scholarly journals Nanodispersions of Polyelectrolytes Based on Humic Substances: Isolation, Physico-Chemical Characterization and Evaluation of Biological Activity

Pharmaceutics ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1954
Author(s):  
Elena V. Uspenskaya ◽  
Anton V. Syroeshkin ◽  
Tatiana V. Pleteneva ◽  
Ilaha V. Kazimova ◽  
Tatiana V. Grebennikova ◽  
...  
Keyword(s):  
Targeted Delivery ◽  
Colloidal Particles ◽  
Chemical Properties ◽  
Chemical Characterization ◽  
Uv Spectra ◽  
Submicron Particles ◽  
Physico Chemical ◽  
Medicinal Substances ◽  
Fluorescent Radiation ◽  
High Concentrations

Natural polyelectrolytes, including in the form of complexes with colloidal particles, are increasingly used in pharmacy due to the possibility of regulated attachment of medicinal substances and their targeted delivery to the target organ. However, the formation, stability, and molecular-mass characteristics of polyelectrolyte nanodispersions (ND) vary depending on the nature and composition of the medium of their origin. This is due to the lack of standardized approaches to quality control and regulatory documentation for most natural ND. In this paper, we first introduced the isolation, followed by investigations into their physico-chemical properties and bioactivity. Using the dried droplet method, we were able to detect the “coffee ring effect”. Fractographic studies of the surface structure of EHA and FA dried samples using SEM showed its heterogeneity and the presence of submicron particles encapsulated in the internal molecular cavities of polyelectrolyte. FTIR spectroscopy revealed the ND chemical structure of benzo-α-pyron and benzo-γ-pyron, consisting of nanoparticles and a branched frame part. The main elements detected by X-ray fluorescence in humic substance extract and fulvic acid include Si, P, S, K, Ca, Mn, Fe, Cu, Zn, whereas Fe is in high concentrations. The UV-spectra and fluorescent radiation demonstrated the possibility of studying the effect of the fulvate chromone structure on its optical properties. It is shown that dilution of the initial solutions of polyelectrolytes 1:10 contributes to the detection of smaller nanoparticles and an increase in the absolute value of the negative ζ-potential as a factor of ND stability. A study of the EHS effect on the SARS-CoV-2 virus infectious titer in the Vero E6 cell showed the effective against virus both in the virucidal scheme (the SI is 11.90–22.43) and treatment/prevention scheme (the SI is 34.85–57.33). We assume that polyelectrolyte ND prevent the binding of the coronavirus spike glycoprotein to the receptor. Taking into account the results obtained, we expect that the developed approach can become unified for the standardization of the ND natural polyelectrolytes complex, which has great prospects for use in pharmacy and medicine as a drug with antiviral activity.

scholarly journals Soil physico-chemical characterization in the different soil layers of National Maize Research Program, Rampur, Chitwan, Nepal

2018 ◽  
Vol 3 (1) ◽  
pp. 28-44
Author(s):  
Dinesh Khadka ◽  
Sushil Lamichhane ◽  
Amit P Timilsina ◽  
Bandhu R Baral ◽  
Kamal Sah ◽  
...  
Keyword(s):  
Research Program ◽  
Soil Structure ◽  
Sandy Loam ◽  
Chemical Properties ◽  
Single Layer ◽  
Chemical Characterization ◽  
Bottom Layer ◽  
Soil Parameters ◽  
Physico Chemical

Soil pit digging and their precise study is a decision making tool to assess history and future of soil management of a particular area. Thus, the present study was carried out to differentiate soil physico-chemical properties in the different layers of excavated pit of the National Maize Research Program, Rampur, Chitwan, Nepal. Eight pits were dug randomly from three blocks at a depth of 0 to 100 cm. The soil parameters were determined in-situ, and in laboratory for texture, pH, OM, N, P (as P2O5), K (as K2O), Ca, Mg, S, B, Fe, Zn, Cu and Mn of collected soils samples of different layers following standard analytical methods at Soil Science Division, Khumaltar. The result revealed that soil structure was sub-angular in majority of the layers, whereas bottom layer was single grained. The value and chrome of colour was increasing in order from surface to bottom in the majority pits. Similarly, the texture was sandy loam in majority layers of the pits. Moreover, four types of consistence (loose to firm) were observed. Furthermore, mottles and gravels were absent in the majority layers. Likewise, soil was very to moderately acidic in observed layers of majority pits, except bottom layer of agronomy block was slightly acidic. Regarding fertility parameters (OM, macro and micronutrients), some were increasing and vice-versa, while others were intermittent also. Therefore, a single layer is not dominant for particular soil physico-chemical parameters in the farm. In overall, surface layer is more fertile than rest of the layers in all the pits.     

