scholarly journals Bioluminescent Ratiometric Indicator for Analysis of Water Hardness in Household Water

Sensors ◽  
2020 ◽  
Vol 20 (11) ◽  
pp. 3164
Author(s):  
Md Nadim Hossain ◽  
Ryuichi Ishida ◽  
Mitsuru Hattori ◽  
Tomoki Matsuda ◽  
Takeharu Nagai
Keyword(s):  
Fluorescent Protein ◽  
Dissociation Constants ◽  
Negative Impact ◽  
Low Cost ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Water Hardness ◽  
Hard Water ◽  
Household Water

Water hardness (WH) is a useful parameter for testing household water, such as drinking, cooking, and washing water. Many countries around the world use pipeline water in their houses, but there is a need to monitor the WH because hard water has a negative impact on appliances. Currently, WH is often measured using chemical dye-based WH indicators, and these techniques require expensive equipment, and trained personnel. Therefore, a low-cost and simple measurement method has been desired. Here, we report LOTUS-W, which consists of a luciferase, Nanoluc, a yellow fluorescent protein Venus, and a Ca2+/Mg2+ detection domain of human centrin 3. The binding of Ca2+/Mg2+ to this indicator changes the conformation of human centrin 3, and induces bioluminescence resonance energy transfer (BRET) from Nanoluc to Venus, which changes its emission spectrum about 140%. The dissociation constants of LOTUS-W for Ca2+/Mg2+ are approximately several mM, making it suitable for measuring WH in the household water. With this indicator in combination with a smartphone, we have demonstrated that it is possible to evaluate WH easily and quickly. This novel indicator has the potential to be used for measuring not only household water but also water used in the food industry, etc.

scholarly journals Designing a Compact, Low-Cost FRET Microscopy Platform for the Undergraduate Classroom

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
John W. Rupel ◽  
Sophia M. Sdao ◽  
Kadina E. Johnston ◽  
Ethan T. Nethery ◽  
Kaitlyn A. Gabardi ◽  
...  
Keyword(s):  
Undergraduate Students ◽  
Fluorescent Protein ◽  
Dynamic Range ◽  
Low Cost ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Light Sources ◽  
Effective Manner ◽  
Primary Mouse

ABSTRACT Advances in fluorescent biosensors allow researchers to spatiotemporally monitor a diversity of biochemical reactions and secondary messengers. However, commercial microscopes for the specific application of Förster Resonance Energy Transfer (FRET) are prohibitively expensive to implement in the undergraduate classroom, owing primarily to the dynamic range required and need for ratiometric emission imaging. The purpose of this article is to provide a workflow to design a low-cost, FRET-enabled microscope and to equip the reader with sufficient knowledge to compare commercial light sources, optics, and cameras to modify the device for a specific application. We used this approach to construct a microscope that was assembled by undergraduate students with no prior microscopy experience that is suitable for most single-cell cyan and yellow fluorescent protein FRET applications. The utility of this design was demonstrated by measuring small metabolic oscillations by using a lactate FRET sensor expressed in primary mouse pancreatic islets, highlighting the biologically suitable signal-to-noise ratio and dynamic range of our compact microscope. The instructions in this article provide an effective teaching tool for undergraduate educators and students interested in implementing FRET in a cost-effective manner.

scholarly journals Enhanced brightness of bacterial luciferase by bioluminescence resonance energy transfer

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Tomomi Kaku ◽  
Kazunori Sugiura ◽  
Tetsuyuki Entani ◽  
Kenji Osabe ◽  
Takeharu Nagai
Keyword(s):  
Energy Transfer ◽  
Mammalian Cells ◽  
Fluorescent Protein ◽  
Color Change ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Bioluminescence Resonance Energy Transfer ◽  
Bacterial Luciferase ◽  
Bacterial Bioluminescence

AbstractUsing the lux operon (luxCDABE) of bacterial bioluminescence system as an autonomous luminous reporter has been demonstrated in bacteria, plant and mammalian cells. However, applications of bacterial bioluminescence-based imaging have been limited because of its low brightness. Here, we engineered the bacterial luciferase (heterodimer of luxA and luxB) by fusion with Venus, a bright variant of yellow fluorescent protein, to induce bioluminescence resonance energy transfer (BRET). By using decanal as an externally added substrate, color change and ten-times enhancement of brightness was achieved in Escherichia coli when circularly permuted Venus was fused to the C-terminus of luxB. Expression of the Venus-fused luciferase in human embryonic kidney cell lines (HEK293T) or in Nicotiana benthamiana leaves together with the substrate biosynthesis-related genes (luxC, luxD and luxE) enhanced the autonomous bioluminescence. We believe the improved luciferase will forge the way towards the potential development of autobioluminescent reporter system allowing spatiotemporal imaging in live cells.

scholarly journals Analysis of IFITM-IFITM Interactions by a Flow Cytometry-Based FRET Assay

