scholarly journals Metasurfaces for Far-Field Radiation Pattern Correction of Antennas under Dielectric Seamed-Radomes

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 665
Author(s):  
Riccardo Cacocciola ◽  
Badreddine Ratni ◽  
Nicolas Mielec ◽  
Emmanuel Mimoun ◽  
Shah Nawaz Burokur
Keyword(s):  
Transverse Electric ◽  
Transverse Magnetic ◽  
Microwave Antenna ◽  
Proof Of Concept ◽  
Suppression Effect ◽  
Full Wave ◽  
Field Radiation ◽  
Polarization Insensitive ◽  
Fabrication Tolerances ◽  
Transverse Magnetic Wave

A high-index dielectric radome seam is camouflaged with respect to a low-index dielectric radome panel by tuning the seam with carefully engineered metasurfaces. A transmission-line approach is used to model the metasurface-tuned seam and analytically retrieve the corresponding surface impedance, from which the unit-cell design is then tailored. Full-wave simulations and microwave antenna measurements performed on a proof-of-concept prototype validate the undesired scattering suppression effect in the case of normally and obliquely incident transverse electric and transverse magnetic wave illuminations. Robustness of the proposed solution to fabrication tolerances is also reported. The study presents metasurface-tuning as an easily implementable, frequency adjustable, and polarization insensitive solution to reduce the scattering of dielectric mechanical seams and improve the overall transparency performance of radome structures.

scholarly journals Quad-Band Plasmonic Perfect Absorber for Visible Light with a Patchwork of Silicon Nanorod Resonators

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1954 ◽  
Author(s):  
Can Cao ◽  
Yongzhi Cheng
Keyword(s):  
Visible Light ◽  
Transverse Electric ◽  
Transverse Magnetic ◽  
Localized Surface Plasmon ◽  
Perfect Absorber ◽  
Absorption Properties ◽  
Perfect Absorption ◽  
Potential Applications ◽  
Polarization Insensitive ◽  
Band Absorption

In this paper, a plasmonic perfect absorber (PPA) based on a silicon nanorod resonator (SNRR) for visible light is proposed and investigated numerically. The proposed PPA is only a two-layer nanostructure consisting of a SNRR periodic array and metal substrate. The perfect absorption mainly originates from excitation of the localized surface plasmon resonance (LSPR) mode in the SNRR structure. The absorption properties of this design can be adjusted by varying the radius (r) and height (h) of the SNRR structure. What is more, the stronger quad-band absorption can be achieved by combing four different radius of the SNRR in one period as a super unit-cell. Numerical simulation indicates that the designed quad-band PPA can achieve the absorbance of 99.99%, 99.8%, 99.8%, and 92.2% at 433.5 THz, 456 THz, 482 THz, and 504.5 THz, respectively. Further simulations show that the proposed PPA is polarization-insensitive for both transverse electric (TE) and transverse magnetic (TM) modes. The proposed PPA can be a desirable candidate for some potential applications in detecting, sensing, and visible spectroscopy.

scholarly journals A Broadband Polarization-Insensitive Graphene Modulator Based on Dual Built-in Orthogonal Slots Plasmonic Waveguide

2021 ◽  
Vol 11 (4) ◽  
pp. 1897
Author(s):  
Wei Chen ◽  
Yan Xu ◽  
Yang Gao ◽  
Lanjing Ji ◽  
Xibin Wang ◽  
...  
Keyword(s):  
High Speed ◽  
Transverse Electric ◽  
Modulation Depth ◽  
Transverse Magnetic ◽  
Plasmonic Effect ◽  
Te Mode ◽  
Tm Mode ◽  
Electro Optic ◽  
Polarization Insensitive ◽  
Electro Optic Modulator

A broadband polarization-insensitive graphene modulator has been proposed. The dual built-in orthogonal slots waveguide allows polarization independence for the transverse electric (TE) mode and the transverse magnetic (TM) mode. Due to the introduction of metal slots in both the vertical and horizontal directions, the optical field as well as the electro-absorption of graphene are enhanced by the plasmonic effect. The proposed electro-optic modulator shows a modulation depth of 0.474 and 0.462 dB/μm for two supported modes, respectively. An ultra-low effective index difference of 0.001 can be achieved within the wavelength range from 1100 to 1900 nm. The 3 dB-bandwidth is estimated to be 101 GHz. The power consumption is 271 fJ/bit at a modulation length of 20 μm. The proposed modulator provides high speed broadband solutions in microwave photonic systems.

scholarly journals Broadband microwave metamaterial absorber with lumped resistor loading

2019 ◽  
Vol 6 ◽  
pp. 1 ◽  
Author(s):  
Ke Chen ◽  
Xinyao Luo ◽  
Guowen Ding ◽  
Junming Zhao ◽  
Yijun Feng ◽  
...  
Keyword(s):  
Electromagnetic Compatibility ◽  
Design Principle ◽  
Transverse Electric ◽  
Transverse Magnetic ◽  
Metamaterial Absorber ◽  
Absorption Bandwidth ◽  
Practical Applications ◽  
Angular Performance ◽  
Polarization Insensitive ◽  
Metamaterial Absorbers

Narrow absorption bandwidth has been a fundamental drawback hindering many metamaterial absorbers for practical applications. In this paper, by loading lumped resistors, we have successfully designed a microwave metamaterial absorber with multioctave wide absorption bandwidth covering the entire X- and Ku-bands, while keeping the thickness of the absorber less than 1/10 of the working wavelength. The polarization-insensitive absorber shows a good angular stability for both transverse electric (TE) and transverse magnetic (TM) incidences. Prototype has been fabricated and measured to validate the design principle and the simulated results, and good agreements are observed between simulated and measured results. The proposed metamaterial absorber offers an efficient way to realize broadband microwave absorption with stable angular performance, which may find potential uses in many applications, for example, electromagnetic compatibility.

