scholarly journals Hot-Deformation Behavior and Processing Maps of a Low-Carbon Fe-2 wt% Nb Steel

Metals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1939
Author(s):  
Wentao Luo ◽  
Pengzhan Cai ◽  
Ziyong Hou ◽  
Yuhui Wang ◽  
Ling Zhang ◽  
...  
Keyword(s):  
Hot Deformation ◽  
Deformation Behavior ◽  
Processing Parameters ◽  
Dual Phase ◽  
Processing Maps ◽  
Low Carbon ◽  
Compression Tests ◽  
Optimum Parameters ◽  
Deformation Behaviors ◽  
Different Strains

In the present work, the deformation behavior and processing maps of a low-carbon Fe-2 wt% Nb steel were studied by means of hot-compression tests at temperatures of 800–1150 °C and strain rates of 0.01–10 s−1. The hot-processing maps at different strains and corresponding microstructural evolution were constructed and discussed. The hot-deformation behaviors of two different phase regions, i.e., austenite + NbC dual-phase and ferrite + NbC dual-phase, were predicted by determining the constitutive equations using Arrhenius-type and Zener–Hollomon models. The results suggest that the hot-deformed microstructures of the material present a strong correlation with the processing parameters in the hot-processing maps. In addition, the optimum parameters based on the processing maps were obtained, and the instable and the safe domains during the hot deformation in the hot-processing maps provide solid theoretical guidance for industrial production.

Study on Hot Deformation Behavior and Processing Maps of Cu-0.35Cr-0.15Zr Alloy

2011 ◽  
Vol 189-193 ◽  
pp. 1456-1464
Author(s):  
Jiao Yan Dai ◽  
Si Guo Mu ◽  
Yong Ru Wang
Keyword(s):  
Hot Deformation ◽  
Deformation Behavior ◽  
Flow Behavior ◽  
Processing Parameters ◽  
Processing Maps ◽  
Compression Tests ◽  
Hot Deformation Behavior ◽  
Dynamic Materials ◽  
Hyperbolic Sine ◽  
Dynamic Materials Model

The hot deformation behavior of Cu-0.35Cr-0.15Zr (wt.%) alloy was investigated by hot compression tests using a Gleeble-1500D thermal simulator system. The tests were performed under the conditions of 700°С- 820°С temperature and 0.01-10s-1strain rate. The results show that the flow behavior of the studied alloy could be described by the hyperbolic sine constitutive equation, and an active energy of 597.53 kJ/mol was calculated. The processing maps were obtained and analyzed according to the dynamic materials model. The optimum processing parameters of hot deformation of this alloy in the range of this experiment can be attained by the maps. The hot deformation temperature was 800-820°C and the strain rate was 0.01-0.1s-1.The instability zones of flow behavior can also be recognized by the maps.

scholarly journals Hot Deformation Behavior Considering Strain Effects and Recrystallization Mechanism of an Al-Zn-Mg-Cu Alloy

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1743 ◽  
Author(s):  
Lei Luo ◽  
Zhiyi Liu ◽  
Song Bai ◽  
Juangang Zhao ◽  
Diping Zeng ◽  
...  
Keyword(s):  
Dynamic Recrystallization ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Processing Parameters ◽  
Strain Rate Range ◽  
Hot Compression ◽  
Processing Maps ◽  
Hot Deformation Behavior ◽  
Recrystallization Mechanism ◽  
Cu Alloy

The hot deformation behavior of an Al-Zn-Mg-Cu alloy was investigated by hot compression test at deformation temperatures varying from 320 to 440 °C with strain rates ranging from 0.01 to 10 s−1. The results show that the Mg(Zn, Cu)2 particles as a result of the sufficient static precipitation prior to hot compression have an influence on flow softening. A constitutive model compensated with strain was developed from the experimental results, and it proved to be accurate for predicting the hot deformation behavior. Processing maps at various strains were established. The microstructural evolution demonstrates that the dominant dynamic softening mechanism stems from dynamic recovery (DRV) and partial dynamic recrystallization (DRX). The recrystallization mechanism is continuous dynamic recrystallization (CDRX). The microstructure observations are in good agreement with the results of processing maps. On account of the processing map and microstructural observation, the optimal hot processing parameters at a strain of 0.6 are at deformation temperature range of 390–440 °C and strain rate range of 0.010–0.316 s−1 with a peak efficiency of 0.390.

