scholarly journals Synthesis of Cyanate Esters Based on Mono-O-Methylated Bisphenols with Sulfur-Containing Bridges

Molecules ◽  
2019 ◽  
Vol 24 (1) ◽  
pp. 177
Author(s):  
Andrey Galukhin ◽  
Roman Nosov
Keyword(s):  
Mass Spectrometry ◽  
Differential Scanning Calorimetry ◽  
Maldi Mass Spectrometry ◽  
Phenolic Hydroxyl ◽  
Synthetic Approach ◽  
Reaction Enthalpy ◽  
Scanning Calorimetry ◽  
Cyanate Esters ◽  
Temperature Range ◽  
Sulfur Containing

We described a synthetic approach to bisphenol-based monocyanate esters based on mono-O-methylation of parental bisphenols followed by cyanation of the residual phenolic hydroxyl. Structures of the synthesized compounds were determined by the application of IR, NMR 1H and 13C spectroscopies, EI and MALDI mass spectrometry, and purity of the final product was controlled by HPLC. We showed that stability of the cyanate esters depends on the nature of the bridging group. Temperature range of thermally initiated cyclotrimerization of synthesized monocyanate ester, as well as reaction enthalpy, was determined by differential scanning calorimetry (DSC).

Probing of the combined effect of bisquaternary ammonium antimicrobial agents and acetylsalicylic acid on model phospholipid membranes: differential scanning calorimetry and mass spectrometry studies

2014 ◽  
Vol 10 (12) ◽  
pp. 3155-3162 ◽  
Author(s):  
N. A. Kasian ◽  
V. A. Pashynska ◽  
O. V. Vashchenko ◽  
A. O. Krasnikova ◽  
A. Gömöry ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Differential Scanning Calorimetry ◽  
Acetylsalicylic Acid ◽  
Antimicrobial Agents ◽  
Combined Effect ◽  
Phospholipid Membranes ◽  
Scanning Calorimetry ◽  
Combined Use ◽  
The Individual

Qualitatively different membranotropic effects of the individual drugs and complexes formed in their combined use were demonstrated by differential scanning calorimetry.

Specific heats of polymer powders by differential scanning calorimetry

1982 ◽  
Vol 60 (14) ◽  
pp. 1853-1856 ◽  
Author(s):  
Eva I. Vargha-Butler ◽  
A. Wilhelm Neumann ◽  
Hassan A. Hamza
Keyword(s):  
Differential Scanning Calorimetry ◽  
Specific Heat ◽  
Scanning Calorimetry ◽  
Temperature Range ◽  
Specific Heats ◽  
Powdered Form ◽  
Polymer Powders

The specific heats of five polymers were determined by differential scanning calorimetry (DSC) in the temperature range of 300 to 360 K. The measurements were performed with polymers in the form of films, powders, and granules to clarify whether or not DSC specific heat values are dependent on the diminution of the sample. It was found that the specific heats for the bulk and powdered form of the polymer samples are indistinguishable within the error limits, justifying the determination of specific heats of powders by means of DSC.

scholarly journals Synthesis, Mesomorphism and the Optical Properties of Alkyl-deuterated Nematogenic 4-[(2,6-difluorophenyl)ethynyl]biphenyls

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4653
Author(s):  
Jakub Herman ◽  
Piotr Harmata ◽  
Michał Czerwiński ◽  
Olga Strzeżysz ◽  
Marta Pytlarczyk ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Mass Spectrometry ◽  
Differential Scanning Calorimetry ◽  
Optical Properties ◽  
Liquid Crystalline ◽  
Near Infrared ◽  
Synthesis And Characterization ◽  
Molecular Approach ◽  
Scanning Calorimetry

The synthesis and characterization of new deuterated liquid crystal (LC) compounds based on phenyl tolane core is described in this paper. The work presents an alternative molecular approach to the conventional LC design. Correlations between molecular structure and mesomorphic and optical properties for compounds which are alkyl-hydrogen terminated and alkyl-deuterium, have been drawn. The compounds are characterized by mass spectrometry (electron ionization) analysis and infrared spectroscopy. They show enantiotropic nematic behavior in a broad temperature range, confirmed by a polarizing thermomicroscopy and differential scanning calorimetry. Detailed synthetic procedures are attached. Synthesized compounds show a significantly reduced absorption in the near-infrared (NIR) and medium-wavelength infrared (MWIR) radiation range, and stand as promising components of medium to highly birefringent liquid crystalline mixtures.

scholarly journals Conversion of palm oil to new sulfur-based polymer by inverse vulcanization

2021 ◽  
Vol 287 ◽  
pp. 02014
Author(s):  
Amin Abbasi ◽  
Mohamed Mahmoud Nasef ◽  
Wan Zaireen Nisa Yahya ◽  
Muhammad Moniruzzaman
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Fourier Transform ◽  
Thermogravimetric Analysis ◽  
Palm Oil ◽  
Elemental Sulfur ◽  
Molten State ◽  
Scanning Calorimetry ◽  
Environmental Friendly ◽  
Sulfur Containing

The conversion of palm oil into a sulfur-based polymer by copolymerization with sulfur powder at its molten state is herein reported. The obtained sulfur-containing polymer was characterized using Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) to demonstrate the successful conversion. The disappearance of the peaks related to vinylic groups of oil together with the appearance of a peak representing C-H rocking vibrations in the vicinity of C-S bonds confirmed the copolymerization of sulfur with oil. TGA revealed that the polymers have thermal stability up to 230°C under nitrogen and the polymers leave 10% sulfur-rich ash. DSC proved that a small amount of elemental sulfur remained unreacted in the polymer, which showed amorphous and heavily crosslinked structure resembling thermosets. These copolymers are an environmental-friendly polymeric material promoting the utilization of the abundant sulfur while also adding value to palm oil.

