scholarly journals Application of Multi-Branch Cauer Circuits in the Analysis of Electromagnetic Transducers Used in Wireless Transfer Power Systems

Sensors ◽  
2020 ◽  
Vol 20 (7) ◽  
pp. 2052
Author(s):  
Milena Kurzawa ◽  
Cezary Jędryczka ◽  
Rafał M. Wojciechowski
Keyword(s):  
Power Systems ◽  
Field Model ◽  
Wireless Power Transfer ◽  
Equivalent Model ◽  
Power Transfer ◽  
Wireless Power ◽  
The Finite Element Method ◽  
Harmonic Field ◽  
Time Harmonic ◽  
The Time Domain

In this paper, the feasibility of applying a multi-branch equivalent model employing first- and second-order Cauer circuits for the analysis of electromagnetic transducers used in systems of wireless power transfer is discussed. A method of formulating an equivalent model (EqM) is presented, and an example is shown for a wireless power transfer system (WPTS) consisting of an air transformer with field concentrators. A method is proposed to synthesize the EqM of the considered transducer based on the time-harmonic field model, an optimization algorithm employing the evolution strategy (ES) and the equivalent Cauer circuits. A comparative analysis of the performance of the considered WPTS under high-frequency voltage supply calculated using the proposed EqM and a 3D field model in the time domain using the finite element method (FEM) was carried out. The selected results of the conducted analysis are presented and discussed.

scholarly journals A Novel Bidirectional Wireless Power Transfer System for Mobile Power Application

2019 ◽  
Vol 9 (18) ◽  
pp. 3769
Author(s):  
Yi-Hung Liao ◽  
Yue Lin
Keyword(s):  
Power Systems ◽  
Power Flow ◽  
Wireless Power Transfer ◽  
Prototype System ◽  
Transfer System ◽  
Power Transfer ◽  
Wireless Power ◽  
Wireless Power Transfer System ◽  
Power Application ◽  
Wearable Electronic Devices

This paper presents a bidirectional wireless power transfer system for mobile power applications. A novel 2-switch bidirectional wireless power transfer system with dual-side control is proposed for mobile power applications. Although only two switches are adopted, the energy can be transferred from the transmitter side to the receiver side and vice versa. The term bidirectional means that the power-flow is bidirectional and also that the transmitter is also a receiver and the receiver is also a transmitter. The output energy can be easily controlled by the duty ratios of the two switches. Thus, the proposed bidirectional power transfer system uses only one circuit to achieve bidirectional power transfer. Hence, the system cost and volume can be reduced so that the system is small and convenient for mobile power systems, portable and/or wearable electronic devices. A prototype system is constructed and the experimental results verify the validity of the proposed bidirectional wireless power transfer system.

scholarly journals Output Voltage and Resistance Assessment of Load-Independent-Voltage-Output Frequency Operating Inductive Wireless Power Transfer Link Utilizing Input DC-Side Measurements Only

Electronics ◽  
2021 ◽  
Vol 10 (17) ◽  
pp. 2109
Author(s):  
Or Trachtenberg ◽  
Alon Kuperman
Keyword(s):  
Output Voltage ◽  
Low Cost ◽  
Wireless Power Transfer ◽  
Equivalent Model ◽  
Estimation Accuracy ◽  
Static System ◽  
Power Transfer ◽  
Wireless Power ◽  
Voltage Output ◽  
Conduction Mode

The paper puts forward a method for predicting output voltage and resistance of a series-series (SS) compensated inductive wireless power transfer (IWPT) link operating at load-independent-voltage-output (LIVO) frequency. The link is a part of the static system (reported by the authors in earlier works), wirelessly delivering power into an enclosed compartment without any secondary-to-primary feedback. The proposed algorithm employs input DC-side quantities (which are slow-varying and nearly noise-free, thus measured utilizing low-cost, low-bandwidth sensors) only to monitor output DC-side quantities, required for protection and/or control. It is shown that high estimation accuracy is retained as long as system parameter values are known and the phasor-domain equivalent circuit is valid (i.e., upon continuous-conduction mode (CCM) of the diode rectifier, where the proposed methodology utilizes the recently revealed modified diode rectifier equivalent model for enhanced accuracy). Under light loading (i.e., in discontinuous conduction mode (DCM)), a nonlinear correction is combined with the proposed technique to retain accuracy. The proposed methodology is well-verified by application to a 400 V to 400 V, 1 kW static IWPT link by simulations and experiments.

scholarly journals Analysis of Dynamic Characteristics of Foreign Metal Objects under Electromagnetic Force in High-Power Wireless Power Transfer

Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3881
Author(s):  
Xian Zhang ◽  
Yanan Ren ◽  
Lin Sha ◽  
Qingxin Yang ◽  
Xuejing Ni ◽  
...  
Keyword(s):  
Electromagnetic Force ◽  
High Speed ◽  
Wireless Power Transfer ◽  
Difficult Problem ◽  
Equivalent Model ◽  
Power Transfer ◽  
Wireless Power ◽  
Coupling Region ◽  
Detection Technology ◽  
Safety And Reliability

Because of the noncontact structure of wireless power transfer (WPT) systems, foreign metal objects can easily enter into the coupling region—and often move under the action of electromagnetic force (EMF), instead of staying relatively static, which brings a difficult problem for foreign object detection technology. In this paper, we investigate the motion state of foreign metal objects with different properties under the action of electromagnetic force in the coupling space of WPT system. The equivalent model of the circuit parameters with the intervention of foreign metal objects and the differential equations for the motion of foreign metal objects are derived. Combined with finite-element simulation calculations, the motion characteristic of ferromagnetic and non-ferromagnetic metals under EMF was analyzed. The results show that, due to the size and properties of the metal, non-ferromagnetic foreign metal objects have four states: vibration, suspension, static and flying out. The ferromagnetic foreign metal objects will adsorb on the coil surface and rapidly heat up. By establishing an experimental prototype, the analysis uses high-speed acquisition equipment to obtain the movement of foreign metal objects which verified the correctness of the simulation. This research is also beneficial to the operational safety and reliability of the WPT.

Scaling Law of Coupling Coefficient and Coil Size in Wireless Power Transfer Design via Magnetic Coupling

2017 ◽  
Vol 137 (4) ◽  
pp. 326-333
Author(s):  
Chiaki Nagai ◽  
Kenji Inukai ◽  
Masato Kobayashi ◽  
Tatsuya Tanaka ◽  
Kensho Abumi ◽  
...  
Keyword(s):  
Coupling Coefficient ◽  
Scaling Law ◽  
Magnetic Coupling ◽  
Wireless Power Transfer ◽  
Power Transfer ◽  
Wireless Power ◽  
Coil Size
Sign in / Sign up

Export Citation Format

Share Document