2019 ◽  
Vol 20 (16) ◽  
pp. 3859 ◽  
Author(s):  
Michael Winkler ◽  
Florian Wrensch ◽  
Pascale Bosch ◽  
Maike Knoth ◽  
Michael Schindler ◽  
...  
Keyword(s):  
Antiviral Activity ◽  
Protein Interactions ◽  
Viral Entry ◽  
Cellular Localization ◽  
Fluorescent Protein ◽  
Fluorescent Proteins ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Protein Protein Interactions

The interferon-induced transmembrane proteins 1–3 (IFITM1–3) inhibit host cell entry of several viruses. However, it is incompletely understood how IFITM1–3 exert antiviral activity. Two phenylalanine residues, F75 and F78, within the intramembrane domain 1 (IM1) were previously shown to be required for IFITM3/IFITM3 interactions and for inhibition of viral entry, suggesting that IFITM/IFITM interactions might be pivotal to antiviral activity. Here, we employed a fluorescence resonance energy transfer (FRET) assay to analyze IFITM/IFITM interactions. For assay calibration, we equipped two cytosolic, non-interacting proteins, super yellow fluorescent protein (SYFP) and super cyan fluorescent protein (SCFP), with signals that target proteins to membrane rafts and also analyzed a SCFP-SYFP fusion protein. This strategy allowed us to discriminate background signals resulting from colocalization of proteins at membrane subdomains from signals elicited by protein–protein interactions. Coexpression of IFITM1–3 and IFITM5 fused to fluorescent proteins elicited strong FRET signals, and mutation of F75 and F78 in IFITM3 (mutant IFITM3-FF) abrogated antiviral activity, as expected, but did not alter cellular localization and FRET signals. Moreover, IFITM3-FF co-immunoprecipitated efficiently with wild type (wt) IFITM3, lending further support to the finding that lack of antiviral activity of IFITM3-FF was not due to altered membrane targeting or abrogated IFITM3-IFITM3 interactions. Collectively, we report an assay that allows quantifying IFITM/IFITM interactions. Moreover, we confirm residues F75 and F78 as critical for antiviral activity but also show that these residues are dispensable for IFITM3 membrane localization and IFITM3/IFITM3 interactions.

scholarly journals Ultra-Sensitive Hydrogen Peroxide Sensor Based on Peroxiredoxin and Fluorescence Resonance Energy Transfer

2020 ◽  
Vol 10 (10) ◽  
pp. 3508
Author(s):  
Haijun Yu ◽  
Haoxiang Li ◽  
Yao Zhou ◽  
Shengmin Zhou ◽  
Ping Wang
Keyword(s):  
Energy Transfer ◽  
Fluorescence Resonance Energy Transfer ◽  
Disulfide Bonds ◽  
Fluorescent Protein ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Mixed Disulfide ◽  
Fluorescence Resonance ◽  
Protein Sensor

In this paper, a fluorescence resonance energy transfer (FRET)-based sensor for ultra-sensitive detection of H2O2 was developed by utilizing the unique enzymatic properties of peroxiredoxin (Prx) to H2O2. Cyan and yellow fluorescent protein (CFP and YFP) were fused to Prx and mutant thioredoxin (mTrx), respectively. In the presence of H2O2, Prx was oxidized into covalent homodimer through disulfide bonds, which were further reduced by mTrx to form a stable mixed disulfide bond intermediate between CFP-Prx and mTrx-YFP, inducing FRET. A linear quantification range of 10–320 nM was obtained according to the applied protein concentrations and the detection limit (LOD) was determined to be as low as 4 nM. By the assistance of glucose oxidase to transform glucose into H2O2, the CFP-Prx/mTrx-YFP system (CPmTY) was further exploited for the detection of glucose in real sample with good performance, suggesting this CPmTY protein sensor is highly practical.

scholarly journals Fluorescent sensors for activity and regulation of the nitrate transceptor CHL1/NRT1.1 and oligopeptide transporters

2014 ◽  
Author(s):  
Cheng Hsun Ho ◽  
Wolf B. Frommer
Keyword(s):  
Fluorescent Protein ◽  
New Technology ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Peptide Transport ◽  
Transport Activity ◽  
Proton Coupling ◽  
Activity Sensors

To monitor nitrate and peptide transport activity in vivo, we converted the dual-affinity nitrate transceptor CHL1/NRT1.1/NPF6.3 and four related oligopeptide transporters PTR1, 2, 4 and 5 into fluorescence activity sensors (NiTrac1, PepTrac). Substrate addition to yeast expressing transporter fusions with yellow fluorescent protein and mCerulean triggered substrate-dependent donor quenching or resonance energy transfer. Fluorescence changes were nitrate/peptide-specific, respectively. Like CHL1, NiTrac1 had biphasic kinetics. Mutation of T101A eliminated high-affinity transport and blocked the fluorescence response to low nitrate. NiTrac was used for characterizing side chains considered important for substrate interaction, proton coupling, and regulation. We observed a striking correlation between transport activity and sensor output. Coexpression of NiTrac with known calcineurin-like proteins (CBL1, 9; CIPK23) and candidates identified in an interactome screen (CBL1, KT2, WNKinase 8) blocked NiTrac1 responses, demonstrating the suitability for in vivo analysis of activity and regulation. The new technology is applicable in plant and medical research.

