scholarly journals Finite Model Analysis and Practical Design Equations of Circular Concrete-Filled Steel Tube Columns Subjected to Compression-Torsion Load

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5564
Author(s):  
Yongzhi Gong ◽  
Faxing Ding ◽  
Liping Wang ◽  
Borong Huang ◽  
Yingjie Shan ◽  
...  
Keyword(s):  
Finite Element ◽  
Shear Stress ◽  
Axial Force ◽  
Maximum Shear Stress ◽  
Steel Tube ◽  
Steel Tubes ◽  
Concrete Filled Steel Tube ◽  
Composite Action ◽  
Practical Design ◽  
Cfst Columns

The objective of this study is to investigate the mechanical properties and the composite action of circular concrete-filled steel tube (CFST) columns subjected to compression-torsion load using finite element model analysis. Load–strain (T–γ) curves, normal stress, shear stress, and the composite action between the steel tubes and the interior concrete were analyzed based on the verified 3D finite element models. The results indicate that with the increase of axial force, the maximum shear stress at the core concrete increased significantly, and the maximum shear stress of the steel tubes gradually decreased. Meanwhile, the torsional bearing capacity of the column increased at first and then decreased. The torque share in the columns changed from the tube-sharing domain to the concrete-sharing domain, while the axial force of the steel tube remained unchanged. Practical design equations for the torsional capacity of axially loaded circular CFST columns were proposed based on the parametric analysis. The accuracy and validity of the proposed equations were verified against the collected experimental results.

scholarly journals Effect of Concrete Age and Creep on the Behavior of Concrete-Filled Steel Tube Columns

2016 ◽  
Vol 2016 ◽  
pp. 1-10
Author(s):  
HaiYang Wang ◽  
XiaoXiong Zha ◽  
Wei Feng
Keyword(s):  
Numerical Models ◽  
Axial Loading ◽  
Steel Tube ◽  
Test Results ◽  
Empirical Formulas ◽  
Steel Tubes ◽  
Load Bearing Capacity ◽  
Concrete Filled Steel Tube ◽  
Practical Design ◽  
Cfst Columns

The influence of concrete age and creep on the ultimate axial loading capacity of concrete-filled steel tube (CFST) columns is experimentally and numerically investigated. After validation of numerical models, a parametric study is conducted and the results are used to formulate empirical formulas for predicting the ultimate axial load-bearing capacity of the columns. Formulas are also proposed for predicting both the composite creep and aging coefficients of the CFST columns, which consider the confinement action of steel tubes on concrete. Then, the proposed formulas are validated independently by comparing their predictions with existing test results performed by other researchers. The comparisons show that the empirical formulas have the potential to be used in the practical design of CFST columns.

Axial impact behaviors of stub concrete-filled square steel tubes

2019 ◽  
Vol 22 (11) ◽  
pp. 2490-2503 ◽  
Author(s):  
YT Zhang ◽  
B Shan ◽  
Y Xiao
Keyword(s):  
Finite Element ◽  
Failure Modes ◽  
Steel Tube ◽  
Experimental Results ◽  
Parameter Analysis ◽  
Steel Tubes ◽  
Simple Method ◽  
Concrete Filled Steel Tube ◽  
Drop Weight ◽  
The Impact

Existing research on the widely used concrete-filled steel tubes is mainly focused on static or cyclic loading, and the studies on effects of high strain rate are relatively rare. In this article, seven stub concrete-filled steel tubular columns with square section were tested under both static and impact loads, using a large-capacity drop-weight testing machine. The research parameters were variable height of the drop-weight and different load types. The experimental results show that the failure modes of the concrete-filled steel tube columns from the impact tests are similar with those under static load, characterized by the local buckling of the steel tube. The time history curves of impact force and steel strain were investigated. The results indicate that with increasing impact energy, the concrete-filled steel tube stub columns had a stronger impact-resistant behavior. The dynamic analysis software LS-DYNA was employed to simulate the impact behaviors of the concrete-filled steel tube specimens, and the finite element results were reasonable compared with the test results. The parameter analysis on the impact behavior of concrete-filled steel tube columns was performed using the finite element model as well. A simple method was proposed to calculate the impact strength of square concrete-filled steel tube columns and compared favorably with experimental results.

