scholarly journals Gamma-Ray Protection Properties of Bismuth-Silicate Glasses against Some Diagnostic Nuclear Medicine Radioisotopes: A Comprehensive Study

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6668
Author(s):  
Ghada ALMisned ◽  
Hesham M. H. Zakaly ◽  
Shams A. M. Issa ◽  
Antoaneta Ene ◽  
Gokhan Kilic ◽  
...  
Keyword(s):  
Nuclear Medicine ◽  
Gamma Ray ◽  
Effective Atomic Number ◽  
Mean Free Path ◽  
Mass Attenuation Coefficient ◽  
Silicate Glasses ◽  
Bismuth Silicate ◽  
Diagnostic Nuclear Medicine ◽  
Gamma Ray Attenuation ◽  
Comprehensive Study

This study aimed to perform an investigation for the potential implementation of bismuth silicate glasses as novel shield equipment instead of ordinary shields in nuclear medicine facilities. Accordingly, a group of Bi2O3 reinforced silicate glass system were investigated and compared with ordinary shields in terms of their gamma-ray attenuation properties in diagnostic nuclear medicine radioisotope energies emitted from 99mTc, 111In, 67Ga, 123I, 131I, 81mKr, 201Tl, 133Xe. Mass attenuation coefficient (μm) results for glass samples were calculated comparatively with the XCOM program and MCNPX code. The gamma-ray attenuation parameters such as half value layer (HVL), tenth value layer (TVL), mean free path (MFP), effective atomic number (Zeff) were obtained in the diagnostic gamma ray energy range from 75 to 336 keV. To confirm the attenuation performance of superior sample, obtained results were extensively compared with ordinary shielding materials. According to the results obtained, BISI6 glass sample with the highest Bi2O3 additive has an excellent gamma-ray protection.

scholarly journals The Vital Role of La2O3 on the La2O3-CaO-B2O3-SiO2 Glass System for Shielding Some Common Gamma Ray Radioactive Sources

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4776 ◽  
Author(s):  
Hanan Al-Ghamdi ◽  
Mengge Dong ◽  
M. I. Sayyed ◽  
Chao Wang ◽  
Aljawhara H. Almuqrin ◽  
...  
Keyword(s):  
Attenuation Coefficient ◽  
Gamma Ray ◽  
Effective Atomic Number ◽  
Mean Free Path ◽  
Mass Attenuation Coefficient ◽  
Vital Role ◽  
Radiation Shielding ◽  
Linear Attenuation Coefficient ◽  
Sio2 Glass

The role La2O3 on the radiation shielding properties of La2O3-CaO-B2O3-SiO2 glass systems was investigated. The energies were selected between 0.284 and 1.275 MeV and Phy-X software was used for the calculations. BLa10 glass had the least linear attenuation coefficient (LAC) at all the tested energies, while BLa30 had the greatest, which indicated that increasing the content of La2O3 in the BLa-X glasses enhances the shielding performance of these glasses. The mass attenuation coefficient (MAC) of BLa15 decreases from 0.150 cm2/g to 0.054 cm2/g at energies of 0.284 MeV and 1.275 MeV, respectively, while the MAC of BLa25 decreases from 0.164 cm2/g to 0.053 cm2/g for the same energies, respectively. At all energies, the effective atomic number (Zeff) values follow the trend BLa10 < BLa15 < BLa20 < BLa25 < BLa30. The half value thickness (HVL) of the BLa-X glass shields were also investigated. The minimum HVL values are found at 0.284 MeV. The HVL results demonstrated that BLa30 is the most space-efficient shield. The tenth value layer (TVL) results demonstrated that the glasses are more effective attenuators at lower energies, while decreasing in ability at greater energies. These mean free path results proved that increasing the density of the glasses, by increasing the amount of La2O3 content, lowers MFP, and increases attenuation, which means that BLa30, the glass with the greatest density, absorbs the most amount of radiation.

scholarly journals Evaluation of Gamma Radiation Attenuation Characteristics of Different Type Shielding Materials used in Nuclear Medicine Services

