scholarly journals Fabrication and In-Vivo Study of Micro-Colloidal Zanthoxylum acanthopodium-Loaded Bacterial Cellulose as a Burn Wound Dressing

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1436 ◽  
Author(s):  
Khatarina Meldawati Pasaribu ◽  
Saharman Gea ◽  
Syafruddin Ilyas ◽  
Tamrin Tamrin ◽  
Appealwan Altruistis Sarumaha ◽  
...  
Keyword(s):  
Bacterial Cellulose ◽  
Wound Dressing ◽  
Healing Process ◽  
Three Dimensional ◽  
Antimicrobial Activities ◽  
Sem Analysis ◽  
Wound Healing Process ◽  
Burn Wound

Bacterial cellulose (BC) is a biopolymer commonly used for wound dressing due to its high biocompatible properties either in-vitro or in-vivo. The three-dimensional fiber structure of BC becomes an advantage because it provides a template for the impregnation of materials in order to improve BC’s properties as a wound dressing, since BC has not displayed any bioactivity properties. In this study, micro-colloidal Zanthoxylum acanthopodium (MZA) fruit was loaded into BC fibers via an in-situ method. Z. acanthopodium is known to have anti-inflammatory, antioxidant and antimicrobial activities that can support BC to accelerate the wound healing process. The FTIR, XRD and SEM analysis results showed that the loading process of MZA and the composite fabrication were successfully carried out. The TGA test also showed that the presence of MZA in BC fibers decreased Tmax composite from BC, from 357.8 to 334.5 °C for BC-MZA3. Other aspects, i.e., water content, porosity, hemocompatibility and histology studies, also showed that the composite could potentially be used as a wound dressing.

scholarly journals Stimulation of wound healing process through ROS/RNS signals indirectly generated by N2/Ar micro-plasma - in vitro and in vivo studies

2015 ◽  
Vol 18 (2) ◽  
pp. 29-37
Author(s):  
Hien Thi Minh Ngo ◽  
Linh Quang Huynh ◽  
Liao Jiunn Der ◽  
Thuy Ngu Son Nguyen
Keyword(s):  
Healing Process ◽  
In Vivo Studies ◽  
Wound Healing Process ◽  
Fibroblast Cells ◽  
Plasma Exposure ◽  
Burn Wound ◽  
Degree Burn ◽  
Plasma Exposure Time

In this work, non-thermal N2/Ar micro-plasma was applied to fibroblast cells and second degree burn in mice to investigate the bio-safety and bioefficiency of micro-plasma device for studying wound healing process. The chosen parameters of the device were the addition of 0.5% N2 in argon plasma and RF supplied power of 17 W and 13 W in vitro and in vivo studies, respectively. Firstly, micro-plasma was applied to fibroblast cells and the induced biological effect was studied in vitro. The result showed that cells number increased three folds for plasma exposure time of 5 or 10 sec, followed by cell culture for 48 hrs. The cell coverage rate rose 20% for the same plasma exposure time, followed by cell culture for 6 or 12 hrs. Secondly, micro-plasma was applied to the second degree burn wound mice, followed by related ex vivo and in vivo assessments. For the former, 0.5% N2/Ar micro-plasma was competent to generate ROS/RNS signals for advancing healing process by the increase of ROS/RNS concentration around the plasma-exposed wound bed. The induced effect is most probably correlated with the angiogenesis and epithelialization processes of the burn wound on mice.

scholarly journals A 3D In Vitro Model for Burn Wounds: Monitoring of Regeneration on the Epidermal Level

Biomedicines ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1153
Author(s):  
Verena Schneider ◽  
Daniel Kruse ◽  
Ives Bernardelli de Mattos ◽  
Saskia Zöphel ◽  
Kendra-Kathrin Tiltmann ◽  
...  
Keyword(s):  
Wound Healing ◽  
Inflammatory Response ◽  
Healing Process ◽  
Three Dimensional ◽  
Source Model ◽  
Burn Wound ◽  
Thermal Burn ◽  
Burn Wounds

