scholarly journals Operational Improvement of Main Pumps for Energy-Saving in Wastewater Treatment Plants

Water ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2438 ◽  
Author(s):  
Hiroyuki Kato ◽  
Hiroyuki Fujimoto ◽  
Kenichi Yamashina
Keyword(s):  
Wastewater Treatment ◽  
Power Consumption ◽  
Energy Saving ◽  
Energy Savings ◽  
Rotation Speed ◽  
Wastewater Treatment Plants ◽  
Speed Control ◽  
Operational Improvement ◽  
Energy Independence ◽  
Save Energy

Efforts towards energy independence in wastewater treatment plants (WWTPs) constitute important policy in Japan. Energy-saving strategies consist of operational improvements and the installation of energy-saving devices. The energy consumed by the main pumps is equal to approximately 14% of the energy consumed by WWTPs in average in Japan. The main pumps, which are simple machines, do not have the innovative, energy-saving devices associated with other equipment used in WWTPs; therefore, realizing energy savings through operational improvement is extremely important. In recent years, variable frequency drives (VFDs) have increasingly been used to control the rotation speed of main pumps in order to save energy. However, there are many cases where power consumption increases due to the excessive rotation speed control ignoring pump characteristics. In this study, improvement of the operating method based on the power consumption analysis is examined for A WWTP. Differences in characteristics between water pumps and wastewater pumps are discussed, and simulation results without rotational speed control show a reduction in power consumption of 10%. Daily operational report data of the WWTP are used for the power consumption analysis, and additional data acquisition is not necessary. Thus, the power consumption analysis method used in this study can be easily applied to other WWTPs.

scholarly journals Innovative approaches and methods to the implementation of energy-saving measures and technologies at mining enterprises

2021 ◽  
Vol 288 ◽  
pp. 01109
Author(s):  
Alexander Semenov ◽  
Yuriy Bebikhov ◽  
Ayaal Egorov ◽  
Vladislav Shevchuk ◽  
Marina Glazun ◽  
...  
Keyword(s):  
Power Consumption ◽  
Mathematical Simulation ◽  
Energy Saving ◽  
Electric Drive ◽  
Economic Benefit ◽  
Energy Savings ◽  
Reactive Power ◽  
Specific Power ◽  
Specific Power Consumption ◽  
Instrumental Monitoring

The paper presents the evaluation of the implementation of innovative methods of energy savings in electric drive and power supply systems at mining enterprises. The evaluation involves mathematical simulation and instrumental monitoring of the defined indicators that allow obtaining a multiplier economic benefit through the appropriate approach to the implementation and subsequent exploitation of energy-saving technologies. For this purpose, the potential of energy savings in industry in general, and at mining enterprises in particular, is shown. Such indicators as power consumption in mining, the dynamics of power losses in public grids, specific power consumption for lighting and household needs, specific power consumption for lifting and supplying water, as well as for sewage treatment were evaluated. As an example, such measures as reactive power compensation, the introduction of frequency-controlled electric drive systems, the development and implementation of the systems for continuous monitoring of power quality indicators were considered pointwise (at some sites of enterprises). The mathematical simulation method was implemented using the MatLab software package. The instrumental monitoring was carried for 7 days with a ten-minute interval. As a result of the assessment of such measures, the total economic benefit approaching to 9.0 million rubles a year was obtained.

Understanding intentions to reduce energy consumption at the workplace by the employees: case of a developing country

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Amna Akhound ◽  
Aseem Majeed Rizvi ◽  
Waqar Ahmed ◽  
Muhammad Nadeem Khan
Keyword(s):  
Energy Saving ◽  
Structural Equation ◽  
Energy Use ◽  
Energy Savings ◽  
Theoretical Research ◽  
Equation Modeling ◽  
Survey Method ◽  
Content Type ◽  
Saving Behavior ◽  
Save Energy

