scholarly journals Synthesis, Characterization and Development of Energy Harvesting Techniques Incorporated with Antennas: A Review Study

Sensors ◽  
2020 ◽  
Vol 20 (10) ◽  
pp. 2772 ◽  
Author(s):  
Husam Hamid Ibrahim ◽  
Mandeep S. J. Singh ◽  
Samir Salem Al-Bawri ◽  
Mohammad Tariqul Islam
Keyword(s):  
Energy Harvesting ◽  
Research Area ◽  
Voltage Regulation ◽  
Input Power ◽  
Energy Sources ◽  
Promising Alternative ◽  
Significant Research ◽  
Rf Energy ◽  
Self Powered ◽  
The Military

The investigation into new sources of energy with the highest efficiency which are derived from existing energy sources is a significant research area and is attracting a great deal of interest. Radio frequency (RF) energy harvesting is a promising alternative for obtaining energy for wireless devices directly from RF energy sources in the environment. An overview of the energy harvesting concept will be discussed in detail in this paper. Energy harvesting is a very promising method for the development of self-powered electronics. Many applications, such as the Internet of Things (IoT), smart environments, the military or agricultural monitoring depend on the use of sensor networks which require a large variety of small and scattered devices. The low-power operation of such distributed devices requires wireless energy to be obtained from their surroundings in order to achieve safe, self-sufficient and maintenance-free systems. The energy harvesting circuit is known to be an interface between piezoelectric and electro-strictive loads. A modern view of circuitry for energy harvesting is based on power conditioning principles that also involve AC-to-DC conversion and voltage regulation. Throughout the field of energy conversion, energy harvesting circuits often impose electric boundaries for devices, which are important for maximizing the energy that is harvested. The power conversion efficiency (PCE) is described as the ratio between the rectifier’s output DC power and the antenna-based RF-input power (before its passage through the corresponding network).

A self-powered ultra-low-power intermittent-control SSHI circuit for piezoelectric energy harvesting

Circuit World ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Guoda Wang ◽  
Ping Li ◽  
Yumei Wen ◽  
Zhichun Luo
Keyword(s):  
Energy Harvesting ◽  
Input Power ◽  
Control Circuit ◽  
Piezoelectric Energy Harvesting ◽  
Intermittent Control ◽  
Ultra Low Power ◽  
Content Type ◽  
Cold Starting ◽  
Piezoelectric Energy ◽  
Self Powered

Purpose Existing control circuits for piezoelectric energy harvesting (PEH) suffers from long startup time or high power consumption. This paper aims to design an ultra-low power control circuit that can harvest weak ambient vibrational energy on the order of several microwatts to power heavy loads such as wireless sensors. Design/methodology/approach A self-powered control circuit is proposed, functioning for very brief periods at the maximum power point, resulting in a low duty cycle. The circuit can start to function at low input power thresholds and can promptly achieve optimal operating conditions when cold-starting. The circuit is designed to be able to operate without stable DC power supply and powered by the piezoelectric transducers. Findings When using the series-synchronized switch harvesting on inductor circuit with a large 1 mF energy storage capacitor, the proposed circuit can perform 322% better than the standard energy harvesting circuit in terms of energy harvested. This control circuit can also achieve an ultra-low consumption of 0.3 µW, as well as capable of cold-starting with input power as low as 5.78 µW. Originality/value The intermittent control strategy proposed in this paper can drastically reduce power consumption of the control circuit. Without dedicated cold-start modules and DC auxiliary supply, the circuit can achieve optimal efficiency within one input cycle, if the input signal is larger than voltage threshold. The proposed control strategy is especially favorable for harvesting energy from natural vibrations and can be a promising solution for other PEH circuits as well.

scholarly journals A 2.77 μW Ambient RF Energy Harvesting Using DTMOS Cross-Coupled Rectifier on 65 nm SOTB and Wide Bandwidth System Design