2019 ◽  
Vol 21 (2) ◽  
pp. 108-114
Author(s):  
Abdus Sattar Mollah
Keyword(s):  
Nuclear Medicine ◽  
Attenuation Coefficient ◽  
Gamma Ray ◽  
Mean Free Path ◽  
Mass Attenuation Coefficient ◽  
Radiation Shielding ◽  
Linear Attenuation Coefficient ◽  
Lead Glass ◽  
Storage Container ◽  
Absorbing Materials

Gamma-ray radiation shielding properties such as linear attenuation coefficient (m), mass attenuation coefficient (m/r), half- value thickness (HVT), tenth value thickness (TVL) and mean free path (MFP) were calculated for different types of radiation absorbing materials such as Concrete, Aluminum, Iron, Copper, Lead, Lead-glass and Tungsten. These materials are being widely used as radiation shielding materials in different areas of nuclear medicine facilities for different purposes. The XCOM and in-house developed computer program were used to calculate the above mentioned parameters for gamma-ray energies of 100 keV, 200 keV and 511 keV. The gamma-ray energy range used in nuclear medicine is between 100 keV and 511 keV. Results show that attenuation coefficient decreases with increase of gamma-ray energy, and attenuation coefficient increases with increase of density and shows significant variation for different materials. Linear attenuation coefficient depends on the energy of incident gamma-rays and the nature of the absorbing materials. These gamma-ray attenuation parameters of different absorbing materials can be used for proper shielding design of syringe shield, isotope storage container, isotope transport container, personnel protective shield barrier, radioactive waste storage facility etc.  in nuclear medicine services. Bangladesh J. Nuclear Med. 21(2): 108-114, July 2018  

scholarly journals CALCULATION OF GAMMA-RAY ATTENUATION PARAMETERS FOR ALUMINIUM, IRON, ZIRCONIUM, AND TUNGSTEN

2020 ◽  
pp. 60-65
Author(s):  
Hiwa Mohammad Qadr
Keyword(s):  
Gamma Radiation ◽  
Free Path ◽  
Attenuation Coefficient ◽  
Gamma Ray ◽  
Mean Free Path ◽  
Mass Attenuation Coefficient ◽  
Radiation Shielding ◽  
Linear Attenuation Coefficient ◽  
Gamma Ray Attenuation ◽  
And Tungsten

The purpose of this study was to determine the linear attenuation coefficient, the mass attenuation coefficient, Half Value Layer. Tenth Value Layer and Mean Free Path for four different shielding materials such as aluminium, iron, zirconium and tungsten. By using the gamma-radiation energies emitted from 152Eu, 22Na, 137Cs, and 60Co radioactive sources. For this purpose, the attenuation measurements were performed using NaI(TI) detector. Calculated values of all parameters of the all shielding materials were compared with each other. The results of all presented parameters show that, tungsten has the best radiation shielding compared to other shielding materials. Then, the obtained parameters were compared with the theoretical values.

scholarly journals A Systematical Characterization of TeO2–V2O5 Glass System Using Boron (III) Oxide and Neodymium (III) Oxide Substitution: Resistance Behaviors against Ionizing Radiation

2021 ◽  
Vol 11 (7) ◽  
pp. 3035
Author(s):  
H. O. Tekin ◽  
Shams A. M. Issa ◽  
G. Kilic ◽  
Hesham M. H. Zakaly ◽  
N. Tarhan ◽  
...  
Keyword(s):  
Gamma Ray ◽  
Effective Atomic Number ◽  
Mean Free Path ◽  
Radiation Shielding ◽  
Glass System ◽  
Buildup Factor ◽  
Attenuation Coefficients ◽  
Gamma Ray Attenuation ◽  
Buildup Factors

