scholarly journals Concrete Compressive Strength by Means of Ultrasonic Pulse Velocity and Moduli of Elasticity

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7018
Author(s):  
Bogdan Bolborea ◽  
Cornelia Baera ◽  
Sorin Dan ◽  
Aurelian Gruin ◽  
Dumitru-Doru Burduhos-Nergis ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Pulse Velocity ◽  
High Rate ◽  
Dry Density ◽  
Concrete Compressive Strength ◽  
Static Modulus ◽  
Static Modulus Of Elasticity ◽  
Non Destructive ◽  
Moduli Of Elasticity

Developing non-destructive methods (NDT) that can deliver faster and more accurate results is an objective pursued by many researchers. The purpose of this paper is to present a new approach in predicting the concrete compressive strength through means of ultrasonic testing for non-destructive determination of the dynamic and static modulus of elasticity. For this study, the dynamic Poisson’s coefficient was assigned values provided by technical literature. Using ultra-sonic pulse velocity (UPV) the apparent density and the dynamic modulus of elasticity were determined. The viability of the theoretical approach proposed by Salman, used for the air-dry density determination (predicted density), was experimentally confirmed (measured density). The calculated accuracy of the Salman method ranged between 98 and 99% for all the four groups of specimens used in the study. Furthermore, the static modulus of elasticity was deducted through a linear relationship between the two moduli of elasticity. Finally, the concrete compressive strength was mathematically determined by using the previously mentioned parameters. The accuracy of the proposed method for concrete compressive strength assessment ranged between 92 and 94%. The precision was established with respect to the destructive testing of concrete cores. For this research, the experimental part was performed on concrete cores extracted from different elements of different structures and divided into four distinct groups. The high rate of accuracy in predicting the concrete compressive strength, provided by this study, exceeds 90% with respect to the reference, and makes this method suitable for further investigations related to both the optimization of the procedure and = the domain of applicability (in terms of structural aspects and concrete mix design, environmental conditions, etc.).

Estimating the Concrete Compressive Strength by Using the Concrete Ultrasonic Pulse Velocity and Moduli of Elasticity

2021 ◽  
Vol 1164 ◽  
pp. 77-86
Author(s):  
Bogdan Bolborea ◽  
Sorin Dan ◽  
Claudiu Matei ◽  
Aurelian Gruin ◽  
Cornelia Baeră ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Testing ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
High Rate ◽  
Concrete Compressive Strength ◽  
Destructive Testing ◽  
Non Destructive ◽  
Moduli Of Elasticity

Developing a non-destructive method which delivers fast, accurate and non-invasive results regarding the concrete compressive strength, is an important issue, currently investigated by many researchers all over the world. Different methodologies, like using the simple non-destructive testing (NDT) or the fusion of different techniques approach, were taken into consideration in order to find the optimal, most suitable method. The purpose of this paper is to present a new approach in this direction. The methodology consists in predicting the concrete compressive strength through ultrasonic testing, for non-destructive determination of the dynamic and static moduli of elasticity. One important, basic assumption of the proposed methodology considers values provided by technical literature for concrete dynamic Poisson’s coefficient. The air-dry density was experimentally determined on concrete cores. The dynamic modulus of elasticity was also experimentally determined by using the ultrasonic pulse velocity (UPV) method on concrete cores. Further on, the static modulus of elasticity and the concrete compressive strength can be mathematically calculated, by using the previously mentioned parameters. The experimental procedures were performed on concrete specimens, namely concrete cores extracted from the raft foundation of a multistorey building; initially they were subjected to the specific NDT, namely ultrasonic testing, and the validation of the results and the proposed methodology derives from the destructive testing of the specimens. The destructive testing is generally recognized as the most trustable method. The precision of the proposed method, established with respect to the destructive testing, revealed a high level of confidence, exceeding 90% (as mean value). It was noticed that even the cores with compressive strength outside of mean range interval (minimum and maximum values) presented high rate of precision, not influencing the overall result. The high rate of accuracy makes this method a suitable research background for further investigations, in order to establish a reliable NDT methodology which could substitute the very invasive and less convenient, destructive method.

