scholarly journals Solubility, Permeability, Anti-Inflammatory Action and In Vivo Pharmacokinetic Properties of Several Mechanochemically Obtained Pharmaceutical Solid Dispersions of Nimesulide

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1513
Author(s):  
Wei Wei ◽  
Veronica I. Evseenko ◽  
Mikhail V. Khvostov ◽  
Sergey A. Borisov ◽  
Tatyana G. Tolstikova ◽  
...  
Keyword(s):  
Solid Dispersions ◽  
Nmr Relaxation ◽  
Aqueous Solubility ◽  
Disodium Salt ◽  
Artificial Membrane ◽  
Scanning Calorimetry ◽  
Relaxation Methods ◽  
Pharmacokinetic Properties ◽  
Anti Inflammatory

Nimesulide (NIM, N-(4-nitro-2-phenoxyphenyl)methanesulfonamide) is a relatively new nonsteroidal anti-inflammatory analgesic drug. It is practically insoluble in water (<0.02 mg/mL). This very poor aqueous solubility of the drug may lead to low bioavailability. The objective of the present study was to investigate the possibility of improving the solubility and the bioavailability of NIM via complexation with polysaccharide arabinogalactan (AG), disodium salt of glycyrrhizic acid (Na2GA), hydroxypropyl-β-cyclodextrin (HP-β-CD) and MgCO3. Solid dispersions (SD) have been prepared using a mechanochemical technique. The physical properties of nimesulide SD in solid state were characterized by differential scanning calorimetry and X-ray diffraction studies. The characteristics of the water solutions which form from the obtained solid dispersions were analyzed by reverse phase and gel permeation HPLC. It was shown that solubility increases for all complexes under investigation. These phenomena are obliged by complexation with auxiliary substances, which was shown by 1H-NMR relaxation methods. The parallel artificial membrane permeability assay (PAMPA) was used for predicting passive intestinal absorption. Results showed that mechanochemically obtained complexes with polysaccharide AG, Na2GA, and HP-β-CD enhanced permeation of NIM across an artificial membrane compared to that of the pure NIM. The complexes were examined for anti-inflammatory activity on a model of histamine edema. The substances were administered per os to CD-1 mice. As a result, it was found that all investigated complexes dose-dependently reduce the degree of inflammation. The best results were obtained for the complexes of NIM with Na2GA and HP-β-CD. In noted case the inflammation can be diminished up to 2-fold at equal doses of NIM.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

scholarly journals Improved dissolution and micromeritic properties of naproxen from spherical agglomerates: preparation, in vitro and in vivo characterization

2012 ◽  
Vol 48 (4) ◽  
pp. 667-676 ◽  
Author(s):  
Damineni Saritha ◽  
Penjuri Subhash Chandra Bose ◽  
Poreddy Srikanth Reddy ◽  
Grandhi Madhuri ◽  
Ravouru Nagaraju
Keyword(s):  
Aqueous Solubility ◽  
Albino Rats ◽  
Significant Activity ◽  
Scanning Calorimetry ◽  
Small Crystals ◽  
Spherical Agglomerates ◽  
Pure Drug ◽  
Anti Inflammatory

Naproxen, an anti-inflammatory drug, exhibits poor aqueous solubility, which limits the pharmacological effects. The present work was carried out to study the effect of agglomeration on micromeritic properties and dissolution. Naproxen agglomerates were prepared by using a three solvents system composed of acetone (good solvent), water (non-solvent) and dichloromethane (bridging liquid). Differential Scanning Calorimetry (DSC) results showed no change in the drug after crystallization process. X-Ray Powder Diffraction (XRPD) studies showed the sharp peaks are present in the diffractograms of spherical agglomerates with minor reduction in height of the peaks. The residual solvents are largely below the tolerated limits in the agglomerates. Scanning Electronic Microscopy (SEM) studies showed that agglomerates were spherical in structure and formed by cluster of small crystals. The agglomerates exhibited improved solubility, dissolution rate and micromeritic properties compared to pure drug. Anti-inflammatory studies were conducted in Wistar strain male albino rats and naproxen agglomerates showed more significant activity than the pure drug.

