scholarly journals Effect of Lattice Substitution on Adsorption of Hexavalent Chromium by Montmorillonite, Nontronite, and Beidellite

Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1407
Author(s):  
Weige Luo ◽  
Zheng Zeng
Keyword(s):  
Adsorption Capacity ◽  
Clay Minerals ◽  
Hexavalent Chromium ◽  
Density Functional ◽  
Valence Electron ◽  
Key Populations ◽  
Adsorption System ◽  
Functional Theory ◽  
Calculation Results ◽  
Chromium Adsorption

This work aims to evaluate the effect of lattice substitution on adsorption of hexavalent chromium by three kinds of typical clay minerals, and its common isomorph via experiments and calculations were performed based on density functional theory. The experiments (25 °C, 4 h, pH = 4 and without stirring) confirmed an order of adsorption capacity as follows: Montmorillonite (12 mg/g) > Nontronite (9 mg/g) > Beidellite (8 mg/g). Accordingly, the Mulliken populations, density of states, and band structures of the mineral models with the structural Al, Mg, Fe(II), Fe(III), and Al (in tetrahedrons) on behalf of five species of isomorph were calculated. The calculation results explain the differences between hexavalent chromium adsorption capacity of five kinds of isomorph by means of atom, key populations, overlapping valence electron orbitals, and the variation of energy band. However, no overlapping orbitals were observed in the adsorption system with structural Mg. It is implied that the structural Mg has little influence of hexavalent chromium adsorption. In conclusion, our study contributes to achieving a better understanding of modified clay minerals materials applications.

On the Linear Geometry of Lanthanide Hydroxide (Ln—OH, Ln=La-Lu)

2019 ◽  
Author(s):  
Hassan Harb ◽  
Lee Thompson ◽  
Hrant Hratchian
Keyword(s):  
Triple Bond ◽  
Density Functional ◽  
Valence Electron ◽  
Density Functional Theory Calculations ◽  
Electron Configuration ◽  
Functional Theory ◽  
Key Species ◽  
Pi Orbitals ◽  
Lanthanide Hydroxide ◽  
Linear Geometry

Lanthanide hydroxides are key species in a variety of catalytic processes and in the preparation of corresponding oxides. This work explores the fundamental structure and bonding of the simplest lanthanide hydroxide, LnOH (Ln=La-Lu), using density functional theory calculations. Interestingly, the calculations predict that all structures of this series will be linear. Furthermore, these results indicate a valence electron configuration featuring an occupied sigma orbital and two occupied pi orbitals for all LnOH compounds, suggesting that the lanthanide-hydroxide bond is best characterized as a covalent triple bond.

On the Linear Geometry of Lanthanide Hydroxide (Ln—OH, Ln=La-Lu)

2019 ◽  
Author(s):  
Hassan Harb ◽  
Lee Thompson ◽  
Hrant Hratchian
Keyword(s):  
Triple Bond ◽  
Density Functional ◽  
Valence Electron ◽  
Density Functional Theory Calculations ◽  
Electron Configuration ◽  
Functional Theory ◽  
Key Species ◽  
Pi Orbitals ◽  
Lanthanide Hydroxide ◽  
Linear Geometry

Lanthanide hydroxides are key species in a variety of catalytic processes and in the preparation of corresponding oxides. This work explores the fundamental structure and bonding of the simplest lanthanide hydroxide, LnOH (Ln=La-Lu), using density functional theory calculations. Interestingly, the calculations predict that all structures of this series will be linear. Furthermore, these results indicate a valence electron configuration featuring an occupied sigma orbital and two occupied pi orbitals for all LnOH compounds, suggesting that the lanthanide-hydroxide bond is best characterized as a covalent triple bond.

scholarly journals Study on the adsorption selection of CH$$_4$$ on CuO (110) versus (111) surfaces: a density functional theory study

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Long Lin ◽  
Linwei Yao ◽  
Shaofei Li ◽  
Zhengguang Shi ◽  
Kun Xie ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Adsorption Capacity ◽  
Active Sites ◽  
Density Functional ◽  
Oxygen Vacancies ◽  
Density Functional Theory Calculations ◽  
Density Functional Theory Study ◽  
Functional Theory ◽  
Strong Adsorption ◽  
Selection Of