Experimental Analysis of the Development of Compressive Strength, Modulus of Elasticity and Acoustic Emission Parameters of Alkali-Activated Composites

2018 ◽  
Vol 760 ◽  
pp. 266-271
Author(s):  
Dalibor Kocáb ◽  
Libor Topolář ◽  
Vlastimil Bílek Jr. ◽  
Barbara Kucharczyková ◽  
Michaela Hoduláková ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Acoustic Emission ◽  
Modulus Of Elasticity ◽  
Stress Test ◽  
Ultrasonic Pulse ◽  
Static Modulus ◽  
Activated Slag ◽  
Static Modulus Of Elasticity ◽  
Non Destructive ◽  
Alkali Activated

This paper describes an experiment focused on monitoring the development of the modulus of elasticity and the compressive strength of composites that are based on alkali‑activated slag (AAS) during the first 28 days of ageing. The test specimens were tested at the age of 3 and 28 days using two non-destructive methods (ultrasonic pulse and resonance methods) to determine the value of the dynamic modulus of elasticity. Subsequently, the same specimens were used to determine the static modulus of elasticity using compressive stress test, during which the behaviour of the composite was monitored by equipment for recording the acoustic emission in the material. The result of the experiment is the evaluation of the behaviour of the AAS composite in regard to the development of its modulus of elasticity and compressive strength, as well as in regard to the acoustic emission method during loading.

Determining elastic properties of sedimentary strata in terms of limestone samples by laser ultrasonics

2020 ◽  
pp. 125-134
Author(s):  
I. A. Shibaev ◽  
V. A. Vinnikov ◽  
G. D. Stepanov
Keyword(s):  
Physical And Mechanical Properties ◽  
Laser Ultrasonics ◽  
Compression Tests ◽  
S Waves ◽  
Static Modulus ◽  
Enhance Efficiency ◽  
Static Modulus Of Elasticity ◽  
Static Elastic Moduli ◽  
Non Destructive ◽  
Moduli Of Elasticity

Geological engineering often uses geomechanical modeling aimed to enhance efficiency of mining or performance of structures. One of the input parameters for such models are the static elastic moduli of rocks. This article presents the studies into the physical and mechanical properties of rocks-limestone of non-metamorphic diagenesis. The precision measurements of Pand S-waves are carried out to an accuracy of 0.2% by laser ultrasonics. The static moduli of elasticity and the deformation characteristics of rocks are determined in the uniaxial compression tests by the standards of GOST 21153.2-84 and GOST 28985-91, respectively. The correlation dependence is found between the static and dynamic elasticity moduli in limestone samples. The found correlation allows drawing the conclusion that the static modulus of elasticity can be estimated in non-destructive tests, which largely simplifies preliminary diagnostics of samples in case of limited number of test core.

scholarly journals Evaluation of Self-Compacting Concrete Strength with Non-Destructive Tests for Concrete Structures

2019 ◽  
Vol 9 (23) ◽  
pp. 5109 ◽  
Author(s):  
Miguel C. S. Nepomuceno ◽  
Luís F. A. Bernardo
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Surface Hardness ◽  
Pulse Velocity ◽  
Concrete Compressive Strength ◽  
Self Compacting Concrete ◽  
Coarse Aggregates ◽  
Pull Out ◽  
Concrete Maturity ◽  
Non Destructive

Self-compacting concrete (SCC) shows to have some specificities when compared to normal vibrated concrete (NVC), namely higher cement paste dosage and smaller volume of coarse aggregates. In addition, the maximum size of coarse aggregates is also reduced in SCC to prevent blocking effect. Such specificities are likely to affect the results of non-destructive tests when compared to those obtained in NVC with similar compressive strength and materials. This study evaluates the applicability of some non-destructive tests to estimate the compressive strength of SCC. Selected tests included the ultrasonic pulse velocity test (PUNDIT), the surface hardness test (Schmidt rebound hammer type N), the pull-out test (Lok-test), and the concrete maturity test (COMA-meter). Seven sets of SCC specimens were produced in the laboratory from a single mixture and subjected to standard curing. The tests were applied at different ages, namely: 1, 2, 3, 7, 14, 28, and 94 days. The concrete compressive strength ranged from 45 MPa (at 24 h) to 97 MPa (at 94 days). Correlations were established between the non-destructive test results and the concrete compressive strength. A test variability analysis was performed and the 95% confidence limits for the obtained correlations were computed. The obtained results for SCC showed good correlations between the concrete compressive strength and the non-destructive tests results, although some differences exist when compared to the correlations obtained for NVC.