Enhancement of Dissolution Rate of Quercetin Using Solid Dispersion Approach: In Vitro and In Vivo Evaluation

2020 ◽  
Vol 10 (3) ◽  
pp. 330-349
Author(s):  
Raghvendra Chaubey ◽  
Nimisha Srivastava ◽  
Apoorva Singh
Keyword(s):  
Drug Release ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
Dissolution Profile ◽  
In Vivo Evaluation ◽  
Rat Paw Edema ◽  
Anti Inflammatory

Objective: The objective of present study was to enhance the potential activities of Quercetin by improving its solubility and dissolution profiles through solid dispersion approach. Method: A three level full factorial design (32) was adopted to study the possible combinations of polyethylene glycol (PEG) 6000 & pluronic F 127 (PF 127). The solid dispersions were prepared by solvent evaporation method and evaluated for percentage yield, drug content, aqueous solubility and drug release. For in vivo evaluations SD4 was incorporated into Carbopol base gel and subjected to anti-inflammatory activity using carrageenan-induced rat paw edema method. Results: SD4 batch with drug to carrier ratio 1:1 showed release of 82.96 ± 1.76 % in 240 min following Higuchi’s model. It was 5.54 fold increment in solubility as compared to quercetin. SD4 batch was further evaluated by FTIR, DSC, PXRD and SEM. The crystallinity was significantly reduced and drug was homogeneously dispersed in the carrier as shown by the results of DSC, PXRD and SEM. The DPPH scavenging assay showed significance in the IC50 value of SD4 as compared to pure quercetin and ascorbic acid when subjected to one way ANOVA at 0.05 level of significance (P<0.0001). In vivo anti-inflammatory study showed 78.17 ± 0.156 % inhibition of edema by SD4 and 58.64 ± 0.640 % by pure quercetin which is significantly lower (P<0.05). Conclusion: These findings demonstrate that the solid dispersion of quercetin shows increased solubility, dissolution profile, drug release and significant potential in enhancing the antiinflammatory activity of drug.

Enhancement of Solubility and Dissolution Rate of Poorly Water Soluble Drug using Cosolvency and Solid Dispersion Techniques

1970 ◽  
Vol 1 (4) ◽  
pp. 349-356
Author(s):  
Meka Lingam ◽  
Vobalaboina Venkateswarlu
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physicochemical Characterization ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Peg 400 ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

The low aqueous solubility of celecoxib (CB) and thus its low bioavailability is a problem.    Thus, it is suggested to improve the solubility using cosolvency and solid dispersions techniques. Pure CB has solubility of 6.26±0.23µg/ml in water but increased solubility of CB was observed with increasing concentration of cosolvents like PEG 400, ethanol and propylene glycol. Highest solubility (791.06±15.57mg/ml) was observed with cosolvency technique containing the mixture of composition 10:80:10%v/v of water: PEG 400: ethanol. SDs with different polymers like PVP, PEG were prepared and subjected to physicochemical characterization using Fourier-transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), solubility and dissolution studies. These studies reveals that CB exists mainly in amorphous form in prepared solid dispersions of PVP, PEG4000 and PEG6000 further it can also be confirmed by solubility and dissolution rate studies. Solid dispersions of PV5 and PV9 have shown highest saturation solubility and dissolution rate

scholarly journals Ketorolac-dextran conjugates: Synthesis, in vitro and in vivo evaluation

2007 ◽  
Vol 57 (4) ◽  
pp. 441-450 ◽  
Author(s):  
Savita Vyas ◽  
Piyush Trivedi ◽  
Subhash Chaturvedi
Keyword(s):  
Human Plasma ◽  
Parent Drug ◽  
Aqueous Solubility ◽  
Spectrophotometric Analysis ◽  
In Vivo Evaluation ◽  
Gastrointestinal Side Effects ◽  
Molecular Masses ◽  
Anti Inflammatory

