scholarly journals Evaluation of Thermal Comfort and Energy Consumption of Water Flow Glazing as a Radiant Heating and Cooling System: A Case Study of an Office Space

2020 ◽  
Vol 12 (18) ◽  
pp. 7596
Author(s):  
Belen Moreno Santamaria ◽  
Fernando del Ama Gonzalo ◽  
Benito Lauret Aguirregabiria ◽  
Juan A. Hernandez Ramos
Keyword(s):  
Energy Consumption ◽  
Solar Radiation ◽  
Energy Management ◽  
Water Flow ◽  
Cooling System ◽  
Air Cooling ◽  
Radiant Heating ◽  
Large Glass ◽  
Heating And Cooling ◽  
Office Space

Large glass areas, even high-performance glazing with Low-E coating, could lead to discomfort if exposed to solar radiation due to radiant asymmetry. In addition, air-to-air cooling systems affect the thermal environment indoors. Water-Flow Glazing (WFG) is a disruptive technology that enables architects and engineers to design transparent and translucent facades with new features, such as energy management. Water modifies the thermal behavior of glass envelopes, the spectral distribution of solar radiation, the non-uniform nature of radiation absorption, and the diffusion of heat by conduction across the glass pane. The main goal of this article was to assess energy consumption and comfort conditions in office spaces with a large glass area by using WFG as a radiant heating and cooling system. This article evaluates the design and operation of an energy management system coupled with WFG throughout a year in an actual office space. Temperature, relative humidity, and solar radiation sensors were connected to a control unit that actuated the different devices to keep comfortable conditions with minimum energy consumption. The results in summer conditions revealed that if the mean radiant temperature ranged from 19.3 to 23 °C, it helped reduce the operative temperature to comfortable levels when the indoor air temperature was between 25 and 27.5 °C. The Predicted Mean Vote in summer conditions was between 0 and −0.5 in working hours, within the recommended values of ASHRAE-55 standard.

scholarly journals Energy Monitoring in a Heating and Cooling System in a Building Based on the Example of the Turówka Hotel

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1968 ◽  
Author(s):  
Marek Borowski ◽  
Piotr Mazur ◽  
Sławosz Kleszcz ◽  
Klaudia Zwolińska
Keyword(s):  
Energy Consumption ◽  
Energy Management ◽  
Energy Demand ◽  
Cooling System ◽  
Energy Performance ◽  
High Energy ◽  
Building Envelope ◽  
Large Variability ◽  
Heating And Cooling ◽  
And Control

The energy consumption of buildings is very important for both economic and environmental reasons. Newly built buildings are characterized by higher insulation and airtightness of the building envelope, and are additionally equipped with technologies that minimize energy consumption in order to meet legal requirements. In existing buildings, the modernization process should be properly planned, taking into account available technologies and implementation possibilities. Hotel buildings are characterized by a large variability of energy demand, both on a daily and a yearly basis. Monitoring systems, therefore, provide the necessary information needed for proper energy management in the building. This article presents an energy analysis of the Turówka hotel located in Wieliczka (southern Poland). The historical hotel facility is being modernized as part of the project to adapt the building to the requirements of a sustainable building. The modernization proposal includes a trigeneration system with a multifunctional reverse regenerator and control module using neural algorithms. The main purpose is to improve the energy efficiency of the building and adapt it to the requirements of low-energy buildings. The implementation of a monitoring system enables energy consumption to be reduced and improves the energy performance of the building, especially through using energy management systems and control modules. The proposed retrofit solution considers the high energy consumption, structure of the energy demand, and limits of retrofit intervention on façades.