This study aimed to perform an extensive characterization of a 74.75TeO2–0.25V2O5–(25 − x)B2O3-xNd2O3 glass system with (x = 0, 0.5, 1.0, and 1.5 mol%) for radiation shielding properties. Linear and mass attenuation coefficients were determined using Phy-X PSD software and compared with the simulation using Monte Carlo software MCNPX (version 2.7.0). Half value layer, mean free path, tenth value layer, effective atomic number, exposure buildup factor, and energy absorption buildup factors of VTBNd0.0, VTBNd0.5, VTBNd1.0, and VTBNd1.5 glasses were determined, respectively. The results showed that boron (III) oxide and neodymium (III) oxide substitution has an obvious impact on the gamma ray attenuation properties of the studied glasses. It can be concluded that the VTBNd1.5 sample with the highest content of neodymium (III) oxide (1.5 mol%) is the superior sample for shielding of gamma radiation in the investigated energy range.

scholarly journals Development of Novel Transparent Radiation Shielding Glasses by BaO Doping in Waste Soda Lime Silica (SLS) Glass

2022 ◽  
Vol 14 (2) ◽  
pp. 937
Author(s):  
Thair Hussein Khazaalah ◽  
Iskandar Shahrim Mustafa ◽  
M. I. Sayyed ◽  
Azhar Abdul Rahman ◽  
Mohd Hafiz Mohd Zaid ◽  
...  
Keyword(s):  
Gamma Ray ◽  
Effective Atomic Number ◽  
Soda Lime ◽  
Mean Free Path ◽  
Mass Attenuation Coefficient ◽  
Radiation Shielding ◽  
Glass Waste ◽  
Beam Geometry ◽  
Soda Lime Silica Glass ◽  
Quenching Method

In the current study, BaO was doped in Bi2O3-ZnO-B2O3-SLS glass to develop lead-free radiation shielding glasses and to solve the dark brown of bismuth glass. The melt-quenching method was utilized to fabricate (x) BaO (1 − x)[0.3 ZnO 0.2 Bi2O3 0.2 B2O3 0.3 SLS] (where x are 0.01, 0.02, 0.03, 0.04, and 0.05 mol) at 1200 °C. Soda lime silica glass waste (SLS), which is mostly composed of 74.1% SiO2, was used to obtain SiO2. The mass attenuation coefficient (μm) was investigated utilizing X-ray fluorescence (XRF) at 16.61, 17.74, 21.17, and 25.27 keV and narrow beam geometry at 59.54, 662, and 1333 keV. Moreover, the other parameters related to gamma ray shielding properties such as half-value layer (HVL), mean free path (MFP), and effective atomic number (Zeff) were computed depending on μm values. The results indicated that HVL and MFP decreased, whereas μm increased with an increase in BaO concentration. According to these results, it can be concluded that BaO doped in Bi2O3-ZnO-B2O3-SLS glass is a nontoxic, transparent to visible light, and a good shielding material against radiation.

Study on gamma ray shielding performance of concretes doped with natural sepiolite mineral

2018 ◽  
Vol 106 (12) ◽  
pp. 1009-1016 ◽  
Author(s):  
Osman Agar
Keyword(s):  
Attenuation Coefficient ◽  
Gamma Ray ◽  
Morphological Structure ◽  
Mean Free Path ◽  
Mass Attenuation Coefficient ◽  
Linear Attenuation Coefficient ◽  
Attenuation Coefficients ◽  
X Ray ◽  
Edx Analyses ◽  
Gamma Ray Attenuation

Abstract Gamma ray attenuation coefficients for various concrete types containing natural sepiolite mineral and B4C have been experimentally investigated at different gamma energies. In order to obtain the gamma rays, the four radioactive point-isotropic sources 133Ba, 137Cs, 60Co and 22Na which energies ranged from 80.9 to 1332.5 keV have been utilized. The measurements have been carried out by using HPGe detector and MCA equipped with a personal computer. The morphological structure and elemental compositions of the concretes have been measured with scanning electron microscope (SEM) and energy-dispersive X-ray (EDX) analyses. Linear attenuation coefficient (μ), mass attenuation coefficient (μm), half value layer (HVL) and mean free path (MFP) have been calculated for all concretes. The obtained results have been compared to the other materials such as Pb and Al.