Ketorolac-dextran conjugates: Synthesis,in vitroandin vivoevaluationKetorolac is a non-steroidal anti-inflammatory drug. Dextran conjugates of ketorolac (KD) were synthesized and characterized to improve ketorolac aqueous solubility and reduce gastrointestinal side effects. An N-acylimidazole derivative of ketorolac (KAI) was condensed with a model carrier polymer, dextran of different molecular masses (40000, 60000, 110000 and 200000). IR spectral data confirmed formation of ester bonding. Ketorolac contents were evaluated by UV-spectrophotometric analysis. The molecular mass was determined by measuring viscosity using the Mark-Howink-Sakurada equation. Invitrohydrolysis studies were performed in aqueous buffers (pH 1.2, 7.4, 9) and in 80% (V/V) human plasma (pH 7.4). At pH 9, a higher rate of ketorolac release from KD was observed as compared to aqueous buffer of pH 7.4 and 80% human plasma (pH 7.4), following first-order kinetics.In vivobiological screening in mice and rats indicated that conjugates retained analgesic and anti-inflammatory activities with significantly reduced ulcerogenicity compared to the parent drug.

scholarly journals PREPARATION AND CHARACTERIZATION OF NANOCRYSTALS FOR SOLUBILITY AND DISSOLUTION RATE ENHANCEMENT OF PALIPERIDONE USING DIFFERENT HYDROPHILIC CARRIERS: IN VITRO-IN VIVO STUDY

2018 ◽  
Vol 11 (4) ◽  
pp. 393
Author(s):  
Moon Rajkumar ◽  
Gattani Surendra
Keyword(s):  
Dissolution Rate ◽  
Antipsychotic Agent ◽  
Aqueous Solubility ◽  
In Vivo Study ◽  
Scanning Calorimetry ◽  
Antisolvent Precipitation ◽  
Enhanced Solubility ◽  
Pure Drug

 Objective: The objective of this study was to increase the solubility and dissolution rate of paliperidone (PAL) by preparing its nanocrystals using different hydrophilic carriers by antisolvent precipitation technique.Methods: The nanoparticles (NP) were characterized for aqueous solubility, drug content, Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, particle size, and in vitro-in vivo analysis.Results: The results showed improved solubility and dissolution rate of NPs when compared to pure drug and physical mixture (PM). Solubility data showed a linear graph giving an indication that there is a gradual increase in the solubility profile of the drug with an increase in concentration of the carriers. At highest concentration, the solubility of NPs with Plasdone S630, Povidone K-25, and PVP K-30 found to be increased by 12 folds, 9 folds and 6 folds, respectively, as compared to pure drug. The release profile of NPs with Plasdone S630 in terms of dissolution efficiency at 60 min (DE60), initial dissolution rate (IDR), amount release in 15 min (Q15 min), and time for 75% release (t75%) shows better results when compared to pure drug, PM, and also NPs with povidone 25 and povidone 30. In vivo study reveals that optimized NPs elicited significant induction of cataleptic behavior which is the indication of antipsychotic agent(s) effect.Conclusion: The process antisolvent precipitation under constant stirring may be a promising method to produce stable PAL NPs with markedly enhanced solubility and dissolution rate due to nanonization with the increased surface area, improved wettability, and reduced diffusion pathway.

scholarly journals Development, Optimisation and Evaluation of Ketoprofen Lipospheres

2020 ◽  
Vol 11 (SPL4) ◽  
pp. 1853-1863
Author(s):  
Shubhra Rai ◽  
Gopal Rai ◽  
Ashish Budhrani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Research Work ◽  
Extended Period ◽  
Entrapment Efficiency ◽  
Inflammatory Activity ◽  
Scanning Calorimetry ◽  
Anti Inflammatory