A Glance on Radiant Cooling Technology for Heating and Cooling for Residential and Commercial Building Application

2020 ◽  
Vol 07 (3&4) ◽  
pp. 13-19
Author(s):  
Shubham S Kulkarni ◽  
Keyword(s):  
Energy Consumption ◽  
Life Cycle Cost ◽  
Cooling System ◽  
Radiant Heating ◽  
Commercial Building ◽  
Heating And Cooling ◽  
Radiant Cooling ◽  
Air Conditioning Systems ◽  
Increasing Temperature ◽  
Chilled Ceiling

As we know that nowadays due to the hot and humid weather and the increasing temperature the high amount of energy consumption is used for the heating & cooling purpose in residential as well as in commercial building for air conditioning systems. To overcome this problem and to reduce the energy consumption as well as good thermal comfort to people in the indoor environment, use the radiant heating & cooling system is a better way. This concept is used to cool or heat the room and absorbs the indoor sensible heat by thermal radiation. The system removes heat by using less energy and more energy-efficient. This system uses water as a medium to cool or heat the room space. There are three types discussed in these papers for cooling & heating. In this paper, we did an overall study regarding radiant heating and cooling systems. It reduces the energy lost due to the duct leakage. It also has a lower life cycle cost compared to conventional. In this paper, we have reviewed how to reduce energy consumption and give thermal comfortable air-condition through radiant cooling and chilled ceiling panel system.

An Overview of Different Indirect and Semi-Indirect Evaporative Cooling System for Study Potency of Nanopore Skinless Bamboo as An Evaporative Cooling New Porous Material

2021 ◽  
Vol 79 (2) ◽  
pp. 123-130
Author(s):  
I Nyoman Suprapta Winaya ◽  
Hendra Wijaksana ◽  
Made Sucipta ◽  
Ainul Ghurri
Keyword(s):  
Energy Consumption ◽  
Porous Material ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Temperature Drop ◽  
High Energy ◽  
Dew Point ◽  
Air Cooling ◽  
Evaporative Cooling System ◽  
Indirect Evaporative Cooling

The high energy consumption of compressor based cooling system has prompted the researchers to study and develop non-compressor based cooling system that less energy consumption, less environment damaging but still has high enough cooling performances. Indirect and semi indirect evaporative cooling system is the feasible non-compressor based cooling systems that can reach the cooling performance required. This two evaporative cooling system has some different in construction, porous material used, airflow scheme and secondary air cooling method used for various applications. This paper would report the cooling performances achieved by those two cooling system in terms of cooling efficiency, cooling capacity, wet bulb effectiveness, dew point effectiveness, and temperature drop. Porous material used in indirect and semi-indirect evaporative cooling would be highlighted in terms of their type, size, thickness and any other feature. The introduction of nanopore skinless bamboo potency as a new porous material for either indirect or semi-indirect evaporative cooling would be described. In the future study of nanopore skinless bamboo, a surface morphology and several hygrothermal test including sorption, water vapor transmission, thermal conductivity test would be applied, before it utilize as a new porous material for direct or semi indirect evaporative cooling.

Analysis of Running Energy Consumption of Fresh Air Cooling Systems

Solar Energy ◽  
2005 ◽  
Author(s):  
Jianing Zhao ◽  
Jun Guo ◽  
Weimeng Sun
Keyword(s):  
Energy Consumption ◽  
Total Energy ◽  
Cooling System ◽  
Air Cooling ◽  
Total Energy Consumption ◽  
Cooling Systems ◽  
Variable Air Volume ◽  
Air Volume ◽  
Air System ◽  
Different Seasons

Utilization of renewable energy becomes more and more attractive and crucial for sustainable buildings. A cooling system, using outdoor fresh air and combining with the conventional all-air system or running along during different seasons, is discussed in this study. Running energy consumption of this system is analyzed by a mathematical model using the Genetic Algorithm (GA) combined with the traditional Lagrange method. To evaluate and apply this new system, energy consumption of the chiller unit, water and air sub-systems, as well as the total energy consumption of such a system is compared with that of the conventional all-air system. Consequently, the total energy consumption is selected as the criterion of energy efficiency. The results show that the cooling system bears considerably energy efficient, and that it reduces energy consumption at least 14% and 12%, compared with the constant air volume and variable air volume system, respectively.

