scholarly journals Stimulation of wound healing process through ROS/RNS signals indirectly generated by N2/Ar micro-plasma - in vitro and in vivo studies

2015 ◽  
Vol 18 (2) ◽  
pp. 29-37
Author(s):  
Hien Thi Minh Ngo ◽  
Linh Quang Huynh ◽  
Liao Jiunn Der ◽  
Thuy Ngu Son Nguyen
Keyword(s):  
Healing Process ◽  
In Vivo Studies ◽  
Wound Healing Process ◽  
Fibroblast Cells ◽  
Plasma Exposure ◽  
Burn Wound ◽  
Degree Burn ◽  
Plasma Exposure Time

In this work, non-thermal N2/Ar micro-plasma was applied to fibroblast cells and second degree burn in mice to investigate the bio-safety and bioefficiency of micro-plasma device for studying wound healing process. The chosen parameters of the device were the addition of 0.5% N2 in argon plasma and RF supplied power of 17 W and 13 W in vitro and in vivo studies, respectively. Firstly, micro-plasma was applied to fibroblast cells and the induced biological effect was studied in vitro. The result showed that cells number increased three folds for plasma exposure time of 5 or 10 sec, followed by cell culture for 48 hrs. The cell coverage rate rose 20% for the same plasma exposure time, followed by cell culture for 6 or 12 hrs. Secondly, micro-plasma was applied to the second degree burn wound mice, followed by related ex vivo and in vivo assessments. For the former, 0.5% N2/Ar micro-plasma was competent to generate ROS/RNS signals for advancing healing process by the increase of ROS/RNS concentration around the plasma-exposed wound bed. The induced effect is most probably correlated with the angiogenesis and epithelialization processes of the burn wound on mice.

scholarly journals Biodegradable Electrospun Nonwovens Releasing Propolis as a Promising Dressing Material for Burn Wound Treatment

Pharmaceutics ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 883
Author(s):  
Mateusz Stojko ◽  
Jakub Włodarczyk ◽  
Michał Sobota ◽  
Paulina Karpeta-Jarząbek ◽  
Małgorzata Pastusiak ◽  
...  
Keyword(s):  
Active Compound ◽  
Healing Process ◽  
Mechanical Damage ◽  
Degradation Process ◽  
Molar Ratio ◽  
Wound Healing Process ◽  
Burn Wound ◽  
Burn Wounds

The selection of dressing is crucial for the wound healing process. Traditional dressings protect against contamination and mechanical damage of an injured tissue. Alternatives for standard dressings are regenerating systems containing a polymer with an incorporated active compound. The aim of this research was to obtain a biodegradable wound dressing releasing propolis in a controlled manner throughout the healing process. Dressings were obtained by electrospinning a poly(lactide-co-glycolide) copolymer (PLGA) and propolis solution. The experiment consisted of in vitro drug release studies and in vivo macroscopic treatment evaluation. In in vitro studies released active compounds, the morphology of nonwovens, chemical composition changes of polymeric material during degradation process, weight loss and water absorption were determined. For in vivo research, four domestic pigs, were used. The 21-day experiment consisted of observation of healing third-degree burn wounds supplied with PLGA 85/15 nonwovens without active compound, with 5 wt % and 10 wt % of propolis, and wounds rinsed with NaCl. The in vitro experiment showed that controlling the molar ratio of lactidyl to glycolidyl units in the PLGA copolymer gives the opportunity to change the release profile of propolis from the nonwoven. The in vivo research showed that PLGA nonwovens with propolis may be a promising dressing material in the treatment of severe burn wounds.

scholarly journals RELEVANCE AND PERSPECTIVES OF EXPERIMENTAL WOUND MODELS IN WOUND HEALING RESEARCH

2017 ◽  
Vol 10 (7) ◽  
pp. 57 ◽  
Author(s):  
Santram Lodhi ◽  
Gautam P Vadnere
Keyword(s):  
Wound Healing ◽  
Search Engines ◽  
Wound Repair ◽  
Healing Process ◽  
Chorioallantoic Membrane ◽  
Tube Formation ◽  
Wound Healing Process ◽  
Burn Wound