New high temperature resistant heavy concretes for fast neutron and gamma radiation shielding

2019 ◽  
Vol 107 (4) ◽  
pp. 359-367 ◽  
Author(s):  
Bünyamin Aygün ◽  
Erdem Şakar ◽  
Turgay Korkut ◽  
Mohammed Ibrahim Sayyed ◽  
Abdülhalik Karabulut
Keyword(s):  
High Temperature ◽  
Cross Sections ◽  
Gamma Ray ◽  
Mean Free Path ◽  
Mass Attenuation Coefficient ◽  
Normal Weight ◽  
Radiation Shielding ◽  
Equivalent Dose Rate ◽  
Normal Weight Concrete ◽  
Geant4 Code

Abstract In the present work, we developed three new high temperature resistant heavy concretes as novel radiation shielding materials. For this purpose, chrome ore (FeCr2O4), hematite (Fe2O3), titanium oxide (TiO2), aluminum oxide (Al2O3), limonite [FeO (OH) nH2O], siderite (FeCO3), barite (BaSO4), nickel oxide (NiO) materials and alumina cement were used. Mass combination ratios of components and total macroscopic cross sections (scattering, absorption, capture, fission) of the samples were calculated by using GEANT4 code. The resistances of the prepared samples were evaluated in terms of compression strength after exposure at the 1000 °C temperature. Neutron equivalent dose rate measurements were carried out by using 4.5 MeV 241Am-Be neutron source and BF3 detector. All results were compared with normal weight concrete and paraffin. The results of neutron dose indicate that neutron absorption ability of the new heavy concretes is higher than normal weight concrete and paraffin. In addition to neutron measurements, different γ-ray shielding parameters such as mass attenuation coefficient (MAC), effective atom numbers (Zeff), half value layer (HVL) and mean free path (MFP) have been calculated using WinXCOM software in order to investigate the effectiveness of using the prepared concretes as a radiation shielding materials. Gamma-ray results were compared with concretes and Pb-based glass.

scholarly journals Measurement of Photon Matter Interaction Parameters for some Iodine Compounds

2020 ◽  
Vol 1 (9) ◽  
pp. 421-426
Author(s):  
Adnan Küçükönder ◽  
Saniye Tekerek
Keyword(s):  
Attenuation Coefficient ◽  
Cross Section ◽  
Gamma Ray ◽  
Effective Atomic Number ◽  
Mass Attenuation Coefficient ◽  
Effective Electron ◽  
Iodine Compounds ◽  
Beam Experiment ◽  
Experimental Values ◽  
Mass Attenuation

In this study, total atomic cross-section (σta), total moleculer cross-section (σtm) total electronic cross-section (σte), effective atomic number (Zeff), effective electron density (Neff) and Kerma (K) were determined both experimentally and theoretically values for some iodine compounds. Experimental mass attenuation coefficient (µ/ρ) values for some iodine compounds were calculated with the data obtained from the test results. The theoretical mass attenuation coefficient values of these compounds were calculated with the WinXCOM data program. Also, we have performed the measurements for the calculations of experimental values mass attenuation coefficient using direct transmission experimental geometry. The transmission photon intensity of halogene iodine compounds were measured in a narrow beam experiment geometry was used 59.543 keV γ-ray from an 241Am radioactive source. The tranmissions spectra from iodine compounds were recorded with a Si (Li) detector having a resolution of 155 eV FWHM at 5.9 keV (55Fe) and coupled to a 1024 channel analyzer through a spectroscopic amplifier. This study was provided that new insights into the literature since mass attenuation coefficient experimental values of some I compounds have not been determined previously. More research should be done to observe the changes in the chemical structure of iodine compounds with gamma-ray interaction. This study will shed light on further research.

scholarly journals Photon Shielding Characterization of SiO2-PbO-CdO-TiO2 Glasses for Radiotheraphy Shielding Application

