scholarly journals Recent Progress in Cathode Materials for Sodium-Metal Halide Batteries

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3260
Author(s):  
Xiaowen Zhan ◽  
Minyuan M. Li ◽  
J. Mark Weller ◽  
Vincent L. Sprenkle ◽  
Guosheng Li
Keyword(s):  
Energy Storage ◽  
Fossil Fuels ◽  
Low Cost ◽  
Renewable Energy Sources ◽  
Metal Halide ◽  
Level Energy ◽  
Power Sources ◽  
Sodium Metal ◽  
Renewable Power ◽  
Grid Level

Transitioning from fossil fuels to renewable energy sources is a critical goal to address greenhouse gas emissions and climate change. Major improvements have made wind and solar power increasingly cost-competitive with fossil fuels. However, the inherent intermittency of renewable power sources motivates pairing these resources with energy storage. Electrochemical energy storage in batteries is widely used in many fields and increasingly for grid-level storage, but current battery technologies still fall short of performance, safety, and cost. This review focuses on sodium metal halide (Na-MH) batteries, such as the well-known Na-NiCl2 battery, as a promising solution to safe and economical grid-level energy storage. Important features of conventional Na-MH batteries are discussed, and recent literature on the development of intermediate-temperature, low-cost cathodes for Na-MH batteries is highlighted. By employing lower cost metal halides (e.g., FeCl2, and ZnCl2, etc.) in the cathode and operating at lower temperatures (e.g., 190 °C vs. 280 °C), new Na-MH batteries have the potential to offer comparable performance at much lower overall costs, providing an exciting alternative technology to enable widespread adoption of renewables-plus-storage for the grid.

scholarly journals Towards a Greener and Scalable Synthesis of Na 2 Ti 6 O 13 Nanorods and Their Application as Anodes in Batteries for Grid‐Level Energy Storage

2021 ◽  
Vol 9 (1) ◽  
pp. 2170011
Author(s):  
Dario M. De Carolis ◽  
Dragoljub Vrankovic ◽  
Samira A. Kiefer ◽  
Enrico Bruder ◽  
Michael Thomas Dürrschnabel ◽  
...  
Keyword(s):  
Energy Storage ◽  
Level Energy ◽  
Scalable Synthesis ◽  
Grid Level

scholarly journals Advances in Underground Energy Storage for Renewable Energy Sources

2021 ◽  
Vol 11 (11) ◽  
pp. 5142
Author(s):  
Javier Menéndez ◽  
Jorge Loredo
Keyword(s):  
European Union ◽  
Renewable Energy ◽  
Energy Storage ◽  
Natural Gas ◽  
Greenhouse Gas ◽  
Fossil Fuels ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
The European Union ◽  
Coal Fuel

The use of fossil fuels (coal, fuel, and natural gas) to generate electricity has been reduced in the European Union during the last few years, involving a significant decrease in greenhouse gas emissions [...]

Overview on the Liquid Metal Battery for Grid-Level Large-Scale Energy Storage

2016 ◽  
Vol 723 ◽  
pp. 572-578
Author(s):  
Li Fu ◽  
Qi Chi Le ◽  
Xi Bo Wang ◽  
Xuan Liu ◽  
Wei Tao Jia
Keyword(s):  
Energy Storage ◽  
Liquid Metal ◽  
Large Scale ◽  
Low Cost ◽  
Advantages And Disadvantages ◽  
Comprehensive Comparison ◽  
Development And Utilization ◽  
Working Principle ◽  
Liquid Metal Battery ◽  
Grid Level

In recent years, the development and utilization of renewable generation have attracted more and more attention, and the grid puts forward higher requirements to the energy storage technology, especially for security, stability and reliability. The liquid metal battery (LMB) consists of two liquid metal electrodes and a molten salt electrolyte, which will be segregated into three liquid layers naturally. Being low-cost and long-life, it is regarded as the best choice for grid-level large-scale energy storage. This paper describes the main structure and working principle of the LMB, analyzes the advantages and disadvantages of the LMB when compared with the traditional batteries, and explores the feasibility and economy when it is used as a kind of large-scale energy storage applied in the power grid. The paper also makes a comprehensive comparison on the performance of several LMBs, and points out the LMB’s research and development in the future.

