scholarly journals Preparation and Characterization of Optically Active Polyurethane from Rotatory Binaphthol Monomer and Polyurethane Prepolymer

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2986
Author(s):  
Ling Lin ◽  
Haiyan Mao ◽  
Ziyin Li ◽  
Wenyao Li ◽  
Chaoxia Wang
Keyword(s):  
Thermal Insulation ◽  
Waterborne Polyurethane ◽  
Structural Features ◽  
Optically Active ◽  
Structure Characterization ◽  
Optically Active Polymers ◽  
Infrared Emissivity ◽  
Monomer Content ◽  
Cooling Ability

Optically active polymers are promising multifunctional materials with great application potentials. Herein, environmentally friendly optically active polyurethanes (OPUs) were obtained by introducing rotatory binaphthol monomer to polyurethane. The influence of binaphthol monomer content on the structure, mechanical properties, infrared emissivity, and thermal insulation of OPUs was studied intensively. Structure characterization indicated that the optically active polyurethanes have been successfully synthesized. The OPU synthesized with BIMOL and BDO at the mole ratio of 1:1 presented better thermal resistance. In addition, OPUs showed enhanced tensile strength and stretchability with the increase of BINOL content to a certain extent due to its rigid structural features and high molecular weight. The optically active polyurethanes showed lower infrared emissivity values (8–14 μm) than waterborne polyurethane (WPU), and the infrared emissivity decreased from 0.850 to 0.572 as the content of the BINOL monomer increased. Moreover, OPU4 exhibited the best heat insulation and cooling ability with about a 7 °C temperature difference. The thus-synthesized optically active polyurethanes provide an effective solution for developing highly effective thermal insulation materials.

Fabrication and characterization of optically active polyacetylene@WO3 nanorodhybrids with low infrared emissivity

2014 ◽  
Vol 120 ◽  
pp. 239-242 ◽  
Author(s):  
Xiaohai Bu ◽  
Yuming Zhou ◽  
Man He ◽  
Zhenjie Chen ◽  
Tao Zhang ◽  
...  
Keyword(s):  
Optically Active ◽  
Infrared Emissivity ◽  
Fabrication And Characterization

Skeletal elements of crinoid echinoderms: High-resolution structural and microanalytical results

1983 ◽  
Vol 41 ◽  
pp. 194-195
Author(s):  
D. F. Blake ◽  
L. F. Allard ◽  
D. R. Peacor
Keyword(s):  
High Resolution ◽  
Marine Invertebrates ◽  
Sea Urchins ◽  
Structural Features ◽  
Sea Stars ◽  
High Resolution Tem ◽  
Relationship Of ◽  
The Relationship ◽  
Insight Into

Echinodermata is a phylum of marine invertebrates which has been extant since Cambrian time (c.a. 500 m.y. before the present). Modern examples of echinoderms include sea urchins, sea stars, and sea lilies (crinoids). The endoskeletons of echinoderms are composed of plates or ossicles (Fig. 1) which are with few exceptions, porous, single crystals of high-magnesian calcite. Despite their single crystal nature, fracture surfaces do not exhibit the near-perfect {10.4} cleavage characteristic of inorganic calcite. This paradoxical mix of biogenic and inorganic features has prompted much recent work on echinoderm skeletal crystallography. Furthermore, fossil echinoderm hard parts comprise a volumetrically significant portion of some marine limestones sequences. The ultrastructural and microchemical characterization of modern skeletal material should lend insight into: 1). The nature of the biogenic processes involved, for example, the relationship of Mg heterogeneity to morphological and structural features in modern echinoderm material, and 2). The nature of the diagenetic changes undergone by their ancient, fossilized counterparts. In this study, high resolution TEM (HRTEM), high voltage TEM (HVTEM), and STEM microanalysis are used to characterize tha ultrastructural and microchemical composition of skeletal elements of the modern crinoid Neocrinus blakei.

