scholarly journals Morphological Transformation of Silver Nanoparticles from Commercial Products: Modeling from Product Incorporation, Weathering through Use Scenarios, and Leaching into Wastewater

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1258 ◽  
Author(s):  
Selvan Mohan ◽  
Juliska Princz ◽  
Banu Ormeci ◽  
Maria C. DeRosa
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Environmental Fate ◽  
Consumer Products ◽  
Morphological Transformation ◽  
Environmental Testing ◽  
X Ray ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Plasma Mass Spectrometry

There is increasing interest in the environmental fate and effects of engineered nanomaterials due to their ubiquitous use in consumer products. In particular, given the mounting evidence that dramatic transformations can occur to a nanomaterial throughout its product lifecycle, the appropriateness of using pristine nanomaterials in environmental testing is being questioned. Using a combination of transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma-mass spectrometry (ICP-MS), this work examines the morphological and compositional effects of conditions mimicking a typical lifecycle of a nano-enabled product, from the production of the silver nanoparticle (AgNP)-laden textiles, through its use, laundering, and then finally, its leaching and incubation in the wastewater collection system. These simulated weathering conditions showed evidence for the transformation of AgNPs into AgCl and Ag2S. Incubation in raw wastewater had the most dramatic effect on the AgNPs in terms of transformation, no matter what initial weathering was applied to the NPs prior to incubation. However, despite extensive transformation noted, AgNPs were still present within all the samples after the use scenarios.

scholarly journals Fe-Containing MOFs as Seeds for the Preparation of Highly Active Fe/Al-SBA-15 Catalysts in the NAlkylation of Aniline

Molecules ◽  
2019 ◽  
Vol 24 (15) ◽  
pp. 2695 ◽  
Author(s):  
Mhadmhan ◽  
Marquez-Medina ◽  
Romero ◽  
Reubroycharoen ◽  
Luque
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Catalytic Performance ◽  
Alkylation Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Highly Active ◽  
Milling Method ◽  
Plasma Mass Spectrometry

We have successfully incorporated iron species into mesoporous aluminosilicates (AlSBA15) using a simple mechanochemical milling method. The catalysts were characterized by nitrogen physisorption, inductively coupled plasma mass spectrometry (ICP-MS), pyridine (PY) and 2,6-dimethylpyridine (DMPY) pulse chromatography titration, powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). The catalysts were tested in the N-alkylation reaction of aniline with benzyl alcohol for imine production. According to the results, the iron sources, acidity of catalyst and reaction conditions were important factors influencing the reaction. The catalyst showed excellent catalytic performance, achieving 97% of aniline conversion and 96% of imine selectivity under optimized conditions.

Au NPs Loaded Al-MOF@PPy as Excellent Catalyst for the Removal of Organic Pollutants from Water

NANO ◽  
2021 ◽  
pp. 2150002
Author(s):  
Yalu Wu ◽  
Yinyin Xu ◽  
Jingbo Feng ◽  
Yan Zhang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Water Solution ◽  
Catalytic Performance ◽  
Degradation Efficiency ◽  
X Ray ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Growth Method ◽  
Infrared Spectrometer

The novel Al-MOF@PPy@Au nanocomposites were synthesized by an in-situ growth method. The prepared Al-MOF@PPy@Au nanocomposites were characterized by Transmission Electron Microscope (TEM), Fourier Transform Infrared Spectrometer (FTIR), X-ray powder diffraction (XRD), Inductively Coupled Plasma (ICP) and X-ray photoelectron spectroscopy (XPS). The catalytic properties of the prepared Al-MOF@PPy@Au nanocomposites with different content of Au were investigated. The results illustrated that the Al-MOF@PPy@Au(G) with 27.80 wt.% (w/w) Au obtained good catalytic performance. P-nitrophenol (4-NP), methyl orange (MO), methylene blue (MB) and rhodamine B (RhB) were used to test the catalytic degradation of Al-MOF@PPy@Au(G) nanocomposites. The degradation efficiency of the Al-MOF@PPy@Au(G) nanocomposites for 4-NP, MO, MB and RhB reached 92.12%, 93.84%, 93.19% and 92.44% within 25 min, 7 min, 16 min and 2 min, respectively. The Al-MOF@PPy@Au(G) nanocomposites still have good degradation efficiency and good stability for 4-NP within one month being in water. The Al-MOF@PPy@Au(G) nanocomposites can be applied to the real water solution without causing the change of the degradation efficiency.

