scholarly journals Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen

Sensors ◽  
2021 ◽  
Vol 21 (22) ◽  
pp. 7742
Author(s):  
Jingjing Jiang ◽  
Jili Xia ◽  
Yang Zang ◽  
Guowang Diao
Keyword(s):  
Carcinoembryonic Antigen ◽  
Early Cancer ◽  
Low Cost ◽  
High Sensitivity ◽  
Advanced Materials ◽  
Current Trends ◽  
Signaling Strategies ◽  
Development Prospects ◽  
Screening And Diagnosis ◽  
Excellent Selectivity

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people’s increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

scholarly journals Integrating high-performing electrochemical transducers in lateral flow assay

2021 ◽  
Author(s):  
Antonia Perju ◽  
Nongnoot Wongkaew
Keyword(s):  
High Performance ◽  
Point Of Care ◽  
Low Cost ◽  
High Sensitivity ◽  
Lateral Flow ◽  
Analytical Performance ◽  
Label Free ◽  
High Performing ◽  
Lateral Flow Assays ◽  
Electrochemical Transducers

AbstractLateral flow assays (LFAs) are the best-performing and best-known point-of-care tests worldwide. Over the last decade, they have experienced an increasing interest by researchers towards improving their analytical performance while maintaining their robust assay platform. Commercially, visual and optical detection strategies dominate, but it is especially the research on integrating electrochemical (EC) approaches that may have a chance to significantly improve an LFA’s performance that is needed in order to detect analytes reliably at lower concentrations than currently possible. In fact, EC-LFAs offer advantages in terms of quantitative determination, low-cost, high sensitivity, and even simple, label-free strategies. Here, the various configurations of EC-LFAs published are summarized and critically evaluated. In short, most of them rely on applying conventional transducers, e.g., screen-printed electrode, to ensure reliability of the assay, and additional advances are afforded by the beneficial features of nanomaterials. It is predicted that these will be further implemented in EC-LFAs as high-performance transducers. Considering the low cost of point-of-care devices, it becomes even more important to also identify strategies that efficiently integrate nanomaterials into EC-LFAs in a high-throughput manner while maintaining their favorable analytical performance.

scholarly journals Current Trends in Polymer Based Sensors

Chemosensors ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 108
Author(s):  
Giancarla Alberti ◽  
Camilla Zanoni ◽  
Vittorio Losi ◽  
Lisa Rita Magnaghi ◽  
Raffaela Biesuz
Keyword(s):  
Chemical Structure ◽  
Low Cost ◽  
Sensing Applications ◽  
Current Trends ◽  
Manufacturing Methods ◽  
New Devices

This review illustrates various types of polymer and nanocomposite polymeric based sensors used in a wide variety of devices. Moreover, it provides an overview of the trends and challenges in sensor research. As fundamental components of new devices, polymers play an important role in sensing applications. Indeed, polymers offer many advantages for sensor technologies: their manufacturing methods are pretty simple, they are relatively low-cost materials, and they can be functionalized and placed on different substrates. Polymers can participate in sensing mechanisms or act as supports for the sensing units. Another good quality of polymer-based materials is that their chemical structure can be modified to enhance their reactivity, biocompatibility, resistance to degradation, and flexibility.

scholarly journals 60–700 K CTAT and PTAT Temperature Sensors with 4H-SiC Schottky Diodes

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 942
Author(s):  
Razvan Pascu ◽  
Gheorghe Pristavu ◽  
Gheorghe Brezeanu ◽  
Florin Draghici ◽  
Philippe Godignon ◽  
...  
Keyword(s):  
Low Cost ◽  
Schottky Diodes ◽  
Schottky Contact ◽  
High Sensitivity ◽  
Xrd Analysis ◽  
Absolute Temperature ◽  
Lower Sensitivity ◽  
Readout Circuit ◽  
Sensing Element ◽  
High Performing

A SiC Schottky dual-diode temperature-sensing element, suitable for both complementary variation of VF with absolute temperature (CTAT) and differential proportional to absolute temperature (PTAT) sensors, is demonstrated over 60–700 K, currently the widest range reported. The structure’s layout places the two identical diodes in close, symmetrical proximity. A stable and high-barrier Schottky contact based on Ni, annealed at 750 °C, is used. XRD analysis evinced the even distribution of Ni2Si over the entire Schottky contact area. Forward measurements in the 60–700 K range indicate nearly identical characteristics for the dual-diodes, with only minor inhomogeneity. Our parallel diode (p-diode) model is used to parameterize experimental curves and evaluate sensing performances over this far-reaching domain. High sensitivity, upwards of 2.32 mV/K, is obtained, with satisfactory linearity (R2 reaching 99.80%) for the CTAT sensor, even down to 60 K. The PTAT differential version boasts increased linearity, up to 99.95%. The lower sensitivity is, in this case, compensated by using a high-performing, low-cost readout circuit, leading to a peak 14.91 mV/K, without influencing linearity.