The wound healing process consists of four highly integrated and overlapping phases: Hemostasis, inflammation, proliferation, and tissue remodeling. These phases and their biophysiological functions must occur in the proper sequence, at a specific time and continue for a specific duration at an optimal intensity. There are many factors that can affect wound healing which interferes with one or more phases in this process, thus causing improper or impaired tissue repair. This review was aimed to collect data and made a critical analysis. This will provide concise information regarding different models and parameters used for wound healing study. The data related to different wound models are collected using popular search engines as well as relevant science search engines and database including Google Scholar, Science Direct, and PubMed. A new drug substance can be evaluated for wound healing activity using different in vitro models such as cell culture, chick chorioallantoic membrane model, tube formation on metrigel and capillary growth model. The in vivo wound models such as incision, excision, dead space, burn wound, ischemic wound, and diabetic wound models are frequently used. Each model has specific importance. The limitations and advantages of each are described in this review. Although animal wound repair is an imperfect reflection of human wound healing and its clinical challenges, these models can be fundamental tools for the development of new approaches to rational wound therapy. 

scholarly journals Fabrication and In-Vivo Study of Micro-Colloidal Zanthoxylum acanthopodium-Loaded Bacterial Cellulose as a Burn Wound Dressing

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1436 ◽  
Author(s):  
Khatarina Meldawati Pasaribu ◽  
Saharman Gea ◽  
Syafruddin Ilyas ◽  
Tamrin Tamrin ◽  
Appealwan Altruistis Sarumaha ◽  
...  
Keyword(s):  
Bacterial Cellulose ◽  
Wound Dressing ◽  
Healing Process ◽  
Three Dimensional ◽  
Antimicrobial Activities ◽  
Sem Analysis ◽  
Wound Healing Process ◽  
Burn Wound

Bacterial cellulose (BC) is a biopolymer commonly used for wound dressing due to its high biocompatible properties either in-vitro or in-vivo. The three-dimensional fiber structure of BC becomes an advantage because it provides a template for the impregnation of materials in order to improve BC’s properties as a wound dressing, since BC has not displayed any bioactivity properties. In this study, micro-colloidal Zanthoxylum acanthopodium (MZA) fruit was loaded into BC fibers via an in-situ method. Z. acanthopodium is known to have anti-inflammatory, antioxidant and antimicrobial activities that can support BC to accelerate the wound healing process. The FTIR, XRD and SEM analysis results showed that the loading process of MZA and the composite fabrication were successfully carried out. The TGA test also showed that the presence of MZA in BC fibers decreased Tmax composite from BC, from 357.8 to 334.5 °C for BC-MZA3. Other aspects, i.e., water content, porosity, hemocompatibility and histology studies, also showed that the composite could potentially be used as a wound dressing.

scholarly journals Healing Efficacy of an EGF Impregnated Triple Gel Based Wound Dressing: In Vitro and In Vivo Studies

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Najmeh Khanbanha ◽  
Fatemeh Atyabi ◽  
Azade Taheri ◽  
Fatemeh Talaie ◽  
Mirgholamreza Mahbod ◽  
...  
Keyword(s):  
Wound Healing ◽  
Topical Application ◽  
Healing Process ◽  
Tissue Growth ◽  
In Vivo Studies ◽  
Wound Healing Process ◽  
Beneficial Effects ◽  
Linear Viscoelastic

To accomplish an ideal wound healing process which promotes healthy tissue growth with less scaring, a novel gel based topical drug delivery system composed of 3 different polymers chitosan, dextran sulfate, and polyvinylpyrrolidone K30 (CDP) was prepared. The physicochemical properties of the prepared gels were investigated in vitro. Gels showed a maximum swelling ratio of 50 ± 1.95 times of dried gel in PBS at pH 7.4. The swelling ratios increase in acidic and alkaline pH to 55.3 ± 1.75 and 65.5 ± 2.42, respectively. In the rheological test, prepared gels revealed viscoelastic properties and a small linear viscoelastic region of 0.166%. In vivo wound healing promoting activities of CDP gels containing 20 μg/mL EGF were evaluated on surgically induced dermal wounds in rats using pathologic examination. The application of CDP gel with incorporated EGF significantly reduced the defect on the rat’s skin and enhanced epithelial healing compared with the topical application of the EGF-free CDP gel. The results clearly substantiate the beneficial effects of the topical application of CDP containing EGF in the acceleration of healthy wound healing process with less scarring.