scholarly journals CHARACTERISTICS OF LEACHATE AT IHIAGWA DUMPSITE, IMO STATE NIGERIA AND THEIR IMPLICATIONS FOR SURFACE WATER POLLUTION

2021 ◽  
pp. 1-11
Author(s):  
CT Nelson ◽  
GT Amangabara ◽  
CO Owuama ◽  
CN Nzeh ◽  
CN Uyo
Keyword(s):  
Heavy Metals ◽  
Chemical Properties ◽  
Total Solid ◽  
Toxic Substances ◽  
Landfill Leachates ◽  
Total Chloride ◽  
Metal Cyanide ◽  
Physico Chemical ◽  
High Concentrations ◽  
Total Dissolved Solid

Open dumpsite is the most common way to eliminate solid urban wastes in this part of the world. An important problem associated to landfills and open dumpsite is the production of leachates. The leachates from these dumpsites have many toxic substances, which may adversely affect the environmental health. Thus in order to have a better management of characteristics of Ihiagwa-Nekede waste dump leachates, representative leachate samples were collected and analyzed for Physico-chemical properties and levels of heavy metals in them. Results indicate pH7.38, temperature 28.30 ℃ - 28.40℃, total dissolved solid 124.01mg/l-125.45mg/l, magnesium hardness 4.40mg/l-7.32mg/l, sulphate 3.60mg/l-3.70mg/l, and nitrate 27.00mg/l-27.60mg/l. Other parameters indicated as follows Conductivity1910𝜇𝑠/𝑐𝑚-1930.00 𝜇𝑠/𝑐𝑚, total chloride 891.72mg/l-891.74mg/l, carbonate 1708.00mg/l-1904.00mg/l, Ammonia 9.39mg/l-9.40mg/l, calcium hardness 373.17mg/l-375.61mg/l, total solid 2423.00mg/l-2454.00mg/l, phosphate 13.52mg/l-13.54mg/l. The heavy metal: cyanide 2.25mg/l-2.33mg/l, zinc 18.08mg/l-18.38mg/l, copper 19.90mg/l20.48mg/l, iron10.67mg/l-10.82mg/l, lead 1.27mg/l-1.41mg/l, and manganese 3.00mg/l-3.61mg/l, all these exceeded the WHO standards. The obtained results showed that the landfill leachates are characterized by high concentrations of heavy metals and other disease causing elements and therefore require urgent treatment to forestall the contamination of groundwater system and the nearby Otamiri River.

scholarly journals In Vitro Physico-Chemical Characterization and Standardized In Vivo Evaluation of Biocompatibility of a New Synthetic Membrane for Guided Bone Regeneration

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1186
Author(s):  
Lívia da Costa Pereira ◽  
Carlos Fernando de Almeida Barros Mourão ◽  
Adriana Terezinha Neves Novellino Alves ◽  
Rodrigo Figueiredo de Brito Resende ◽  
Marcelo José Pinheiro Guedes de Uzeda ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Chemical Properties ◽  
Chemical Characterization ◽  
Guided Bone Regeneration ◽  
Tissue Reaction ◽  
In Vivo Evaluation ◽  
Physico Chemical ◽  
Tissue Reactions

This study’s aim was to evaluate the biocompatibility and bioabsorption of a new membrane for guided bone regeneration (polylactic-co-glycolic acid associated with hydroxyapatite and β-tricalcium phosphate) with three thicknesses (200, 500, and 700 µm) implanted in mice subcutaneously. Scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and the quantification of carbon, hydrogen and nitrogen were used to characterize the physico-chemical properties. One hundred Balb-C mice were divided into 5 experimental groups: Group 1—Sham (without implantation); Group 2—200 μm; Group 3—500 μm; Group 4—700 μm; and Group 5—Pratix®. Each group was subdivided into four experimental periods (7, 30, 60 and 90 days). Samples were collected and processed for histological and histomorphometrical evaluation. The membranes showed no moderate or severe tissue reactions during the experimental periods studied. The 500-μm membrane showed no tissue reaction during any experimental period. The 200-μm membrane began to exhibit fragmentation after 30 days, while the 500-μm and 700-µm membranes began fragmentation at 90 days. All membranes studied were biocompatible and the 500 µm membrane showed the best results for absorption and tissue reaction, indicating its potential for clinical guided bone regeneration.

scholarly journals Optimization of Innovative Three-Dimensionally-Structured Hybrid Vesicles to Improve the Cutaneous Delivery of Clotrimazole for the Treatment of Topical Candidiasis