scholarly journals Hydrodeoxygenation of Benzofuran over Bimetallic Ni-Cu/γ-Al2O3 Catalysts

Catalysts ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 274
Author(s):  
Tianhan Zhu ◽  
Hua Song ◽  
Feng Li ◽  
Yanguang Chen
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Flow Reactor ◽  
Reaction Network ◽  
Product Yield ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry ◽  
Temperature Programmed ◽  
Al2o3 Catalyst

Bimetallic NixCu(10−x)/γ-Al2O3 catalysts (where x is the mass fraction of Ni) with different Ni/Cu mass ratios were prepared. The catalysts were characterized by X-ray diffractometry, N2 adsorption–desorption, inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy, H2-temperature programmed reduction, and transmission electron microscopy. The effect of Ni/Cu mass ratio on benzofuran hydrodeoxygenation was investigated in a fixed-flow reactor. Cu addition improved the NiO reducibility. The strong interaction of Ni and Cu led to the formation of smaller and highly dispersed CuO and NiO species over γ-Al2O3, which favors an improvement in catalytic activity. Among the as-prepared catalysts, the Ni5Cu5/γ-Al2O3 showed the highest deoxygenated product yield (79.9%) with an acceptable benzofuran conversion of 95.2%, which increased by 18.3% and 16.9% compared with that of the monometallic Ni/γ-Al2O3 catalyst. A possible reaction network was proposed, which would provide insight into benzofuran hydrodeoxygenation over the Ni5Cu5/γ-Al2O3 catalyst.

scholarly journals Mechanism of Depression by Fe3+ During Hemimorphite Flotation

Minerals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 790
Author(s):  
Junbo Liu ◽  
Shuming Wen ◽  
Qicheng Feng ◽  
Qian Zhang ◽  
Yijie Wang ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Electrochemical Impedance ◽  
Test Results ◽  
X Ray ◽  
Inductively Coupled ◽  
Adsorption Analysis ◽  
Plasma Mass Spectrometry ◽  
Local Electrochemical Impedance Spectroscopy ◽  
Ph Range

Sulfide hemimorphite can be depressed by Fe3+ during flotation. In this study, the depression mechanism was studied by microflotation, inductively-coupled plasma mass spectrometry, local electrochemical impedance spectroscopy (LEIS), and X-ray photoelectron spectroscopy (XPS). Flotation test results suggested that sulfated hemimorphite can be depressed by Fe3+ across the entire pH range. LEIS, adsorption analysis, and XPS indicated that S species were adsorbed on hemimorphite as ZnS. The sulfide film was attenuated and no adsorbed Fe species were found after treatment with Fe3+. The results indicate that Fe3+ reacts with the ZnS film, which decreases the number S species, and this leads to hemimorphite depression.

scholarly journals Hydrous Hydrazine Decomposition for Hydrogen Production Using of Ir/CeO2: Effect of Reaction Parameters on the Activity

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1340
Author(s):  
Davide Motta ◽  
Ilaria Barlocco ◽  
Silvio Bellomi ◽  
Alberto Villa ◽  
Nikolaos Dimitratos
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Precipitation Method ◽  
Reaction Conditions ◽  
X Ray ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Icp Ms ◽  
Hydrazine Decomposition

In the present work, an Ir/CeO2 catalyst was prepared by the deposition–precipitation method and tested in the decomposition of hydrazine hydrate to hydrogen, which is very important in the development of hydrogen storage materials for fuel cells. The catalyst was characterised using different techniques, i.e., X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with X-ray detector (EDX) and inductively coupled plasma—mass spectroscopy (ICP-MS). The effect of reaction conditions on the activity and selectivity of the material was evaluated in this study, modifying parameters such as temperature, the mass of the catalyst, stirring speed and concentration of base in order to find the optimal conditions of reaction, which allow performing the test in a kinetically limited regime.

