scholarly journals A Review on Life Cycle Assessment of the Olive Oil Production

2022 ◽  
Vol 14 (2) ◽  
pp. 654
Author(s):  
Mattia Rapa ◽  
Salvatore Ciano
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impact ◽  
Olive Oil ◽  
Production Process ◽  
Environmental Impacts ◽  
Environmental Indicators ◽  
Special Focus ◽  
Oil Supply

Olive oil is one of the most globally recognized high-value products, with 4 million hectares cultivated in the Mediterranean area. The production process involves many stages: farming, extraction, packing, and waste treatment. Each one of these stages should present critical points for the environmental impacts, and for this reason, the entire sector is adopting mitigation strategies to begin to be more sustainable. The mitigation actions’ efficiency should be evaluated through environmental indicators or environmental impact assessment by Life Cycle Assessment (LCA). This review aimed to carry out an overview of recent papers (2011–2021) involving an LCA study in the olive oil supply chain by giving a framework of what is included in LCA studies and highlighting the main contributors to environmental impacts. The main scholarly literature databases have been exploited, highlighting a great increase in publications, especially from the producer countries. The review results reflect the heterogeneity of the production process. However, the use of pesticides, fertilizers, water, and fuel for machinery heavily weigh on the farming stage’s environmental impact. Finally, special focus was given to key elements of LCA studies in the olive oil supply chain, such as functional unit, system boundaries, impact categories, calculation method, and software widely used.

scholarly journals An Environmental Evaluation of the Cut-Flower Supply Chain (Dendranthema grandiflora) Through a Life Cycle Assessment

Revista EIA ◽  
2019 ◽  
Vol 16 (31) ◽  
pp. 27-42 ◽  
Author(s):  
Carmen Alicia Parrado Moreno ◽  
Ricardo Esteba Ricardo Hernández ◽  
Héctor Iván Velásquez Arredondo ◽  
Sergio Hernando Lopera Castro ◽  
Christian Hasenstab --
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Raw Material ◽  
Cut Flowers ◽  
Environmental Evaluation ◽  
Fertilizer Use ◽  
Transport Phase

Colombia is a major flower exporter of a wide variety of species, among which the chrysanthemum plays a major role due to its exporting volume and profitability on the international market. This study examines the major environmental impacts of the chrysanthemum supply chain through a life cycle assessment (LCA). One kg of stems export quality was used as the functional unit (FU). The study examines cut-flowers systems from raw material extraction to final product commercialization for two markets (London and Miami) and analyzes two agroecosystems: one certified system and one uncertified system. The transport phase to London resulted in more significant environmental impacts than the transport phase to Miami, and climate change (GWP100) category was significant in both cities, generating values of 9.10E+00 and 2.51E+00 kg CO2-eq*FU for London and Miami, respectively. Furthermore, when exclusively considering pre-export phases, the uncertified system was found to have a greater impact than the certified system with respect to fertilizer use (certified 1,448E-02 kg*FU, uncertified 2.23E-01 kg*FU) and pesticide use (certified 1.24 E-04 kg*FU, uncertified 2.24E-03 kg*FU). With respect to the crop management, eutrophication (EP) and acidification (AP) processes imposed the greatest level of environmental impact. Strategies that would significantly reduce the environmental impact of this supply chain are considered, including the use of shipping and a 50% reduction in fertilizer use.

scholarly journals Analysis of the Characteristics of Environmental Impacts According to the Cut-Off Criteria Applicable to the Streamlined Life Cycle Assessment (S-LCA) of Apartment Buildings in South Korea

2021 ◽  
Vol 13 (5) ◽  
pp. 2898
Author(s):  
Rakhyun Kim ◽  
Myung-Kwan Lim ◽  
Seungjun Roh ◽  
Won-Jun Park
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Impact Analysis ◽  
Impact Categories ◽  
Environmental Impact Analysis ◽  
Apartment Buildings ◽  
Environmental Impact Categories ◽  
Weight Percentile

This study analyzed the characteristics of the environmental impacts of apartment buildings, a typical housing type in South Korea, as part of a research project supporting the streamlined life cycle assessment (S-LCA) of buildings within the G-SEED (Green Standard for Energy and Environmental Design) framework. Three recently built apartment building complexes were chosen as study objects for the quantitative evaluation of the buildings in terms of their embodied environmental impacts (global warming potential, acidification potential, eutrophication potential, ozone layer depletion potential, photochemical oxidant creation potential, and abiotic depletion potential), using the LCA approach. Additionally, we analyzed the emission trends according to the cut-off criteria of the six environmental impact categories by performing an S-LCA with cut-off criteria 90–99% of the cumulative weight percentile. Consequently, we were able to present the cut-off criterion best suited for S-LCA and analyze the effect of the cut-off criteria on the environmental impact analysis results. A comprehensive environmental impact analysis of the characteristics of the six environmental impact categories revealed that the error rate was below 5% when the cut-off criterion of 97.5% of the cumulative weight percentile was applied, thus verifying its validity as the optimal cut-off criterion for S-LCA.

