scholarly journals Functionalization of Graphene Oxide with Polysilicone: Synthesis, Characterization, and Its Flame Retardancy in Epoxy Resin

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3857
Author(s):  
Jiangbo Wang
Keyword(s):  
Graphene Oxide ◽  
Heat Release ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Mechanical Analysis ◽  
Silica Layer ◽  
Atomic Force ◽  
Peak Heat Release Rate ◽  
Ep Matrix ◽  
The Fourier Transform

A novel polysilicone flame retardant (PMDA) has been synthesized and covalently grafted onto the surfaces of graphene oxide (GO) to obtain GO-PMDA. The chemical structure and morphology of GO-PMDA was characterized and confirmed by the Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectrometer (XPS), atomic force microscope (AFM), and thermogravimetric analysis (TGA). The results of dynamic mechanical analysis (DMA) indicated that the grafting of PMDA improved the dispersion and solubility of GO sheets in the epoxy resin (EP) matrix. The TGA and cone calorimeter measurements showed that compared with the GO, GO-PMDA could significantly improve the thermal stability and flame retardancy of EP. In comparison to pure EP, the peak heat release rate (pHRR) and total heat release (THR) of EP/GO-PMDA were reduced by 30.5% and 10.0% respectively. This greatly enhanced the flame retardancy of EP which was mainly attributed to the synergistic effect of GO-PMDA. Polysilicone can create a stable silica layer on the char surface of EP, which reinforces the barrier effect of graphene.

scholarly journals One-Step Reduction of Graphene Oxide with Phosphorus/Silicon-Containing Compound and Its Flame Retardancy in Epoxy Resin

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3985
Author(s):  
Fangyi Wu ◽  
Xiaohui Bao ◽  
Jiangbo Wang
Keyword(s):  
Graphene Oxide ◽  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Silicon Layer ◽  
Atomic Force ◽  
Peak Heat Release Rate ◽  
High Efficient ◽  
One Step ◽  
The Fourier Transform

A novel graphene-based phosphorus/silicon-containing flame retardant (GO-DOPO-V) was obtained via one-step reduction of graphene oxide (GO) with phosphorus/silicon-containing compound (DOPO-V). The Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectrometer (XPS), Atomic force microscope (AFM) and Thermogravimetric analysis (TGA) measurements were used to confirm the structure and morphology. After incorporation of 2 wt% GO-DOPO-V, the maximum decreases of 28.8% in peak heat release rate and 15.6% in total heat release are achieved compared to that of pure epoxy resin (EP). Furthermore, TGA and Scanning electron microscopy (SEM) measurement showed that GO-DOPO-V significantly enhanced the thermal stability and residual char strength of EP. Thus, attributed to the barrier effect of GO and phosphorus/silicon layer formation by DOPO-V, GO-DOPO-V was a high-efficient flame retardant to improve the combustion behavior of EP nanocomposite.

Synthesis and characterization of flame-retardant-wrapped carbon nanotubes and its flame retardancy in epoxy nanocomposites

2021 ◽  
pp. 096739112110245
Author(s):  
Jiangbo Wang
Keyword(s):  
Carbon Nanotubes ◽  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Total Heat Release ◽  
Pristine Cnts ◽  
Peak Heat Release Rate ◽  
Ep Matrix ◽  
Better Than

A novel phosphorus-silicon containing flame-retardant DOPO-V-PA was used to wrap carbon nanotubes (CNTs). The results of FTIR, XPS, TEM and TGA measurements exhibited that DOPO-V-PA has been successfully grafted onto the surfaces of CNTs, and the CNTs-DOPO-V-PA was obtained. The CNTs-DOPO-V-PA was subsequently incorporated into epoxy resin (EP) for improving the flame retardancy and dispersion. Compared with pure EP, the addition of 2 wt% CNTs-DOPO-V-PA into the EP matrix could achieve better flame retardancy of EP nanocomposites, such as a 30.5% reduction in peak heat release rate (PHRR) and 8.1% reduction in total heat release (THR). Furthermore, DMTA results clearly indicated that the dispersion for CNTs-DOPO-V-PA in EP matrix was better than pristine CNTs.

scholarly journals Dual UV-Thermal Curing of Biobased Resorcinol Epoxy Resin-Diatomite Composites with Improved Acoustic Performance and Attractive Flame Retardancy Behavior

2021 ◽  
Vol 2 (1) ◽  
pp. 24-48
Author(s):  
Quoc-Bao Nguyen ◽  
Henri Vahabi ◽  
Agustín Rios de Anda ◽  
Davy-Louis Versace ◽  
Valérie Langlois ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Sound Absorption ◽  
Flexural Modulus ◽  
Construction Materials ◽  
Acoustic Properties ◽  
Low Frequencies ◽  
Compacting Pressure

