scholarly journals Free-Standing and Heteroatoms-Doped Carbon Nanofiber Networks as a Binder-Free Flexible Electrode for High-Performance Supercapacitors

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1189 ◽  
Author(s):  
Yan ◽  
You ◽  
Liu ◽  
Wang ◽  
Wu
Keyword(s):  
High Performance ◽  
Carbon Nanofiber ◽  
Three Dimensional ◽  
Rate Capability ◽  
Mesoporous Structure ◽  
High Energy ◽  
High Energy Density ◽  
Free Standing ◽  
Electrode Cell ◽  
Binder Free

Flexible and heteroatoms-doped (N, O and P) activated carbon nanofiber networks (ACFNs) have been successfully prepared with a mixture of polyamic acid (PAA) and poly(diaryloxyphosphazene) (PDPP) as a solution through electrospinning, followed by a heat post-treatment. The resultant heteroatoms-doped ACFNs can be used as binder-free electrodes for high-performance flexible supercapacitors (SCs) due to lightweight, three-dimensional open-pore structure and good mechanical strength. Despite its surface area being lower than 130.6 m2·g−1, the heteroatoms-doped ACFNs exhibited a high heteroatoms (N, O and P) content of 17.9%, resulting in a highly specific capacitance of 182 F·g−1 at a current density of 1 A·g−1 in 6 M KOH electrolyte in a two-electrode cell and an excellent rate capability of 74.7% of its initial capacitance from 1 A·g−1 to 10 A·g−1 under the mass loading of 1.5 mg·cm−2. The electrical double-layer (EDL) capacitance and pseudocapacitance can be easily decoupled in the heteroatoms-doped mesoporous ACFNs. SCs device based on heteroatoms-doped ACFNs exhibited a high energy density of 6.3 W·h·kg−1 with a power density of 250 W·kg−1, as well as excellent cycling stability with 88% capacitance retention after 10,000 charge–discharge cycles. The excellent electrochemical performance was attributed to the mesoporous structure of ACFNs and pseudocapacitive heteroatoms.

scholarly journals Supercritical CO2 Synthesis of Freestanding Se1-xSx Foamy Cathodes for High-Performance Li-Se1-xSx Battery

2021 ◽  
Vol 9 ◽  
Author(s):  
Chengwei Lu ◽  
Ruyi Fang ◽  
Kun Wang ◽  
Zhen Xiao ◽  
G. Gnana kumar ◽  
...  
Keyword(s):  
High Performance ◽  
Specific Capacity ◽  
Three Dimensional ◽  
Rate Capability ◽  
Carbon Matrix ◽  
High Energy ◽  
Rechargeable Batteries ◽  
High Energy Density ◽  
Rechargeable Lithium Batteries ◽  
Practical Applications

Selenium-sulfur solid solutions (Se1-xSx) are considered to be a new class of promising cathodic materials for high-performance rechargeable lithium batteries owing to their superior electric conductivity than S and higher theoretical specific capacity than Se. In this work, high-performance Li-Se1-xSx batteries employed freestanding cathodes by encapsulating Se1-xSx in a N-doped carbon framework with three-dimensional (3D) interconnected porous structure (NC@SWCNTs) are proposed. Se1-xSx is uniformly dispersed in 3D porous carbon matrix with the assistance of supercritical CO2 (SC-CO2) technique. Impressively, NC@SWCNTs host not only provides spatial confinement for Se1-xSx and efficient physical/chemical adsorption of intermediates, but also offers a highly conductive framework to facilitate ion/electron transport. More importantly, the Se/S ratio of Se1-xSx plays an important role on the electrochemical performance of Li- Se1-xSx batteries. Benefiting from the rationally designed structure and chemical composition, NC@[email protected] cathode exhibits excellent cyclic stability (632 mA h g−1 at 200 cycle at 0.2 A g−1) and superior rate capability (415 mA h g−1 at 2.0 A g−1) in carbonate-based electrolyte. This novel NC@[email protected] cathode not only introduces a new strategy to design high-performance cathodes, but also provides a new approach to fabricate freestanding cathodes towards practical applications of high-energy-density rechargeable batteries.