scholarly journals Development of a Topical Insulin Polymeric Nanoformulation for Skin Burn Regeneration: An Experimental Approach

2021 ◽  
Vol 22 (8) ◽  
pp. 4087
Author(s):  
Maria Quitério ◽  
Sandra Simões ◽  
Andreia Ascenso ◽  
Manuela Carvalheiro ◽  
Ana Paula Leandro ◽  
...  
Keyword(s):  
Wound Healing ◽  
Healing Process ◽  
In Vitro Release ◽  
Peptide Hormone ◽  
Plga Nanoparticles ◽  
Wound Healing Process ◽  
Target Area ◽  
Encapsulation Process

Insulin is a peptide hormone with many physiological functions, besides its use in diabetes treatment. An important role of insulin is related to the wound healing process—however, insulin itself is too sensitive to the external environment requiring the protective of a nanocarrier. Polymer-based nanoparticles can protect, deliver, and retain the protein in the target area. This study aims to produce and characterize a topical treatment for wound healing consisting of insulin-loaded poly-DL-lactide/glycolide (PLGA) nanoparticles. Insulin-loaded nanoparticles present a mean size of approximately 500 nm and neutral surface charge. Spherical shaped nanoparticles are observed by scanning electron microscopy and confirmed by atomic force microscopy. SDS-PAGE and circular dichroism analysis demonstrated that insulin preserved its integrity and secondary structure after the encapsulation process. In vitro release studies suggested a controlled release profile. Safety of the formulation was confirmed using cell lines, and cell viability was concentration and time-dependent. Preliminary safety in vivo assays also revealed promising results.

In Vivo Testing of Sericin-Polyurethane Nanofiber Mats for Wound Healing in Rats

2017 ◽  
Vol 751 ◽  
pp. 581-585 ◽  
Author(s):  
Piyaporn Kampeerapappun ◽  
Pornpen Siridamrong
Keyword(s):  
Wound Healing ◽  
Healing Process ◽  
Active Agent ◽  
L929 Cell ◽  
Wound Healing Process ◽  
Original Size ◽  
Nanofiber Mats ◽  
Dressing Materials

The objective of this study was to investigate sericin-polyurethane nanofiber cover (SUC) for wound dressing materials in a rat skin. Sericin-polyurethane blended nanofibers were fabricated by using electrospinning. The composition of 3%w/v polyurethane in ethanol and 19% w/v sericin were blended and electrospun at 15 kV, 20 cm from tip to collector with a feed rate of 6.2 ml/hr. The mats, approximately 1.5 mm thick, were sterile by gamma irradiation with a radiation dose of 15 kGy. The samples of in vitro and in vivo testing were separated into three groups; gauze, polyurethane nanofiber cover (UC), and SUC. In vitro cultured L929 cell lines were investigated with inverted microscope. It was found that cells migrated to SCU. For in vivo tests, the remaining wound in rats was measured on day 2-14 after excision. Compared to original size of wound samples, the size of the wound remained 24% for SUC, 33% for gauze, and 34% for UC at day 8. The sericin, an active agent, contained in SUC mats was about 5 µl at 1.5 ×1.5 cm. It can be concluded that sericin is non-toxic to cells and can promote wound healing process in rats.

scholarly journals The Efficacy of Silver-Based Electrospun Antimicrobial Dressing in Accelerating the Regeneration of Partial Thickness Burn Wounds Using a Porcine Model

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3116
Author(s):  
Thien Do ◽  
Tien Nguyen ◽  
Minh Ho ◽  
Nghi Nguyen ◽  
Thai Do ◽  
...  
Keyword(s):  
Wound Healing ◽  
Burn Injury ◽  
Healing Process ◽  
Bactericidal Effect ◽  
Wound Healing Process ◽  
Burn Wounds ◽  
Partial Thickness Burn ◽  
Tissue Damages