Pharmaceutics ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 263 ◽  
Author(s):  
Maria Letizia Manca ◽  
Iris Usach ◽  
José Esteban Peris ◽  
Antonella Ibba ◽  
Germano Orrù ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Properties ◽  
Chemical Characterization ◽  
Yeast Cells ◽  
Unilamellar Vesicles ◽  
Transmission Electron ◽  
Physico Chemical

New three-dimensionally-structured hybrid phospholipid vesicles, able to load clotrimazole in a high amount (10 mg/mL), were obtained for the first time in this work by significantly reducing the amount of water (≤10%), which was replaced with a mixture of glycerol and ethanol (≈90%). A pre-formulation study was carried out to evaluate the effect of both the composition of the hydrating medium and the concentration of the phospholipid on the physico-chemical properties of hybrid vesicles. Four different three-dimensionally-structured hybrid vesicles were selected as ideal systems for the topical application of clotrimazole. An extensive physico-chemical characterization performed using transmission electron microscopy (TEM), cryogenic transmission electron microscopy (cryo-TEM), 31P-NMR, and small-angle X-ray scattering (SAXS) displayed the formation of small, multi-, and unilamellar vesicles very close to each other, and was capable of forming a three-dimensional network, which stabilized the dispersion. Additionally, the dilution of the dispersion with water reduced the interactions between vesicles, leading to the formation of single unilamellar vesicles. The evaluation of the in vitro percutaneous delivery of clotrimazole showed an improved drug deposition in the skin strata provided by the three-dimensionally-structured vesicles with respect to the commercial cream (Canesten®) used as a reference. Hybrid vesicles were highly biocompatible and showed a significant antifungal activity in vitro, greater than the commercial cream Canesten®. The antimycotic efficacy of formulations was confirmed by the reduced proliferation of the yeast cells at the site of infection in vivo. In light of these results, clotrimazole-loaded, three-dimensionally-structured hybrid vesicles appear to be one of the most innovative and promising formulations for the treatment of candidiasis infections.

Zinc concentrations in juvenile flatfish

1979 ◽  
Vol 59 (3) ◽  
pp. 761-775 ◽  
Author(s):  
N. J. Milner
Keyword(s):  
Sea Water ◽  
Chemical Properties ◽  
Estuarine Fish ◽  
Physico Chemical ◽  
Zinc Cadmium ◽  
Iron And Zinc ◽  
Lead Levels ◽  
Zinc Concentrations ◽  
High Concentrations ◽  
Cadmium And Lead

In most demersal and some pelagic marine fish O- and I-group stages are found on inshore nursery grounds which are often situated in coastal indentations and estuarieswhere flushing rates are low and the build up of persistent pollutants can be correspondingly high. Their movements are restricted, only leaving the nursery areas towards the end of their second year (Lockwood, 1974; Riley, 1973). This, coupled with the fact that juveniles may be more susceptible than adults to pollutants, makes them particularly vulnerable to the potential hazards of inshore pollution.The physico-chemical properties of most trace metals, however, generally preclude their occurrence at high concentrations in sea water itself. Instead, most of the metal is transferred to the particulate phase of the water mass and to sedimentary reservoirs (Renfro, 1973) so that concentrations of metals in sea water very rarely reach levels which are known to be acutely toxic to fish. The main risk from direct effects of metals lies in poisoning resulting from internal accumulation.Little information is available on metal concentrations occurring in young fish. Hardisty et al. (1974) and Hardisty, Kartar & Sainsbury (1974) have examined zinc, cadmium and lead levels in O-group and older flounders from the Bristol Channel. Andersen, Dommasnes & Hesthagen (1973) found high concentrations of zinc in O- and I-group herring and sprat from Oslo Fjord, Cross & Brooks (1973) reported on manganese, iron and zinc concentrations in juvenile estuarine fish. Pentreath (1973 b) has reported on zinc concentrations in the organs of I-group plaice.

scholarly journals Synthesis, Principles, and Properties of Magnetite Nanoparticles for In Vivo Imaging Applications—A Review

Pharmaceutics ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 601 ◽  
Author(s):  
Wallyn ◽  
Anton ◽  
Vandamme
Keyword(s):  
Iron Oxide ◽  
Targeted Delivery ◽  
Biomedical Applications ◽  
Colloidal Particles ◽  
Chemical Properties ◽  
Local Drug Delivery ◽  
Physical And Chemical ◽  
Immense Potential ◽  
Drug Nanocarriers