scholarly journals Influence of Hybrid Fibers on Toughness Behavior of High Strength Flowing Concrete

2011 ◽  
Vol 57 (3) ◽  
pp. 249-260 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Hybrid Composite ◽  
High Strength ◽  
Steel Fibers ◽  
Hybrid Fibers ◽  
Static Modulus ◽  
Static Modulus Of Elasticity ◽  
Strength And Toughness

Abstract This study investigates the use of steel fibers and hybrid composite with a total fibers content of 2% on the high strength flowing concrete and determines the density, compressive strength, static modulus of elasticity, flexural strength and toughness indices for the mixes. The results show that the inclusion of more than 0.5% of palm fibers in hybrid fibers mixes reduces the compressive strength. The hybrid fibers can be considered as a promising concept and the replacement of a portion of steel fibers with palm fibers can significantly reduce the density, enhance the flexural strength and toughness. The results also indicates that the use of hybrid fibers (1.5 steel fibers + 0.5% palm fibers) in specimens increases significantly the toughness indices and thus the use of hybrid fibers combinations in reinforced concrete would enhance their flexural toughness & rigidity and enhance their overall performances

scholarly journals Assessment of Concrete Compressive Strength by Ultrasonic Non-Destructive Test

2021 ◽  
Vol 318 ◽  
pp. 03004
Author(s):  
AbdulMuttalib I. Said ◽  
Baqer Abdul Hussein Ali
Keyword(s):  
Compressive Strength ◽  
Salt Content ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Experimental Program ◽  
Concrete Compressive Strength ◽  
Statistical Program ◽  
Non Destructive ◽  
Accurate Relation

This paper has carried out an experimental program to establish a relatively accurate relation between the ultrasonic pulse velocity (UPV) and the concrete compressive strength. The program involved testing concrete cubes of (100) mm and prisms of (100×100×300) cast with specified test variables. The samples are tested by using ultrasonic test equipment with two methods, direct ultrasonic pulse (DUPV) and surface (indirect) ultrasonic pulse (SUPV) for each sample. The obtained results were used as input data in the statistical program (SPSS) to predict the best equation representing the relation between the compressive strength and the ultrasonic pulse velocity. In this research 383 specimens were tested, and an exponential equation is proposed for this purpose. The statistical program has been used to prove which type of UPV is more suitable, the (SUPV) test or the (DUPV) test, to represent the relation between the ultrasonic pulse velocity and the concrete compressive strength. In this paper, the effect of salt content on the connection between the ultrasonic pulse velocity and the concrete compressive strength has also been studied.

Non-Destructive Testing for Concrete: Dynamic Modulus and Ultrasonic Velocity Measurements

2011 ◽  
Vol 243-249 ◽  
pp. 165-169 ◽  
Author(s):  
Iqbal Khan Mohammad
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Non Destructive Testing ◽  
Destructive Testing ◽  
Dynamic Modulus Of Elasticity ◽  
Non Destructive

Nondestructive testing (NDT) is a technique to determine the integrity of a material, component or structure. The commonly NDT methods used for the concrete are dynamic modulus of elasticity and ultrasonic pulse velocity. The dynamic modulus of elasticity of concrete is related to the structural stiffness and deformation process of concrete structures, and is highly sensitive to the cracking. The velocity of ultrasonic pulses travelling in a solid material depends on the density and elastic properties of that material. Non-destructive testing namely, dynamic modulus of elasticity and ultrasonic pulse velocity was measured for high strength concrete incorporating cementitious composites. Results of dynamic modulus of elasticity and ultrasonic pulse velocity are reported and their relationships with compressive strength are presented. It has been found that NDT is reasonably good and reliable tool to measure the property of concrete which also gives the fair indication of the compressive strength development.

Sign in / Sign up

Export Citation Format

Share Document