(1) Background: Wounds with damages to the subcutaneous are difficult to regenerate because of the tissue damages and complications such as bacterial infection. (2) Methods: In this study, we created burn wounds on pigs and investigated the efficacy of three biomaterials: polycaprolactone-gelatin-silver membrane (PCLGelAg) and two commercial burn dressings, Aquacel® Ag and UrgoTulTM silver sulfadiazine. In vitro long-term antibacterial property and in vivo wound healing performance were investigated. Agar diffusion assays were employed to evaluate bacterial inhibition at different time intervals. Minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and time-kill assays were used to compare antibacterial strength among samples. Second-degree burn wounds in the pig model were designed to evaluate the efficiency of all dressings in supporting the wound healing process. (3) Results: The results showed that PCLGelAg membrane was the most effective in killing both Gram-positive and Gram-negative bacteria bacteria with the lowest MBC value. All three dressings (PCLGelAg, Aquacel, and UrgoTul) exhibited bactericidal effect during the first 24 h, supported wound healing as well as prevented infection and inflammation. (4) Conclusions: The results suggest that the PCLGelAg membrane is a practical solution for the treatment of severe burn injury and other infection-related skin complications.

scholarly journals Systemic and topical administration of spermidine accelerates skin wound healing

2020 ◽  
Author(s):  
Daisuke Ito ◽  
Hiroyasu Ito ◽  
Takayasu Ideta ◽  
Ayumu Kanbe ◽  
Soranobu Ninomiya ◽  
...  
Keyword(s):  
Cell Proliferation ◽  
Wound Healing ◽  
Wound Repair ◽  
Healing Process ◽  
Topical Administration ◽  
Skin Wound ◽  
Wound Healing Process ◽  
Skin Wound Healing

Abstract Background The skin wound healing process is regulated by various cytokines, chemokines, and growth factors. Recent reports have demonstrated that spermine/spermidine (SPD) promote wound healing through urokinase-type plasminogen activator (uPA)/uPA receptor (uPAR) signaling in vitro. Here, we investigated whether the systemic and topical administration of SPD would accelerate the skin wound-repair process in vivo.Methods A skin wound repair model was established using C57BL/6 J mice. SPD was mixed with white petrolatum for topical administration. For systemic administration, SPD mixed with drinking water was orally administered. Changes in wound size over time were calculated using digital photography.Results Systemic and topical SPD treatment significantly accelerated skin wound healing. The administration of SPD promoted the uPA/uPAR pathway in wound sites. Moreover, topical treatment with SPD enhanced the expression of IL-6 and TNF-α in wound sites. Scratch and cell proliferation assays revealed that SPD administration accelerated scratch wound closure and cell proliferation in vitro.Conclusion These results indicate that treatment with SPD promotes skin wound healing through activation of the uPA/uPAR pathway and induction of the inflammatory response in wound sites. The administration of SPD might contribute to new effective treatments to accelerate skin wound healing.

scholarly journals A 3D In Vitro Model for Burn Wounds: Monitoring of Regeneration on the Epidermal Level

Biomedicines ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1153
Author(s):  
Verena Schneider ◽  
Daniel Kruse ◽  
Ives Bernardelli de Mattos ◽  
Saskia Zöphel ◽  
Kendra-Kathrin Tiltmann ◽  
...  
Keyword(s):  
Wound Healing ◽  
Inflammatory Response ◽  
Healing Process ◽  
Three Dimensional ◽  
Source Model ◽  
Burn Wound ◽  
Thermal Burn ◽  
Burn Wounds

Burns affect millions every year and a model to mimic the pathophysiology of such injuries in detail is required to better understand regeneration. The current gold standard for studying burn wounds are animal models, which are under criticism due to ethical considerations and a limited predictiveness. Here, we present a three-dimensional burn model, based on an open-source model, to monitor wound healing on the epidermal level. Skin equivalents were burned, using a preheated metal cylinder. The healing process was monitored regarding histomorphology, metabolic changes, inflammatory response and reepithelialization for 14 days. During this time, the wound size decreased from 25% to 5% of the model area and the inflammatory response (IL-1β, IL-6 and IL-8) showed a comparable course to wounding and healing in vivo. Additionally, the topical application of 5% dexpanthenol enhanced tissue morphology and the number of proliferative keratinocytes in the newly formed epidermis, but did not influence the overall reepithelialization rate. In summary, the model showed a comparable healing process to in vivo, and thus, offers the opportunity to better understand the physiology of thermal burn wound healing on the keratinocyte level.

Sign in / Sign up

Export Citation Format

Share Document