Burns affect millions every year and a model to mimic the pathophysiology of such injuries in detail is required to better understand regeneration. The current gold standard for studying burn wounds are animal models, which are under criticism due to ethical considerations and a limited predictiveness. Here, we present a three-dimensional burn model, based on an open-source model, to monitor wound healing on the epidermal level. Skin equivalents were burned, using a preheated metal cylinder. The healing process was monitored regarding histomorphology, metabolic changes, inflammatory response and reepithelialization for 14 days. During this time, the wound size decreased from 25% to 5% of the model area and the inflammatory response (IL-1β, IL-6 and IL-8) showed a comparable course to wounding and healing in vivo. Additionally, the topical application of 5% dexpanthenol enhanced tissue morphology and the number of proliferative keratinocytes in the newly formed epidermis, but did not influence the overall reepithelialization rate. In summary, the model showed a comparable healing process to in vivo, and thus, offers the opportunity to better understand the physiology of thermal burn wound healing on the keratinocyte level.

scholarly journals Biodegradable Electrospun Nonwovens Releasing Propolis as a Promising Dressing Material for Burn Wound Treatment

Pharmaceutics ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 883
Author(s):  
Mateusz Stojko ◽  
Jakub Włodarczyk ◽  
Michał Sobota ◽  
Paulina Karpeta-Jarząbek ◽  
Małgorzata Pastusiak ◽  
...  
Keyword(s):  
Active Compound ◽  
Healing Process ◽  
Mechanical Damage ◽  
Degradation Process ◽  
Molar Ratio ◽  
Wound Healing Process ◽  
Burn Wound ◽  
Burn Wounds

The selection of dressing is crucial for the wound healing process. Traditional dressings protect against contamination and mechanical damage of an injured tissue. Alternatives for standard dressings are regenerating systems containing a polymer with an incorporated active compound. The aim of this research was to obtain a biodegradable wound dressing releasing propolis in a controlled manner throughout the healing process. Dressings were obtained by electrospinning a poly(lactide-co-glycolide) copolymer (PLGA) and propolis solution. The experiment consisted of in vitro drug release studies and in vivo macroscopic treatment evaluation. In in vitro studies released active compounds, the morphology of nonwovens, chemical composition changes of polymeric material during degradation process, weight loss and water absorption were determined. For in vivo research, four domestic pigs, were used. The 21-day experiment consisted of observation of healing third-degree burn wounds supplied with PLGA 85/15 nonwovens without active compound, with 5 wt % and 10 wt % of propolis, and wounds rinsed with NaCl. The in vitro experiment showed that controlling the molar ratio of lactidyl to glycolidyl units in the PLGA copolymer gives the opportunity to change the release profile of propolis from the nonwoven. The in vivo research showed that PLGA nonwovens with propolis may be a promising dressing material in the treatment of severe burn wounds.

Evaluation of a novel bioactive wound dressing: an in vitro and in vivo study

2021 ◽  
Vol 30 (6) ◽  
pp. 482-490
Author(s):  
Fahimeh Farshi Azhar ◽  
Paria Rostamzadeh ◽  
Monireh Khordadmehr ◽  
Mehran Mesgari-Abbasi
Keyword(s):  
Wound Healing ◽  
Wound Dressing ◽  
Healing Process ◽  
Wound Dressings ◽  
Bilayer Film ◽  
Wound Healing Process ◽  
Tissue Contraction ◽  
Experimental Rat Model

Objective: Hard-to-heal wounds, such as pressure ulcers and diabetic ulcers, are a major challenge for wound dressings. The aim of this study was to develop a bioactive dressing based on polymers and natural materials with unique biological and therapeutic properties. Method: The dressing was composed of an active layer containing polyvinyl alcohol (PVA), honey, curcumin and keratin, and an upper layer with lower hydrophilicity comprising PVA to induce flexibility. Physicochemical properties of the dressing were characterised by Fourier transform infrared spectroscopy, field emission scanning electron microscopy, swelling behaviour and antibacterial measurements. A wound healing study was performed using an experimental rat model and two different compositions of the bioactive dressing were compared with a commercial wound dressing (Comfeel, Coloplast, Denmark). Histopathological evaluation was conducted for this purpose. Results: Characterisation results showed that a smooth bilayer film with two homogenous but distinct layers was produced. The dressing also provided adequate moisture to the wound environment without infection and adhesion due to dryness occurring. Our results exhibited significant bactericidal activity against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria and improved the wound healing process without any scarring. Histopathological findings demonstrated a significant higher healing rate in vivo together with well-formed epidermis, granulation tissue formation and tissue contraction, when compared with the commercial wound dressing. Conclusion: Our results demonstrated acceptable physical and healing effects for the novel bioactive wound dressing; however, more investigations are recommended.