Finite Element Modelling of Concrete-Filled Steel Tube Reinforced Concrete Stub Columns under Axial Compression

2013 ◽  
Vol 351-352 ◽  
pp. 138-142
Author(s):  
Zhi Bin Wang ◽  
Li Ying Liu
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Steel Tube ◽  
Fe Model ◽  
Mechanism Analysis ◽  
Test Results ◽  
Seismic Behaviour ◽  
Steel Tubes ◽  
Concrete Filled Steel Tube ◽  
Stub Columns

Concrete-filled steel tube reinforced concrete (CFSTRC) columns are currently being studied as a popular method to improve the shear strength, the ductility and the seismic behaviour of reinforced concrete (RC) columns. Owing to the complexity of confinement provided by steel tubes and stirrups, the behaviour of CFSTRC column is difficult to be accurately simulated. Thus,so far there is not a finite element (FE) model for CFSTRC columns. For studying the performance of this composite column, a FE model was developed based on the existing test results and theories. The predicted results using this FE model agree with the test results, which means that this model can be applied to carry out the further mechanism analysis.

Eccentric compression behaviour of rectangular concrete-filled steel tube columns with self-compacting lower expansion concrete

2022 ◽  
pp. 136943322110542
Author(s):  
XiuShu Qu ◽  
Yuxiang Deng ◽  
GuoJun Sun ◽  
Qingwen Liu ◽  
Qi Liu
Keyword(s):  
Finite Element ◽  
Bearing Capacity ◽  
Failure Modes ◽  
Numerical Models ◽  
Experimental Studies ◽  
Steel Tube ◽  
Concrete Filled Steel Tube ◽  
Compression Behaviour ◽  
Eccentric Compression ◽  
Cfst Columns

The use of a self-compacting lower expansion concrete in a concrete-filled steel tube (CFST) structure not only promotes the quality of concrete pouring but also improves the bond behaviour between the steel and the concrete. In combination with the actual stress state of the columns in the engineering structure, it is necessary to study the eccentric compression behaviour of the column. In this study, experimental studies involving both uniaxial and biaxial bending tests of rectangular self-compacting lower expansion CFST columns were carried out. The variation laws of the load–displacement curves, the lateral deflection curves and the stress–strain curves during the loading phase were analysed. Furthermore, the failure modes and the mechanical properties of the specimens under eccentric compression loads were investigated. Subsequently, the numerical models of CFST columns with self-compacting lower expansion concrete were considered and established. In order to verify the rationality of the finite element modelling, the numerical calculation results were compared with test results. Then, a parametric analysis of the compression and the bending bearing capacities of each column was carried out by changing the eccentricity of the load, and the N–M curves or N-Mx-My surfaces describing the ultimate bearing capacity of the column were obtained. Finally, by the parametric finite element analysis of the rectangular CFST columns regarding to the bearing capacity under the same eccentricity, a conclusion was obtained: when the expansion agent content γ of a specimen increased from 0% to 10%, the bearing capacity of the columns increases significantly, but when continue increasing the expansive agent content, the expansion agent content has little effect on the compression–bending bearing capacity.

The Study on Static Force Behavior of Concrete Filled Steel Tube Lattice Wind Generator Tower Joints

2013 ◽  
Vol 671-674 ◽  
pp. 833-837
Author(s):  
Yang Wen ◽  
Fei Zhou
Keyword(s):  
Tube Wall ◽  
Local Buckling ◽  
Steel Tube ◽  
Wall Region ◽  
Steel Tubes ◽  
Concrete Filled Steel Tube ◽  
Wind Generator ◽  
Nonlinear Static ◽  
Angle Steel ◽  
Section Form

In order to discuss the failure mechanism of concrete filled steel tube lattice wind generator tower joints. Based on the parameters of web member section form, and using nonlinear static numerical simulation, this dissertation research on the stressed complex joints. The results of the study show that the abdominal rod for circular steel tubes joint (JD1) is instability failure which is led to the local buckling of compressive bar; the abdominal rod for single angle steel (JD2) or double angle steel (JD3) joint is instability failure because of the local buckling of the joint board. Under the web members and joint boards all fitting their own capacity requirements, JD1 is very easy to make draw bar broken on both sides of the pillar tube wall region, JD2 and JD3 are apt to damage on the weak positions of joint board ends and pillar tube wall joint. In the three forms of web member joints, the best ultimate bearing capacity is JD1 , JD3 is the second and JD2 is minimum.