Optimization of Energy Consumption Using BIM-Based Building Energy Performance Analysis

2013 ◽  
Vol 281 ◽  
pp. 649-652 ◽  
Author(s):  
Dae Kyo Jung ◽  
Dong Hwan Lee ◽  
Joo Ho Shin ◽  
Byung Hun Song ◽  
Seung Hee Park
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Performance Analysis ◽  
Cooling System ◽  
Optimization Technique ◽  
Building Energy ◽  
Energy Performance ◽  
Information Modeling ◽  
Building Energy Performance ◽  
Heating And Cooling

Recently, the interest in increasing energy efficiency of building energy management system (BEMS) has become a high-priority and thus the related studies also increased. In particular, since the energy consumption in terms of heating and cooling system takes a large portion of the energy consumed in buildings, it is strongly required to enhance the energy efficiency through intelligent operation and/or management of HVAC (Heating, Ventilation and Air Conditioning) system. To tackle this issue, this study deals with the BIM (Building Information Modeling)-based energy performance analysis implemented in Energyplus. The BIM model constructed at Revit is updated at Design Builder, adding HVAC models and converted compatibly with the Energyplus environment. And then, the HVAC models are modified throughout the comparison between the energy consumption patterns and the real-time monitoring in-field data. In order to maximize the building energy performance, a genetic algorithm (GA)-based optimization technique is applied to the modified HVAC models. Throughout the proposed building energy simulation, finally, the best optimized HVAC control schedule for the target building can be obtained in the form of “supply air temperature schedule”.

scholarly journals Energy consumption and modelling of the climate control system in the electric vehicle

2018 ◽  
Vol 37 (1) ◽  
pp. 519-543 ◽  
Author(s):  
Aisling Doyle ◽  
Tariq Muneer
Keyword(s):  
Control System ◽  
Energy Consumption ◽  
Electric Vehicle ◽  
Waste Heat ◽  
Cooling System ◽  
Weather Conditions ◽  
Mean Bias Error ◽  
Space Heating ◽  
Climate Control ◽  
Heating And Cooling

With the introduction of electric vehicles in the automobile market, limited information is available on how the battery’s energy consumption is distributed. This paper focuses on the energy consumption of the vehicle when the heating and cooling system is in operation. On average, 18 and 14% for the battery’s energy capacity is allocated to heating and cooling requirements, respectively. The conventional internal combustion engine vehicle uses waste heat from its engine to provide for passenger thermal requirements at no cost to the vehicle’s propulsion energy demands. However, the electric vehicle cannot avail of this luxury to recycle waste heat. In order to reduce the energy consumed by the climate control system, an analysis of the temperature profile of a vehicle’s cabin space under various weather conditions is required. The present study presents a temperature predicting algorithm to predict temperature under various weather conditions. Previous studies have limited consideration to the fluctuation of solar radiation space heating to a vehicle’s cabin space. This model predicts solar space heating with a mean bias error and root mean square error of 0.26 and 0.57°C, respectively. This temperature predicting model can potentially be developed with further research to predict the energy required by the vehicle’s primary lithium-ion battery to heat and cool the vehicle’s cabin space. Thus, this model may be used in a route planning application to reduce range anxiety when drivers undertake a journey under various ambient weather conditions while optimising the energy consumption of the electric vehicle.

scholarly journals Preliminary investigation of thermal behaviour of PCM based latent heat thermal energy storage

2018 ◽  
Vol 32 ◽  
pp. 01017
Author(s):  
Octavian G. Pop ◽  
Lucian Fechete Tutunaru ◽  
Florin Bode ◽  
Mugur C. Balan
Keyword(s):  
Energy Consumption ◽  
Energy Storage ◽  
Latent Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Cooling System ◽  
Air Cooling ◽  
Air Velocity ◽  
Air Inlet ◽  
Air Cooling System