scholarly journals Exploring and Exploiting the Symmetry-Breaking Effect of Cyclodextrins in Mechanomolecules

Symmetry ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1249 ◽  
Author(s):  
Bruns
Keyword(s):  
Symmetry Breaking ◽  
Chemical Synthesis ◽  
Low Cost ◽  
Molecular Machine ◽  
Advanced Materials ◽  
Breaking Effect ◽  
Planar Chirality ◽  
Conical Shape ◽  
Wide Availability ◽  
Molecular Rings

Cyclodextrins (CDs) are cone-shaped molecular rings that have been widely employed in supramolecular/host–guest chemistry because of their low cost, high biocompatibility, stability, wide availability in multiple sizes, and their promiscuity for binding a range of molecular guests in water. Consequently, CD-based host–guest complexes are often employed as templates for the synthesis of mechanically bonded molecules (mechanomolecules) such as catenanes, rotaxanes, and polyrotaxanes in particular. The conical shape and cyclodirectionality of the CD “bead” gives rise to a symmetry-breaking effect when it is threaded onto a molecular “string”; even symmetrical guests are rendered asymmetric by the presence of an encircling CD host. This review focuses on the stereochemical implications of this symmetry-breaking effect in mechanomolecules, including orientational isomerism, mechanically planar chirality, and topological chirality, as well as how they support applications in regioselective and stereoselective chemical synthesis, the design of molecular machine prototypes, and the development of advanced materials.

Low-Cost $K$ -Band Patch Array Antenna for High-Sensitivity EM Sensor

2010 ◽  
Vol 9 ◽  
pp. 982-985 ◽  
Author(s):  
Young-Bae Jung ◽  
Jung Han Choi ◽  
Chang Won Jung
Keyword(s):  
Low Cost ◽  
High Sensitivity ◽  
Array Antenna

Highly sensitive detection of Cr(vi) in groundwater by bimetallic NiFe nanoparticles

2017 ◽  
Vol 9 (6) ◽  
pp. 1031-1037 ◽  
Author(s):  
Jingtao Liu ◽  
Yu Ding ◽  
Lifei Ji ◽  
Xin Zhang ◽  
Fengchun Yang ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Hexavalent Chromium ◽  
Low Cost ◽  
High Sensitivity ◽  
Sensitive Detection ◽  
Toxic Heavy Metal ◽  
Metal Pollutants ◽  
Highly Sensitive ◽  
Highly Sensitive Detection ◽  
Heavy Metal Pollutants

Hexavalent chromium (Cr(vi)) is one of the most toxic heavy metal pollutants in groundwater, and thus the detection of Cr(vi) with high sensitivity, accuracy, and simplicity and low cost is of great importance.

scholarly journals Bacterial Nanocellulose in Dentistry: Perspectives and Challenges

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 49
Author(s):  
Hélida Gomes de Oliveira Barud ◽  
Robson Rosa da Silva ◽  
Marco Antonio Costa Borges ◽  
Guillermo Raul Castro ◽  
Sidney José Lima Ribeiro ◽  
...  
Keyword(s):  
Tissue Repair ◽  
Biomedical Applications ◽  
Low Cost ◽  
Pulp Tissue ◽  
Bacterial Nanocellulose ◽  
Artificial Blood ◽  
Current Trends ◽  
Artificial Blood Vessels ◽  
Near Future ◽  
Dressing Materials

Bacterial cellulose (BC) is a natural polymer that has fascinating attributes, such as biocompatibility, low cost, and ease of processing, being considered a very interesting biomaterial due to its options for moldability and combination. Thus, BC-based compounds (for example, BC/collagen, BC/gelatin, BC/fibroin, BC/chitosan, etc.) have improved properties and/or functionality, allowing for various biomedical applications, such as artificial blood vessels and microvessels, artificial skin, and wounds dressing among others. Despite the wide applicability in biomedicine and tissue engineering, there is a lack of updated scientific reports on applications related to dentistry, since BC has great potential for this. It has been used mainly in the regeneration of periodontal tissue, surgical dressings, intraoral wounds, and also in the regeneration of pulp tissue. This review describes the properties and advantages of some BC studies focused on dental and oral applications, including the design of implants, scaffolds, and wound-dressing materials, as well as carriers for drug delivery in dentistry. Aligned to the current trends and biotechnology evolutions, BC-based nanocomposites offer a great field to be explored and other novel features can be expected in relation to oral and bone tissue repair in the near future.

Sign in / Sign up

Export Citation Format

Share Document