Synthesis, characterization, and structures of zircona- and boracyclosiloxanes with ferrocenyl substituents

2002 ◽  
Vol 80 (11) ◽  
pp. 1469-1480 ◽  
Author(s):  
Karena Thieme ◽  
Sara C Bourke ◽  
Juan Zheng ◽  
Mark J MacLachlan ◽  
Fojan Zamanian ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Ring Opening ◽  
Ring Opening Polymerization ◽  
The Novel ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Multinuclear Nmr Spectroscopy

The novel zirconatetraferrocenylcyclotrisiloxane Cp2Zr(OSiFc2)2O (6), dizirconatetraferrocenylcyclotetrasiloxane [Cp2Zr(OSiFc2)O]2 (7), boratetraferrocenylcyclotrisiloxane (C6H5)B(OSiFc2)2O (8), and diboratetraferrocenylcyclotetrasiloxane [(C6H5)B(OSiFc2)O]2 (9) with ferrocenyl (Fc = Fe(η-C5H4)(η-C5H5)) substituents at silicon have been prepared from the reactions of Cp2Zr(NMe2)2 and PhBCl2 with diferrocenylsilanediol Fc2Si(OH)2 (3) and tetraferrocenyldisiloxanediol [Fc2SiOH]2O (5). The compounds were characterized by mass spectrometry, elemental analysis, UV–vis, IR, Raman, and multinuclear NMR spectroscopy, as well as single crystal X-ray diffraction. Thermogravimetric analysis and differential scanning calorimetry investigation of 6–9 showed that the cycles decompose before they can undergo any thermal ring-opening polymerization. In addition, no polymerization was detected in the presence of either KOSiMe3 or HOTf. The bulky ferrocenyl substituents on the Si atoms are likely to be at least partially responsible for the inability of these heterocycles to undergo ring-opening polymerization. Key words: heterocyclosiloxanes, ferrocenyl.

Recyclable amitraz-ethylene vinyl acetate strips used for beehives treatment against Varroa destructor

2017 ◽  
Vol 50 (5) ◽  
pp. 391-402 ◽  
Author(s):  
Federico Karp ◽  
Julio A Luna ◽  
Luciano N Mengatto
Keyword(s):  
Mass Spectrometry ◽  
Differential Scanning Calorimetry ◽  
Vinyl Acetate ◽  
Varroa Destructor ◽  
Ethylene Vinyl Acetate ◽  
Gas Chromatography Mass Spectrometry ◽  
Recycling Process ◽  
Scanning Calorimetry ◽  
The World ◽  
Natural Pollination

In this work, a new recyclable ethylene-vinyl acetate (EVA)-based strip impregnated with amitraz (AMZ) was prepared, characterized, and evaluated for the treatment of Apis mellifera against Varroa destructor. Bees are important for natural pollination, honey, and related goods production. Varroa destructor is currently considered one of the major pests and important efforts around the world are focused on methods for varroasis treatment. The procedure of strips preparation presented in this work consisted of two steps: impregnation and molding of impregnated pellets. Differential scanning calorimetry and gas chromatography–mass spectrometry analyses confirmed that AMZ molecule resisted the impregnation and molding conditions. The strips were sufficiently strong to resist destruction by the bees. The final infestation was lower in the hives treated with AMZ/EVA strips than in those treated with commercial strips. In order to check the possibility of recycling, strips were cut into little pieces and were subjected to total AMZ extraction. Finally, the fragments were exposed to re-impregnation and molding. The strips prepared after the recycling process presented the same shape and AMZ load than fresh strips.

scholarly journals Synthesis and characterization of solid 2-methoxycinnamylidenepyruvic acid

2008 ◽  
Vol 33 (4) ◽  
pp. 61-68 ◽  
Author(s):  
C. T. de Carvalho ◽  
A. B. Siqueira ◽  
E. Y. Ionashiro ◽  
M. Pivatto ◽  
M. Ionashiro
Keyword(s):  
Mass Spectrometry ◽  
Nuclear Magnetic Resonance ◽  
Differential Scanning Calorimetry ◽  
Infrared Spectroscopy ◽  
Magnetic Resonance ◽  
Molecular Geometry ◽  
Synthesis And Characterization ◽  
Scanning Calorimetry ◽  
Purity Determination

The 2-methoxycinnamylidenepyruvic acid (2-MeO-HCP) was synthesized and characterized for nuclear magnetic resonance (¹H and 13C NMR), mass spectrometry (MS), Infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The application of DSC for purity determination is well documented in literature and is used in the analysis of pure organic compounds. The molecular geometry and vibrational frequencies of 2-MeO-HCP have been calculated.

Sign in / Sign up

Export Citation Format

Share Document