Solid-liquid phase change is used to accumulate and release cold in latent heat thermal energy storage (LHTES) in order to reduce energy consumption of air cooling system in buildings. The storing capacity of the LHTES depends greatly on the exterior air temperatures during the summer nights. One approach in intensifying heat transfer is by increasing the air’s velocity. A LHTES was designed to be integrated in the air cooling system of a building located in Bucharest, during the month of July. This study presents a numerical investigation concerning the impact of air inlet temperatures and air velocity on the formation of solid PCM, on the cold storing capacity and energy consumption of the LHTES. The peak amount of accumulated cold is reached at different air velocities depending on air inlet temperature. For inlet temperatures of 14°C and 15°C, an increase of air velocity above 50% will not lead to higher amounts of cold being stored. For Bucharest during the hottest night of the year, a 100 % increase in air velocity will result in 5.02% more cold being stored, at an increase in electrical energy consumption of 25.30%, when compared to the reference values.

scholarly journals Controlling the Distribution of Cold Water in Air Cooling Systems of Underground Mines

2016 ◽  
Vol 61 (4) ◽  
pp. 793-807 ◽  
Author(s):  
Nikodem Szlązak ◽  
Dariusz Obracaj ◽  
Justyna Swolkień ◽  
Kazimierz Piergies
Keyword(s):  
Automatic Control ◽  
Water Flow ◽  
Flow Rate ◽  
Cold Water ◽  
Cooling System ◽  
Water Flow Rate ◽  
Underground Mines ◽  
Air Cooling ◽  
Cooling Systems ◽  
Pipeline Network

Abstract In Polish underground mines in which excavations are subjected to high heat load, central and group cooling systems based on indirect cooling units are implemented. Chilled water, referred to as cold water and produced in chillers, is distributed through a pipeline network to air coolers located in mining and development districts. The coolers are often moved to other locations and the pipeline network undergoes constant modification. In such a system, parameters of cold water in different branches of the pipeline network need to be controlled. The article presents the principles for controlling the cooling capacity of air coolers installed in an underground mine. Also, the authors propose automatic control of water flow rate in underground pipeline network and in particular coolers, depending on the temporary cooling load in the system. The principles of such a system, controlling cold water distribution, and the functions of its individual components are described. Finally, an example of an automatic control of water flow rate in a central cooling system currently implemented in a mine is presented.

scholarly journals Life Cycle Assessment of Dynamic Water Flow Glazing Envelopes: A Case Study with Real Test Facilities

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2195
Author(s):  
Belen Moreno Santamaria ◽  
Fernando del Ama Gonzalo ◽  
Matthew Griffin ◽  
Benito Lauret Aguirregabiria ◽  
Juan A. Hernandez Ramos
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Co2 Emissions ◽  
Water Flow ◽  
Life Cycle Cost ◽  
Energy Savings ◽  
Economic Benefits ◽  
Real World Data ◽  
Heating And Cooling

High initial costs hinder innovative technologies for building envelopes. Life Cycle Assessment (LCA) should consider energy savings to show relevant economic benefits and potential to reduce energy consumption and CO2 emissions. Life Cycle Cost (LCC) and Life Cycle Energy (LCE) should focus on investment, operation, maintenance, dismantling, disposal, and/or recycling for the building. This study compares the LCC and LCE analysis of Water Flow Glazing (WFG) envelopes with traditional double and triple glazing facades. The assessment considers initial, operational, and disposal costs and energy consumption as well as different energy systems for heating and cooling. Real prototypes have been built in two different locations to record real-world data of yearly operational energy. WFG systems consistently showed a higher initial investment than traditional glazing. The final Life Cycle Cost analysis demonstrates that WFG systems are better over the operation phase only when it is compared with a traditional double-glazing. However, a Life Cycle Energy assessment over 50 years concluded that energy savings between 36% and 66% and CO2 emissions reduction between 30% and 70% could be achieved.

Sign in / Sign up

Export Citation Format

Share Document