AbstractFinding the active sites of suitable metal oxides is a key prerequisite for detecting CH$$_4$$ 4 . The purpose of the paper is to investigate the adsorption of CH$$_4$$ 4 on intrinsic and oxygen-vacancies CuO (111) and (110) surfaces using density functional theory calculations. The results show that CH$$_4$$ 4 has a strong adsorption energy of −0.370 to 0.391 eV at all site on the CuO (110) surface. The adsorption capacity of CH$$_4$$ 4 on CuO (111) surface is weak, ranging from −0.156 to −0.325 eV. In the surface containing oxygen vacancies, the adsorption capacity of CuO surface to CH$$_4$$ 4 is significantly stronger than that of intrinsic CuO surface. The results indicate that CuO (110) has strong adsorption and charge transfer capacity for CH$$_4$$ 4 , which may provide experimental guidance.

scholarly journals Comparative Study on Electronic Structure and Optical Properties of α-Fe2O3, Ag/α-Fe2O3 and S/α-Fe2O3

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 424
Author(s):  
Cuihua Zhao ◽  
Baishi Li ◽  
Xi Zhou ◽  
Jianhua Chen ◽  
Hongqun Tang
Keyword(s):  
Optical Properties ◽  
Optical Absorption ◽  
Electronic Structures ◽  
Density Functional ◽  
Peak Strength ◽  
Visible Range ◽  
High Symmetry ◽  
Functional Theory ◽  
Optical Absorption Peak ◽  
Calculation Results

The electronic structures and optical properties of pure, Ag-doped and S-doped α-Fe2O3 were studied using density functional theory (DFT). The calculation results show that the structure of α-Fe2O3 crystal changes after Ag and S doping, which leads to the different points of the high symmetry of Ag-doped and S-doped α-Fe2O3 with that of pure α-Fe2O3 in the energy band, as well as different Brillouin paths. In addition, the band gap of α-Fe2O3 becomes smaller after Ag and S doping, and the optical absorption peak shifts slightly toward the short wavelength, with the increased peak strength of S/α-Fe2O3 and the decreased peak strength of Ag/α-Fe2O3. However, the optical absorption in the visible range is enhanced after Ag and S doping compared with that of pure α-Fe2O3 when the wavelength is greater than 380 nm, and the optical absorption of S-doped α-Fe2O3 is stronger than that of Ag-doped α-Fe2O3.

Research Optical Characteristics of H2S Molecule Adsorption on Agn (n=2,4,6) Clusters

2013 ◽  
Vol 321-324 ◽  
pp. 499-502
Author(s):  
Hong Zhou ◽  
Jun Feng Wang ◽  
Jun Qing Wen ◽  
Wei Bin Cheng ◽  
Jun Fei Wang
Keyword(s):  
Density Functional Theory ◽  
Infrared Spectrum ◽  
Density Functional ◽  
Global Minimum ◽  
Electronic States ◽  
Binding Energies ◽  
Optical Characteristics ◽  
Functional Theory ◽  
Calculation Results ◽  
Planar Geometries

Density-functional theory has been used to calculate the energetically global-minimum geometries and electronic states of AgnH2S (n=2, 4, 6) clusters. The lowest-energy structures of Ag2, Ag4, Ag6, Ag2H2S, Ag4H2S and Ag6H2S clusters were obtained, respectively. The calculation results show that the lowest-energy structures of Ag2, Ag4and Ag6clusters are planar geometries. The binding energies of Agn(n=2, 4, 6) clusters are gradually increasing in our calculations. Compare the infrared spectrum peaks of Ag4cluster with that of Ag6cluster, which show that the peaks shift to shortwave. After adsorption, we found that the peaks shift to shortwave by comparison.

scholarly journals Effect of Point Defects on Electronic Properties and Structure of Talc (001) Surface by First Principles

Minerals ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 69
Author(s):  
Xindi Ma ◽  
Huicong Du ◽  
Ping Lan ◽  
Jianhua Chen ◽  
Lihong Lan
Keyword(s):  
Electronic Properties ◽  
Density Functional ◽  
Surface States ◽  
State Density ◽  
Functional Theory ◽  
Vacancy Defects ◽  
Impurity Atoms ◽  
Electron State Density ◽  
Calculation Results ◽  
Impurity Defects

The surface structure and electronic properties of Mg vacancy defects on talc (001) and impurity defects with Fe, Mn, Ni, Al, and Ca replacing Mg atoms were calculated by using density functional theory. The calculation results show that the order of impurity substitution energy is Mn < Ni < Al < Ca < Fe. This indicates that Fe impurity defects are most easily formed in talc crystals. The covalent bonding between Si atoms and reactive oxygen atoms adjacent to impurity atoms is weakened and the ionic property is enhanced. The addition of Fe, Mn, and Ni atoms makes the surface of talc change from an insulator to a semiconductor and enhances its electrical conductivity. The analysis of electron state density shows that surface states composed of impurity atoms 4S orbital appear near the Fermi level.

