scholarly journals Techno-Economic Assessment of Battery Electric Trains and Recharging Infrastructure Alternatives Integrating Adjacent Renewable Energy Sources

2021 ◽  
Vol 13 (15) ◽  
pp. 8234
Author(s):  
Christoph Streuling ◽  
Johannes Pagenkopf ◽  
Moritz Schenker ◽  
Kim Lakeit
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Rail Transport ◽  
Energy Sources ◽  
Overhead Line ◽  
Model Based ◽  
Direct Use

Battery electric multiple units (BEMU) are an effective path towards a decarbonized regional rail transport on partly electrified rail lines. As a means of sector coupling, the BEMU recharging energy demand provided through overhead line islands can be covered from decentralized renewable energy sources (RES). Thus, fully carbon-free electricity for rail transport purposes can be obtained. In this study, we analyze cost reduction potentials of efficient recharging infrastructure positioning and the feasibility of covering BEMU energy demand by direct-use of locally produced renewable electricity. Therefore, we set up a model-based approach which assesses relevant lifecycle costs (LCC) of different trackside electrification alternatives comparing energy supply from local RES and grid consumption. The model-based approach is applied to the example of a German regional rail line. In the case of an overhead line island, the direct-use of electricity from adjacent wind power plants with on-site battery storage results in relevant LCC of EUR 173.4 M/30a, while grid consumption results in EUR 176.2 M/30a whereas full electrification results in EUR 224.5 M/30a. Depending on site-specific factors such as existing electrification and line lengths, BEMU operation and partial overhead line extension can lead to significant cost reductions of recharging infrastructure as compared to full electrification.

scholarly journals ECOLOGICAL AND ECONOMIC ASSESSMENT OF THE CONSEQUENCES OF THE USE OF RENEWABLE ENERGY SOURCES

2020 ◽  
pp. 35-44
Author(s):  
A. Pavlyk ◽  
A. Zhulavskyi ◽  
Iu. Shkodkina ◽  
M. Maslii
Keyword(s):  
Renewable Energy ◽  
Life Cycle ◽  
Environmental Economic ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Economic Consequences ◽  
Energy Sources ◽  
Energy Product ◽  
Harmful Substances

The article is devoted to the problem of an environmental-economic assessment of consequences of using renewable energy sources. The existing system for assessing environmental-economic consequences of energy production can be applied only to traditional energy sources — combined heat and power plants (CHP plants), thermal power plants (TPP), and atomic power plants, since it is unviable to apply it for renewable energy sources. The reason lies in the peculiar features of renewable energy sources — they do not use exhaustible energy resources for the purpose of energy generation and have a small minimum size of a power station, which makes renewable energy sources more mobile and available for the use in the private sector of economy. This article proposes a methodology of an environmental-economic assessment of the consequences of energy generation from renewable energy sources, which takes into account the features of renewable energy sources use in comparison to traditional ones. In this paper, we analyze shortcomings of the existing methodology for assessing consequences of harmful substances emissions into the atmosphere and propose our own methodology. It includes a life cycle theory of an energy product, which allows to identify environmental-economic consequences at every stage of the life cycle of an energy product and to assess them. For an objective assessment we used statistical data and existing calculations from domestic scientists on a correlation between the number of diseases and volume of harmful substances emissions into the atmosphere. The methodology allows to assess and compare environmental-economic consequences of the development of a particular energy source in relation to other sources. Despite the generally accepted opinion that there are no environmental and economic consequences of the use of renewable energy sources, this paper proves that renewable energy sources have such an impact at different stages of their life cycle. Research findings and calculations in this paper allow to use existing mathematical tools to develop optimal models for the energy sector development of Ukraine. The proposed methodology can be applied to other countries in order to identify its shortcomings and develop further this methodology of assessment.

scholarly journals THE SELECTION OF A SMALL HYDRO POWER PLANT (SHPP) SOLUTION IN LINE WITH THE ECOSYSTEM

2019 ◽  
pp. 229
Author(s):  
Zivojin Stamenkovic ◽  
Dragan Svrkota
Keyword(s):  
Renewable Energy ◽  
Environmental Protection ◽  
Energy Demand ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Design Solution ◽  
Energy Sources ◽  
Technical Solution ◽  
Hydro Power ◽  
Hydro Power Plants

Population growth and new forms of energy use have the effect that the energy demand grows year after year. The harmful influence of the use of fossil and nuclear fuels has influenced the intensive development of renewable energy sources (solar energy, small hydro power plants, wind energy, bio-renewable sources - biomass, geothermal energy). This paper gives an overview of the choice of design solution, technical parameters and the efficiency of small hydro power plants (SHPP) on small watercourses. Special attention in these considerations is dedicated to harmonization of selected solutions with natural resources and protection of ecosystems. In order to define the technical solution of one small HPP on a small watercourse, the following analyzes and studies need to be done: Hydrological study; Analysis of the available hydro potential; Pre-feasibility study of the chosen technical solution; Study on Environmental Impact Assessment; Analysis of the investment value of the elements of the system and the system as a whole; Analysis of annual fees and expenses. In analyzing the available hydro potential, it is necessary to examine in detail the influence of the minimum sustainable flow rate in the watercourse (biological minimum) both from the aspect of environmental protection and from the aspect of the techno-economic justification for SHPP construction. On the basis of the "cross-cutting" of the results of these analyzes, one can see the techno-economically justified solution for the construction of SHPP in line with the ecosystem. The goal of all previous analyzes is to select a technical solution that maximizes the use of hydro power potential and ensures optimum use of renewable energy sources, while paying special attention to ecology, environmental protection and sustainable development.

