scholarly journals Detection of Heart and Respiration Rate with an Organic-Semiconductor-Based Optomechanical MEMS Sensor

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 715
Author(s):  
Günter Hammer ◽  
Andreas Kainz ◽  
Wilfried Hortschitz ◽  
Hsiao-Wen Zan ◽  
Hsin-Fei Meng ◽  
...  

We present a displacement-sensitive sensor comprising a microelectromechanical (MEMS) chip and organic optoelectronic components capable of measuring the heart and respiration rate on humans. The MEMS sensor relies on the inertial deflection of a small silicon oscillator. The readout of the deflection is optical and works via modulation of the light flux passing through the MEMS. Organic optoelectronics are used as light source and detector, since these offer a homogeneous light distribution and a more compact package in a future integration. Two types of MEMS, differing in their resonance frequency, were designed and characterised in combination with both organic and inorganic optoelectronics prior to measuring heart and respiration rate. Subsequently, by measurements on the neck, pulse and respiration rate were successfully measured.

2018 ◽  
Vol 7 (2.13) ◽  
pp. 252
Author(s):  
Albert Ashryatov ◽  
Dinara Churakova

The article presents one of the possible options for implementing the lighting technology "Flat beam" for landscape lighting purposes. One of the possible ways to control the light distribution of a number of light sources based on LEDs with different radiation patterns is considered. As a secondary optics, it is proposed to use a mirror surface that redistributes the light flux of an LED light source. It is indicated that, depending on the initial type of the light-emitting diodes light curve and the features of mounting the mirror surface, the resulting light distribution can vary widely, depending on the initial task that the designer sets for himself.  


2021 ◽  
Vol 11 (9) ◽  
pp. 4035
Author(s):  
Jinsheon Kim ◽  
Jeungmo Kang ◽  
Woojin Jang

In the case of light-emitting diode (LED) seaport luminaires, they should be designed in consideration of glare, average illuminance, and overall uniformity. Although it is possible to implement light distribution through auxiliary devices such as reflectors, it means increasing the weight and size of the luminaire, which reduces the feasibility. Considering the special environment of seaport luminaires, which are installed at a height of 30 m or more, it is necessary to reduce the weight of the device, facilitate replacement, and secure a light source with a long life. In this paper, an optimized lens design was investigated to provide uniform light distribution to meet the requirement in the seaport lighting application. Four types of lens were designed and fabricated to verify the uniform light distribution requirement for the seaport lighting application. Using numerical analysis, we optimized the lens that provides the required minimum overall uniformity for the seaport lighting application. A theoretical analysis for the heatsink structure and shape were conducted to reduce the heat from the high-power LED light sources up to 250 W. As a result of these analyses on the heat dissipation characteristics of the high-power LED light source used in the LED seaport luminaire, the heatsink with hexagonal-shape fins shows the best heat dissipation effect. Finally, a prototype LED seaport luminaire with an optimized lens and heat sink was fabricated and tested in a real seaport environment. The light distribution characteristics of this prototype LED seaport luminaire were compared with a commercial high-pressure sodium luminaire and metal halide luminaire.


2015 ◽  
Vol 3 (15) ◽  
pp. 7695-7698 ◽  
Author(s):  
Qian-Qian Zhang ◽  
Ke-Jian Jiang ◽  
Jin-Hua Huang ◽  
Chuan-Wu Zhao ◽  
Li-Peng Zhang ◽  
...  

A push–pull thienoquinoidal dye (QT-1), was synthesized as a sensitizer in a p-DSC, giving a high short-circuit photocurrent density of 8.2 mA cm−2. The result would pave new organic semiconductor sensitizers for use in p-DSCs and other organic optoelectronic devices.


2015 ◽  
Vol 03 (01n02) ◽  
pp. 1540003 ◽  
Author(s):  
Teck Lip Dexter Tam ◽  
Jishan Wu

In this paper, organic optoelectronic research activities in the field of benzo[1,2-c;4,5-c′]bis[1,2,5]thiadiazole (BBT)-based materials are reviewed. Synthetic pathways to the BBT core and its computational studies are described. Collective observations from separate reports suggest open-shell biradical nature of BBT-based materials. Future research directions for these materials are also described.


