scholarly journals Polysaccharides as Support for Microbial Biomass-Based Adsorbents with Applications in Removal of Heavy Metals and Dyes

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2893
Author(s):  
Alexandra Cristina Blaga ◽  
Carmen Zaharia ◽  
Daniela Suteu
Keyword(s):  
Heavy Metals ◽  
Microbial Biomass ◽  
Rapid Development ◽  
Industrial Effluent ◽  
Effluent Treatment ◽  
Mechanical Resistance ◽  
Polymeric Support ◽  
Natural Polymers ◽  
Good Efficiency ◽  
Efficient Treatment

The use of biosorbents for the decontamination of industrial effluent (e.g., wastewater treatment) by retaining non-biodegradable pollutants (antibiotics, dyes, and heavy metals) has been investigated in order to develop inexpensive and effective techniques. The exacerbated water pollution crisis is a huge threat to the global economy, especially in association with the rapid development of industry; thus, the sustainable reuse of different treated water resources has become a worldwide necessity. This review investigates the use of different natural (living and non-living) microbial biomass types containing polysaccharides, proteins, and lipids (natural polymers) as biosorbents in free and immobilized forms. Microbial biomass immobilization performed by using polymeric support (i.e., polysaccharides) would ensure the production of efficient biosorbents, with good mechanical resistance and easy separation ability, utilized in different effluents’ depollution. Biomass-based biosorbents, due to their outstanding biosorption abilities and good efficiency for effluent treatment (concentrated or diluted solutions of residuals/contaminants), need to be used in industrial environmental applications, to improve environmental sustainability of the economic activities. This review presents the most recent advances related the main polymers such as polysaccharides and microbial cells used for biosorbents production; a detailed analysis of the biosorption capability of algal, bacterial and fungal biomass; as well as a series of specific applications for retaining metal ions and organic dyes. Even if biosorption offers many advantages, the complexity of operation increased by the presence of multiple pollutants in real wastewater combined with insufficient knowledge on desorption and regeneration capacity of biosorbents (mostly used in laboratory scale) requires more large-scale biosorption experiments in order to adequately choose a type of biomass but also a polymeric support for an efficient treatment process.

scholarly journals Treatment of Common Effluent Treatment Plant Pollutant under Growing & Non-growing Condition of Biomass

2020 ◽  
pp. 15-21
Author(s):  
Shipra Jha ◽  
S. N. Dikshit
Keyword(s):  
Heavy Metals ◽  
Environmental Concern ◽  
Industrial Effluent ◽  
Treatment Plant ◽  
Industrial Effluents ◽  
Industrial Applications ◽  
Effluent Treatment ◽  
Effluent Treatment Plant ◽  
Living Tissues ◽  
Incomplete Treatment

Heavy metal pollution in wastewater has always been a serious environmental problem because heavy metals are not biodegradable and can be accumulated in living tissues. Copper is widely used in various important industrial applications. The increasing level of heavy metals in the aquatic system due to incomplete treatment of industrial wastewater by existing conventional methods is of environmental concern. Therefore, there has been an increasing interest in the possibility of using biological treatments. It is important to evaluate the performance of biomass with actual industrial effluent to ensure its field applicability. Hence the experiments were conducted with actual industrial effluents collected from Effluent Treatment Plant (ETP) and tannery industry.

scholarly journals AN ALTERNATIVE APPROACH ON BIOREMEDIATION OF HEAVY METALS IN TANNERY EFFLUENTS WASTE USING STREPTOMYCES SP.