scholarly journals Hot Deformation Behavior and Processing Maps of Fe-30Mn-0.11C Steel

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1940 ◽  
Author(s):  
Jianmei Kang ◽  
Yuhui Wang ◽  
Zhimeng Wang ◽  
Yiming Zhao ◽  
Yan Peng ◽  
...  
Keyword(s):  
Dynamic Recrystallization ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
True Strain ◽  
Peak Stress ◽  
Strain Rates ◽  
Processing Maps ◽  
Compression Tests ◽  
Hot Deformation Behavior ◽  
High Deformation

Hot deformation behavior of Fe-30Mn-0.11C steel was investigated. Hot compression tests were carried out at various temperatures ranging from 800 °C to 1200 °C and at different strain rates of 0.01 s−1 to 10 s−1. The constitutive equation based on peak stress was established. Hot processing maps at different strains and recrystallization diagrams were also established and analyzed. The results show that dynamic recrystallization easily occur at high deformation temperatures and low strain rates. Safe and unstable zones are determined at the true strain of 0.6 and 0.7, and the hot deformation process parameters of partial dynamic recrystallization of the tested steel are also obtained.

scholarly journals Role of Vanadium Addition on Hot Deformation Behavior of Aluminum Alloy 5083

Metals ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 766
Author(s):  
Wang ◽  
Wang ◽  
Zhu ◽  
Xu ◽  
Cui ◽  
...  
Keyword(s):  
Activation Energy ◽  
Grain Size ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Strain Rates ◽  
Processing Maps ◽  
Compression Tests ◽  
Hot Deformation Behavior ◽  
Aluminum Alloy 5083

The effect of V addition on the hot deformation behavior of AA5083 was investigated. Single axial compression tests were conducted on the cast and homogenized samples with strain rates ranging from 0.01 to 10 s−1 and deformation temperatures ranging from 300 to 450 °C. The results showed that the contents of V (0–0.10, in wt.%) do not change the grain size of alloy 5083 significantly in the as cast and homogenized conditions, but the formation of fine Al3V particles in the alloy with an addition of 0.05 wt.% V can increase the flow stress, and its activation energy is 10.0% higher than that of V-free alloy 5083. The processing maps show that the appropriate process domain for alloy 5083 with 0.05 wt.% V changes at different true strains. The mechanism for deformation softening is discussed as well.

scholarly journals Hot-Deformation Behavior and Microstructure Evolution of the Dual-Scale SiCp/A356 Composites Based on Optimal Hot-Processing Parameters

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2825 ◽  
Author(s):  
Yahu Song ◽  
Aiqin Wang ◽  
Douqin Ma ◽  
Jingpei Xie ◽  
Zhen Wang ◽  
...  
Keyword(s):  
Microstructure Evolution ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Aluminum Matrix ◽  
Processing Parameters ◽  
Aluminum Matrix Composites ◽  
Compression Tests ◽  
Hot Deformation Behavior ◽  
Sic Particles ◽  
Dual Scale

Hot deformation at elevated temperature is essential to densify particle-reinforced aluminum matrix composites (AMCs) and improve their performance. However, hot deformation behavior of the AMCs is sensitive to the variation of hot-processing parameters. In this paper, optimal processing parameters of dual-scale SiCp/A356 composites were determined to explore the control strategy of the microstructure. Hot-compression tests were conducted at temperatures ranging from 460 to 520 °C under strain rates from 0.01 to 5 s−1. Constitutive equation and processing maps were presented to determine the hot-processing parameters. Microstructure evolution of the dual-scale SiCp/A356 composites was analyzed. The strain rate of 0.62–5 s−1 and deformation temperature of 495–518 °C is suitable for the hot processing. The number of dynamic recrystallization (DRX) grains in the “safe” domains is larger and the dislocation density is lower compared to those of instability domains. DRX grains mainly occurred around SiC particles. The presence of SiC particles can promote effectively the DRX nucleation, which results in the dynamic softening mechanism of the dual-scale SiCp/A356 composites being dominated by DRX.