Ultrathin nickel hydroxide on carbon coated 3D-porous copper structures for high performance supercapacitors

2018 ◽  
Vol 20 (2) ◽  
pp. 719-727 ◽  
Author(s):  
Kyeong-Nam Kang ◽  
Ik-Hee Kim ◽  
Ananthakumar Ramadoss ◽  
Sun-I Kim ◽  
Jong-Chul Yoon ◽  
...  
Keyword(s):  
Energy Density ◽  
High Performance ◽  
Three Dimensional ◽  
Rate Capability ◽  
High Energy ◽  
High Energy Density ◽  
Cycle Stability ◽  
Porous Copper ◽  
Carbon Coated ◽  
Copper Structure

Ultrahigh rate capability, cycle stability, and high energy density supercapacitors supported by the three-dimensional (3D) carbon coated copper structure.

Binder-free three-dimensional high energy density electrodes for ionic-liquid supercapacitors

2015 ◽  
Vol 51 (72) ◽  
pp. 13760-13763 ◽  
Author(s):  
Chau Tran ◽  
Daniel Lawrence ◽  
Francis W. Richey ◽  
Caitlin Dillard ◽  
Yossef A. Elabd ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Energy Density ◽  
Porous Carbon ◽  
Room Temperature ◽  
Carbon Nanofiber ◽  
Three Dimensional ◽  
High Energy ◽  
High Energy Density ◽  
Porous Carbon Nanofiber ◽  
Binder Free

We demonstrate a facile methodology to fabricate binder-free porous carbon nanofiber electrodes for room temperature ionic-liquid supercapacitors.

A High-Performance Free-Standing Zn Anode for Flexible Zinc-Ion Batteries

Nanoscale ◽  
2021 ◽  
Author(s):  
Chenxi Gao ◽  
Jiawei Wang ◽  
Yuan Huang ◽  
Zixuan Li ◽  
Jiyan Zhang ◽  
...  
Keyword(s):  
Energy Density ◽  
High Performance ◽  
Low Cost ◽  
High Energy ◽  
Zinc Ion ◽  
High Energy Density ◽  
Free Standing ◽  
Energy Device ◽  
Zn Anode ◽  
Significant Attention

Zinc-ion batteries (ZIBs) have attracted significant attention owing to their high safety, high energy density, and low cost. ZIBs have been studied as a potential energy device for portable and...

Hierarchical coral-like MnCo2O4.5@Co-Ni LDH composites on Ni foam as promising electrodes for high-performance supercapacitor

2021 ◽  
Author(s):  
yajun JI ◽  
Fei Chen ◽  
Shufen Tan ◽  
Fuyong Ren
Keyword(s):  
Electrochemical Performance ◽  
Metal Oxides ◽  
High Performance ◽  
High Capacity ◽  
Rate Capability ◽  
Negative Electrode ◽  
High Energy ◽  
Hybrid Nanostructures ◽  
High Energy Density ◽  
Ni Foam

Abstract Transition metal oxides are generally designed as hybrid nanostructures with high performance for supercapacitors by enjoying the advantages of various electroactive materials. In this paper, a convenient and efficient route had been proposed to prepare hierarchical coral-like MnCo2O4.5@Co-Ni LDH composites on Ni foam, in which MnCo2O4.5 nanowires were enlaced with ultrathin Co-Ni layered double hydroxides nanosheets to achieve high capacity electrodes for supercapacitors. Due to the synergistic effect of shell Co-Ni LDH and core MnCo2O4.5, the outstanding electrochemical performance in three-electrode configuration was triggered (high area capacitance of 5.08 F/cm2 at 3 mA/cm2 and excellent rate capability of maintaining 61.69 % at 20 mA/cm2), which is superior to those of MnCo2O4.5, Co-Ni LDH and other metal oxides based composites reported. Meanwhile, the as-prepared hierarchical MnCo2O4.5@Co-Ni LDH electrode delivered improved electrical conductivity than that of pristine MnCo2O4.5. Furthermore, the as-constructed asymmetric supercapacitor using MnCo2O4.5@Co-Ni LDH as positive and activated carbon as negative electrode presented a rather high energy density of 220 μWh/cm2 at 2400 μW/cm2 and extraordinary cycling durability with the 100.0 % capacitance retention over 8000 cycles at 20 mA/cm2, demonstrating the best electrochemical performance compared to other asymmetric supercapacitors using metal oxides based composites as positive electrode material. It can be expected that the obtained MnCo2O4.5@Co-Ni LDH could be used as the high performance and cost-effective electrode in supercapacitors.

