scholarly journals Microstructures and Mechanical Properties of Mg-9Al/Ti Metallurgical Bonding Prepared by Liquid-Solid Diffusion Couples

Metals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 778 ◽  
Author(s):  
Jiahong Dai ◽  
Bin Jiang ◽  
Qiong Yan ◽  
Hongmei Xie ◽  
Zhongtao Jiang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Shear Strength ◽  
Treatment Time ◽  
Interface Reaction ◽  
Heat Treatment Time ◽  
Diffusion Couples ◽  
Solid Diffusion ◽  
Metallurgical Bonding ◽  
Microstructures And Mechanical Properties

Microstructures and mechanical properties of Mg-9Al/Ti metallurgical bonding prepared by liquid-solid diffusion couples were investigated. The results indicate that a metallurgical bonding was formed at the interface Mg-9Al/Ti, and the Mg17Al12 phase growth coarsening at the interfaces with the increase in heat treatment time. Push-out testing was used to investigate the shear strength of the Mg-9Al/Ti metallurgical bonding. It is shown that the shear strength presents an increasing tendency with the increased heat treatment time. The sequence is characterized, and the results show that the fracture takes place along the Mg-9Al matrix at the interface. The diffusion of Al and Ti elements play a dominant role in the interface reaction of Mg-9Al/Ti metallurgical bonding. By energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and thermodynamic analysis, it was found that Al3Ti is the only intermetallic compound at the interface of Mg-9Al/Ti metallurgical bonding. These results clearly show that chemical interaction at the interface formation of Al3Ti improves the mechanical properties of Mg-9Al/Ti metallurgical bonding.

Mechanical Properties of Sol-Gel Inorganic-Organic Hybrid Films in Nanoindentation

2006 ◽  
Vol 317-318 ◽  
pp. 317-322 ◽  
Author(s):  
J.Q. Zhang ◽  
Atsunori Matsuda ◽  
Hiroyuki Muto ◽  
Mototsugu Sakai
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Treatment Time ◽  
Sol Gel ◽  
Heat Treatment Time ◽  
Nanoindentation Test ◽  
Glass Substrates ◽  
Organic Hybrid ◽  
Elastoplastic Properties ◽  
Heat Treated

Methylsilsesquioxane films were formed on glass substrates by dropping a sol prepared from methyltriethoxysilane and then heat-treated in an oven. Nanoindentation test was performed to assess the elastoplastic properties of the films, including the relative residual depth ξr, Meyer hardness HM, work-of-indentation WI and the elastic modulus E’. The values of ξr, HM and WI were obtained by a Berkovich indenter and E’ was determined by a spherical indenter on the basis of Hertz elastic theory. ξr decreased with the increase in the heat treatment time, whereas HM , WI and E’ significantly increased with the time. The changes in the mechanical properties with the heat treatment time well reflected the evolution of the Si-O-Si network structure in methylsilsequioxane film.

Experimental Study on Mechanical Properties and Microstructure of 2.25Cr1Mo0.25V Steel by the Influence of Heat Treatment and Welding

2018 ◽  
Author(s):  
Qing Li ◽  
Guangxu Cheng ◽  
Mu Qin ◽  
Zaoxiao Zhang
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Base Metal ◽  
Arc Welding ◽  
Treatment Time ◽  
Welding Process ◽  
Heat Treatment Time ◽  
Evolution Of Microstructure ◽  
Welding Metal ◽  
Submerged Arc

In this paper, the mechanical properties and microstructural changes of 2.25Cr1Mo0.25V steel under different heat treatment and welding process were investigated. The heat treatment of steel during practical processing is taken as a reference. Different heat treatment time are used to obtain samples with different condition. Automatic submerged arc welding was used to obtain welding sample. The mechanical properties of different samples are obtained by tensile test; the evolution of microstructure and precipitates of different sample with heat treatment and welding was studied on scanning electron microscopy. The experimental results show that with the increase of heat treatment time, the strength of the samples decreases and the plasticity remains nearly constant. Heat treatment also affects the precipitation of carbides; the longer the heat treatment time is, the more precipitates are. Compared with the base metal, the welding metal sample has higher strength. The amount of precipitates in welding metal is much larger than it in base metal. The research on precipitation shows that there are different kinds of precipitates which have different morphologies in welding metal.

ALUMINUM 319.0

Alloy Digest ◽  
1985 ◽  
Vol 34 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Rear Axle ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract ALUMINUM 319.0 is a general-purpose foundry alloy that is moderately responsive to heat treatment. It has excellent casting characteristics and good mechanical properties. Among its many uses are crankcases, housings, engine parts, typewriter frames and rear-axle housings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on low and high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-256. Producer or source: Various aluminum companies.

The Effect of Aging Heat Treatment on the Microstructure and Mechanical Properties of 10Cr20Ni25Mo1.5NbN Austenitic Steel

2016 ◽  
Vol 35 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Zhiyuan Liang ◽  
Wanhua Sha ◽  
Qinxin Zhao ◽  
Chongbin Wang ◽  
Jianyong Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Heat Treatment ◽  
Austenitic Steel ◽  
Treatment Time ◽  
Aging Treatment ◽  
Secondary Phases ◽  
Aging Heat Treatment ◽  
Microstructure And Mechanical Properties ◽  
The Impact

AbstractThe effect of aging heat treatment on the microstructure and mechanical properties of 10Cr20Ni25Mo1.5NbN austenitic steel was investigated in this article. The microstructure was characterized by scanning electron microscopy, energy dispersive spectrometry and transmission electron microscopy. Results show that the microstructure of 10Cr20Ni25Mo1.5NbN austenitic is composed of austenite. This steel was strengthened by precipitates of secondary phases that were mainly M23C6 carbides and NbCrN nitrides. As aging treatment time increased, the tensile strength first rose (0–3,000 h) and then fell (3,000–5,000 h) due to the decrease of high density of dislocations. The impact absorbed energy decreased sharply, causing the sulfides to precipitate at the grain boundary. Therefore, the content of sulfur should be strictly controlled in the steelmaking process.

Sign in / Sign up

Export Citation Format

Share Document