scholarly journals Transformer Less Self-Commutated PV Inverter

Author(s):  
Maithili P ◽  
Kanakaraj J

The power demand is increased day by day and generation of electrical energy from non-renewable sources are not able to meet the demand. An alternate energy sources are the only solution to meet the power demand. The power generation from solar energy with photovoltaic effect is plays a major role. This Solar PV system has low efficiency. The power semiconductor devices and converter circuit along with inductive / magnetic circuit. The Inverter circuit have an influence on photovoltaic power generation to improve the level of output voltage along with efficiency. In this paper a new transformer less DC-AC converter is proposed, and it has high efficiency, requires less cost when compares with conventional inverter with transformer. Transformer less self-commutated photovoltaic inverter is reflected the advantages of central and string inverters. It gives high output power and low-cost converter. These transformer less DC-AC converter is connect with Boost/Buck-Boost converter for the better output. So, this proposed DC-AC converter topology is not required mechanical switching and it is lighter in size. The PV technology has low efficiency and utilize more cost for generation of power. The proposed transformer less PV inverter is the better choice to increase the usefulness and reduce the charge rate of this PV system.

2018 ◽  
Vol 7 (2.12) ◽  
pp. 105
Author(s):  
Hee Chul Kim

Background/Objectives: Research and development of low-cost, high-efficiency devices that can be installed without replacing existing power generation equipment is promoted early. It is aimed to prevent the damage of property and human life by detecting the fire of PV system. Therefore, it is possible to easily install the device without replacing the solar module The aim is to minimize the damage to people.Methods/Statistical analysis: In order to prepare for the safety accidents of the photovoltaic power generation facilities due to fire and blast, the monitoring system should have the following functions as essential. Measures and analyzes the voltage and current of power generated in each string in the connection board in real time. An alarm is triggered when an abnormality of a specific string is detected or when an abnormal temperature change is detected in the connection panel internal temperature sensor.If the smoke sensor inside the connection panel detects smoke generation and an abnormality such as a fire is caught, the monitoring system immediately generates an alarm.Findings: It provides services such as checking the status of customer power plants, improving power generation efficiency, and recovering quickly in case of a disaster through a monitoring system that supports stable operation of the PV plant and profit generation. By using the existing connection box function as it is, the company minimized the additional cost, and promoted and promoted a low-cost, high-efficiency system.Improvements/Applications: H/W module using temperature and smoke sensor is interlocked with existing connection semi-control system to develop efficient connection monitoring device. In order to link the sensor value with the monitoring system, messages are added and supplemented. For the application of the fail-safe solution, we developed a monitoring device to prevent the escape of the solar module and developed the H / W module using the vibration and loosening sensor. We will develop the solar monitoring system based on cloud type IoT platform by linking the fault recognition and alarm generation function by adding / supplementing the sensor value to link with the monitoring system.As a power station management for cloud type (ASP) service, adoption of oneM2M standard based IoT platform can expand acceptance by monitoring web and mobile based monitoring as well as real time monitoring and fault monitoring of solar power plant.  


2021 ◽  
Vol 335 ◽  
pp. 03002
Author(s):  
Chong Jia Joon ◽  
Kelvin Chew Wai Jin

Solar photovoltaic (PV) panels have been widely used to convert the renewable energy from the sun to electrical energy to power electrical loads but suffers from relatively low efficiency between 15% to 22%. Typically, the panels have an average lifespan of 25 to 30 years but could degrade quicker due to the panel overheating. Beyond the optimum working temperature of 25°C, a drop of efficiency by 0.4 to 0.5% for every 1°C had been reported. For solar PV applications in urban regions, passive cooling is beneficial due to limited amount of space and lower energy consumption compared to active cooling. A solar PV system with augmented cooling was conducted at a balcony of a condominium from 10am until 2pm. The solar PV system consisted of an Arduino controller, solar panel module, temperature sensor and LCD monitor. Reusable cold and hot gel packs were attached to the bottom of the solar PV. Both setups of solar PV panel with and without the cooling system were placed at the balcony simultaneously for measurement of temperature, output voltage and current. From this research, the outcome of implementing a cooling system to the solar PV increases the efficiency of the energy conversion.


2019 ◽  
Author(s):  
Rishal Asri

Sunlight is energy that can be converted into electrical energy. One of the uses is by applying it to the roof ofthe building. The application in this building has restrictions such as the placement of the PV moduleshorizontally and vertically. In the study comparing the results of energy obtained from the PV system withhorizontal and vertical positions with a standard degree angle in the direction of azimuth sunlight. Positionusing the horizontal produces more energy and reaches a performance ratio of more than 80%.


Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1579
Author(s):  
Heng Zhang ◽  
Na Wang ◽  
Kai Liang ◽  
Yang Liu ◽  
Haiping Chen

A solar-aided power generation (SAPG) system effectively promotes the high efficiency and low cost utilization of solar energy. In this paper, the SAPG system is represented by conventional coal-fired units and an annular Fresnel solar concentrator (AFSC) system. The annular Fresnel solar concentrator system is adopted to generate solar steam to replace the extraction steam of the turbine. According to the steam–water matrix equation and improved Flugel formula, the variable conditions simulation and analysis of the thermo-economic index were proposed by Matlab. Furthermore, in order to obtain the range of small disturbance, the method of partial replacement is used, that is, the extraction steam of the turbine is replaced from 0 to 100% with a step size of 20%. In this work, a SAPG system is proposed and its thermo-economic index and small disturbance scope are analyzed. The results show that the SAPG system is energy-saving, and the application scope of small disturbance is related to the quantity of the extraction steam and evaluation index.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4675
Author(s):  
Ayat-allah Bouramdane ◽  
Alexis Tantet ◽  
Philippe Drobinski

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified.


Electronics ◽  
2018 ◽  
Vol 7 (7) ◽  
pp. 119 ◽  
Author(s):  
Muhammad Khan ◽  
Kamran Zeb ◽  
Waqar Uddin ◽  
P. Sathishkumar ◽  
Muhammad Ali ◽  
...  

Environment protection and energy saving are the most attractive trends in zero-carbon buildings. The most promising and environmentally friendly technique is building integrated photovoltaics (BIPV), which can also replace conventional buildings based on non-renewable energy. Despite the recent advances in technology, the cost of BIPV systems is still very high. Hence, reducing the cost is a major challenge. This paper examines and validates the effectiveness of low-cost aluminum (Al) foil as a reflector. The design and the performance of planer-reflector for BIPV systems are analyzed in detail. A Bi-reflector solar PV system (BRPVS) with thin film Al-foil reflector and an LLC converter for a BIPV system is proposed and experimented with a 400-W prototype. A cadmium–sulfide (CdS) photo-resistor sensor and an Arduino-based algorithm was developed to control the working of the reflectors. Furthermore, the effect of Al-foil reflectors on the temperature of PV module has been examined. The developed LLC converter confirmed stable output voltage despite large variation in input voltage proving its effectiveness for the proposed BRPVS. The experimental results of the proposed BRPVS with an Al-reflector of the same size as that of the solar PV module offered an enhancement of 28.47% in the output power.


2020 ◽  
Vol 13 (2) ◽  
pp. 579-591 ◽  
Author(s):  
Binbin Jiang ◽  
Xixi Liu ◽  
Qi Wang ◽  
Juan Cui ◽  
Baohai Jia ◽  
...  

A high conversion efficiency of 11.2% was realized in a low-cost PbS-based segmented thermoelectric module.


Author(s):  
Adeoye Samuel ◽  
◽  
Oladimeji TT ◽  

The goal of power sector in Nigeria is to efficiently and reliably transmit electrical power to all parts of the country which are made up of thirty-six states of the federation and the federal capital territory. The constituents of electrical power system are the generation, transmission, distribution and the utilization of electrical energy. There is gross power imbalance between the generation and the required power demand which has culminated into a defective economy in the last three decades. This paper therefore examines the power imbalance between the generation and power demand by the consumers and therefore stresses the need to harness the opportunity of renewable energy generation close to the gap between the power generation and power demand. This will help in transmitting and distributing efficient, effective, reliable power to consumers and improve both human and capital development. The availability of renewable energy sources such as sun, wind and small hydro power will be explored for the future of power generation in the country to fill in the gap between power generation and demand in Nigeria


Author(s):  
Yuwono Bimo Purnomo ◽  
F. Danang Wijaya ◽  
Eka Firmansyah

In a standalone photovoltaic (PV) system, a bidirectional DC converter (BDC) is needed to prevent the battery from damage caused by DC bus voltage variation. In this paper, BDC was applied in a standalone solar PV system to interface the battery with a DC bus in a standalone PV system. Therefore, its bidirectional power capability was focused on improving save battery operation while maintaining high power quality delivery. A non-isolated, buck and boost topology for the BDC configuration was used to interface the battery with the DC bus. PID controller-based control strategy was chosen for easy implementation, high reliability, and high dynamic performance. A simulation was conducted using MATLAB Simulink program. The simulation results show that the implementation of the BDC controller can maintain the DC bus voltage to 100 V, have high efficiency at 99.18% in boost mode and 99.48% in buck mode. To prevent the battery from overcharging condition, the BDC stops the charging process and then works as a voltage regulator to maintain the DC bus voltage at reference value.


2015 ◽  
Vol 730 ◽  
pp. 173-177
Author(s):  
Yu Wen Tang

Solar energy is an inexhaustible and renewable energy without environmental pollution. Solar energy can be used in three kinds of forms: solar thermal energy, photochemical conversion and photovoltaic power generation. Among these, the final form of photovoltaic power generation is electricity which can be transported, applied and stored conveniently. On the basis of photovoltaic effect, solar cell is developed as a new technology to convert light energy into electrical energy using semiconductor. Up to now the two key problems of the development of solar cells are how to improve the conversion efficiency and reduce cost. Therefore, the material and production technology used for solar cells are discussed based on improving conversion efficiency in this article.


Sign in / Sign up

Export Citation Format

Share Document