scholarly journals Micro- and Nanotexture and Genesis of Ball Clays in the Lower Cretaceous (SE Iberian Range, NE Spain)

Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1339
Author(s):  
Blanca Bauluz ◽  
María José Mayayo ◽  
Elisa Laita ◽  
Alfonso Yuste
Keyword(s):  
Nanometer Scale ◽  
Iberian Range ◽  
Clay Deposits ◽  
Different Types ◽  
The Matrix ◽  
Ball Clay ◽  
Ball Clays ◽  
Mixed Layers ◽  
Ne Iberian Peninsula

Ball clay deposits in the SE of the Iberian Range (NE Iberian Peninsula) consist of Albian clays and siltstones with greyish and blackish colors, interbedded with subbituminous coals. The ball clays are nowadays mined for the manufacture of white color ceramics. The mineralogy of these deposits consists mainly of kaolinite, illitic phases, and quartz. The euhedral to sub-euhedral morphology of the kaolinites suggests their in-situ origin. The anhedral morphology of the illites and the presence of frayed illites suggest a detrital origin. At the micro-scale, authigenic kaolinite booklets are observed filling pores and forming mica/kaolinite intergrowths, in which the kaolinite grows between the cleavage sheets of pre-existing detrital mica. At nanometer scale, illite/smectite (IS) phases are detected forming interlayers with mica and kaolinite, and evidence of the replacement of mica by kaolinite is observed. The matrix consists of defective illite and kaolinite, and random mixed layers of kaolinite-I/S (Kln-IS), illite-I/S (Ilt-IS), and I/S-smectite (IS-S). The textures of illite and the presence of different types of mixed layers suggest that the expandable phases and kaolinite are products of mica alteration. The effectivity of the alteration was probably a consequence of the low pH that occurred in the environment due to the presence of abundant organic- and acidic- rich fluids.

Genesis of kaolinite from Albian sedimentary deposits of the Iberian Range (NE Spain): analysis by XRD, SEM and TEM

Clay Minerals ◽  
2008 ◽  
Vol 43 (3) ◽  
pp. 459-475 ◽  
Author(s):  
B. Bauluz ◽  
M. J. Mayayo ◽  
A. Yuste ◽  
J. M. González López
Keyword(s):  
Source Area ◽  
Weathering Processes ◽  
Sedimentary Deposits ◽  
Iberian Range ◽  
Different Types ◽  
The Matrix ◽  
High Degree ◽  
Feldspar Dissolution ◽  
Ne Spain

AbstractThe kaolinite from Albian sedimentary deposits (Escucha and Utrillas Formations) of the Iberian Range (Spain) have been investigated. This research has shown the presence of different types of kaolinites (detrital and diagenetic) along with micaceous phases in these deposits. Detrital kaolinites show anhedral morphology, low crystallinity and a degree of ordering as well as the presence of interstratified smectite layers. They constitute the matrix of the claystones and siltstones and were probably formed as a consequence of intense weathering processes in the source area during the warm period of the early Cretaceous. Diagenetic kaolinites have been recognized in the sandstones and siltstones, with kaolinite growing between ‘expanded’ mica flakes and vermiform and euhedral kaolinite forming the matrix. They have euhedral morphologies, high crystallinity and a high degree of ordering. They grewin situas a response to incipient diagenesis by K-feldspar dissolution and/or organic acid-rich fluids derived from the maturation of organic matter in shales.

In Situ Fabrication and Microstucture of ZrB2 Particles Reinforced Aluminum Matrix Composites

2012 ◽  
Vol 476-478 ◽  
pp. 122-125 ◽  
Author(s):  
Zhu Rui ◽  
Yu Tao Zhao ◽  
Song Li Zhang ◽  
Zhi Hong Jia
Keyword(s):  
Aluminum Matrix ◽  
Tensile Tests ◽  
Aluminum Matrix Composites ◽  
Nanometer Scale ◽  
Matrix Composites ◽  
Reaction Method ◽  
The Matrix

Abstract：Aluminum matrx composites reinforced by in situ ZrB2 particles are fabricated from A356-AlB-K2ZrF6 system via in-situ melt reaction method, and the morphologies, sizes and distributions of the in situ particles as well as the microstructures, mechanical mechanisms of the composites are investigated by XRD,SEM,TEM and tensile tests. The results indicate that the morphologies of the in situ particles are mainly with ball-shape, the sizes are in nanometer scale and the distributions in the matrix are uniform. The interfaces between the in situ particles and the aluminum matrix are net and no interfacial outgrowth is observed.

scholarly journals The constitution, evaluation and ceramic properties of ball clays

Cerâmica ◽  
1998 ◽  
Vol 44 (287-288) ◽  
pp. 88-117 ◽  
Author(s):  
Ian Richard Wilson
Keyword(s):  
United States ◽  
Czech Republic ◽  
The United States ◽  
Fine Grained ◽  
Clay Deposits ◽  
The World ◽  
Ball Clay ◽  
Ball Clays ◽  
White Colour