scholarly journals Spatial Analysis of Renewable Energy Sources

2021 ◽  
Vol 25 (1) ◽  
pp. 865-878
Author(s):  
Marika Kacare ◽  
Ieva Pakere ◽  
Armands Grāvelsiņš ◽  
Dagnija Blumberga
Keyword(s):  
Spatial Distribution ◽  
Renewable Energy ◽  
Energy Demand ◽  
Industrial Development ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Use Of Resources ◽  
Eu Directive

Abstract Renewable energy sources are expanding opportunities for industrial development and can boost economic growth and create new jobs. In all European Union (EU) countries, including Latvia, it is possible to use renewable energy resources cost-effectively. The world is now at the beginning of the global energy transformation. Cost-effective renewable energy technologies provided an opportunity for sufficient development to reach ambitious climate targets of the EU Directive 2009/28/EC. Some systems are not only dependent on the interaction of many elements and dynamics over time, but they are also variable in space. In this context, energy production from local and renewable resources is one of the most relevant examples. It is characterized by many spatially variable elements, such as biomass availability, wind speed, solar radiation, location of power plants, transmission network infrastructure, energy demand, etc. It is crucial to explore the spatial distribution of resources to plan territorially-unified development of renewable energy and, consequently, promote efficient use of resources. This paper describes the data acquisition process of the spatial distribution of renewable energy sources. ArcGIS PRO and data collected from the various databases were used to describe the energy sectors according to resources, spheres of consumption and regions.

scholarly journals Techno-Economic Analysis of a Novel Hydrogen-Based Hybrid Renewable Energy System for Both Grid-Tied and Off-Grid Power Supply in Japan: The Case of Fukushima Prefecture

2020 ◽  
Vol 10 (12) ◽  
pp. 4061 ◽  
Author(s):  
Naoto Takatsu ◽  
Hooman Farzaneh
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Energy System ◽  
Modeling Framework ◽  
Integrated Simulation ◽  
Hybrid Renewable Energy System ◽  
Renewable Energy System ◽  
Hybrid Renewable Energy

After the Great East Japan Earthquake, energy security and vulnerability have become critical issues facing the Japanese energy system. The integration of renewable energy sources to meet specific regional energy demand is a promising scenario to overcome these challenges. To this aim, this paper proposes a novel hydrogen-based hybrid renewable energy system (HRES), in which hydrogen fuel can be produced using both the methods of solar electrolysis and supercritical water gasification (SCWG) of biomass feedstock. The produced hydrogen is considered to function as an energy storage medium by storing renewable energy until the fuel cell converts it to electricity. The proposed HRES is used to meet the electricity demand load requirements for a typical household in a selected residential area located in Shinchi-machi in Fukuoka prefecture, Japan. The techno-economic assessment of deploying the proposed systems was conducted, using an integrated simulation-optimization modeling framework, considering two scenarios: (1) minimization of the total cost of the system in an off-grid mode and (2) maximization of the total profit obtained from using renewable electricity and selling surplus solar electricity to the grid, considering the feed-in-tariff (FiT) scheme in a grid-tied mode. As indicated by the model results, the proposed HRES can generate about 47.3 MWh of electricity in all scenarios, which is needed to meet the external load requirement in the selected study area. The levelized cost of energy (LCOE) of the system in scenarios 1 and 2 was estimated at 55.92 JPY/kWh and 56.47 JPY/kWh, respectively.

scholarly journals Analyzing Trade in Continuous Intra-Day Electricity Market: An Agent-Based Modeling Approach

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3860
Author(s):  
Priyanka Shinde ◽  
Ioannis Boukas ◽  
David Radu ◽  
Miguel Manuel de Manuel de Villena ◽  
Mikael Amelin
Keyword(s):  
Renewable Energy ◽  
Electricity Market ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Agent Based Modeling ◽  
Market Liquidity ◽  
Energy Sources ◽  
Modeling Framework ◽  
Agent Based

In recent years, the vast penetration of renewable energy sources has introduced a large degree of uncertainty into the power system, thus leading to increased trading activity in the continuous intra-day electricity market. In this paper, we propose an agent-based modeling framework to analyze the behavior and the interactions between renewable energy sources, consumers and thermal power plants in the European Continuous Intra-day (CID) market. Additionally, we propose a novel adaptive trading strategy that can be used by the agents that participate in CID market. The agents learn how to adapt their behavior according to the arrival of new information and how to react to changing market conditions by updating their willingness to trade. A comparative analysis was performed to study the behavior of agents when they adopt the proposed strategy as opposed to other benchmark strategies. The effects of unexpected outages and information asymmetry on the market evolution and the market liquidity were also investigated.