Hot Deformation Behavior and Processing Maps of 7050 Aluminum Alloy

2013 ◽  
Vol 815 ◽  
pp. 37-42 ◽  
Author(s):  
Yu Juan Guo ◽  
Lei Deng ◽  
Xin Yun Wang ◽  
Jun Song Jin ◽  
Wen Wu Zhou
Keyword(s):  
Strain Rate ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Strain Rate Range ◽  
Processing Maps ◽  
Compression Tests ◽  
Hot Deformation Behavior ◽  
Temperature Range ◽  
Optimal Processing ◽  
Working Region

The hot deformation behavior of 7050aluminum alloy was investigated by hot compression tests in the temperature range of 573-773K and the strain rate ranging from 0.001s-1to 10 s-1.The flow curves showed that the flow stresses increase with the increase of strain rate or the decrease of temperature.In order to determine the optimal processing conditions, hot processing maps were established based on experimental data and Dynamic Materials Model. The processing maps indicate that instability occur at low temperature and high strain rate. The optimum hot working region is the domain in the temperature range of 673-723K and strain rate range of 0.001-0.01 s-1,where typical recrystallization was observed in the optical microstructures.

scholarly journals Hot Deformation Behavior of Non-Alloyed Carbon Steels

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 595
Author(s):  
Petr Kawulok ◽  
Petr Opěla ◽  
Ivo Schindler ◽  
Rostislav Kawulok ◽  
Stanislav Rusz ◽  
...  
Keyword(s):  
Flow Stress ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Critical Strain ◽  
Carbon Steels ◽  
Carbon Equivalent ◽  
Peak Strain ◽  
Low Carbon ◽  
Compression Tests ◽  
Hot Deformation Behavior

The hot deformation behavior of selected non-alloyed carbon steels was investigated by isothermal continuous uniaxial compression tests. Based on the analysis of experimentally determined flow stress curves, material constants suitable for predicting peak flow stress σp, peak strain εp and critical strain εcrDRX necessary to induce dynamic recrystallization and the corresponding critical flow stresses σcrDRX were determined. The validity of the predicted critical strains εcrDRX was then experimentally verified. Fine dynamically recrystallized grains, which formed at the boundaries of the original austenitic grains, were detected in the microstructure of additionally deformed specimens from low-carbon investigated steels. Furthermore, equations describing with perfect accuracy a simple linear dependence of the critical strain εcrDRX on peak strain εp were derived for all investigated steels. The determined hot deformation activation energy Q decreased with increasing carbon content (also with increasing carbon equivalent value) in all investigated steels. A logarithmic equation described this dependency with reasonable accuracy. Individual flow stress curves of the investigated steels were mathematically described using the Cingara and McQueen model, while the predicted flow stresses showed excellent accuracy, especially in the strains ranging from 0 to εp.

Hot Deformation Studies of a Low Carbon Steel Containing V

2013 ◽  
Vol 554-557 ◽  
pp. 1224-1231 ◽  
Author(s):  
Cecilia Poletti ◽  
Martina Dikovits ◽  
Javier Ruete
Keyword(s):  
Strain Rate ◽  
Hot Deformation ◽  
Flow Instability ◽  
True Strain ◽  
Low Carbon Steel ◽  
Dynamic Effect ◽  
Rate Sensitivity ◽  
Low Carbon ◽  
Compression Tests ◽  
Deformation Parameters

Low alloyed steels produced by continuous casting are thermomechanically treated to achieve final high mechanical properties, meaning a good combination of strength and toughness. The hot deformation mechanisms of a micro-alloyed steel containing up to 0.1wt% of V is studied by means of hot compression tests using a Gleeble®3800 device. Austenitization of samples is carried out at 1150°C during 2 minutes followed by cooling to the deformation temperature at 1Ks-1in the range of 750 – 1150°C. The studied strain rate range is from 0.01 to 80 s-1and the total true strain achieved is of 0.7. In situ water quenching is applied after the deformation to freeze the microstructure and avoid any post dynamic effect. The Ar3temperature is determined by dilatometry experiments to be 725°C for the used cooling rate. The stress values obtained from the compression tests are evaluated at different strains to determine the strain rate sensitivity and flow instability maps and thus, to predict the formability of the material in the range of studied deformation parameters. These maps are correlated to the microstructure at specific deformation parameters.

Sign in / Sign up

Export Citation Format

Share Document