Ball clay is a fine-grained highly plastic, mainly kaolinitic, sedimentary clay, the higher grades of which fire to a white or near white colour. The paper will review the origin of the term "Ball Clay" and the location and origins of several deposits with particular emphasis on the mineralogical, physical and rheological properties which make the clays so important in ceramics bodies. Particular attention will be paid to the well known bay clay deposits of Devon and Dorset in southwest England, which are mined by ECC International Europe and Watts Blake Bearne & Company PLC, and brief descriptions from elsewhere in the world of ball clays from the United States, Germany, Czech Republic, Thailand, Indonesia, Argentina and China. The evaluation of deposits will be covered along with a description of the main types of ball clay for ceramics with details of the mining, processing and blending techniques which are necessary to ensure long term consistency of products. A brief description in given of the ceramic properties of some Brazilian ball clays. The location of some ball clay deposits is shown in Fig. 1.

Pb Electrodeposition in the Presence of Chlorine Ions on Cu(100): An in Situ Optical Reflectivity Difference Study

2003 ◽  
Vol 781 ◽  
Author(s):  
J. Gray ◽  
W. Schwarzacher ◽  
X.D. Zhu
Keyword(s):  
Oblique Incidence ◽  
Opposite Sign ◽  
Bulk Phase ◽  
Phase Layer ◽  
Optical Reflectivity ◽  
Scan Rate ◽  
Different Types ◽  
Chlorine Ions ◽  
High Overpotentials

AbstractWe studied the initial stages of the electrodeposition of Pb in the presence of chlorine ions on Cu(100), using an oblique-incidence optical reflectivity difference (OIRD) technique. The OI-RD results reveal that immediately following the underpotential deposition (UPD) of the first Pb monolayer, two different types of bulk-phase films grow depending upon the magnitude of overpotential and cyclic voltammetry (CV) scan rate. At low overpotentials and/or slow scan rates, we propose that a bulk-phase Pb film grows on top of the UPD monolayer. At high overpotentials and/or fast scan rates, either a PbO, PbCl2, or a rough Pb bulk-phase layer grows on top of the UPD layer such that the reflectivity difference signal from such a film has an opposite sign.

scholarly journals Supramolecular ionic polymer/carbon nanotube composite hydrogels with enhanced electromechanical performance

2020 ◽  
Vol 9 (1) ◽  
pp. 478-488 ◽  
Author(s):  
Yun-Fei Zhang ◽  
Fei-Peng Du ◽  
Ling Chen ◽  
Ka-Wai Yeung ◽  
Yuqing Dong ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Ion Mobility ◽  
Artificial Muscles ◽  
Ionic Polymer ◽  
Composite Hydrogels ◽  
The Matrix ◽  
Electromechanical Performance ◽  
Carbon Nanotube Composite ◽  
Robotic Devices

AbstractElectroactive hydrogels have received increasing attention due to the possibility of being used in biomimetics, such as for soft robotics and artificial muscles. However, the applications are hindered by the poor mechanical properties and slow response time. To address these issues, in this study, supramolecular ionic polymer–carbon nanotube (SIPC) composite hydrogels were fabricated via in situ free radical polymerization. The polymer matrix consisted of carbon nanotubes (CNTs), styrene sulfonic sodium (SSNa), β-cyclodextrin (β-CD)-grafted acrylamide, and ferrocene (Fc)-grafted acrylamide, with the incorporation of SSNa serving as the ionic source. On applying an external voltage, the ions accumulate on one side of the matrix, leading to localized swelling and bending of the structure. Therefore, a controllable and reversible actuation can be achieved by changing the applied voltage. The tensile strength of the SIPC was improved by over 300%, from 12 to 49 kPa, due to the reinforcement effect of the CNTs and the supramolecular host–guest interactions between the β-CD and Fc moieties. The inclusion of CNTs not only improved the tensile properties but also enhanced the ion mobility, which lead to a faster electromechanical response. The presented electro-responsive composite hydrogel shows a high potential for the development of robotic devices and soft smart components for sensing and actuating applications.

scholarly journals In situ structure and organization of the influenza C virus surface glycoprotein

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Steinar Halldorsson ◽  
Kasim Sader ◽  
Jack Turner ◽  
Lesley J. Calder ◽  
Peter B. Rosenthal
Keyword(s):  
Membrane Fusion ◽  
Hexagonal Lattice ◽  
Surface Glycoprotein ◽  
Structural Basis ◽  
Virus Surface ◽  
The Matrix ◽  
Influenza C Virus ◽  
Subtomogram Averaging ◽  
Electron Cryotomography

AbstractThe lipid-enveloped influenza C virus contains a single surface glycoprotein, the haemagglutinin-esterase-fusion (HEF) protein, that mediates receptor binding, receptor destruction, and membrane fusion at the low pH of the endosome. Here we apply electron cryotomography and subtomogram averaging to describe the structural basis for hexagonal lattice formation by HEF on the viral surface. The conformation of the glycoprotein in situ is distinct from the structure of the isolated trimeric ectodomain, showing that a splaying of the membrane distal domains is required to mediate contacts that form the lattice. The splaying of these domains is also coupled to changes in the structure of the stem region which is involved in membrane fusion, thereby linking HEF’s membrane fusion conformation with its assembly on the virus surface. The glycoprotein lattice can form independent of other virion components but we show a major role for the matrix layer in particle formation.