scholarly journals Polarization-Insensitive Phase Modulators Based on an Embedded Silicon-Graphene-Silicon Waveguide

2019 ◽  
Vol 9 (3) ◽  
pp. 429 ◽  
Author(s):  
Xinhai Zou ◽  
Yujia Zhang ◽  
Zhihui Li ◽  
Yiwei Yang ◽  
Shangjian Zhang ◽  
...  
Keyword(s):  
Wavelength Range ◽  
Transverse Electric ◽  
Transverse Magnetic ◽  
Waveguide Structure ◽  
Phase Modulator ◽  
Modulation Bandwidth ◽  
Silicon Waveguide ◽  
Phase Modulators ◽  
Compact Size ◽  
Polarization Insensitive

A polarization-insensitive phase modulator concept is presented, based on an embedded silicon-graphene-silicon waveguide. Simulation results show that the effective mode index of both transverse electric (TE) and transverse magnetic (TM) modes in the silicon-graphene-silicon waveguide undergoes almost the same variations under different biases across a broad wavelength range, in which the real-part difference is less than 1.2 × 10−3. Based on that, a polarization-insensitive phase modulator is demonstrated, with a 3-dB modulation bandwidth of 135.6 GHz and a wavelength range of over 500 nm. Moreover, it has a compact size of 60 μm, and a low insertion loss of 2.12 dB. The proposed polarization-insensitive waveguide structure could be also applied to Mach-Zehnder modulators and electro-absorption modulators.

Single-peak-regulation and wide-angle dual-band metamaterial absorber based on hollow-cross and solid-cross resonators

2020 ◽  
Vol 91 (3) ◽  
pp. 30901
Author(s):  
Yibo Tang ◽  
Longhui He ◽  
Jianming Xu ◽  
Hailang He ◽  
Yuhan Li ◽  
...  
Keyword(s):  
Transverse Electric ◽  
Surface Current ◽  
Dielectric Substrate ◽  
Transverse Magnetic ◽  
Metamaterial Absorber ◽  
Absorption Peak ◽  
Dual Band ◽  
Single Peak ◽  
Wide Angle ◽  
Surface Current Density

A dual-band microwave metamaterial absorber with single-peak regulation and wide-angle absorption has been proposed and illustrated. The designed metamaterial absorber is consisted of hollow-cross resonators, solid-cross resonators, dielectric substrate and metallic background plane. Strong absorption peak coefficients of 99.92% and 99.55% are achieved at 8.42 and 11.31 GHz, respectively, which is basically consistent with the experimental results. Surface current density and changing material properties are employed to illustrate the absorptive mechanism. More importantly, the proposed dual-band metamaterial absorber has the adjustable property of single absorption peak and could operate well at wide incidence angles for both transverse electric (TE) and transverse magnetic (TM) waves. Research results could provide and enrich instructive guidances for realizing a single-peak-regulation and wide-angle dual-band metamaterial absorber.

Magnetic plasmons induced in a dielectric-metal heterostructure by optical magnetism

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Shulei Li ◽  
Lidan Zhou ◽  
Mingcheng Panmai ◽  
Jin Xiang ◽  
Sheng Lan
Keyword(s):  
Transverse Electric ◽  
Incidence Angle ◽  
High Sensitivity ◽  
Critical Value ◽  
Transverse Magnetic ◽  
Quality Factors ◽  
Light Spectrum ◽  
Optical Resonances ◽  
Scattering Spectra ◽  
Plasmon Polaritons

Abstract We investigate numerically and experimentally the optical properties of the transverse electric (TE) waves supported by a dielectric-metal heterostructure. They are considered as the counterparts of the surface plasmon polaritons (i.e., the transverse magnetic (TM) waves) which have been extensively studied in the last several decades. We show that TE waves with resonant wavelengths in the visible light spectrum can be excited in a dielectric-metal heterostructure when the optical thickness of the dielectric layer exceeds a critical value. We reveal that the electric and magnetic field distributions for the TE waves are spatially separated, leading to higher quality factors or narrow linewidths as compared with the TM waves. We calculate the thickness, refractive index and incidence angle dispersion relations for the TE waves supported by a dielectric-metal heterostructure. In experiments, we observe optical resonances with linewidths as narrow as ∼10 nm in the reflection or scattering spectra of the TE waves excited in a Si3N4/Ag heterostructure. Finally, we demonstrate the applications of the lowest-order TE wave excited in a Si3N4/Ag heterostructure in optical display with good chromaticity and optical sensing with high sensitivity.

Sensitivity characterization of polarization operating by embedded reflective grating

2021 ◽  
Author(s):  
Jiaman Hong ◽  
Bo Wang ◽  
Xiaoqing Zhu ◽  
Zhichao Xiong ◽  
Yusen Huang ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Electric Field Intensity ◽  
High Efficiency ◽  
Transverse Electric ◽  
Tolerance Analysis ◽  
Transverse Magnetic ◽  
Infrared Band ◽  
Element Analysis ◽  
Field Intensity Distribution

In this paper, a novel embedded reflective grating (ERG) is presented to realize bi-function polarization operating at infrared band by finite element analysis (FEM). For transverse electric (TE) polarization, a two-port output (0th and −2nd orders) with an efficiency of more than 47% and excellent uniformity can be obtained. For transverse magnetic (TM) polarization, a high efficiency output of 94.72% can be achieved at the −2th order. The results of the analysis of the electric field intensity distribution, angular and wavelength bandwidths further demonstrate the advantages of the proposed grating. In addition, the tolerance analysis of period and duty cycle prove the feasibility of the grating in practical production.

Sign in / Sign up

Export Citation Format

Share Document