Lipospheres represent a novel type of fat-based encapsulation system produced for the topical drug delivery of bioactive compounds. The goal of this research work was to develop lipospheres, including ketoprofen applied for topical skin drug delivery. Ketoprofen lipospheres were formulated by melt emulsification method using stearic acid and Phospholipon® 90G. The lipospheres were analysed in terms of particle size and morphology, entrapment efficiency, Differential scanning calorimetry, In-vitro drug release, In-vivo (Anti-inflammatory activity). Outcomes of research revealed that particle size was found to be 9.66 µm and entrapment efficiency 86.21 ± 5.79 %. In-vivo, the study of ketoprofen loaded lipospheres formulation shows a higher plain formulation concentration in plasma (5.61 mg/mL). For dermis, ketoprofen retention was 27.02 ± 5.4 mg/mL for the lipospheres formulation, in contrast to that of the plain formulation group (10.05 ± 2.8 mg/mL). The anti-inflammatory effect of liposphere drug delivery systems was assessed by the xylene induced ear oedema technique and compared with marketed products. Finally, it seems that the liposphere drug delivery system possesses superior anti-inflammatory activity as compared to the marketed product gel consistencies. Liposphere may be capable of entrapping the medicament at very high levels and controlling its release over an extended period. Liposphere furnishes a proper size for topical delivery as well as is based on non-irritating and non-toxic lipids; it’s a better option for application on damaged or inflamed skin.

scholarly journals Progress to Improve Oral Bioavailability and Beneficial Effects of Resveratrol

2019 ◽  
Vol 20 (6) ◽  
pp. 1381 ◽  
Author(s):  
Adele Chimento ◽  
Francesca De Amicis ◽  
Rosa Sirianni ◽  
Maria Sinicropi ◽  
Francesco Puoci ◽  
...  
Keyword(s):  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vivo Studies ◽  
Beneficial Effects ◽  
Lipid Nanocarriers ◽  
Methodological Approaches ◽  
Neuroprotective Actions ◽  
Synthetic Derivatives

Resveratrol (3,5,4′-trihydroxystilbene; RSV) is a natural nonflavonoid polyphenol present in many species of plants, particularly in grapes, blueberries, and peanuts. Several in vitro and in vivo studies have shown that in addition to antioxidant, anti-inflammatory, cardioprotective and neuroprotective actions, it exhibits antitumor properties. In mammalian models, RSV is extensively metabolized and rapidly eliminated and therefore it shows a poor bioavailability, in spite it of its lipophilic nature. During the past decade, in order to improve RSV low aqueous solubility, absorption, membrane transport, and its poor bioavailability, various methodological approaches and different synthetic derivatives have been developed. In this review, we will describe the strategies used to improve pharmacokinetic characteristics and then beneficial effects of RSV. These methodological approaches include RSV nanoencapsulation in lipid nanocarriers or liposomes, nanoemulsions, micelles, insertion into polymeric particles, solid dispersions, and nanocrystals. Moreover, the biological results obtained on several synthetic derivatives containing different substituents, such as methoxylic, hydroxylic groups, or halogens on the RSV aromatic rings, will be described. Results reported in the literature are encouraging but require additional in vivo studies, to support clinical applications.

scholarly journals Design and Characterization of Phosphatidylcholine-Based Solid Dispersions of Aprepitant for Enhanced Solubility and Dissolution

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 407
Author(s):  
Sooho Yeo ◽  
Jieun An ◽  
Changhee Park ◽  
Dohyun Kim ◽  
Jaehwi Lee
Keyword(s):  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Promising Alternative ◽  
Dispersion System ◽  
Enhanced Solubility ◽  
Water Soluble Drugs