Theoretical Research on Structure and Infrared Spectra of the 9-Methacrylate Carbazole Molecule

2022 ◽  
Vol 905 ◽  
pp. 117-121
Author(s):  
Hui Li ◽  
Bing Guo ◽  
Kun Wang ◽  
Ming Yu Zhou
Keyword(s):  
Infrared Spectrum ◽  
Density Functional ◽  
Spatial Configuration ◽  
Density Functional Theory Method ◽  
Peak Position ◽  
Theoretical Research ◽  
Imaginary Frequency ◽  
Functional Theory ◽  
Calculation Results ◽  
Base Group

Using the quantum chemical density functional theory method in the Gaussian03W package, the spatial configuration of this compound is optimized by using B3LYP/6-31G(d) as the base group, in which the data of bond length, bond angle and spatial dihedral angle of the compound molecule are obtained. Based on the optimized stable structure, the infrared vibration frequency of the molecule is calculated, and the infrared spectrum is drawn. There is no imaginary frequency in the calculation results of frequency value, which indicates that the optimized configuration of 9-methacryloyl carbazole molecule is reasonable, and the peak position of infrared spectrum is assigned.

scholarly journals First-Principles Determination of the Polarizabilities of Carbon Tubules as a Function of Length

1994 ◽  
Vol 349 ◽  
Author(s):  
Andrew A. Quong ◽  
Mark R. Pederson
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Valence Electron ◽  
Local Density ◽  
Density Approximation ◽  
Functional Theory ◽  
Size Dependent ◽  
The Density Functional Theory ◽  
Linear And Nonlinear

ABSTRACTWe use the local-density-approximation to the density-functional theory to determine the axial polarizabilities of fullerene tubules as a function of length and winding topologies. Specifically, we present linear polarizabilities for tubules of composition C12H24, C36H24, C40H20 and C60H24. The size-dependent variation in the dipole-coupled gaps between pairs of occupied and unoccupied levels leads to enhancements in the polarizability per valence electron as the length of the tubule increases. The results are compared to recent densityfunctional based calculations of the linear and nonlinear polarizabilities for fullerene and benzene molecules.

Bisoxazoline–copper(I)-catalyzed aziridination of diazoacetate with imines — A DFT study

2010 ◽  
Vol 88 (10) ◽  
pp. 981-990 ◽  
Author(s):  
Qingxi Meng ◽  
Fen Wang ◽  
Ming Li
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Mode I ◽  
Mode Ii ◽  
Free Energies ◽  
Functional Theory ◽  
Carboxylate Complex ◽  
Calculation Results ◽  
Favorable Reaction ◽  
Level Calculation

Density functional theory (DFT) has been used to study bisoxazoline–copper(I)-catalyzed aziridination of diazoacetate with syn-imines or anti-imines. All the intermediates and transition states were optimized completely at the B3LYP/6-31G(d) level. Calculation results confirm that Cu(I)-catalyzed aziridination goes mainly through the catalyst–diazoacetate complex (M1), the copper(I)–carbene intermediate (M2), the copper–carbene–imine complex (M3), and the catalyst–aziridine carboxylate complex (M4). For syn-imines, the reaction mode I (C3–N5 bond attacking the Cu–C1 bond of M2) is more dominant than the reaction mode II (C3–N5 bond attacking the carbene–carbon C1 of M2), and the attack from the si-surface of M2 is prior to the re-surface. For anti-imines, the reaction modes and attacks from the si- or re-surface coexist. The reactivity of syn-imines is stronger than anti-imines. The favorable reaction channel is CA2 → M1b → TS1b → M2 → syn-TS2b → syn-M3b → syn-TS3b → syn-M4b → syn-P2. The dominant product theoretically predicted is of (S,S)-chirality. On the whole, the solvent effect decreases the free energies of the species.

Sign in / Sign up

Export Citation Format

Share Document