scholarly journals Sandstone-Hosted Uranium Deposits as a Possible Source for Critical Elements: The Eureka Mine Case, Castell-Estaó, Catalonia

Minerals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 34 ◽  
Author(s):  
Montgarri Castillo-Oliver ◽  
Joan Carles Melgarejo ◽  
Lisard Torró ◽  
Cristina Villanova-de-Benavent ◽  
Marc Campeny ◽  
...  
Keyword(s):  
Organic Matter ◽  
Low Temperature ◽  
Black Shales ◽  
Hydrothermal Fluids ◽  
Uranium Deposits ◽  
Critical Metals ◽  
Fine Grained ◽  
Critical Elements ◽  
By Products ◽  
Red Bed

The Eureka deposit in Castell-estaó in the Catalan Pyrenees is a Cu–U–V deposit, hosted by Triassic red-bed sandstones, and classified here as a low-temperature, sandstone-hosted stratabound metamorphite U deposit. The main mineralisation is stratabound, related to coal-bearing units and produced during the Alpine deformation by migration of hydrothermal fluids. In this stage, the original sedimentary and diagenetic components (quartz and calcite, micas, hematite and locally apatite) were replaced by a complex sequence of roscoelite, fine-grained REE phosphates, sulphides and Ni–Co arsenides and sulpharsenides, Ag–Pb selenides, bismuth phases, sulphosalts and uraninite. The black shales of the Silurian sediments underlying the deposit and the nearby Carboniferous volcanoclastic rocks are interpreted as the source of the redox-sensitive elements concentrated in Eureka. The sulphur source is related to leaching of the evaporitic Keuper facies. The REE transport would be facilitated by SO4-rich solutions. The reduction of these solutions by interaction with organic matter resulted in the widespread precipitation of REE and redox-sensitive elements, including many critical metals (V, Bi, Sb, Co), whereas barite precipitated in the oxidized domains. The occurrence of similar enrichments in critical elements can be expected in other similar large uranium deposits, which could be a source of these elements as by-products.

TRI-MARK TM-811N2

Alloy Digest ◽  
1983 ◽  
Vol 32 (4) ◽  
Keyword(s):  
Low Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steels ◽  
Nickel Steel ◽  
Fine Grained ◽  
Subzero Temperatures ◽  
Steel Weld Metal ◽  
Alloy Steels ◽  
Welding Electrode

Abstract TRI-MARK TM-811N2 is a flux-cored welding electrode for all position semiautomatic arc welding. It is designed to weld 2-3% nickel steels for applications requiring good toughness at subzero temperatures; in addition, it is used to weld various other high-strength low-alloy steels and various fine-grained steels with low-temperature toughness. Tri-Mark TM-811N2 is used to deposit typically 2.35% nickel steel weld metal with good low-temperature impact properties. It is used for shipbuilding, oil rigs and similar structures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-389. Producer or source: Tri-Mark Inc..

The effect of the molecular mass of the organic matter in raw water on the formation of disinfection by-products

2001 ◽  
Vol 50 (1) ◽  
pp. 39-45 ◽  
Author(s):  
Chen-Yu Chang ◽  
Yung-Hsu Hsieh ◽  
Yu-Min Lin ◽  
Po-Yu Hu ◽  
Chin-Chuan Liu ◽  
...  
Keyword(s):  
Organic Matter ◽  
Molecular Mass ◽  
Raw Water ◽  
By Products

Magnetite texture and trace-element geochemistry fingerprint of pulsed mineralization in the Xinqiao Cu-Fe-Au deposit, Eastern China

2020 ◽  
Vol 105 (11) ◽  
pp. 1712-1723
Author(s):  
Yu Zhang ◽  
Pete Hollings ◽  
Yongjun Shao ◽  
Dengfeng Li ◽  
Huayong Chen ◽  
...  
Keyword(s):  
Trace Element ◽  
Triple Junction ◽  
Eastern China ◽  
Black Shales ◽  
Hydrothermal Fluids ◽  
Oscillatory Zoning ◽  
Trace Element Geochemistry ◽  
Element Geochemistry ◽  
Rock Interaction ◽  
Multiple Pulses

Abstract The origin of stratabound deposits in the Middle-Lower Yangtze River Valley Metallogenic Belt (MLYRB), Eastern China, is the subject of considerable debate. The Xinqiao Cu-Fe-Au deposit in the Tongling ore district is a typical stratabound ore body characterized by multi-stage magnetite. A total of six generations of magnetite have been identified. Mt1 is commonly replaced by porous Mt2, and both are commonly trapped in the core of Mt3, which is characterized by both core-rim textures and oscillatory zoning. Porous Mt4 commonly truncates the oscillatory zoning of Mt3, and Mt5 is characterized by 120° triple junction texture. Mt1 to Mt5 are commonly replaced by pyrite that coexists with quartz, whereas Mt6, with a fine-grained foliated and needle-like texture, commonly cuts the early pyrite as veins and is replaced by pyrite that coexists with calcite. The geochemistry of the magnetite suggests that they are hydrothermal in origin. The microporosity of Mt2 and Mt4 magnetite, their sharp contacts with Mt1 and Mt3, and lower trace-element contents (e.g., Si, Ca, Mg, and Ti) than Mt1 and Mt3 suggest that they formed via coupled dissolution and reprecipitation of the precursor Mt1 and Mt3 magnetite, respectively. This was likely caused by high-salinity fluids derived from intensive water-rock interaction between the magmatic-hydrothermal fluids associated with the Jitou stock and Late Permian metalliferous black shales. The 120° triple junction texture of Mt5 suggests it is the result of fluid-assisted recrystallization, whereas Mt6 formed by replacement of hematite as a result of fracturing. The geochemistry of the magnetite suggests that the temperature increased from Mt2 to Mt3 and implies that there were multiple pulses of fluids from a magmatic-hydrothermal system. Therefore, we propose that the Xinqiao stratiform mineralization was genetically associated with multiple influxes of magmatic hydrothermal fluids derived from the Early Cretaceous Jitou stock. This study demonstrates that detailed texture examination and in situ trace-elements analysis under robust geological and petrographic frameworks can effectively constrain the mineralization processes and ore genesis.