scholarly journals RELEVANCE AND PERSPECTIVES OF EXPERIMENTAL WOUND MODELS IN WOUND HEALING RESEARCH

2017 ◽  
Vol 10 (7) ◽  
pp. 57 ◽  
Author(s):  
Santram Lodhi ◽  
Gautam P Vadnere
Keyword(s):  
Wound Healing ◽  
Search Engines ◽  
Wound Repair ◽  
Healing Process ◽  
Chorioallantoic Membrane ◽  
Tube Formation ◽  
Wound Healing Process ◽  
Burn Wound

The wound healing process consists of four highly integrated and overlapping phases: Hemostasis, inflammation, proliferation, and tissue remodeling. These phases and their biophysiological functions must occur in the proper sequence, at a specific time and continue for a specific duration at an optimal intensity. There are many factors that can affect wound healing which interferes with one or more phases in this process, thus causing improper or impaired tissue repair. This review was aimed to collect data and made a critical analysis. This will provide concise information regarding different models and parameters used for wound healing study. The data related to different wound models are collected using popular search engines as well as relevant science search engines and database including Google Scholar, Science Direct, and PubMed. A new drug substance can be evaluated for wound healing activity using different in vitro models such as cell culture, chick chorioallantoic membrane model, tube formation on metrigel and capillary growth model. The in vivo wound models such as incision, excision, dead space, burn wound, ischemic wound, and diabetic wound models are frequently used. Each model has specific importance. The limitations and advantages of each are described in this review. Although animal wound repair is an imperfect reflection of human wound healing and its clinical challenges, these models can be fundamental tools for the development of new approaches to rational wound therapy. 

119 A Nitric Oxide Releasing Bio-active Wound Dressing for Burn Wound Infection Treatment

2020 ◽  
Vol 41 (Supplement_1) ◽  
pp. S79-S80
Author(s):  
Jahnabi Roy ◽  
Lori Estes ◽  
Robert J Christy ◽  
Hitesh Handa ◽  
Shanmugasundaram Natesan
Keyword(s):  
Wound Healing ◽  
Wound Infection ◽  
Wound Dressing ◽  
Healing Process ◽  
Fibroblast Proliferation ◽  
Burn Wound ◽  
Burn Wounds ◽  
Log Reduction

Abstract Introduction The future of multi-domain battlefield operation requires wound dressings to prevent infection at the point of injury. Majority of antimicrobial agents only target wound infection while other healing events are left to their natural fates. Nitric oxide (NO) acts against both gram-positive and -negative bacteria and has the potential to positively affect wound healing. In this study we have developed a novel wound dressing integrated with a NO donor - S-nitroso- glutathione (GSNO) in a hybrid formulation of alginate and poly(vinyl alcohol) (PVA) to prevent/treat burn wound infection. Methods The NO releasing wound dressing was fabricated using PVA, alginate, and glycerol, crosslinked with CaCl2 incorporating GSNO. Thereafter, release kinetics were measured up to 4 days. The antibacterial efficacy was determined against both P. aeruginosa and S. aureus. Then the biocompatibility of the NO wound dressing was assessed using in vitro fibroblast proliferation and wound healing assay. Finally, the efficacy of the wound dressing was assessed in vivo using a 3-cm diameter porcine burn wound infection model. Results The Alginate-PVA-GSNO dressing showed a desired physiological level NO flux of 4.42 × 10-10 mol cm-2 min-1 for 72 hours. Alginate−PVA−GSNO dressings showed ~3 log reduction in S. aureus and ~2 log reduction in P. aeruginosa CFU/mg when compared to control. The NO-releasing dressing improved fibroblast proliferation and migration resulting in complete closure of the wound within 48 h in vitro. The safety and efficacy of NO-releasing dressing were successfully established in the both P. aeruginosa and S. aureus infected porcine burn wounds. Histological assessments are carried out to determine the effect of NO-releasing dressing on overall healing process. Conclusions This study shows Alginate−PVA-GSNO wound dressing provides antimicrobial and wound healing properties in vitro. Preliminary in vivo wound healing studies established the safety and efficacy profile of NO-releasing dressing to treat burn wounds. Applicability of Research to Practice An easy to apply, field deployable and effective antimicrobial wound dressing is still a major requisite for combat burn wounds. NO delivering alginate-PVA based wound dressing may be an ideal candidate to inhibit infection as well as promote the wound healing process.