scholarly journals Bio-inspired low-tortuosity carbon host for high-performance lithium-metal anode

2018 ◽  
Vol 6 (2) ◽  
pp. 247-256 ◽  
Author(s):  
Yi-Chen Yin ◽  
Zhi-Long Yu ◽  
Zhi-Yuan Ma ◽  
Tian-Wen Zhang ◽  
Yu-Yang Lu ◽  
...  
Keyword(s):  
Volume Change ◽  
High Performance ◽  
Rate Capability ◽  
High Energy ◽  
High Energy Density ◽  
Lithium Metal ◽  
Metal Anode ◽  
Lithium Metal Anode ◽  
Nucleation Sites ◽  
Micro Channels

Abstract Lithium metal is one of the most promising anode materials for high-energy-density Li batteries. However, low stability caused by dendrite growth and volume change during cycling hinders its practical application. Herein, we report an ingenious design of bio-inspired low-tortuosity carbon with tunable vertical micro-channels to be used as a host to incorporate nanosized Sn/Ni alloy nucleation sites, which can guide Li metal's plating/stripping and meanwhile accommodate the volume change. The pore sizes of the vertical channels of the carbon host can be regulated to investigate the structure–performance correlation. After compositing Li, the bio-inspired carbon host with the smallest pore size (∼14 μm) of vertical channels exhibits the lowest overpotential (∼18 mV at 1 mA cm−2), most stable tripping/plating voltage profiles, and best cycling stability (up to 500 cycles) in symmetrical cells. Notably, the carbon/Li composite anode is more rewarding than Li foil when coupled with LiFePO4 in full cells, exhibiting a much lower polarization effect, better rate capability and higher capacity retention (90.6% after 120 cycles). This novel bio-inspired design of a low-tortuosity carbon host with nanoalloy coatings may open a new avenue for fabricating advanced Li-metal batteries with high performance.

scholarly journals Synthesis of Si/Fe2O3-Anchored rGO Frameworks as High-Performance Anodes for Li-Ion Batteries

2021 ◽  
Vol 22 (20) ◽  
pp. 11041
Author(s):  
Yajing Yan ◽  
Yanxu Chen ◽  
Yongyan Li ◽  
Xiaoyu Wu ◽  
Chao Jin ◽  
...  
Keyword(s):  
High Performance ◽  
Melt Spinning ◽  
Three Dimensional ◽  
High Capacity ◽  
Reversible Capacity ◽  
High Energy ◽  
High Specific Surface Area ◽  
High Energy Density ◽  
Active Components ◽  
Li Ion

By virtue of the high theoretical capacity of Si, Si-related materials have been developed as promising anode candidates for high-energy-density batteries. During repeated charge/discharge cycling, however, severe volumetric variation induces the pulverization and peeling of active components, causing rapid capacity decay and even development stagnation in high-capacity batteries. In this study, the Si/Fe2O3-anchored rGO framework was prepared by introducing ball milling into a melt spinning and dealloying process. As the Li-ion battery (LIB) anode, it presents a high reversible capacity of 1744.5 mAh g−1 at 200 mA g−1 after 200 cycles and 889.4 mAh g−1 at 5 A g−1 after 500 cycles. The outstanding electrochemical performance is due to the three-dimensional cross-linked porous framework with a high specific surface area, which is helpful to the transmission of ions and electrons. Moreover, with the cooperation of rGO, the volume expansion of Si is effectively alleviated, thus improving cycling stability. The work provides insights for the design and preparation of Si-based materials for high-performance LIB applications.