scholarly journals The influences of sedimentary environments on organic matter enrichment in fine-grained rocks of the Paleogene Shahejie formation in Nanpu Sag, Huanghua Depression, Bohai Bay Basin

2021 ◽  
pp. 014459872110310
Author(s):  
Min Li ◽  
Xiongqi Pang ◽  
Guoyong Liu ◽  
Di Chen ◽  
Lingjian Meng ◽  
...  
Keyword(s):  
Organic Matter ◽  
Source Rocks ◽  
Bohai Bay ◽  
Bohai Bay Basin ◽  
Humid Climate ◽  
High Productivity ◽  
Fine Grained ◽  
Huanghua Depression ◽  
Shahejie Formation ◽  
Nanpu Sag

The fine-grained rocks in the Paleogene Shahejie Formation in Nanpu Sag, Huanghua Depression, Bohai Bay Basin, are extremely important source rocks. These Paleogene rocks are mainly subdivided into organic-rich black shale and gray mudstone. The average total organic carbon contents of the shale and mudstone are 11.5 wt.% and 8.4 wt.%, respectively. The average hydrocarbon (HC)-generating potentials (which is equal to the sum of free hydrocarbons (S1) and potential hydrocarbons (S2)) of the shale and mudstone are 39.3 mg HC/g rock and 28.5 mg HC/g rock, respectively, with mean vitrinite reflectance values of 0.82% and 0.81%, respectively. The higher abundance of organic matter in the shale than in the mudstone is due mainly to paleoenvironmental differences. The chemical index of alteration values and Na/Al ratios reveal a warm and humid climate during shale deposition and a cold and dry climate during mudstone deposition. The biologically derived Ba and Ba/Al ratios indicate high productivity in both the shale and mudstone, with relatively low productivity in the shale. The shale formed in fresh to brackish water, whereas the mudstone was deposited in fresh water, with the former having a higher salinity. Compared with the shale, the mudstone underwent higher detrital input, exhibiting higher Si/Al and Ti/Al ratios. Shale deposition was more dysoxic than mudstone deposition. The organic matter enrichment of the shale sediments was controlled mainly by reducing conditions followed by moderate-to-high productivity, which was promoted by a warm and humid climate and salinity stratification. The organic matter enrichment of the mudstone was less than that of the shale and was controlled by relatively oxic conditions.

Variations of organic matter transformation in response to hydrothermal fluids: Example from the Indiana part of the Illinois Basin

2020 ◽  
Vol 219 ◽  
pp. 103410 ◽  
Author(s):  
Juan Teng ◽  
Maria Mastalerz ◽  
Bei Liu ◽  
Timothy Gognat ◽  
Ernest Hauser ◽  
...  
Keyword(s):  
Organic Matter ◽  
Hydrothermal Fluids ◽  
Illinois Basin ◽  
Organic Matter Transformation

Removal of trihalomethanes from high organic matter water sources using aeration: a feasibility study

2020 ◽  
Vol 55 (2) ◽  
pp. 184-197
Author(s):  
Saeideh Mirzaei ◽  
Beata Gorczyca
Keyword(s):  
Organic Matter ◽  
Organic Carbon ◽  
Dissolved Organic Carbon ◽  
Feasibility Study ◽  
Distribution Systems ◽  
Water Age ◽  
Treated Water ◽  
Canadian Guideline ◽  
Viable Solution ◽  
By Products

Abstract In this study, diffused aeration was applied to remove trihalomethane (THM) compounds from chlorinated, treated water containing high dissolved organic carbon (DOC) of 6.8 ± 1.2 mg/L. Increasing air-to-water volumetric ratio (rA/W) from 16 to 39 enhanced total THM (TTHM) removal from 60 to 70% at 20 °C and from 30 to 50% at 4 °C. Although bromodichloromethane has lower Henry's law constant than chloroform (CF), it was removed by a higher degree than CF in some aeration trials. Albeit obtaining high removals in aeration, TTHM reformed, and their concentration surpassed the Canadian guideline of 100 ppb in about 24 hours at 20 °C and 40 hours at 10 °C in all attempted air-to-water ratios. The water age in the system investigated in this study varied from 48 hours in midpoint chlorine boosting stations to 336 hours in the nearest endpoint. This study showed that THM removal by aeration is not a viable solution to control the concentration of these disinfection by-products in high-DOC treated water and in distribution systems where water age exceeds 24 hours; unless, it is going to be installed at the distribution endpoints.

Sign in / Sign up

Export Citation Format

Share Document