Der Umsatz-Nachhaltigkeitsindex*/The Turnover-Sustainability-Index

2016 ◽  
Vol 106 (03) ◽  
pp. 136-140
Author(s):  
R. Miehe ◽  
M. Wiedenmann ◽  
T. Prof. Bauernhansl
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Sustainability Index ◽  
Behavior Based ◽  
Comparative Examination

Die Ökobilanz hat sich als Instrument zur Bewertung der Umweltauswirkungen von Produkten und Prozessen durchgesetzt. Dennoch stellt ihre Durchführung Nutzer immer wieder vor Herausforderungen. Der Fachartikel präsentiert einen Ansatz für eine vergleichende Betrachtung der ökologischen Auswirkungen des unternehmerischen Handelns auf Basis der jeweiligen Unternehmens- und Branchenumsätze. Der Umsatz-Nachhaltigkeitsindex soll als Konzept für ein Benchmark für Unternehmen einer Branche dienen.   Life Cycle Assessment has prevailed as an instrument to evaluate the environmental impact of products and processes. Its execution, however, poses a challenge to operators. In this paper, we present an approach for a comparative examination of environmental impacts of industrial behavior based on the turnover of companies and their equivalent sectors. The Turnover-Sustainability-Index serves as a benchmark for companies within a sector.

scholarly journals Environmental Impact for 3D Bone Tissue Engineering Scaffolds Life Cycle: An Assessment

2021 ◽  
Vol 12 (5) ◽  
pp. 6504-6515
Keyword(s):  
Tissue Engineering ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Environmental Impacts ◽  
Tissue Engineering Scaffolds ◽  
Industrial Soil ◽  
The Impact

With the development of additive manufacturing technology, 3D bone tissue engineering scaffolds have evolved. Bone tissue engineering is one of the techniques for repairing bone abnormalities caused by a variety of circumstances, such as injuries or the need to support damaged sections. Many bits of research have gone towards developing 3D bone tissue engineering scaffolds all across the world. The assessment of the environmental impact, on the other hand, has received less attention. As a result, the focus of this study is on developing a life cycle assessment (LCA) model for 3D bone tissue engineering scaffolds and evaluating potential environmental impacts. One of the methodologies to evaluating a complete environmental impact assessment is life cycle assessment (LCA). The cradle-to-grave method will be used in this study, and GaBi software was used to create the analysis for this study. Previous research on 3D bone tissue engineering fabrication employing poly(ethylene glycol) diacrylate (PEGDA) soaked in dimethyl sulfoxide (DMSO), and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO) as a photoinitiator will be reviewed. Meanwhile, digital light processing (DLP) 3D printing is employed as the production technique. The GaBi program and the LCA model developed to highlight the potential environmental impact. This study shows how the input and output of LCA of 3D bone tissue engineering scaffolds might contribute to environmental issues such as air, freshwater, saltwater, and industrial soil emissions. The emission contributing to potential environmental impacts comes from life cycle input, electricity and transportation consumption, manufacturing process, and material resources. The results from this research can be used as an indicator for the researcher to take the impact of the development of 3D bone tissue engineering on the environment seriously.

scholarly journals Application of Life Cycle Assessment and Machine Learning for High-Throughput Screening of Green Chemical Substitutes

2020 ◽  
Author(s):  
Xinzhe Zhu ◽  
Chi-Hung Ho ◽  
Xiaonan Wang
Keyword(s):  
Machine Learning ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Production Process ◽  
Environmental Impacts ◽  
High Throughput ◽  
High Throughput Screening ◽  
Molecular Descriptors ◽  
Trifluoroacetic Anhydride ◽  
Chemical Materials