scholarly journals Pretreatments of lignocellulosic feedstock for bioethanol production

2010 ◽  
Vol 64 (4) ◽  
pp. 283-293 ◽  
Author(s):  
Zlatica Predojevic
Keyword(s):  
Renewable Energy ◽  
Co2 Emission ◽  
Fossil Fuels ◽  
Low Cost ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Bioethanol Production ◽  
Environment Protection ◽  
Lignocellulosic Feedstock ◽  
Lignocellulosic Feedstocks

The use of renewable energy sources (biofuels), either as a component in the conventional fossil fuels, gasoline and diesel, or as a pure biofuel, contributes to energy saving and decrease of total CO2 emission. The use of bioethanol mixed with gasoline significantly decreases gasoline consumption and contributes to environment protection. One of the problems in the production of bioethanol is the availability of sugar and starch based feedstock used for its production. However, lignocellulosic feedstocks are becoming more significant in the production of bioethanol due to their availability and low cost. The aim of this study is to point out the advantages and shortcomings of pretreatment processes and hydrolyses of lignocellulosic feedstocks that precede their fermentation to bioethanol.

scholarly journals Experimental Studies on an Inclined Collector Divergent Chimney Pilot Plant

2021 ◽  
Vol 850 (1) ◽  
pp. 012008
Author(s):  
N Rajamurugu
Keyword(s):  
Renewable Energy ◽  
Fossil Fuels ◽  
Low Cost ◽  
Renewable Energy Sources ◽  
Experimental Studies ◽  
High Mass ◽  
Energy Sources ◽  
Solar Pv ◽  
Solar Chimney ◽  
Energy Agency

Abstract Renewable energy sources become suitable valid options to reduce the dependency on fossil fuels or petroleum products. The International Renewable Energy Agency reports that the world will harvest 40% of energy from renewable energy sources by 2030. Conventional technologies such as solar PV technology, consumes higher capital per unit (kWh) of electricity generation cost significantly higher than the traditional sources. Hence, solar chimney power generation system can be suitable option for generating low cost energy. Solar chimneys are developed and tested by different researchers in enhancing the performance of the system. Studies on the geometric modifications of the collector, and chimney are limited. The aim of this paper is to analyse the experimental data obtained from a divergent solar chimney. Experimentation is carried under sunlight in an open atmosphere. The airflow rates in the chimneys are tested under different collector outlet height. The experimental results showed that a chimney with higher collector openings was performed well than other models. The computational analysis is also carried out using ANSYS Fluent software package which shows that the collector opening of 2.5m is recommended for higher high mass flow rate and system efficiency.

scholarly journals Design Considerations for the Liquid Air Energy Storage System Integrated to Nuclear Steam Cycle

2021 ◽  
Vol 11 (18) ◽  
pp. 8484
Author(s):  
Seok-Ho Song ◽  
Jin-Young Heo ◽  
Jeong-Ik Lee
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Power Sources

A nuclear power plant is one of the power sources that shares a large portion of base-load. However, as the proportion of renewable energy increases, nuclear power plants will be required to generate power more flexibly due to the intermittency of the renewable energy sources. This paper reviews a layout thermally integrating the liquid air energy storage system with a nuclear power plant. To evaluate the performance realistically while optimizing the layout, operating nuclear power plant conditions are used. After revisiting the analysis, the optimized performance of the proposed system is predicted to achieve 59.96% of the round-trip efficiency. However, it is further shown that external environmental conditions could deteriorate the performance. For the design of liquid air energy storage-nuclear power plant integrated systems, both the steam properties of the linked plants and external factors should be considered.

scholarly journals Long Term Impact of Grid Level Energy Storage on Renewable Energy Penetration and Emissions in the Chilean Electric System

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1070 ◽  
Author(s):  
Serguey Maximov ◽  
Gareth Harrison ◽  
Daniel Friedrich
Keyword(s):  
Energy Storage ◽  
Large Scale ◽  
Level Energy ◽  
Renewable Generation ◽  
Low Carbon ◽  
Solar Pv ◽  
Electricity System ◽  
Long Term Impact ◽  
Grid Level