Ultrastructural identification of three types of sensory setae on copepod antennae

1995 ◽  
Vol 53 ◽  
pp. 956-957
Author(s):  
T. M. Weatherby ◽  
P.H. Lenz
Keyword(s):  
Phase Locking ◽  
Membrane Surface ◽  
Reaction Times ◽  
High Sensitivity ◽  
Structural Features ◽  
Calanoid Copepods ◽  
Marine Food Webs ◽  
Dendritic Membrane ◽  
Ultrastructural Characterization

Crustaceans, as well as other arthropods, are covered with sensory setae and hairs, including mechanoand chemosensory sensillae with a ciliary origin. Calanoid copepods are small planktonic crustaceans forming a major link in marine food webs. In conjunction with behavioral and physiological studies of the antennae of calanoids, we undertook the ultrastructural characterization of sensory setae on the antennae of Pleuromamma xiphias.Distal mechanoreceptive setae exhibit exceptional behavioral and physiological performance characteristics: high sensitivity (<10 nm displacements), fast reaction times (<1 msec latency) and phase locking to high frequencies (1-2 kHz). Unusual structural features of the mechanoreceptors are likely to be related to their physiological sensitivity. These features include a large number (up to 3000) of microtubules in each sensory cell dendrite, arising from or anchored to electron dense rods associated with the ciliary basal body microtubule doublets. The microtubules are arranged in a regular array, with bridges between and within rows. These bundles of microtubules extend far into each mechanoreceptive seta and terminate in a staggered fashion along the dendritic membrane, contacting a large membrane surface area and providing a large potential site of mechanotransduction.

Quantitative nano-characterization of heterogeneous catalysts

1995 ◽  
Vol 53 ◽  
pp. 398-399
Author(s):  
P.A. Crozier ◽  
M. Pan
Keyword(s):  
Heterogeneous Catalysts ◽  
Low Dose ◽  
Imaging Techniques ◽  
Structural Features ◽  
Catalyst Characterization ◽  
New Developments ◽  
Double Phase ◽  
Phase Systems ◽  
Dose Imaging

Heterogeneous catalysts can be of varying complexity ranging from single or double phase systems to complicated mixtures of metals and oxides with additives to help promote chemical reactions, extend the life of the catalysts, prevent poisoning etc. Although catalysis occurs on the surface of most systems, detailed descriptions of the microstructure and chemistry of catalysts can be helpful for developing an understanding of the mechanism by which a catalyst facilitates a reaction. Recent years have seen continued development and improvement of various TEM, STEM and AEM techniques for yielding information on the structure and chemistry of catalysts on the nanometer scale. Here we review some quantitative approaches to catalyst characterization that have resulted from new developments in instrumentation.HREM has been used to examine structural features of catalysts often by employing profile imaging techniques to study atomic details on the surface. Digital recording techniques employing slow-scan CCD cameras have facilitated the use of low-dose imaging in zeolite structure analysis and electron crystallography. Fig. la shows a low-dose image from SSZ-33 zeolite revealing the presence of a stacking fault.

Characterization of microwave-sintered ceramic composites

1993 ◽  
Vol 51 ◽  
pp. 1136-1137
Author(s):  
X. Zhang ◽  
Y. Pan ◽  
T.T. Meek
Keyword(s):  
Matrix Material ◽  
Maximum Output Power ◽  
Ceramic Matrix Composite ◽  
Ceramic Composites ◽  
Processing Technique ◽  
Structure Characterization ◽  
Alumina Powder ◽  
Maximum Output ◽  
Sintered Ceramic

Industrial microwave heating technology has emerged as a new ceramic processing technique. The unique advantages of fast sintering, high density, and improved materials properties makes it superior in certain respects to other processing methods. This work presents the structure characterization of a microwave sintered ceramic matrix composite.Commercial α-alumina powder A-16 (Alcoa) is chosen as the matrix material, β-silicon carbide whiskers (Third Millennium Technologies, Inc.) are used as the reinforcing element. The green samples consisted of 90 vol% Al2O3 powder and 10 vol% ultrasonically-dispersed SiC whiskers. The powder mixture is blended together, and then uniaxially pressed into a cylindrical pellet under a pressure of 230 MPa, which yields a 52% green density. The sintering experiments are carried out using an industry microwave system (Gober, Model S6F) which generates microwave radiation at 2.45 GHz with a maximum output power of 6 kW. The composites are sintered at two different temperatures (1550°C and 1650°C) with various isothermal processing time intervals ranging from 10 to 20 min.

Sign in / Sign up

Export Citation Format

Share Document