Three Types of Stress-Strain Relationship’s Comparison of Circular Tubed Reinforced Concrete in FEA

2012 ◽  
Vol 204-208 ◽  
pp. 930-933
Author(s):  
Xiao Hu ◽  
Zhen Lin Chen
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Uniaxial Stress ◽  
Steel Tube ◽  
Finite Element Analyses ◽  
Stress Strain ◽  
Concrete Filled Steel Tube ◽  
Bearing Analysis

The paper introduces 3 types of uniaxial stress-strain relationships of concrete filled steel tube by Pan Youguang, Susantha and Saenz, and performs finite element analyses of the axial strengths of 18 CTRC columns, studies the characters of three models, and comprises between the axial strengths from FEA and existed experiments. Results show these 3 types of model are all suitable for bearing analysis, but Pan’s model is more accurate.

scholarly journals Artificial Neural Network-Based Method for Seismic Analysis of Concrete-Filled Steel Tube Arch Bridges

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Zhen Liu ◽  
Shibo Zhang
Keyword(s):  
Neural Network ◽  
Finite Element Method ◽  
Artificial Neural Network ◽  
Finite Element ◽  
Seismic Analysis ◽  
Steel Tube ◽  
Arch Bridge ◽  
Concrete Filled Steel Tube ◽  
Cfst Arch Bridge ◽  
Artificial Neural

Seismic analysis of concrete-filled steel tube (CFST) arch bridge based on finite element method is a time-consuming work. Especially when uncertainty of material and structural parameters are involved, the computational requirements may exceed the computational power of high performance computers. In this paper, a seismic analysis method of CFST arch bridge based on artificial neural network is presented. The ANN is trained by these seismic damage and corresponding sample parameters based on finite element analysis. In order to obtain more efficient training samples, a uniform design method is used to select sample parameters. By comparing the damage probabilities under different seismic intensities, it is found that the damage probabilities of the neural network method and the finite element method are basically the same. The method based on ANN can save a lot of computing time.

scholarly journals Research on Compression Behavior of Square Thin-Walled CFST Columns with Steel-Bar Stiffeners

2018 ◽  
Vol 8 (9) ◽  
pp. 1602 ◽  
Author(s):  
Zhao Yang ◽  
Chengxiang Xu
Keyword(s):  
Bearing Capacity ◽  
Local Buckling ◽  
Steel Tube ◽  
Steel Tubes ◽  
Compression Behavior ◽  
Steel Bar ◽  
Steel Bars ◽  
Thin Walled ◽  
Structural Measure ◽  
Cfst Columns

Local buckling in steel tubes was observed to be capable of reducing the ultimate loads of thin-walled concrete-filled steel-tube (CFST) columns under axial compression. To strengthen the steel tubes, steel bars were proposed in this paper to be used as stiffeners fixed onto the tubes. Static-loading tests were conducted to study the compression behavior of square thin-walled CFST columns with steel bar stiffeners placed inside or outside the tube. The effect and feasibility of steel bar stiffeners were studied through the analysis of failure mode, load–displacement relationship, ultimate load, ductility, and local buckling. Different setting methods of steel bars were compared as well. The results showed that steel-bar stiffeners proposed in this paper can be effective in delaying local buckling as well as increasing the bearing capacity of the columns, but will decrease the ductility of the columns. In order to obtain a higher bearing capacity of columns, steel bars with low stiffness should be placed inside and steel bars with high stiffness should be placed outside of the steel tubes. The study is helpful in providing reference to the popularization and application of this new structural measure to avoid or delay the local buckling of thin-walled CFST columns.

Sign in / Sign up

Export Citation Format

Share Document