Chile has abundant solar and wind resources and renewable generation is becoming competitive with fossil fuel generation. However, due to renewable resource variability their large-scale integration into the electricity grid is not trivial. This study evaluates the long-term impact of grid level energy storage, specifically Pumped Thermal Energy Storage (PTES), on the penetration of solar and wind energies and on CO2 emissions reduction in Chile. A cost based linear optimization model of the Chilean electricity system is developed and used to analyse and optimize different renewable generation, transmission and energy storage scenarios until 2050. For the base scenario of decommissioning ageing coal plants and no new coal and large hydro generation, the generation gap is filled by solar photovoltaic (PV), concentrated solar power (CSP) and flexible gas generation with the associated drop of 78% in the CO2 emission factor. The integration of on-grid 8h capacity storage increases the solar PV fraction which leads to a 6% reduction in operation and investment costs by 2050. However, this does not necessarily lead to further reductions in the long term emissions. Thus, it is crucial to consider all aspects of the energy system when planning the transition to a low carbon electricity system.

Cellulose Nanocrystals Assisted Preparation of Electrochemical Energy Storage Electrodes

2017 ◽  
Author(s):  
Danny Illera ◽  
Victor Fontalvo ◽  
Humberto Gomez
Keyword(s):  
Energy Storage ◽  
Electrochemical Performance ◽  
Surface Area ◽  
Cellulose Nanocrystals ◽  
Low Cost ◽  
Renewable Energy Sources ◽  
Film Deposition ◽  
One Step ◽  
Film Synthesis ◽  
Storage Technologies

Renewable energy sources demands sustainable energy storage technologies through the incorporation of low-cost and environment-friendly materials. In this regard, cellulose nanocrystals (CN), which are needle-shaped nanostructure derived from cellulose-rich resources, are extracted by sulfuric acid hydrolysis of biomass and used as both template and binder for the construction of electrochemical capacitors electrodes. A composite material is synthetized comprising CN and a conjugated electroactive polymer (CEP) to overcome the electrical insulating properties of cellulose as well as to exploit enhanced electrochemical activity by increased electrode surface-area. A one-step in-situ film synthesis protocol is evaluated by performing simultaneous polymerization and film deposition. The effect of proportion of starting components are evaluated through statistical Response Surface Methodology towards optimizing the electrochemical performance. Depending on the mass proportion of the starting components, a conducting network could be created by surface coating of the CEP on the whiskers during polymerization. Electrochemical measurements suggest an increase in specific surface area by at least a factor of two relative to bare CEP as a consequence of the template role of cellulose. Therefore, adjustment of the proposed one-step synthesis parameters allows tuning the material properties to meet specific application requirements regarding electrochemical performance.

scholarly journals Aqueous intercalation-type electrode materials for grid-level energy storage: Beyond the limits of lithium and sodium

Nano Energy ◽  
2018 ◽  
Vol 50 ◽  
pp. 229-244 ◽  
Author(s):  
Zhenyu Xing ◽  
Shun Wang ◽  
Aiping Yu ◽  
Zhongwei Chen
Keyword(s):  
Energy Storage ◽  
Electrode Materials ◽  
Level Energy ◽  
Grid Level

scholarly journals Energy Storage System in Smart Homes of Smart City

2019 ◽  
Vol 8 (11) ◽  
pp. 948-954
Keyword(s):  
Energy Storage ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Living Standard ◽  
Storage Device ◽  
Solar Pv ◽  
Renewable Power ◽  
Economical Consideration ◽  
Proper Energy

The Nanogrid utilizes renewable energy sources, e.g. Solar PV, Wind, etc; which are stochastic in nature. Due to this nature, power reliability is the main issue. To increase the reliability of the power supply and proper utilization of the available resources, Nanogrid should either connected to the utility grid directly or it must have the proper energy storage system. Energy storage system fills the gap between consumers demand and renewable power generation; which is very important issue in technical and economical consideration. The Nanogrid gives new hope of ray to the people living in off grid areas. By using energy storage system we can increase their living standard and enhance socio-economical development. This paper proposes the selection of the proper energy storage device and its calculation, control strategy also suggested for protecting storage device from over voltage and deep discharge.

Sign in / Sign up

Export Citation Format

Share Document