PurposeEnergy-saving behavior of individuals is essential to minimize energy use and reduce the emission of toxic gases. This study's actual focus is to find out the determinants of the energy-saving behavior of individuals in the workplace.Design/methodology/approachAs a theoretical research model, the extended theory of planned behavior (TPB) has been used to analyze the determinants of energy-saving intentions. A survey method is used to collect 289 valid data, and structural equation modeling (SEM) is used to analyze the data.FindingsThe final result shows that the variables attitude at home, subjective norm (SN) and descriptive norms positively impact intention to save energy at the workplace. In contrast, the construct attitude and perceived behavior control is insignificant in this research. On the other hand, the personal moral norm (PMN) is a powerful predictor of individual energy-saving intentions at the workplace.Originality/valueThis research provides insights that will help the organizations understand the behavior of individuals at the workplace for energy-saving intentions to formulate such policies that will enhance individuals' practice for energy savings.

Lessons learnt from evaluating full-scale ammonium feedback control in three large wastewater treatment plants

2014 ◽  
Vol 69 (7) ◽  
pp. 1573-1580 ◽  
Author(s):  
L. Åmand ◽  
C. Laurell ◽  
K. Stark-Fujii ◽  
A. Thunberg ◽  
B. Carlsson
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Control Strategies ◽  
Full Scale ◽  
Feedback Controllers ◽  
Energy Assessment ◽  
Different Types ◽  
Term Evaluation ◽  
Save Energy

Three large wastewater treatment plants in Sweden participate in a project evaluating different types of ammonium feedback controllers in full-scale operation. The goal is to improve process monitoring, maintain effluent water quality and save energy. The paper presents the outcome of the long-term evaluation of controllers. Based on the experiences gained from the full-scale implementations, a discussion is provided about energy assessment for the purpose of comparing control strategies. The most important conclusions are the importance of long-term experiments and the difficulty of comparing energy consumption based on air flow rate measurements.

scholarly journals Application and Evaluation of Energy Conservation Technologies in Wastewater Treatment Plants

2019 ◽  
Vol 9 (21) ◽  
pp. 4501 ◽  
Author(s):  
Yongteng Sun ◽  
Ming Lu ◽  
Yongjun Sun ◽  
Zuguo Chen ◽  
Hao Duan ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Saving ◽  
Wastewater Treatment Plants ◽  
System Optimization ◽  
High Energy ◽  
Green Energy ◽  
Application Process ◽  
Conservation Technologies

High energy consumption is an important issue affecting the operation and development of wastewater treatment plants (WWTPs). This paper seeks energy-saving opportunities from three aspects: energy application, process optimization, and performance evaluation. Moreover, effective energy-saving can be achieved from the perspective of energy supply and recovery by using green energy technologies, including wastewater and sludge energy recovery technologies. System optimization and control is used to reduce unnecessary energy consumption in operation. Reasonable indexes and methods can help researchers evaluate the application value of energy-saving technology. Some demonstration WWTPs even can achieve energy self-sufficiency by using these energy conservation technologies. Besides, this paper introduces the challenges faced by the wastewater treatment industry and some emerging energy-saving technologies. The work can give engineers some suggestions about reducing energy consumption from comprehensive perspectives.

scholarly journals Benchmarking of energy consumption in municipal wastewater treatment plants – a survey of over 200 plants in Italy

2018 ◽  
Vol 77 (9) ◽  
pp. 2242-2252 ◽  
Author(s):  
M. Vaccari ◽  
P. Foladori ◽  
S. Nembrini ◽  
F. Vitali
Keyword(s):  
Wastewater Treatment ◽  
Energy Consumption ◽  
Municipal Wastewater ◽  
Energy Savings ◽  
Wastewater Treatment Plants ◽  
Specific Energy Consumption ◽  
Oxygen Demand ◽  
Energy Performance ◽  
High Energy ◽  
Municipal Wastewater Treatment