<p><a></a><a>The production process of many active pharmaceutical ingredients such as sitagliptin could cause severe environmental problems due to the use of toxic chemical materials and production infrastructure, energy consumption and wastes treatment. The environmental impacts of sitagliptin production process were estimated with life cycle assessment (LCA) method, which suggested that the use of chemical materials provided the major environmental impacts. Both methods of Eco-indicator 99 and ReCiPe endpoints confirmed that chemical feedstock accounted 83% and 70% of life-cycle impact, respectively. Among all the chemical materials used in the sitagliptin production process, </a><a>trifluoroacetic anhydride </a>was identified as the largest influential factor in most impact categories according to the results of ReCiPe midpoints method. Therefore, high-throughput screening was performed to seek for green chemical substitutes to replace the target chemical (i.e. trifluoroacetic anhydride) by the following three steps. Firstly, thirty most similar chemicals were obtained from two million candidate alternatives in PubChem database based on their molecular descriptors. Thereafter, deep learning neural network models were developed to predict life-cycle impact according to the chemicals in Ecoinvent v3.5 database with known LCA values and corresponding molecular descriptors. Finally, 1,2-ethanediyl ester was proved to be one of the potential greener substitutes after the LCA data of these similar chemicals were predicted using the well-trained machine learning models. The case study demonstrated the applicability of the novel framework to screen green chemical substitutes and optimize the pharmaceutical manufacturing process.</p>

Life cycle assessment of organic Parmesan Cheese considering the whole dairy supply chain

2019 ◽  
Author(s):  
Giulia Borghesi ◽  
Giuseppe Vignali
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impact ◽  
Carbon Footprint ◽  
Water Consumption ◽  
Organic Agriculture ◽  
Water Footprint ◽  
Dairy Farm ◽  
Parmesan Cheese

Agriculture and food manufacturing have a considerable effect on the environment emissions: holdings and farms play an important role about greenhouse gas emissions and water consumption. This study aims at evaluating the environmental impact of one of the most important Italian DOP product: organic Parmesan Cheese. Environmental performances of the whole dairy supply chain have been assessed according to the life cycle assessment approach (LCA). In this analysis Parmesan Cheese is made from an organic dairy farm in Emilia Romagna, which uses the milk from three different organic livestock productions. Organic agriculture is different from conventional; the major difference is represented by the avoidance of the use of synthetic fertilizers and pesticides made in chemical industry process. Organic agriculture uses organic fertilizers to encourage the natural fertility of the soil respecting the environment and the agro-system. In this case, life cycle approach is used to assess the carbon footprint and the water footprint of organic Parmesan Cheese considering the milk and cheese production. The object at this level is investigating the environmental impact considering the situation before some improvement changes. The functional unit is represented by 1 kg of organic Parmesan Cheese; inventory data refer to the situation in year 2017 and system boundaries consider the inputs related to the cattle and dairy farm until the ripening (included). The carbon footprint is investigated using IPCC 2013 Global Warming Potential (GWP) 100a method, developed by Intergovernmental Panel on Climate Change, and reported in kg of CO2eq. Otherwise, water footprint allows to measure the water consumption and in this work it is assessed using AWARE method (Available Water REmaining).

Environmental impacts of roundwood supply chain options in Michigan: life-cycle assessment of harvest and transport stages

2014 ◽  
Vol 76 ◽  
pp. 64-73 ◽  
Author(s):  
Robert M. Handler ◽  
David R. Shonnard ◽  
Pasi Lautala ◽  
Dalia Abbas ◽  
Ajit Srivastava
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impacts

scholarly journals Life Cycle Assessment of Dietary Patterns in the United States: A Full Food Supply Chain Perspective

2020 ◽  
Vol 12 (4) ◽  
pp. 1586 ◽  
Author(s):  
Daesoo Kim ◽  
Ranjan Parajuli ◽  
Gregory J. Thoma
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
The United States ◽  
Vegetarian Diet ◽  
Dietary Guidelines ◽  
Consumption Patterns ◽  
Consumption Pattern

A tiered hybrid input–output-based life cycle assessment (LCA) was conducted to analyze potential environmental impacts associated with current US food consumption patterns and the recommended USDA food consumption patterns. The greenhouse gas emissions (GHGEs) in the current consumption pattern (CFP 2547 kcal) and the USDA recommended food consumption pattern (RFP 2000 kcal) were 8.80 and 9.61 tons CO2-eq per household per year, respectively. Unlike adopting a vegetarian diet (i.e., RFP 2000 kcal veg or RFP 2600 kcal veg), adoption of a RFP 2000 kcal diet has a probability of increasing GHGEs and other environmental impacts under iso-caloric analysis. The bigger environmental impacts of non-vegetarian RFP scenarios were largely attributable to supply chain activities and food losses at retail and consumer levels. However, the RFP 2000 vegetarian diet showed a significant reduction in the environmental impacts (e.g., GHGEs were 22% lower than CFP 2547). Uncertainty analysis confirmed that the RFP 2600 scenario (mean of 11.2; range 10.3–12.4 tons CO2-eq per household per year) is higher than CFP 2547 (mean of 8.81; range 7.89–9.95 tons CO2-eq per household per year) with 95% confidence. The outcomes highlight the importance of incorporating environmental sustainability into dietary guidelines through the entire life cycle of the food system with a full accounting of the effects of food loss/waste.