2017 ◽  
Vol 10 (10) ◽  
pp. 323
Author(s):  
Thirumurugan D ◽  
Ibrahim Adamu Karfi ◽  
Vijayakumar R ◽  
Nithya Tg
Keyword(s):  
Heavy Metals ◽  
Incubation Period ◽  
Metal Ion ◽  
Industrial Effluent ◽  
Treatment Plant ◽  
Ion Concentration ◽  
Effluent Treatment ◽  
Tannery Effluent ◽  
Streptomyces Sp ◽  
Reducing Ability

  Objective: The present study is conducted to investigate the abilities of microorganisms to degrade heavy metals in industrial tannery effluent sample.Methods: Tannery effluent sample was collected from effluent treatment plant and analyzed for physicochemical parameters. The potential microbes were isolated and identified by morphological and biochemical characterization. The sample was analyzed before and after to assess the heavy metal reducing the ability of the microorganism and the respective percentage of reduction were studied using X-ray fluorescence spectrometry.Results: The samples were initially found to be highly contaminated with chromium, nickel, and cadmium. Out of three potential isolates, the isolate Streptomyces sp. was found to exhibit a better reduction against chromium (25.7%), cadmium (14.6%), and nickel (23.1%) in 50 ppm at longer incubation period. Comparatively, the reduction abilities of all the three isolates against all the three heavy metals increased with the increase in the incubation period but decreased with the increase in initial metal ion concentration except in the case of Streptomyces sp. against nickel where the reducing ability increased with the increase in metal concentration.Conclusion: Apparently, the present study revealed that Streptomyces sp. had a better remediation potential than the indigenous Pseudomonas sp. and Aspergillus sp. Ultimately, the finding of this research has shown that the Streptomyces sp. can be used as a potent bioremediation agent for treating tannery and industrial effluent in an eco-friendly process.

scholarly journals Transcutaneous Drug Delivery Systems Based on Collagen/Polyurethane Composites Reinforced with Cellulose

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1845
Author(s):  
Narcis Anghel ◽  
Valentina Maria Dinu ◽  
Liliana Verestiuc ◽  
Irene Alexandra Spiridon
Keyword(s):  
Drug Delivery ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Metal Complex ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Fickian Diffusion ◽  
Mechanical Resistance ◽  
Natural Polymers ◽  
Transcutaneous Drug Delivery

Designing composites based on natural polymers has attracted attention for more than a decade due to the possibility to manufacture medical devices which are biocompatible with the human body. Herein, we present some biomaterials made up of collagen, polyurethane, and cellulose doped with lignin and lignin-metal complex, which served as transcutaneous drug delivery systems. Compared with base material, the compressive strength and the elastic modulus of biocomposites comprising lignin or lignin-metal complex were significantly enhanced; thus, the compressive strength increased from 61.37 to 186.5 kPa, while the elastic modulus increased from 0.828 to 1.928 MPa. The release of ketokonazole from the polymer matrix follows a Korsmeyer–Peppas type kinetics with a Fickian diffusion. All materials tested were shown to be active against pathogenic microorganisms. The mucoadhesiveness, bioadhesiveness, mechanical resistance, release kinetic, and antimicrobial activity make these biocomposites to be candidates as potential systems for controlled drug release.

Assessment of Heavy Metals Pollution in Sediments from Aha Lake, China

2012 ◽  
Vol 554-556 ◽  
pp. 1913-1918
Author(s):  
Feng Liu ◽  
Ji Wei Hu ◽  
Xian Fei Huang ◽  
Jing An Chen ◽  
Li Ya Fu ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Industrial Effluent ◽  
Principal Component ◽  
Secondary Phase ◽  
Primary Phase ◽  
Point Source Pollution ◽  
Residual Phase ◽  
Heavy Metals Contamination ◽  
Mining Wastewater ◽  
Aha Lake

Assessment of the pollution for the selected six heavy metals (Pb, Cu, Zn, Fe, Mn and Ni) in ten surface sediments sampled from Aha Lake in a dry season was made in the present investigation. Principal component analysis (PCA) was used to assess the sources of the heavy metals contamination and two components were extracted. Analysis of the lake characteristics and point source pollution revealed that the discharge of industrial effluent and coal mining wastewater were the possible sources of these heavy metals contamination. Based on the speciation characteristics of heavy metals in sediments, the method ratio of secondary phase to primary phase (RSP) was applied to evaluate the loadings and the bioavailability of these heavy metals. The RSP evaluation exhibited that Pb, Zn, Fe, Mn and Ni were mainly associated with Fe-Mn oxides besides residual phase, while Cu mainly existed in organic phase and residual phase. In summary, the potential risk posed to the lake caused by the heavy metals was high and descended in the order of Mn > Ni > Zn > Pb > Cu > Fe.