This study aimed to improve the solubility and dissolution of aprepitant, a drug with poor aqueous solubility, using a phosphatidylcholine (PC)-based solid dispersion system. When fabricating the PC-based solid dispersion, we employed mesoporous microparticles, as an adsorbent, and disintegrants to improve the sticky nature of PC and dissolution of aprepitant, respectively. The solid dispersions were prepared by a solvent evaporation technique and characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry, and X-ray powder diffraction. The FTIR results showed that aprepitant interacted with the PC carrier by both hydrogen bonds and van der Waals forces that can also be observed in the interaction between aprepitant and polymer carriers. The solid dispersions fabricated with only PC were not sufficient to convert the crystallinity of aprepitant to an amorphous state, whereas the formulations that included adsorbent and disintegrant successfully changed that of aprepitant to an amorphous state. Both the solubility and dissolution of aprepitant were considerably enhanced in the PC-based solid dispersions containing adsorbent and disintegrant compared with those of pure aprepitant and polymer-based solid dispersions. Therefore, these results suggest that our PC-based solid dispersion system is a promising alternative to conventional formulations for poorly water-soluble drugs, such as aprepitant.

In vitro and in vivo delivery of atorvastatin: A comparative study of anti-inflammatory activity of atorvastatin loaded copolymeric micelles

2017 ◽  
Vol 32 (8) ◽  
pp. 1127-1138 ◽  
Author(s):  
Sina Andalib ◽  
Pezhman Molhemazar ◽  
Hossein Danafar
Keyword(s):  
Inflammatory Responses ◽  
Inflammatory Activity ◽  
Lipid Lowering ◽  
Precipitation Method ◽  
Paw Edema ◽  
Scanning Calorimetry ◽  
Rat Paw Edema ◽  
Anti Inflammatory

Statins have been shown to exert ‘pleiotropic effects’ independent of their cholesterol lowering actions that include anti-inflammatory properties. In this study we synthesized mono methoxy poly (ethylene glycol)–poly (ε-caprolactone) (mPEG-PCL) di block copolymers. The structure of the copolymers was characterized by H nuclear magnetic resonance, Fourier-transform infrared spectroscopy, differential scanning calorimetry and gel permeation chromatography techniques. In this method, atorvastatin was encapsulated within micelles through a single-step nano-precipitation method, leading to the formation of atorvastatin-loaded mPEG-PCL (atorvastatin/mPEG-PCL) micelles. The resulting micelles were characterized further by various techniques such as dynamic light scattering and atomic force microscopy. In this study the anti-inflammatory activity of atorvastatin and atorvastatin/mPEG-PCL micelles on acute models of inflammation are analyzed, to compare the effect of indometacin in rats. Carrageenan induces rat paw edema; six animals of each group (10 groups) received indometacin, atorvastatin, and atorvastatin/mPEG-PCL micelles orally 1, 6, 12 and 24 h before carrageenan injection in paw. The paw edema thickness measured at 1, 2, 3 and 4 h after injection and percentage inhibition of edema in various groups were calculated. The results showed that the zeta potential of micelles was about −16.6 mV and the average size was 81.7 nm. Atorvastatin was encapsulated into mPEG-PCL micelles with loading capacity of 14.60 ± 0.96% and encapsulation efficiency of 62.50 ± 0.84%. Atorvastatin and atorvastatin/mPEG-PCL micelles showed significant anti-inflammatory activity in the present study. The anti-inflammatory activity of atorvastatin and atorvastatin/mPEG-PCL micelles was significant in comparison with indometacin. Atorvastatin/mPEG-PCL micelles showed more anti-inflammatory activity than atorvastatin. This study revealed the anti-inflammatory activity of atorvastatin and atorvastatin/mPEG-PCL micelles and suggested the statins have a potential inflammatory activity along with its lipid lowering properties. Contrary to anti-inflammatory effects, the pro-inflammatory responses are independent of 3-hydroxy-3-methylglutaryl coenzyme A reductase inhibition and can be mediated directly by atorvastatin.

Sign in / Sign up

Export Citation Format

Share Document