. Conclusion We describe the first consolidated step-by-step approach to advanced neuroanatomy, including specimen preparation, dissection, and 3D photodocumentation, supplemented by previously unpublished insights from the Rhoton fellowship experience and lessons learned in our laboratories in the past years such that Prof. Rhoton's model can be realized, reproduced, and expanded upon in surgical neuroanatomy laboratories worldwide.

Design and Optimization of a Shape Memory Alloy-Based Self-Folding Sheet

2013 ◽  
Vol 135 (11) ◽  
Author(s):  
Edwin Peraza-Hernandez ◽  
Darren Hartl ◽  
Edgar Galvan ◽  
Richard Malak
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Three Dimensional ◽  
Building Blocks ◽  
Passive Layer ◽  
Von Mises Stress ◽  
Maximum Temperature ◽  
Radius Of Curvature ◽  
Folding Angle ◽  
The Impact

Origami engineering—the practice of creating useful three-dimensional structures through folding and fold-like operations on two-dimensional building-blocks—has the potential to impact several areas of design and manufacturing. In this article, we study a new concept for a self-folding system. It consists of an active, self-morphing laminate that includes two meshes of thermally-actuated shape memory alloy (SMA) wire separated by a compliant passive layer. The goal of this article is to analyze the folding behavior and examine key engineering tradeoffs associated with the proposed system. We consider the impact of several design variables including mesh wire thickness, mesh wire spacing, thickness of the insulating elastomer layer, and heating power. Response parameters of interest include effective folding angle, maximum von Mises stress in the SMA, maximum temperature in the SMA, maximum temperature in the elastomer, and radius of curvature at the fold line. We identify an optimized physical realization for maximizing folding capability under mechanical and thermal failure constraints. Furthermore, we conclude that the proposed self-folding system is capable of achieving folds of significant magnitude (as measured by the effective folding angle) as required to create useful 3D structures.

A new three-dimensional anionic cadmium(II) dicyanamide network

2014 ◽  
Vol 70 (11) ◽  
pp. 1054-1056 ◽  
Author(s):  
Qiang Li ◽  
Hui-Ting Wang
Keyword(s):  
Crystal Structure ◽  
Aqueous Solution ◽  
Unit Cell Volume ◽  
Three Dimensional ◽  
Building Blocks ◽  
The Other ◽  
Dimensional Structure ◽  
Cadmium Nitrate ◽  
Nitrate Tetrahydrate ◽  
Anionic Framework

A new cadmium dicyanamide complex, poly[tetramethylphosphonium [μ-chlorido-di-μ-dicyanamido-κ4N1:N5-cadmium(II)]], [(CH3)4P][Cd(NCNCN)2Cl], was synthesized by the reaction of tetramethylphosphonium chloride, cadmium nitrate tetrahydrate and sodium dicyanamide in aqueous solution. In the crystal structure, each CdIIatom is octahedrally coordinated by four terminal N atoms from four anionic dicyanamide (dca) ligands and by two chloride ligands. The dicyanamide ligands play two different roles in the building up of the structure; one role results in the formation of [Cd(dca)Cl]2building blocks, while the other links the building blocks into a three-dimensional structure. The anionic framework exhibits a solvent-accessible void of 673.8 Å3, amounting to 47.44% of the total unit-cell volume. The cavities in the network are occupied by pairs of tetramethylphosphonium cations.

scholarly journals Assembly of multicomponent structures from hundreds of micron-scale building blocks using optical tweezers

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Jeffrey E. Melzer ◽  
Euan McLeod
Keyword(s):  
Optical Tweezers ◽  
Three Dimensional ◽  
Building Blocks ◽  
Optical Tweezer ◽  
Device Fabrication ◽  
Positional Accuracy ◽  
Component Structure ◽  
Material Development ◽  
Critical Process Parameters ◽  
Optical Positioning

AbstractThe fabrication of three-dimensional (3D) microscale structures is critical for many applications, including strong and lightweight material development, medical device fabrication, microrobotics, and photonic applications. While 3D microfabrication has seen progress over the past decades, complex multicomponent integration with small or hierarchical feature sizes is still a challenge. In this study, an optical positioning and linking (OPAL) platform based on optical tweezers is used to precisely fabricate 3D microstructures from two types of micron-scale building blocks linked by biochemical interactions. A computer-controlled interface with rapid on-the-fly automated recalibration routines maintains accuracy even after placing many building blocks. OPAL achieves a 60-nm positional accuracy by optimizing the molecular functionalization and laser power. A two-component structure consisting of 448 1-µm building blocks is assembled, representing the largest number of building blocks used to date in 3D optical tweezer microassembly. Although optical tweezers have previously been used for microfabrication, those results were generally restricted to single-material structures composed of a relatively small number of larger-sized building blocks, with little discussion of critical process parameters. It is anticipated that OPAL will enable the assembly, augmentation, and repair of microstructures composed of specialty micro/nanomaterial building blocks to be used in new photonic, microfluidic, and biomedical devices.

Construction of Three-Dimensional DNA Hydrogels from Linear Building Blocks

2014 ◽  
Vol 126 (32) ◽  
pp. 8468-8472 ◽  
Author(s):  
Tanja Nöll ◽  
Holger Schönherr ◽  
Daniel Wesner ◽  
Michael Schopferer ◽  
Thomas Paululat ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Building Blocks ◽  
Dna Hydrogels

A New POM-Based Supramolecular Compound: Synthesis, Structure and Adsorptive Property of [Cu(phen)2]3[W6O19]

2014 ◽  
Vol 919-921 ◽  
pp. 2013-2016 ◽  
Author(s):  
Ya Bing Liu ◽  
Hong Jie Wang ◽  
Hong Kai Zhao
Keyword(s):  
Three Dimensional ◽  
Building Blocks ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
Hybrid Compound ◽  
Adsorptive Property ◽  
X Ray ◽  
Hydrogen Bonding Interactions ◽  
Compound Synthesis ◽  
Metal Organic

A POM - based organice - inorganic hybrid compound with the chemical formula of[Cu (phen)2]3[W6O19] (phen = 1,10-phenanthroline) (1) has been hydrothermally synthesized andstructurally characterized by the elemental analysis, and single crystal X-ray diffraction. Compound 1 crystallizes in the monoclinic space groupC2/c witha=18.319(4) Å,b= 17.311(4) Å,c= 22.248(4) Å,β= 112.40(3) o,V= 6523(2) Å3,Z= 4, R1= 0.0448, andwR2=0.1218. Compound 1 consists of the [W6O19]3-building blocks and [Cu (phen)2]+metal organic cationic moieties, which are packed together via the extensive hydrogen-bonding interactions to form a three-dimensional supramolecular framework. The adsorption of methylene blue (MB) under UV irradiation with 1 as the heterogeneous adsorbent has been investigated, showing a good adsorptive property of 1 for MB degradation.

Sign in / Sign up

Export Citation Format

Share Document