Soft Drinks Industry Wastewater Treatment

1992 ◽  
Vol 25 (1) ◽  
pp. 45-51 ◽  
Author(s):  
Larbi Tebai ◽  
Ioannis Hadjivassilis
Keyword(s):  
Biological Treatment ◽  
Industrial Effluent ◽  
Treatment Plant ◽  
Soft Drinks ◽  
Effluent Treatment ◽  
Production Lines ◽  
Effluent Treatment Plant ◽  
Industrial Effluent Treatment ◽  
Effluent Characteristics ◽  
Industry Wastewater

Soft drinks industry wastewater from various production lines is discharged into the Industrial Effluent Treatment Plant. The traditional coagulation/flocculation method as first step, followed by biological treatment as second step, has been adopted for treating the soft drinks industry wastewaters. The performance of the plant has been evaluated. It has been found that the effluent characteristics are in most cases in correspondence with the requested standards for discharging the effluent into the Nicosia central sewerage system.

scholarly journals Ultrasonic, Molecular and Mechanical Testing Diagnostics in Natural Fibre Reinforced, Polymer-Stabilized Earth Blocks

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
C. Galán-Marín ◽  
C. Rivera-Gómez ◽  
F. Bradley
Keyword(s):  
Soil Stabilization ◽  
Ultrasonic Pulse Velocity ◽  
Mechanical Tests ◽  
Pulse Velocity ◽  
Mechanical Resistance ◽  
Chemical Compositions ◽  
Natural Polymer ◽  
Natural Polymers ◽  
X Ray ◽  
Earth Blocks

The aim of this research study was to evaluate the influence of utilising natural polymers as a form of soil stabilization, in order to assess their potential for use in building applications. Mixtures were stabilized with a natural polymer (alginate) and reinforced with wool fibres in order to improve the overall compressive and flexural strength of a series of composite materials. Ultrasonic pulse velocity (UPV) and mechanical strength testing techniques were then used to measure the porous properties of the manufactured natural polymer-soil composites, which were formed into earth blocks. Mechanical tests were carried out for three different clays which showed that the polymer increased the mechanical resistance of the samples to varying degrees, depending on the plasticity index of each soil. Variation in soil grain size distributions and Atterberg limits were assessed and chemical compositions were studied and compared. X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), and energy dispersive X-ray fluorescence (EDXRF) techniques were all used in conjunction with qualitative identification of the aggregates. Ultrasonic wave propagation was found to be a useful technique for assisting in the determination of soil shrinkage characteristics and fibre-soil adherence capacity and UPV results correlated well with the measured mechanical properties.

Removal of Heavy Metals from Industrial Effluent by Crossflow Microfiltration

1992 ◽  
Vol 25 (10) ◽  
pp. 55-67 ◽  
Author(s):  
R. C. Squires
Keyword(s):  
Heavy Metals ◽  
Pilot Trial ◽  
Industrial Effluent ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Sodium Sulphate ◽  
The Other ◽  
Operating Costs ◽  
Treated Effluent ◽  
Crossflow Microfiltration

The performance of Exxflow, a patented form of crossflow microfiltration, treating industrial wastewaters containing mixed heavy metals discharged by two types of industry is quantified and compared with the traditional technologies used for such treatment. Pilot trial results using Exxflow are shown and compared to the performance of the full scale plants now operating on these effluents. The operating costs of the Exxflow process are estimated for the two plants. One of which has been operating for 18 months and the other about 4 months. The Exxflow process is described and improvements which are being developed to lower the operating costs are presented. It is shown that industrial effluents containing mixed heavy metals are very effectively treated by the Exxflow process and since the installation of the plants the treated effluent has been of a quality suitable for discharge to the River Thames in one case and to a sewage treatment plant in the other. Unlike other processes, Exxflow has shown that it can successfully treat effluent containing mixed metals and that removal of antimony from mixed metal waste waters is affected by the concentration of sodium sulphate in the wastewater.

Sign in / Sign up

Export Citation Format

Share Document