This study has developed novel fully bio-based resorcinol epoxy resin–diatomite composites by a green two-stage process based on the living character of the cationic polymerization. This process comprises the photoinitiation and subsequently the thermal dark curing, enabling the obtaining of thick and non-transparent epoxy-diatomite composites without any solvent and amine-based hardeners. The effects of the diatomite content and the compacting pressure on microstructural, thermal, mechanical, acoustic properties, as well as the flame behavior of such composites have been thoroughly investigated. Towards the development of sound absorbing and flame-retardant construction materials, a compromise among mechanical, acoustic and flame-retardant properties was considered. Consequently, the composite obtained with 50 wt.% diatomite and 3.9 MPa compacting pressure is considered the optimal composite in the present work. Such composite exhibits the enhanced flexural modulus of 2.9 MPa, a satisfying sound absorption performance at low frequencies with Modified Sound Absorption Average (MSAA) of 0.08 (for a sample thickness of only 5 mm), and an outstanding flame retardancy behavior with the peak of heat release rate (pHRR) of 109 W/g and the total heat release of 5 kJ/g in the pyrolysis combustion flow calorimeter (PCFC) analysis.

Synthesis of a phosphorus–nitrogen-containing flame retardant and its application in epoxy resin

2018 ◽  
Vol 31 (2) ◽  
pp. 186-196 ◽  
Author(s):  
Shuang Yang ◽  
Yefa Hu ◽  
Qiaoxin Zhang
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Epoxy Resins ◽  
Proton Nuclear Magnetic Resonance ◽  
Scanning Calorimetry ◽  
Cone Calorimeter Test

In this article, a phosphorus–nitrogen-containing flame retardant (DOPO-T) was successfully synthesized by nucleophilic substitution reaction between 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and cyanuric chloride. The chemical structure of DOPO-T was characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (NMR) and phosphorous-31 NMR, and elemental analysis. DOPO-T was then blended with diglycidyl ether of bisphenol-A to prepare flame-retardant epoxy resins. Thermal properties, flame retardancy, and combustion behavior of the cured epoxy resins were evaluated by differential scanning calorimetry, thermogravimetric analysis, limited oxygen index (LOI) measurement, UL94 vertical burning test, and cone calorimeter test. The results indicated that the glass transition temperature ( Tg) and temperature at 5% weight loss of epoxy resin (EP)/DOPO-T thermosets were gradually decreased with the increasing content of DOPO-T. DOPO-T catalyzed the decomposition of EP matrix in advance. The flame-retardant performance of EP thermosets was significantly enhanced with the addition of DOPO-T. EP/DOPO-T-0.9 sample had an LOI value of 36.2% and achieved UL94 V-1 rating. In addition, the average of heat release rate, peak of heat release rate, average of effective heat of combustion, and total heat release (THR) of EP/DOPO-T-0.9 sample were decreased by 32%, 48%, 23%, and 31%, respectively, compared with the neat EP sample. Impressively, EP/DOPO-T thermosets acquired excellent flame retardancy under low loading of flame retardant.

scholarly journals Synthesis of modified graphene oxide and its improvement on flame retardancy of epoxy resin

2019 ◽  
Vol 137 (1) ◽  
pp. 47710 ◽  
Author(s):  
Wenqian Wu ◽  
Yiting Xu ◽  
Haiyang Wu ◽  
Jinmei Chen ◽  
Min Li ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Modified Graphene Oxide ◽  
Modified Graphene

scholarly journals Synergistic Flame Retardant Effect of Barium Phytate and Intumescent Flame Retardant for Epoxy Resin

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2900
Author(s):  
Linyuan Wang ◽  
Yue Wei ◽  
Hongbo Deng ◽  
Ruiqi Lyu ◽  
Jiajie Zhu ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Barium Carbonate ◽  
Environmentally Friendly ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Application Range ◽  
Peak Heat Release Rate ◽  
Synergistic Flame Retardant

Recently, widespread concern has been aroused on environmentally friendly materials. In this article, barium phytate (Pa-Ba) was prepared by the reaction of phytic acid with barium carbonate in deionized water, which was used to blend with intumescent flame retardant (IFR) as a flame retardant and was added to epoxy resin (EP). Afterward, the chemical structure and thermal stability of Pa-Ba were characterized by Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA), respectively. On this basis, the flammability and flame retardancy of EP composites were researched. It is shown that EP/14IFR/2Ba composite has the highest limiting oxygen index (LOI) value of 30.7%. Moreover, the peak heat release rate (PHRR) of EP/14IFR/2Ba decreases by 69.13% compared with pure EP. SEM and Raman spectra reveal the carbonization quality of EP/14IFR/2Ba is better than that of other composites. The results prove that Pa-Ba can cooperate with IFR to improve the flame retardancy of EP, reducing the addition amount of IFR in EP, thus expanding the application range of EP. In conclusion, adding Pa-Ba to IFR is a more environmentally friendly and efficient method compared with others.

Sign in / Sign up

Export Citation Format

Share Document