Three-Dimensional MoS2/Graphene Hybrid Aerogel as Free-Standing, High-Performance Electrode for Supercapacitor

NANO ◽  
2020 ◽  
Vol 15 (05) ◽  
pp. 2050062
Author(s):  
Zhaolei Meng ◽  
Xiaojian He ◽  
Song Han ◽  
Zijian Hu
Keyword(s):  
Porous Structure ◽  
Surface Area ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Hydrothermal Process ◽  
Three Dimensional ◽  
Rate Capability ◽  
Free Standing ◽  
Hybrid Aerogel

Carbon materials are generally employed as supercapacitor electrodes due to their low- cost, high-chemical stability and environmental friendliness. However, the design of carbon structures with large surface area and controllable porous structure remains a daunt challenge. In this work, a three-dimensional (3D) hybrid aerogel with different contents of MoS2 nanosheets in 3D graphene aerogel (MoS2-GA) was synthesized through a facial hydrothermal process. The influences of MoS2 content on microstructure and subsequently on electrochemical properties of MoS2-GA are systematically investigated and an optimized mass ratio with MoS2: GA of 1:2 is chosen to achieve high mechanical robustness and outstanding electrochemical performance in the hybrid structure. Due to the large specific surface area, porous structure and continuous charge transfer network, such MoS2-GA electrodes exhibit high specific capacitance, good rate capability and excellent cyclic stability, showing great potential in large-scale and low-cost fabrication of high-performance supercapacitors.

Perforated mesoporous NiO nanostructures for an enhanced pseudocapacitive performance with ultra-high rate capability and high energy density

CrystEngComm ◽  
2019 ◽  
Vol 21 (46) ◽  
pp. 7130-7140 ◽  
Author(s):  
Narasimharao Kitchamsetti ◽  
Parameshwar R. Chikate ◽  
Ranjit A. Patil ◽  
Yuan-Ron Ma ◽  
Parasharam M. Shirage ◽  
...  
Keyword(s):  
Energy Density ◽  
Rate Capability ◽  
Mesoporous Structure ◽  
High Energy ◽  
High Rate ◽  
High Energy Density ◽  
High Rate Capability ◽  
Higher Power ◽  
Power And Energy ◽  
2D Nanosheets

The morphology of NiO (1D nanobelts and 2D nanosheets) has a significant effect on the pseudocapacitive performance. The perforated and interlinked mesoporous structure of NiO nanobelts delivered higher power and energy density than nanosheets.

scholarly journals Superior Pseudocapacitive Storage of a Novel Ni3Si2/NiOOH/Graphene Nanostructure for an All-Solid-State Supercapacitor

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Jing Ning ◽  
Maoyang Xia ◽  
Dong Wang ◽  
Xin Feng ◽  
Hong Zhou ◽  
...  
Keyword(s):  
Solid State ◽  
High Performance ◽  
Large Scale ◽  
Specific Capacity ◽  
Three Dimensional ◽  
Chemical Vapor ◽  
Specific Area ◽  
High Energy ◽  
Scale Production ◽  
Free Standing

Abstract Recent developments in the synthesis of graphene-based structures focus on continuous improvement of porous nanostructures, doping of thin films, and mechanisms for the construction of three-dimensional architectures. Herein, we synthesize creeper-like Ni3Si2/NiOOH/graphene nanostructures via low-pressure all-solid melting-reconstruction chemical vapor deposition. In a carbon-rich atmosphere, high-energy atoms bombard the Ni and Si surface, and reduce the free energy in the thermodynamic equilibrium of solid Ni–Si particles, considerably catalyzing the growth of Ni–Si nanocrystals. By controlling the carbon source content, a Ni3Si2 single crystal with high crystallinity and good homogeneity is stably synthesized. Electrochemical measurements indicate that the nanostructures exhibit an ultrahigh specific capacity of 835.3 C g−1 (1193.28 F g−1) at 1 A g−1; when integrated as an all-solid-state supercapacitor, it provides a remarkable energy density as high as 25.9 Wh kg−1 at 750 W kg−1, which can be attributed to the free-standing Ni3Si2/graphene skeleton providing a large specific area and NiOOH inhibits insulation on the electrode surface in an alkaline solution, thereby accelerating the electron exchange rate. The growth of the high-performance composite nanostructure is simple and controllable, enabling the large-scale production and application of microenergy storage devices.

Sign in / Sign up

Export Citation Format

Share Document