scholarly journals Process simulation and gate-to-gate life cycle assessment of hydrometallurgical refractory gold concentrate processing

2019 ◽  
Vol 25 (3) ◽  
pp. 456-477 ◽  
Author(s):  
Heini Elomaa ◽  
Pia Sinisalo ◽  
Lotta Rintala ◽  
Jari Aromaa ◽  
Mari Lundström
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Process Simulation ◽  
Development Stage ◽  
Environmental Indicators ◽  
Gold Recovery ◽  
Pressure Oxidation ◽  
Refractory Gold

Abstract Purpose Currently, almost all cyanide-free gold leaching processes are still in the development stage. Proactively investigating their environmental impacts prior to commercialization is of utmost importance. In this study, a detailed refractory gold concentrate process simulation with mass and energy balance was built for state-of-the-art technology with (i) pressure oxidation followed by cyanidation and, compared to alternative cyanide-free technology, with (ii) pressure oxidation followed by halogen leaching. Subsequently, the simulated mass balance was used as life cycle inventory data in order to evaluate the environmental impacts of the predominant cyanidation process and a cyanide-free alternative. Methods The environmental indicators for each scenario are based on the mass balance produced with HSC Sim steady-state simulation. The simulated mass balances were evaluated to identify the challenges in used technologies. The HSC Sim software is compatible with the GaBi LCA software, where LCI data from HSC-Sim is directly exported to. The simulation produces a consistent life cycle inventory (LCI). In GaBi LCA software, the environmental indicators of global warming potential (GWP), acidification potential (AP), terrestrial eutrophication potential (EP), and water depletion (Water) are estimated. Results and discussion The life cycle assessment revealed that the GWP for cyanidation was 10.1 t CO2-e/kg Au, whereas the halogen process indicated a slightly higher GWP of 12.6 t CO2-e/kg Au. The difference is partially explained by the fact that the footprint is calculated against produced units of Au; total recovery by the halogen leaching route for gold was only 87.3%, whereas the cyanidation route could extract as much as 98.5% of gold. The addition of a second gold recovery unit to extract gold also from the washing water in the halogen process increased gold recovery up to 98.5%, decreasing the GWP of the halogen process to 11.5 t CO2-e/kg Au. However, both evaluated halogen processing scenarios indicated a slightly higher global warming potential when compared to the dominating cyanidation technology. Conclusions The estimated environmental impacts predict that the development-stage cyanide-free process still has some challenges compared to cyanidation; as in the investigated scenarios, the environmental impacts were generally higher for halogen leaching. Further process improvements, for example in the form of decreased moisture in the feed for halide leaching, and the adaptation of in situ gold recovery practices in chloride leaching may give the cyanide-free processing options a competitive edge.

scholarly journals Environmental Impacts of Charging Concepts for Battery Electric Vehicles: A Comparison of On-Board and Off-Board Charging Systems Based on a Life Cycle Assessment

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6508
Author(s):  
Mona Kabus ◽  
Lars Nolting ◽  
Benedict J. Mortimer ◽  
Jan C. Koj ◽  
Wilhelm Kuckshinrichs ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Electric Vehicles ◽  
Economic Effects ◽  
System Level ◽  
Impact Categories ◽  
Dc System ◽  
Battery Electric Vehicles

We investigate the environmental impacts of on-board (based on alternating current, AC) and off-board (based on direct current, DC) charging concepts for electric vehicles using Life Cycle Assessment and considering a maximum charging power of 22 kW (AC) and 50 kW (DC). Our results show that the manufacturing of chargers provokes the highest contribution to environmental impacts of the production phase. Within the chargers, the filters could be identified as main polluters for all power levels. When comparing the results on a system level, the DC system causes less environmental impact than the AC system in all impact categories. In our diffusion scenarios for electric vehicles, annual emission reductions of up to 35 million kg CO2-eq. could be achieved when the DC system is used instead of the AC system. In addition to the environmental assessment, we examine economic effects. Here, we find annual savings of up to 8.5 million euros, when the DC system is used instead of the AC system.

Sign in / Sign up

Export Citation Format

Share Document