scholarly journals Development of a Topical Insulin Polymeric Nanoformulation for Skin Burn Regeneration: An Experimental Approach

2021 ◽  
Vol 22 (8) ◽  
pp. 4087
Author(s):  
Maria Quitério ◽  
Sandra Simões ◽  
Andreia Ascenso ◽  
Manuela Carvalheiro ◽  
Ana Paula Leandro ◽  
...  
Keyword(s):  
Wound Healing ◽  
Healing Process ◽  
In Vitro Release ◽  
Peptide Hormone ◽  
Plga Nanoparticles ◽  
Wound Healing Process ◽  
Target Area ◽  
Encapsulation Process

Insulin is a peptide hormone with many physiological functions, besides its use in diabetes treatment. An important role of insulin is related to the wound healing process—however, insulin itself is too sensitive to the external environment requiring the protective of a nanocarrier. Polymer-based nanoparticles can protect, deliver, and retain the protein in the target area. This study aims to produce and characterize a topical treatment for wound healing consisting of insulin-loaded poly-DL-lactide/glycolide (PLGA) nanoparticles. Insulin-loaded nanoparticles present a mean size of approximately 500 nm and neutral surface charge. Spherical shaped nanoparticles are observed by scanning electron microscopy and confirmed by atomic force microscopy. SDS-PAGE and circular dichroism analysis demonstrated that insulin preserved its integrity and secondary structure after the encapsulation process. In vitro release studies suggested a controlled release profile. Safety of the formulation was confirmed using cell lines, and cell viability was concentration and time-dependent. Preliminary safety in vivo assays also revealed promising results.

scholarly journals Keratin Scaffolds Containing Casomorphin Stimulate Macrophage Infiltration and Accelerate Full-Thickness Cutaneous Wound Healing in Diabetic Mice

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2554
Author(s):  
Marek Konop ◽  
Anna K. Laskowska ◽  
Mateusz Rybka ◽  
Ewa Kłodzińska ◽  
Dorota Sulejczak ◽  
...  
Keyword(s):  
Wound Healing ◽  
Wound Dressing ◽  
Healing Process ◽  
Skin Wound ◽  
Wound Healing Process ◽  
Diabetic Mice ◽  
Full Thickness ◽  
Skin Wound Healing ◽  
Impaired Wound Healing

Impaired wound healing is a major medical challenge, especially in diabetics. Over the centuries, the main goal of tissue engineering and regenerative medicine has been to invent biomaterials that accelerate the wound healing process. In this context, keratin-derived biomaterial is a promising candidate due to its biocompatibility and biodegradability. In this study, we evaluated an insoluble fraction of keratin containing casomorphin as a wound dressing in a full-thickness surgical skin wound model in mice (n = 20) with iatrogenically induced diabetes. Casomorphin, an opioid peptide with analgesic properties, was incorporated into keratin and shown to be slowly released from the dressing. An in vitro study showed that keratin-casomorphin dressing is biocompatible, non-toxic, and supports cell growth. In vivo experiments demonstrated that keratin-casomorphin dressing significantly (p < 0.05) accelerates the whole process of skin wound healing to the its final stage. Wounds covered with keratin-casomorphin dressing underwent reepithelization faster, ending up with a thicker epidermis than control wounds, as confirmed by histopathological and immunohistochemical examinations. This investigated dressing stimulated macrophages infiltration, which favors tissue remodeling and regeneration, unlike in the control wounds in which neutrophils predominated. Additionally, in dressed wounds, the number of microhemorrhages was significantly decreased (p < 0.05) as compared with control wounds. The dressing was naturally incorporated into regenerating tissue during the wound healing process. Applied keratin dressing favored reconstruction of more regular skin structure and assured better cosmetic outcome in terms of scar formation and appearance. Our results have shown that insoluble keratin wound dressing containing casomorphin supports skin wound healing in diabetic mice.