1960 ◽  
Vol 13 (1) ◽  
pp. 1-107 ◽  
Author(s):  
F.J. Verheijen

AbstractAttempts were made to find out why insects and fishes can be captured with the help of lamps, why birds fly against lighthouse lanterns, and why in the laboratory phototaxis is preponderantly positive phototaxis. An extensive review of the literature revealed that none of the numerous old and new theories on photic orientation can account for either of these phenomena. Analysis of the abundance of data on the trapping effect of an artificial light source upon insects, fishes and birds has led to the working hypothesis according to which the low illumination intensity of the environment around such a light source interferes with normal photic orientation resulting in a drift of the animal towards the light source. The observed concentration of animals in the vicinity of a lamp is thought to be the statistical result of this drift. Experiments with insects (bees) demonstrated that an adequate screening of the light scattered from the sky, together with the elimination of the reflection of light by the environment really result in a disorientated drift towards the light source, even when this is the natural light source (the sun). Fishes and birds were forced to move towards a lamp under similar illumination conditions. Photic orientation is assumed to be accomplished by the goal-directed functioning of a number of hierarchically coordinated centres. The animal's movements are controlled by optic feedback based upon the normal differences in the intensities of the light stimuli acting upon the respective photosensitive surfaces. During more detailed orientation, fixation mechanisms are put in circuit by higher coordinating centres in response to sign stimuli. The normal values of these stimuli are determined by the normal angular light distribution in the animal's habitat, which is caused by: i. the nature of the light sources (sun, moon, stars); 2. the scattering and absorbing capacities of the media (the atmosphere and the water) ; and 3. the reflecting capacity of the environment. The abnormal feedback resulting from the abnormal angular light distribution around a lamp-brought about by the elimination of the factors 2 and 3-makes the animal deviate from the intended position or direction of locomotion. Moreover, the servomechanisms of lower coordination levels controlling the fixation movements of the eyes become a play-thing of the stimuli from the lamp that are quantitatively supernormal as compared with the adequate sign stimuli which normally activate the higher coordination centres of the fixation mechanisms. In this way these higher centres are more or less eliminated from the orientation process. Under extreme laboratory illumination conditions this results in a forced drift of the animal towards the lamp irrespective of factors which are incompatible with survival. Similar phenomena in human beings suffering from disturbance of the centres mediating eye movements, and in patients with far advanced cerebral degenerations (apallic syndrome) are thought to favour this concept. The implications of the present concept of photic orientation and disorientation are discussed with regard to the current concepts of pho- totaxis and photokinesis, the light trap technique, some optical illusions, and glaring lights in traffic. The tendency among cyberneticians to overrate the performances of life-imitating-e.g. "phototropic"- machines, which trifle with the complexity of living organisms, is criticized.


2021 ◽  
Vol 11 ◽  
Author(s):  
Lin Wang ◽  
Xiaowei He ◽  
Jingjing Yu

Cerenkov luminescence tomography (CLT) has attracted much attention because of the wide clinically-used probes and three-dimensional (3D) quantification ability. However, due to the serious morbidity of 3D optical imaging, the reconstructed images of CLT are not appreciable, especially when single-view measurements are used. Single-view CLT improves the efficiency of data acquisition. It is much consistent with the actual imaging environment of using commercial imaging system, but bringing the problem that the reconstructed results will be closer to the animal surface on the side where the single-view image is collected. To avoid this problem to the greatest extent possible, we proposed a prior compensation algorithm for CLT reconstruction based on depth calibration strategy. This method takes full account of the fact that the attenuation of light in the tissue will depend heavily on the depth of the light source as well as the distance between the light source and the detection plane. Based on this consideration, a depth calibration matrix was designed to calibrate the attenuation between the surface light flux and the density of the internal light source. The feature of the algorithm was that the depth calibration matrix directly acts on the system matrix of CLT reconstruction, rather than modifying the regularization penalty items. The validity and effectiveness of the proposed algorithm were evaluated with a numerical simulation and a mouse-based experiment, whose results illustrated that it located the radiation sources accurately by using single-view measurements.


Sign in / Sign up

Export Citation Format

Share Document