scholarly journals Distance-Dependent Fluorescence Resonance Energy Transfer Enhancement on Nanoporous Gold

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2927
Author(s):  
Lianmin Cui ◽  
Ling Zhang ◽  
Heping Zeng
Keyword(s):  
Energy Transfer ◽  
Fluorescent Protein ◽  
Fluorescent Proteins ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Nanoporous Gold ◽  
Maximum Enhancement ◽  
Characteristic Energy ◽  
Fluorescence Resonance

Fluorescence resonance energy transfers (FRET) between cyan fluorescent protein (CFP) and yellow fluorescent protein (YFP) on nanoporous gold (NPG) are systematically investigated by controlling the distance between NPG and fluorescent proteins with polyelectrolyte multilayers. The FRET between CFP and YFP is significantly enhanced by NPG, and the maximum enhancement is related to both ligament size of NPG and the distance between NPG and proteins. With the optimized distance, 18-fold FRET enhancement was obtained on NPG compared to that on glass, and the conversion efficiency is about 90%. The potential to tune the characteristic energy transfer distance has implications for applications in nanophotonic devices and provides a possible way to design sensors and light energy converters.

Abstract 16905: Fluorescence Resonance Energy Transfer Reveals that Cardiac Calcium ATPase Dimerizes and Forms a Complex with Phospholamban in a 2:1 Stoichiometry

Circulation ◽  
2014 ◽  
Vol 130 (suppl_2) ◽  
Author(s):  
Daniel Blackwell ◽  
Seth L Robia
Keyword(s):  
Energy Transfer ◽  
Fluorescence Resonance Energy Transfer ◽  
Fluorescent Protein ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Calcium Atpase ◽  
The Other ◽  
Fret Efficiency ◽  
Fluorescence Resonance

The sarco/endoplasmic reticulum calcium ATPase (SERCA) has been proposed to form functional dimers in vitro. In order to investigate whether SERCA forms homo-dimers in live cells, we fused canine SERCA2a to cerulean (Cer) or yellow fluorescent protein (YFP), and quantified SERCA-SERCA interactions by fluorescence resonance energy transfer (FRET). SERCA-SERCA FRET efficiency was dependent on the labeling position of the fluorescent protein tags, with the highest FRET efficiency achieved when the respective fluorescent proteins were fused to SERCA N-termini. FRET was reduced by competition with unlabeled SERCA, suggesting that the observed FRET was due to specific protein-protein interactions. Progressive photobleaching of YFP showed that Cer intensity increased linearly with decreasing YFP intensity, suggesting that the stoichiometry of the SERCA complex is a dimer. In contrast, a control experiment with phospholamban (PLB) oligomer showed a non-linear YFP/Cer relationship, consistent with its well-known pentameric stoichiometry. We also investigated whether SERCA dimers could interact with PLB, the regulatory binding partner of SERCA. Interestingly, while average maximal FRET was 28% between SERCA and PLB, fluorescence lifetime measurements revealed two different lifetimes, consistent with two different populations of FRET donors. One population showed very low FRET, while the other population exhibited high FRET- approximately double the measured average maximal FRET efficiency. The data are consistent with a single PLB bound to each SERCA homo-dimer; in this regulatory complex one SERCA protomer is in close proximity to PLB (50 Å), while the other is too far away to participate in FRET with PLB.

scholarly journals Mapping the Architecture of Secretin Receptors with Intramolecular Fluorescence Resonance Energy Transfer Using Acousto-Optic Tunable Filter-Based Spectral Imaging

2007 ◽  
Vol 21 (8) ◽  
pp. 1997-2008 ◽  
Author(s):  
Cayle S. Lisenbee ◽  
Kaleeckal G. Harikumar ◽  
Laurence J. Miller
Keyword(s):  
Energy Transfer ◽  
Fluorescence Resonance Energy Transfer ◽  
Fluorescent Protein ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Tunable Filter ◽  
Intracellular Loop ◽  
Secretin Receptor ◽  
Fluorescence Resonance

Abstract The molecular structure and agonist-induced conformational changes of class II G protein-coupled receptors are poorly understood. In this work, we developed and characterized a series of dual cyan fluorescent protein (CFP)-tagged and yellow fluorescent protein (YFP)-tagged secretin receptor constructs for use in various functional and fluorescence analyses of receptor structural variants. CFP insertions within the first or second intracellular loop domains of this receptor were tolerated poorly or partially, respectively, in receptors tagged with a carboxyl-terminal yellow fluorescent protein that itself had no effect on secretin binding or cAMP production. A similar CFP insertion into the third intracellular loop resulted in a plasma membrane-localized receptor that bound secretin and signaled normally. This fully active third-loop variant exhibited a significant decrease in fluorescence resonance energy transfer signals that were recorded with an acousto-optic tunable filter microscope after exposure to secretin agonist but not to a receptor antagonist. These data demonstrate changes in the relative positions of intracellular structures that support a model for secretin receptor activation.

Sign in / Sign up

Export Citation Format

Share Document