scholarly journals Life Cycle Assessment of a Thermal Recycling Process as an Alternative to Existing CFRP and GFRP Composite Wastes Management Options

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4430
Author(s):  
Sankar Karuppannan Gopalraj ◽  
Ivan Deviatkin ◽  
Mika Horttanainen ◽  
Timo Kärki
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Vital Role ◽  
Cement Kiln ◽  
Management Options ◽  
Reinforced Polymer ◽  
Gfrp Composite ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer

There are forecasts for the exponential increase in the generation of carbon fibre-reinforced polymer (CFRP) and glass fibre-reinforced polymer (GFRP) composite wastes containing valuable carbon and glass fibres. The recent adoption of these composites in wind turbines and aeroplanes has increased the amount of end-of-life waste from these applications. By adequately closing the life cycle loop, these enormous volumes of waste can partly satisfy the global demand for their virgin counterparts. Therefore, there is a need to properly dispose these composite wastes, with material recovery being the final target, thanks to the strict EU regulations for promoting recycling and reusing as the highest priorities in waste disposal options. In addition, the hefty taxation has almost brought about an end to landfills. These government regulations towards properly recycling these composite wastes have changed the industries’ attitudes toward sustainable disposal approaches, and life cycle assessment (LCA) plays a vital role in this transition phase. This LCA study uses climate change results and fossil fuel consumptions to study the environmental impacts of a thermal recycling route to recycle and remanufacture CFRP and GFRP wastes into recycled rCFRP and rGFRP composites. Additionally, a comprehensive analysis was performed comparing with the traditional waste management options such as landfill, incineration with energy recovery and feedstock for cement kiln. Overall, the LCA results were favourable for CFRP wastes to be recycled using the thermal recycling route with lower environmental impacts. However, this contradicts GFRP wastes in which using them as feedstock in cement kiln production displayed more reduced environmental impacts than those thermally recycled to substitute virgin composite production.

The all-composite road bridge – a proposal for rapid urbanisation

2018 ◽  
Author(s):  
Tomasz Siwowski ◽  
Aleksander Kozlowski ◽  
Leonard Ziemiański ◽  
Mateusz Rajchel ◽  
Damian Kaleta
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Construction Materials ◽  
Fast Growing ◽  
Frp Composites ◽  
Frp Composite ◽  
Reinforced Polymer ◽  
Composite Bridge ◽  
Fibre Reinforced Polymer ◽  
Traditional Construction

<p>Technology and materials can help cities get smarter and cope with rapid urbanisation. Life cycle assessment (LCA) is one of the approaches applied in evaluation of material sustainability. Many significant LCA comparisons of innovative and traditional construction materials indicate that fibre- reinforced polymer (FRP) composites compare very favourably with other materials studied. As a proposal for rapid urbanisation, the FRP all-composite road bridge was developed and demonstrated in Poland. The paper describes the bridge system itself and presents the results of research on its development. The output of the R&amp;D project gives a very promising future for the FRP composite bridge application in Poland, especially for cleaner, resilient and more environmentally efficient infrastructure of fast-growing cities.</p>

scholarly journals Life Cycle Assessment of Mortars Produced Partially Replacing Cement by Treated Mining Residues

2021 ◽  
Vol 11 (17) ◽  
pp. 7947
Author(s):  
Joana Almeida ◽  
Paulina Faria ◽  
Alexandra Branco Ribeiro ◽  
António Santos Silva
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Ozone Depletion ◽  
Chemical Properties ◽  
Management Options ◽  
Photochemical Ozone ◽  
Mining Residues ◽  
Abiotic Depletion

The use of secondary mining resources to replace conventional constituents in mortars production has proved the effectiveness to preserve the quality of mechanical, physical, and chemical properties. However, minimal research has been performed to quantify the environmental impacts of mortars with mining residues. In the present work, a life cycle assessment of 10 mortars was carried out. A reference mortar (100% of cement binder) and mortars with cement substitutions in 10, 25, and 50% by raw, electrodialytic treated, and electrodialytic plus thermal treated mining residues were analysed. The impacts were studied in six environmental categories: (1) abiotic depletion; (2) global warming; (3) ozone depletion; (4) photochemical ozone creation; (5) acidification; and (6) eutrophication potentials. The results demonstrated that mortars formulated with raw mining residues may decrease the environmental impacts, namely in global warming potential (55.1 kg CO2 eq./t modified mortar). Considering the treatments applied to mining residues, the major mitigations were reported in photochemical ozone creation (−99%), ozone depletion (−76 to −98%), and acidification potential (−90 to −94%), mainly due to the disposal impacts avoided in comparison to the reference mortar. Analysing all mortars’ constituents and their management options, products with electrodialytic treated mining residues showed higher influence in ozone depletion (18 to 52%). Coupling a thermal procedure, mining residues contributed for 99% of the abiotic depletion potential of mortars.

Comparative Analysis of Environmental Impacts between Dregs Disposal and Conventional Cement Production by Life Cycle Assessment (LCA)

2013 ◽  
Vol 777 ◽  
pp. 461-466 ◽  
Author(s):  
Kan Fu ◽  
Xiao Yu Ren ◽  
Jin Quan Lin ◽  
Ping Yue
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Load Ratio ◽  
Environmental Benefits ◽  
Cement Kiln ◽  
Environmental Load ◽  
Human Toxicity ◽  
Cement Production ◽  
Depletion Potential

The environmental impacts of the dregs disposal in cement kiln and conventional production were contrastively evaluated by life cycle assessment (LCA) in this study. The results showed that the environmental load ratio of both cement productions followed the order of energy depletion potential (EDP) > depletion potential (ADP) > global warming potential (GWP) > acidification potential (AP) > human toxicity (HT) > photochemical ozone creation potential (POCP). The comprehensive environmental load of disposal dregs was 14.465×10-12/a, which was 3.98% lower than that of the conventional cement production. Moreover, the reduced percentage of the environmental load followed the order of HT> AP> POCP> EDP> ADP> GWP, which indicated that the reduced percentage of human toxicity and acidification reached 10.62% and 10.06% respectively. Thus, considering the environmental benefits, it would be a better method to dispose dregs instead of limestone in cement kiln.

Influence of Ply Stacking Sequences on the Impact Response of Carbon Fibre Reinforced Polymer Composite Laminates

2019 ◽  
Author(s):  
Kristian Gjerrestad Andersen ◽  
Gbanaibolou Jombo ◽  
Sikiru Oluwarotimi Ismail ◽  
Segun Adeyemi ◽  
Rajini N ◽  
...  
Keyword(s):  
Carbon Fibre ◽  
Polymer Composite ◽  
Composite Laminates ◽  
Impact Response ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
The Impact
Sign in / Sign up

Export Citation Format

Share Document