An Attempt to Track Two Grades of Road Bitumen from Different Plants Using Fourier Transform Infrared Spectroscopy

This study aimed to evaluate the possibility of using Fourier Transform Infrared (FTIR) spectroscopy to track binders produced by three different plants: plants A, B, and C. The work included the quality assessment of 80 bituminous materials graded as BND 70/100 and 100/130 according to GOST 33133 (Russian interstate standard) and chemical analyses using FTIR spectroscopy. FTIR analyses were conducted before and after short-term ageing in a Rolling Thin Film Oven Test (RTFOT). Thus, the number of binder samples was multiplied by two (2) for a final total of 160 infrared (IR) spectra. All infrared spectra were normalised to ensure the reliability of results, and the standard deviation and variance coefficient were included. The principal purpose of the present work was to track the origin and the ageing extent of the bituminous binders under study.

Download Full-text

Vibrational biospectroscopic study and chemical structure analysis of unsaturated polyamides nanoparticles as anti–cancer polymeric nanomedicines using synchrotron radiation

International Journal of Advanced Chemistry ◽

10.14419/ijac.v6i2.12528 ◽

2018 ◽

Vol 6 (2) ◽

pp. 167 ◽

Cited By ~ 1

Author(s):

Alireza Heidari

Keyword(s):

Fourier Transform ◽

Synchrotron Radiation ◽

Ftir Spectroscopy ◽

Chemical Structure ◽

Fourier Transform Infrared ◽

Considerable Change ◽

Total Reflection ◽

Attenuated Total Reflection ◽

Anti Cancer ◽

Before And After

Firstly, unsaturated polyamides nanoparticles were hardened by continuous synchrotron radiation and then, the induced changes in its chemical structure were studied by Attenuated Total Reflection–Fourier Transform Infrared (ATR–FTIR) spectroscopy. It was shown that applying synchrotron radiation for hardening not only leads to reduction of hardening time but also creates cross link in polymer by breaking Carbon–Carbon double bond, without any considerable change in its chemical structure. In addition, an unsaturated polyamide nanoparticle as anti–cancer polymeric nanomedicines is hardened by synchrotron radiation. Its chemical structure before and after hardening is studied using Raman and Attenuated Total Reflection–Fourier Transform Infrared (ATR–FTIR) spectroscopy. The results show that Raman spectroscopy is considerably better than Attenuated Total Reflection–Fourier Transform Infrared (ATR–FTIR) spectroscopy in detecting the changes happened in chemical structure.

Download Full-text

Detection of bloodstains using attenuated total reflectance-Fourier transform infrared spectroscopy supported with PCA and PCA–LDA

Medicine Science and the Law ◽

10.1177/00258024211010926 ◽

2021 ◽

pp. 002580242110109

Author(s):

Sweety Sharma ◽

Rito Chophi ◽

Jaskirandeep Kaur Jossan ◽

Rajinder Singh

Keyword(s):

Fourier Transform ◽

Ftir Spectroscopy ◽

Body Fluid ◽

Due Process ◽

Dna Analysis ◽

Fourier Transform Infrared ◽

Body Fluids ◽

Attenuated Total Reflectance ◽

Total Reflectance ◽

Non Destructive

The most important task in a criminal investigation is to detect and identify the recovered biological stains beyond reasonable scientific doubt and preserve the sample for further DNA analysis. In the light of this fact, many presumptive and confirmatory tests are routinely employed in the forensic laboratories to determine the type of body fluid. However, the currently used techniques are specific to one type of body fluid and hence it cannot be utilized to differentiate multiple body fluids. Moreover, these tests consume the samples in due process, and thus it becomes a great limitation especially considering the fact that samples are recovered in minute quantity in forensic cases. Therefore, such limitations necessitate the use of non-destructive techniques that can be applied simultaneously to all types of bodily fluids and allow sample preservation for further analysis. In the current work, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy has been used to circumvent the aforementioned limitations. The important factors which could influence the detection of blood such as the effect of substrates, washing/chemical treatment, ageing, and dilution limits on the analysis of blood have been analysed. In addition, blood discrimination from non-blood substance (biological and non-biological in nature) has also been studied. Chemometric technique that is PCA–LDA has been used to discriminate blood from other body fluids and it resulted in 100% accurate classification. Furthermore, blood and non-blood substances including fake blood have also been classified into separate clusters with a 100% accuracy, sensitivity, and specificity. All-inclusive, this preliminary study substantiates the potential application of ATR-FTIR spectroscopy for the non-destructive identification of blood traces in simulated forensic casework conditions with 0% rate of false classification.

Download Full-text

Synthesis of Novel Arginine-Based Flame Retardant and Its Application in Lyocell Fabric

Molecules ◽

10.3390/molecules26123588 ◽

2021 ◽

Vol 26 (12) ◽

pp. 3588

Author(s):

Jiayi Chen ◽

Yansong Liu ◽

Jiayue Zhang ◽

Yuanlin Ren ◽

Xiaohui Liu

Keyword(s):

Fourier Transform ◽

Heat Release ◽

Flame Retardant ◽

Photoelectron Spectroscopy ◽

Fourier Transform Infrared ◽

Ftir Analysis ◽

Excellent Thermal Stability ◽

X Ray ◽

Cone Calorimeter Test ◽

Before And After

Lyocell fabrics are widely applied in textiles, however, its high flammability increases the risk of fire. Therefore, to resolve the issue, a novel biomass-based flame retardant with phosphorus and nitrogen elements was designed and synthesized by the reaction of arginine with phosphoric acid and urea. It was then grafted onto the lyocell fabric by a dip-dry-cure technique to prepare durable flame-retardant lyocell fabric (FR-lyocell). X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR) analysis demonstrated that the flame retardant was successfully introduced into the lyocell sample. Thermogravimetric (TG) and Raman analyses confirmed that the modified lyocell fabric featured excellent thermal stability and significantly increased char residue. Vertical combustion results indicated that FR-lyocell before and after washing formed a complete and dense char layer. Thermogravimetric Fourier-transform infrared (TG-FTIR) analysis suggested that incombustible substances (such as H2O and CO2) were produced and played a significant fire retarding role in the gas phase. The cone calorimeter test corroborated that the peak of heat release rate (PHRR) and total heat release (THR) declined by 89.4% and 56.4%, respectively. These results indicated that the flame retardancy of the lyocell fabric was observably ameliorated.

Download Full-text