scholarly journals Rhodium Nanoparticles Stabilized by PEG-Tagged Imidazolium Salts as Recyclable Catalysts for the Hydrosilylation of Internal Alkynes and the Reduction of Nitroarenes

Catalysts ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1195
Author(s):  
Guillem Fernández ◽  
Roser Pleixats
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Optical Emission ◽  
Water Soluble ◽  
X Ray ◽  
Rhodium Nanoparticles ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Internal Alkynes ◽  
Recyclable Catalysts

PEGylated imidazolium (bromide and tetrafluoroborate) and tris-imidazolium (bromide) salts containing triazole linkers have been used as stabilizers for the preparation of water-soluble rhodium(0) nanoparticles by reduction of rhodium trichloride with sodium borohydride in water at room temperature. The nanomaterials have been characterized (Transmission Electron Microscopy, Electron Diffraction, X-ray Photoelectron Spectroscopy, Inductively Coupled Plasma-Optical Emission Spectroscopy). They proved to be efficient and recyclable catalysts for the stereoselective hydrosilylation of internal alkynes, in the presence or absence of solvent, and in the reduction of nitroarenes to anilines with ammonia-borane as hydrogen donor in aqueous medium (1:4 tetrahydrofuran/water).

scholarly journals Surfactant-assisted microwave synthesis of carbon supported MnO2 nanocomposites and their application for electrochemical supercapacitors

Chemija ◽  
2020 ◽  
Vol 31 (1) ◽  
Author(s):  
Jolita Jablonskienė ◽  
Dijana Šimkūnaitė ◽  
Jūratė Vaičiūnienė ◽  
Algirdas Selskis ◽  
Audrius Drabavičius ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Optical Emission ◽  
High Specific Capacitance ◽  
Mass Loading ◽  
X Ray ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Scan Rate

MnO2/C nanocomposites have been prepared using a simple onestep microwave heating method by applying different concentrations of cationic surfactant – cetyl trimethylammonium bromide (CTAB). The morphology and composition of the prepared MnO2/C nanocomposites have been investigated using X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and inductively coupled plasma optical emission spectroscopy (ICP-OES). The electrochemical performance of the prepared nanocomposites has been analysed using cyclic voltammetry. It was found that a high specific capacitance (Cs) of 742 F g−1 at a scan rate of 10 mV s−1 in a 1 M Na2SO4 solution has been obtained for the MnO2/C nanocomposite that has the mass loading of 0.140 mg cm−2 and has been synthesized in the absence of CTAB. Meanwhile, the application of CTAB allowed the increase in the mass loading of MnO2 in the nanocomposites. In the presence of CTAB, the highest value of 654 F g−1 at a scan rate of 10 mV s−1 has been obtained for MnO2/C that has the mass loading of 0.570 mg cm−2. This result confirmed a good performance of the prepared MnO2/C nanocomposites as the electrode material for supercapacitors.

scholarly journals Green Synthesis of CuInS2/ZnS Nanocrystals with High Photoluminescence and Stability

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Min Fu ◽  
Weiling Luan ◽  
Shan-Tung Tu ◽  
Leslaw Mleczko
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Shell Growth ◽  
Optical Emission ◽  
Growth Time ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Zns Nanocrystals

Highly photoluminescent core/shell CuInS2/ZnS (CIS/ZnS) nanocrystals were synthesized. Zinc acetate and dodecanethiol in octadecene solvent were used for shell growth. The structure and composition of QDs were investigated with inductively coupled plasma-optical emission spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. The crystal phase of CIS was tetragonal chalcopyrite. Based on X-ray diffraction analysis, it has been concluded that the growth of the ZnS shell did not affect the phase structure of CuInS2(CIS). Photoluminescence (PL) quantum yield (QY) of CIS increased to 80% after epitaxial growth of ZnS, and the PL emission wavelength can be feasibly tuned to be in the range of 560–710 nm by adjusting shell growth time. The superb photostability with high PL QY of CIS/ZnS nanocrystals is ascribed to the gradient of the chemical composition that has been formed between the core and the shell.

Sign in / Sign up

Export Citation Format

Share Document