Abstract One of the largest surveys in Europe about energy consumption in Italian wastewater treatment plants (WWTPs) is presented, based on 241 WWTPs and a total population equivalent (PE) of more than 9,000,000 PE. The study contributes towards standardised resilient data and benchmarking and to identify potentials for energy savings. In the energy benchmark, three indicators were used: specific energy consumption expressed per population equivalents (kWh PE−1 year−1), per cubic meter (kWh/m3), and per unit of chemical oxygen demand (COD) removed (kWh/kgCOD). The indicator kWh/m3, even though widely applied, resulted in a biased benchmark, because highly influenced by stormwater and infiltrations. Plants with combined networks (often used in Europe) showed an apparent better energy performance. Conversely, the indicator kWh PE−1 year−1 resulted in a more meaningful definition of a benchmark. High energy efficiency was associated with: (i) large capacity of the plant, (ii) higher COD concentration in wastewater, (iii) separate sewer systems, (iv) capacity utilisation over 80%, and (v) high organic loads, but without overloading. The 25th percentile was proposed as a benchmark for four size classes: 23 kWh PE−1 y−1 for large plants > 100,000 PE; 42 kWh PE−1 y−1 for capacity 10,000 < PE < 100,000, 48 kWh PE−1 y−1 for capacity 2,000 < PE < 10,000 and 76 kWh PE−1 y−1 for small plants < 2,000 PE.

The Power Reclamation of Utilizing Micro-Hydro Turbines in the Aeration Basins of Wastewater Treatment Plants

2020 ◽  
Vol 143 (8) ◽  
Author(s):  
Alaa Hasan ◽  
Abdel Rahman Salem ◽  
Ahmad Abdel Hadi ◽  
Mohammad Qandil ◽  
Ryoichi S. Amano ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Water Column ◽  
Energy Savings ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Electricity Consumption ◽  
Oxygen Transfer Efficiency ◽  
Annual Cost Saving ◽  
Hydro Turbines ◽  
Extracted Power

Abstract Upgrading the aeration basin technology can improve the oxygen transfer efficiency (OTE), while keeping the energy consumption at its minimum level. Therefore, this paper introduces a new idea of installing micro-propeller turbines in the aeration basin of a wastewater treatment plant (WWTP) to extract power from the high-velocity location in the water column. This extracted power can be used to operate a mixer at the top of the membrane to induce the mixing in that region, which will drive the less oxygenated wastewater into the water column. The rest of the extracted power will rotate microturbine rotors for electric power generation. By applying the proposed microturbines to the 13 audited facilities, it was demonstrated to achieve a gross annual energy-savings of 3,836.9 MWh, a gross annual cost-saving of $260,497, and total CO2 emissions that would be reduced by 2,714 metric tons/year. Generally, the addition of the proposed microturbines can save up to 15.7% of the annual plant electricity consumption (1.3–12.8% of the plant annual electricity bills).

scholarly journals Energy Benchmarking and Optimization of Wastewater Treatment Plants in Greece

2020 ◽  
Vol 2 (1) ◽  
pp. 36
Author(s):  
Popi Christoforidou ◽  
George Bariamis ◽  
Maria Iosifidou ◽  
Eri Nikolaidou ◽  
Petros Samaras
Keyword(s):  
Wastewater Treatment ◽  
Energy Consumption ◽  
Energy Savings ◽  
Wastewater Treatment Plants ◽  
Specific Energy Consumption ◽  
Water Environment ◽  
Organic Load ◽  
Technical Data ◽  
Environmentally Sustainable ◽  
Crucial Component

Wastewater treatment, as a crucial component of the urban water environment, consists of several energy-consumptive stages, therefore efficiency and energy savings measures are essential to maintain them as environmentally sustainable and economically viable. Operational and technical data from WWTPs in Greece have been collected as well as a sample from 61 facilities with key energy profile components. Energy consumption was assessed by specific key performance indicators (KPIs); specific energy consumption expressed per population equivalent (from 3 to 150 kWh/PE), per cubic meter treated (from 0.2 to 2.0 kWh/m3) and per unit of organic load removed (from 0.03 to 7.13 kWh/CODremoved).

Consider Energy-Saving Options for Wastewater Treatment Plants

Opflow ◽  
2018 ◽  
Vol 44 (9) ◽  
pp. 6-7 ◽  
Author(s):  
Todd F. Brewer ◽  
Patrick Shea ◽  
Robert C. Cheng
Keyword(s):  
Wastewater Treatment ◽  
Energy Saving ◽  
Wastewater Treatment Plants
Sign in / Sign up

Export Citation Format

Share Document