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1173
Author(s):  
Thuy-Linh Nguyen ◽  
Yasuo Sato ◽  
Koichiro Ishibashi
Keyword(s):  
Energy Harvesting ◽  
Orthogonal Frequency Division Multiplexing ◽  
Input Power ◽  
Potential Candidate ◽  
Wide Bandwidth ◽  
Rf Energy Harvesting ◽  
Ambient Environment ◽  
Rf Energy ◽  
Rf Signal ◽  
To Receive

This paper proposes a structure of the μ W RF energy harvesting (RFEH) system that is used for scavenging RF power from an ambient environment. A cross-coupled rectifier (CCR) with floating sub-circuit structures was utilized in the application of dynamic threshold MOSFET (DTMOS) on Silicon on Thin Buried Oxide (SOTB) to obtain high drain conductance of the MOSFET. A wide bandwidth matching between antenna and rectifier was designed to receive energy from the orthogonal frequency division multiplexing (OFDM) RF signal with a bandwidth of 15 MHz at 950 MHz band. Realistic measurements with a 950 MHz LTE mobile phone signal from the ambient environment indicate that an average DC output power of 2.77 μ W is harvested with the proposed RFEH system at a level of −19.4 dBm input power. The proposed RFEH system exhibits the best performance when compared to that of other realistic RFEH systems and is a potential candidate for battery-less Internet of Things (IoT) applications.

scholarly journals Simple Adaptive Rectifier with High Efficiency over a Range of 21 dBm Input Power for RF Energy Harvesting Applications

2021 ◽  
pp. 8-15
Author(s):  
Eman M. Abdelhady ◽  
◽  
Hala M. Abdelkader ◽  
Amr A. Al-Awamry
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Breakdown Voltage ◽  
Adaptive Design ◽  
High Efficiency ◽  
Power Level ◽  
Input Power ◽  
Rf Energy Harvesting ◽  
High Input Power ◽  
Rf Energy

This paper presents a novel simple adaptive and efficient rectifier for Radio Frequency (RF) energy harvesting applications. Traditional rectifiers have maximum RF-DC Power Conversion Efficiency (PCE) over a narrow range of RF input power due to diode breakdown voltage restrictions. The proposed adaptive design helps to extend the PCE over a wider range of RF input power at 2.45GHz using a simple design. Two alternative paths arecontrolled depending on the RF input power level. Low input power levels activate the first path connected to a single rectifier; low power levels make the diode operate below its breakdown voltage and therefore avoiding PCE degradation. High input power levels activate the second path dividing it into three rectifiers. This keeps input power at each rectifier at a low power level to avoid exceeding the diode break down voltage. Simulated PCE of this work is kept above 50% over a range of 21.4 dBm input power from -0.8dBm to 20.6dBm.

High Humidity-Resistive Triboelectric Nanogenerator via Coupling of Dielectric Materials Selection and Surface-Charge Engineering

2021 ◽  
Author(s):  
Lu Liu ◽  
Linglin Zhou ◽  
Chuguo Zhang ◽  
Zhihao Zhao ◽  
Shaoxin Li ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Surface Charge ◽  
Dielectric Materials ◽  
Energy Sources ◽  
Triboelectric Nanogenerator ◽  
High Humidity ◽  
Distributed Energy ◽  
Materials Selection ◽  
Output Performance ◽  
Self Powered

Triboelectric nanogenerator (TENG) has been demonstrated as a revolutionary energy-harvesting technology toward distributed energy sources and self-powered systems, however, its output performance is significantly affected by humidity, which seriously limits...

scholarly journals An Efficient Reconfigurable RF-DC Converter With Wide Input Power Range for RF Energy Harvesting

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 79310-79318 ◽  
Author(s):  
Danial Khan ◽  
Seong Jin Oh ◽  
Khuram Shehzad ◽  
Muhammad Basim ◽  
Deeksha Verma ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Input Power ◽  
Rf Energy Harvesting ◽  
Rf Energy
Sign in / Sign up

Export Citation Format

Share Document