Power Cycles of Generation III and III+ Nuclear Power Plants

2014 ◽  
Author(s):  
Alexey Dragunov ◽  
Eugene Saltanov ◽  
Igor Pioro ◽  
Pavel Kirillov ◽  
Romney Duffey
Keyword(s):  
Renewable Energy ◽  
Natural Gas ◽  
Thermal Efficiency ◽  
Nuclear Power ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Thermal Power Plants

It is well known that the electrical-power generation is the key factor for advances in any other industries, agriculture and level of living. In general, electrical energy can be generated by: 1) non-renewable-energy sources such as coal, natural gas, oil, and nuclear; and 2) renewable-energy sources such as hydro, wind, solar, biomass, geothermal and marine. However, the main sources for electrical-energy generation are: 1) thermal - primary coal and secondary natural gas; 2) “large” hydro and 3) nuclear. The rest of the energy sources might have visible impact just in some countries. Modern advanced thermal power plants have reached very high thermal efficiencies (55–62%). In spite of that they are still the largest emitters of carbon dioxide into atmosphere. Due to that, reliable non-fossil-fuel energy generation, such as nuclear power, becomes more and more attractive. However, current Nuclear Power Plants (NPPs) are way behind by thermal efficiency (30–42%) compared to that of advanced thermal power plants. Therefore, it is important to consider various ways to enhance thermal efficiency of NPPs. The paper presents comparison of thermodynamic cycles and layouts of modern NPPs and discusses ways to improve their thermal efficiencies.

Modelling of an Optimized Microgrid Model by Integrating DG Distributed Generation Sources to IEEE 13 Bus System

2021 ◽  
Vol 5 (2) ◽  
pp. 18-25
Author(s):  
Bisma Imtiaz ◽  
Imran Zafar ◽  
Cui Yuanhui
Keyword(s):  
Renewable Energy ◽  
Distributed Generation ◽  
Energy Demand ◽  
High Reliability ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Efficient Manner ◽  
Matlab Simulink ◽  
Control Scheme ◽  
Power Quality Improvement

Due to the rapid increase in energy demand with depleting conventional sources, the world’s interest is moving towards renewable energy sources. Microgrid provides easy and reliable integration of distributed generation (DG) units based on renewable energy sources to the grid. The DG’s are usually integrated to microgrid through inverters. For a reliable operation of microgrid, it must have to operate in grid connected as well as isolated mode. Due to sudden mode change, performance of the DG inverter system will be compromised. Design and simulation of an optimized microgrid model in MATLAB/Simulink is presented in this work. The goal of the designed model is to integrate the inverter-interfaced DG’s to the microgrid in an efficient manner. The IEEE 13 bus test feeder has been converted to a microgrid by integration of DG’s including diesel engine generator, photovoltaic (PV) block and battery. The main feature of the designed MG model is its optimization in both operated modes to ensure the high reliability. For reliable interconnection of designed MG model to the power grid, a control scheme for DG inverter system based on PI controllers and DQ-PLL (phase-locked loop) has been designed. This designed scheme provides constant voltage in isolated mode and constant currents in grid connected mode. For power quality improvement, the regulation of harmonic current insertion has been performed using LCL filter. The performance of the designed MG model has been evaluated from the simulation results in MATLAB/ Simulink.

Kazakhstan: Assessment of Renewable Energy Support and a Green Economy

2021 ◽  
Vol 12 (3) ◽  
pp. 631
Author(s):  
Sergey BESPALYY
Keyword(s):  
Economic Growth ◽  
Renewable Energy ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
The State ◽  
Green Economy ◽  
Energy Sources ◽  
Environmentally Sustainable ◽  
The Government ◽  
The Impact

The growth of renewable energy sources (RES) shows the desire of the government of Kazakhstan to meet challenges that affect the welfare and development of the state. National targets, government programs, policies influence renewable energy strategies. In the future, renewable energy technologies will act as sources of a green economy and sustainable economic growth. The state policy in the field of energy in Kazakhstan is aimed at improving the conditions for the development and support of renewable energy sources, amendments are being made to provide for the holding of auctions for new RES projects, which replaces the previously existing system of fixed tariffs. It is expected that the costs of traditional power plants for the purchase of renewable energy will skyrocket, provided that the goals in the field of renewable generation are achieved. This article provides an assessment of international experience in supporting renewable energy sources, as well as analyzes the current situation in the development of renewable energy in Kazakhstan and the impact on sustainable development and popularization of the «green» economy. The study shows that by supporting the development of renewable energy sources, economic growth is possible, which is achieved in an environmentally sustainable way.

Sign in / Sign up

Export Citation Format

Share Document