2021 ◽  
pp. 32-38
Author(s):  
Idris M. Mustapha ◽  
Atimga B. James ◽  
Sulayman M. Bello
Keyword(s):  
Attenuation Coefficient ◽  
Energy Region ◽  
Effective Atomic Number ◽  
Mean Free Path ◽  
Mass Attenuation Coefficient ◽  
Photoelectric Effect ◽  
High Energy ◽  
Radiation Shielding ◽  
Sudden Increase ◽  
Mass Attenuation

In this study, photon attenuation parameters of (30-x) SiO2–15PbO–10CdO-xTiO2, with x = 0, 2, 4, 6, 8 and 10% mol, were determined and their application as shielding material were discussed. The WinXCOM software was used to determine the mass attenuation coefficient of the studied glasses for the energy range (0.015-15MeV). The mass attenuation coefficient of the glass samples first decline up to 0.09 MeV and slightly increase abruptly and then declined uniformly for all the glasses to approximately zero after about 10 MeV.   The effective atomic number (Zeff) was also calculated for the glass samples and were observe to raise from 0.015 to 0.02 MeV and then decreased between 0.02-5 MeV. On account of the dominance of the photoelectric effect in the low energy region, there was a sudden increase in Zeff at about 0.08 MeV close to the absorption edge of the Pb (0.088 MeV). The rapid increment was observed at 0.1–1.5 MeV by transcending typical Compton scattering interaction at intermediate energies for Zeff'’s and began to decrease in the same form again. The lower Zeff   values were found in low and high energy region for all SPCT glasses. The calculated mean free path, half value layer and tenth value layer values were observe to decline as the TiO2 doping of the glasses increased which accounts for the  three photon interaction mechanisms effectiveness in the variation of MFP and HVL values with energy. It can be concluded that SPCT glasses may be considered an alternative material for radiation shielding practices.

scholarly journals Experimental Investigation of Radiation Shielding Competence of Bi2O3-CaO-K2O-Na2O-P2O5 Glass Systems

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5061
Author(s):  
Dalal Abdullah Aloraini ◽  
Aljawhara H. Almuqrin ◽  
M. I. Sayyed ◽  
Hanan Al-Ghamdi ◽  
Ashok Kumar ◽  
...  
Keyword(s):  
Attenuation Coefficient ◽  
Gamma Ray ◽  
Effective Atomic Number ◽  
Mass Attenuation Coefficient ◽  
Radiation Shielding ◽  
The Other ◽  
Linear Attenuation Coefficient ◽  
Attenuation Coefficients ◽  
Positive Effect ◽  
Theoretical Results

The gamma-ray shielding features of Bi2O3-CaO-K2O-Na2O-P2O5 glass systems were experimentally reported. The mass attenuation coefficient (MAC) for the fabricated glasses was experimentally measured at seven energy values (between 0.0595 and 1.33 MeV). The compatibility between the practical and theoretical results shows the accuracy of the results obtained in the laboratory for determining the MAC of the prepared samples. The mass and linear attenuation coefficients (MACs) increase with the addition of Bi2O3 and A4 glass possesses the highest MAC and LAC. A downward trend in the linear attenuation coefficient (LAC) with increasing the energy from 0.0595 to 1.33 MeV is found. The highest LAC is found at 1.33 MeV (in the range of 0.092–0.143 cm−1). The effective atomic number (Zeff) follows the order B1 > A1 > A2 > A3 > A4. This order emphasizes that increasing the content of Bi2O3 has a positive effect on the photon shielding proficiencies owing to the higher density of Bi2O3 compared with Na2O. The half value layer (HVL) is also determined and the HVL for the tested glasses is computed between 0.106 and 0.958 cm at 0.0595 MeV. The glass with 10 mol% of Bi2O3 has lower HVL than the glasses with 0, 2.5, 5, and 7.5 mol% of Bi2O3. So, the A4 glass needs a smaller thickness than the other glasses to shield the same radiation. As a result of the reported shielding parameters, inserting B2O3 provides lower values of these three parameters, which in turn leads to the development of superior photons shields.

Sign in / Sign up

Export Citation Format

Share Document