scholarly journals Selected In Situ Hybridization Methods: Principles and Application

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3874
Author(s):  
Dominika Veselinyová ◽  
Jana Mašlanková ◽  
Katarina Kalinová ◽  
Helena Mičková ◽  
Mária Mareková ◽  
...  
Keyword(s):  
In Situ Hybridization ◽  
Imaging Techniques ◽  
Cell Communication ◽  
Probe Design ◽  
Rapid Progress ◽  
In Situ Techniques ◽  
Different Types ◽  
Laboratory Procedures ◽  
The Individual

We are experiencing rapid progress in all types of imaging techniques used in the detection of various numbers and types of mutation. In situ hybridization (ISH) is the primary technique for the discovery of mutation agents, which are presented in a variety of cells. The ability of DNA to complementary bind is one of the main principles in every method used in ISH. From the first use of in situ techniques, scientists paid attention to the improvement of the probe design and detection, to enhance the fluorescent signal intensity and inhibition of cross-hybrid presence. This article discusses the individual types and modifications, and is focused on explaining the principles and limitations of ISH division on different types of probes. The article describes a design of probes for individual types of in situ hybridization (ISH), as well as the gradual combination of several laboratory procedures to achieve the highest possible sensitivity and to prevent undesirable events accompanying hybridization. The article also informs about applications of the methodology, in practice and in research, to detect cell to cell communication and principles of gene silencing, process of oncogenesis, and many other unknown processes taking place in organisms at the DNA/RNA level.

scholarly journals The Sorting of Mitochondrial DNA and Mitochondrial Proteins in Zygotes: Preferential Transmission of Mitochondrial DNA to the Medial Bud

1998 ◽  
Vol 142 (3) ◽  
pp. 613-623 ◽  
Author(s):  
Koji Okamoto ◽  
Philip S. Perlman ◽  
Ronald A. Butow
Keyword(s):  
Mitochondrial Dna ◽  
Fluorescent Protein ◽  
Yeast Cells ◽  
Mitochondrial Matrix ◽  
Outer Membranes ◽  
Marker Proteins ◽  
The Matrix ◽  
Green Fluorescent ◽  
Mitochondrial Reticulum

Green fluorescent protein (GFP) was used to tag proteins of the mitochondrial matrix, inner, and outer membranes to examine their sorting patterns relative to mtDNA in zygotes of synchronously mated yeast cells in ρ+ × ρ0 crosses. When transiently expressed in one of the haploid parents, each of the marker proteins distributes throughout the fused mitochondrial reticulum of the zygote before equilibration of mtDNA, although the membrane markers equilibrate slower than the matrix marker. A GFP-tagged form of Abf2p, a mtDNA binding protein required for faithful transmission of ρ+ mtDNA in vegetatively growing cells, colocalizes with mtDNA in situ. In zygotes of a ρ+ × ρ+ cross, in which there is little mixing of parental mtDNAs, Abf2p–GFP prelabeled in one parent rapidly equilibrates to most or all of the mtDNA, showing that the mtDNA compartment is accessible to exchange of proteins. In ρ+ × ρ0 crosses, mtDNA is preferentially transmitted to the medial diploid bud, whereas mitochondrial GFP marker proteins distribute throughout the zygote and the bud. In zygotes lacking Abf2p, mtDNA sorting is delayed and preferential sorting is reduced. These findings argue for the existence of a segregation apparatus that directs mtDNA to the emerging bud.

The contribution of friction stress to the creep behaviour of the nickel-base in situ composite, γ—γ'-Cr 3 C 2

1980 ◽  
Vol 373 (1752) ◽  
pp. 93-109 ◽  
Keyword(s):  
Activation Energy ◽  
Creep Behaviour ◽  
Friction Stress ◽  
Matrix Alloy ◽  
Dislocation Motion ◽  
Self Diffusion ◽  
The Matrix ◽  
Nickel Base ◽  
Distribution Of Stress

Transient creep following stress reductions has been analysed by the method described by McLean (1980) to determine the friction stress σ 0 as a function of temperature and directional solidification conditions for the γ-γ'-Cr 3 Cr 2 in-situ composite and for the γ-γ' matrix alloy. These values of σ 0 are identical to the flow stresses at creep strain rates and can be identified with the sums of the barriers to dislocation motion through the matrix by climb around γ'-particles and Orowan bowing between the carbide fibres. The friction stress and the kinetics of deformation of the composite are determined by the matrix behaviour, whereas its creep strength depends on the distribution of stress between fibre and matrix. When the steady-state creep behaviour of γ-γ'-Cr 3 C 2 is analysed by using the usual power law description in terms of the effective stress σ — σ 0 , rather than the applied stress σ, the stress exponent is ca 4 and the activation energy is similar to the activation energy of self-diffusion for nickel. The results provide strong evidence for the operation of recovery-creep in both the composite and matrix alloys.

Sign in / Sign up

Export Citation Format

Share Document