In Vivo Testing of Sericin-Polyurethane Nanofiber Mats for Wound Healing in Rats

2017 ◽  
Vol 751 ◽  
pp. 581-585 ◽  
Author(s):  
Piyaporn Kampeerapappun ◽  
Pornpen Siridamrong
Keyword(s):  
Wound Healing ◽  
Healing Process ◽  
Active Agent ◽  
L929 Cell ◽  
Wound Healing Process ◽  
Original Size ◽  
Nanofiber Mats ◽  
Dressing Materials

The objective of this study was to investigate sericin-polyurethane nanofiber cover (SUC) for wound dressing materials in a rat skin. Sericin-polyurethane blended nanofibers were fabricated by using electrospinning. The composition of 3%w/v polyurethane in ethanol and 19% w/v sericin were blended and electrospun at 15 kV, 20 cm from tip to collector with a feed rate of 6.2 ml/hr. The mats, approximately 1.5 mm thick, were sterile by gamma irradiation with a radiation dose of 15 kGy. The samples of in vitro and in vivo testing were separated into three groups; gauze, polyurethane nanofiber cover (UC), and SUC. In vitro cultured L929 cell lines were investigated with inverted microscope. It was found that cells migrated to SCU. For in vivo tests, the remaining wound in rats was measured on day 2-14 after excision. Compared to original size of wound samples, the size of the wound remained 24% for SUC, 33% for gauze, and 34% for UC at day 8. The sericin, an active agent, contained in SUC mats was about 5 µl at 1.5 ×1.5 cm. It can be concluded that sericin is non-toxic to cells and can promote wound healing process in rats.

scholarly journals The Efficacy of Silver-Based Electrospun Antimicrobial Dressing in Accelerating the Regeneration of Partial Thickness Burn Wounds Using a Porcine Model

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3116
Author(s):  
Thien Do ◽  
Tien Nguyen ◽  
Minh Ho ◽  
Nghi Nguyen ◽  
Thai Do ◽  
...  
Keyword(s):  
Wound Healing ◽  
Burn Injury ◽  
Healing Process ◽  
Bactericidal Effect ◽  
Wound Healing Process ◽  
Burn Wounds ◽  
Partial Thickness Burn ◽  
Tissue Damages

(1) Background: Wounds with damages to the subcutaneous are difficult to regenerate because of the tissue damages and complications such as bacterial infection. (2) Methods: In this study, we created burn wounds on pigs and investigated the efficacy of three biomaterials: polycaprolactone-gelatin-silver membrane (PCLGelAg) and two commercial burn dressings, Aquacel® Ag and UrgoTulTM silver sulfadiazine. In vitro long-term antibacterial property and in vivo wound healing performance were investigated. Agar diffusion assays were employed to evaluate bacterial inhibition at different time intervals. Minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and time-kill assays were used to compare antibacterial strength among samples. Second-degree burn wounds in the pig model were designed to evaluate the efficiency of all dressings in supporting the wound healing process. (3) Results: The results showed that PCLGelAg membrane was the most effective in killing both Gram-positive and Gram-negative bacteria bacteria with the lowest MBC value. All three dressings (PCLGelAg, Aquacel, and UrgoTul) exhibited bactericidal effect during the first 24 h, supported wound healing as well as prevented infection and inflammation. (4) Conclusions: The results suggest that the PCLGelAg membrane is a practical solution for the treatment of severe burn injury and other infection-related skin complications.

Sign in / Sign up

Export Citation Format

Share Document