The current nanotechnology era is marked by the emergence of various magnetic inorganic nanometer-sized colloidal particles. These have been extensively applied and hold an immense potential in biomedical applications including, for example, cancer therapy, drug nanocarriers (NCs), or in targeted delivery systems and diagnosis involving two guided-nanoparticles (NPs) as nanoprobes and contrast agents. Considerable efforts have been devoted to designing iron oxide NPs (IONPs) due to their superparamagnetic (SPM) behavior (SPM IONPs or SPIONs) and their large surface-to-volume area allowing more biocompatibility, stealth, and easy bonding to natural biomolecules thanks to grafted ligands, selective-site moieties, and/or organic and inorganic corona shells. Such nanomagnets with adjustable architecture have been the topic of significant progresses since modular designs enable SPIONs to carry out several functions simultaneously such as local drug delivery with real-time monitoring and imaging of the targeted area. Syntheses of SPIONs and adjustments of their physical and chemical properties have been achieved and paved novel routes for a safe use of those tailored magnetic ferrous nanomaterials. Herein we will emphasis a basic notion about NPs magnetism in order to have a better understanding of SPION assets for biomedical applications, then we mainly focus on magnetite iron oxide owing to its outstanding magnetic properties. The general methods of preparation and typical characteristics of magnetite are reviewed, as well as the major biomedical applications of magnetite.

scholarly journals Characterization of Bee Pollen: Physico-Chemical Properties, Headspace Composition and FTIR Spectral Profiles

Foods ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 2103
Author(s):  
Saša Prđun ◽  
Lidija Svečnjak ◽  
Mato Valentić ◽  
Zvonimir Marijanović ◽  
Igor Jerković
Keyword(s):  
Measurement Data ◽  
Chemical Properties ◽  
Chemical Characterization ◽  
Quality Estimation ◽  
Bee Pollen ◽  
Physico Chemical ◽  
Spectral Profiles ◽  
Almost All ◽  
Analytical Tools

Chemical characterization of bee pollen is of great importance for its quality estimation. Multifloral and unifloral bee pollen samples collected from continental, mountain and Adriatic regions of Croatia were analyzed by means of physico-chemical, chromatographic (GC-MS), and spectroscopic (FTIR-ATR) analytical tools, aiming to conduct a comprehensive characterization of bee pollen. The most distinctive unifloral bee pollen with regard to nutritional value was Aesculus hippocastanum (27.26% of proteins), Quercus spp. (52.58% of total sugars), Taraxacumofficinale (19.04% of total lipids), and Prunusavium (3.81% of ash). No statistically significant differences between multifloral and unifloral bee pollen from different regions were found for most of the physico-chemical measurement data, with an exception of melezitose (p = 0.04). Remarkable differences were found among the bee pollen HS VOCs. The major ones were lower aliphatic compounds, monoterpenes (mainly linalool derivatives, especially in Prunusmahaleb and P.avium bee pollen), and benzene derivatives (mainly benzaldehyde in T.officinale and Salix spp.). Aldehydes C9 to C17 were present in almost all samples. FTIR-ATR analysis revealed unique spectral profiles of analyzed bee pollen exhibiting its overall chemical composition arising from molecular vibrations related to major macromolecules—proteins, lipids, and carbohydrates (sugars).

scholarly journals Effect of Aging with Pollution on the Complex Refractive Index of Pure Submicron Clay Particles

2021 ◽  
Vol 8 (1) ◽  
pp. 31
Author(s):  
Sarla Yadav ◽  
Sumit Kumar Mishra
Keyword(s):  
Refractive Index ◽  
Complex Refractive Index ◽  
Chemical Properties ◽  
Radiative Properties ◽  
Submicron Particles ◽  
Visible Range ◽  
Refractive Indices ◽  
Clay Particles ◽  
Physico Chemical ◽  
Refractive Index Data

Modelling the optical and radiative properties of atmospheric particles is governed by one of the key input parameters, i.e., the refractive index of aerosols. Availability of the region-specific refractive index data of aerosols is a major challenge for the atmospheric community. The refractive index of aerosols is a function of their physico-chemical properties. Uncertainty in the computation of the spectral refractive indices of aerosols leads to erroneous assessment of their optical and radiative properties. In the present work, the refractive indices of pure clay (kaolinite, illite) and polluted clay with anthropogenic hematite, AH (0.10 to 1.48%) submicron particles have been computed for the wavelength range of 0.38 to 1.2 µm. Anthropogenic hematite enhanced the overall absorption in the UV and visible range with maximum absorption at lower wavelengths (less than 0.55 µm).

Sign in / Sign up

Export Citation Format

Share Document