scholarly journals Proactive Fault Tolerant Routing Protocol for Mobile WSN

2019 ◽  
Vol 9 (1) ◽  
pp. 1892-1896
Keyword(s):  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Routing Protocol ◽  
Performance Metrics ◽  
Fault Tolerant ◽  
Base Station ◽  
Wireless Sensor ◽  
Optimal Routing ◽  
Routing Table ◽  
Start Node

In Wireless Sensor Network when the sensory nodes are mobile, it is called Mobile WSN. Since the sensors are on the move, the topology of a MWSN is perpetually dynamical. So, finding an optimal routing path from the start node (where the event takes place) to the base station in Mobile WSN is highly complicated. Recent research works have resulted in the design of many innovative protocols for MWSN, however there are many unresolved issues like fault tolerance, connectivity, reducing the energy consumption, enhancing coverage, improving security etc. This work aims at proposing a proactive FT routing scheme for Mobile WSN using a dynamic routing table PFTP and then simulating in MATLAB for evaluating the various performance metrics.

scholarly journals An Election Energy Threshold Based Multi-Hop Routing Protocol in a Grid-Clustered Wireless Sensor Network

2018 ◽  
pp. 327-336 ◽  
Author(s):  
Funom Samuel Dadah ◽  
Ajayi Ore-Ofe ◽  
Aliyu D Usman ◽  
Y A Mshelia ◽  
M O Babatunde
Keyword(s):  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Network ◽  
Routing Protocol ◽  
Energy Efficient ◽  
Routing Algorithm ◽  
Base Station ◽  
Energy Threshold ◽  
Wireless Sensor ◽  
Data Packets

Owing to the limited energy of sensor nodes (SNs) in a wireless sensor network (WSN), it is important to reduce and balance the energy consumption of the SNs in order to extend the WSN lifetime. Clustering mechanism is a highly efficient and effective mechanism for minimizing the amount of energy that SNs consume during the transmission of data packets. In this paper, an election energy threshold based multi-hop routing protocol (mEEMRP) is presented. In order to minimize energy consumption, this routing protocol uses grid clustering, where the network field is divided into grid clusters. SNs in each grid cluster select a cluster head (CH) based on a weight factor that takes the node location, node’s residual energy (RE) as well as the node’s distance from the base station into consideration. An energy efficient multi-hop routing algorithm is adopted during the transmission of data packets from the cluster heads (CHs) to the base station (BS). This multi-hop routing algorithm uses an election energy threshold value, T­nhCH that takes into consideration the RE of CHs as well as the distance between CHs. Simulation results show a 1.77% and 10.65% improvement in terms of network lifetime for two network field scenarios over Energy Efficient Multi-hop Routing Protocol (EEMRP).

PERFORMANCE EVALUATION ANALYSIS OF WIRELESS SENSOR NETWORKS ROUTING PROTOCOLS IN SMART GRIDS

2016 ◽  
Vol 26 (1) ◽  
pp. 17
Author(s):  
Carlos Deyvinson Reges Bessa
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Smart Grids ◽  
Network Routing ◽  
Base Station ◽  
Wireless Sensor ◽  
Delay Jitter ◽  
La Red

ABSTRACTThis work aims to study which wireless sensor network routing protocol is more suitable for Smart Grids applications, through simulation of AODV protocols, AOMDV, DSDV and HTR in the NS2 simulation environment. Was simulated a network based on a residential area with 47 residences, with one node for each residence and one base station, located about 25m from the other nodes. Many parameters, such as packet loss, throughput, delay, jitter and energy consumption were tested.  The network was increased to 78 and 93 nodes in order to evaluate the behavior of the protocols in larger networks. The tests proved that the HTR is the routing protocol that has the best results in performance and second best in energy consumption. The DSDV had the worst performance according to the tests.Key words.- Smart grid, QoS analysis, Wireless sensor networks, Routing protocols.RESUMENEste trabajo tiene como objetivo estudiar el protocolo de enrutamiento de la red de sensores inalámbricos es más adecuado para aplicaciones de redes inteligentes, a través de la simulación de protocolos AODV, AOMDV, DSDV y HTR en el entorno de simulación NS2. Se simuló una red basada en una zona residencial con 47 residencias, con un nodo para cada residencia y una estación base, situada a unos 25 metros de los otros nodos. Muchos parámetros, tales como la pérdida de paquetes, rendimiento, retardo, jitter y el consumo de energía se probaron. La red se incrementó a 78 y 93 nodos con el fin de evaluar el comportamiento de los protocolos de redes más grandes. Las pruebas demostraron que el HTR es el protocolo de enrutamiento que tiene los mejores resultados en el rendimiento y el segundo mejor en el consumo de energía. El DSDV tuvo el peor desempeño de acuerdo a las pruebas.Palabras clave.- redes inteligentes, análisis de calidad de servicio, redes de sensores inalámbricas, protocolos de enrutamiento.

scholarly journals An Enhanced Heterogeneous Gateway-Based Energy-Aware Multi-hop Routing Protocol for Wireless Sensor Networks

2022 ◽  
Author(s):  
Fuseini Jibreel ◽  
Emmanuel Tuyishimire ◽  
I M Daabo
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Data Transmission ◽  
Base Station ◽  
Communication Strategy ◽  
Wireless Sensor ◽  
Energy Aware ◽  
Routing Scheme

Wireless Sensor Networks (WSNs) continue to provide essential services for various applications such as surveillance, data gathering, and data transmission from the hazardous environments to safer destinations. This has been enhanced by the energy-efficient routing protocols that are mostly designed for such purposes. Gateway-based Energy-Aware Multi-hop Routing protocol (MGEAR) is one of the homogenous routing schemes that was recently designed to more efficiently reduce the energy consumption of distant nodes. However, it has been found that the protocol has a high energy consumption rate, lower stability period, less data transmission to the Base station (BS). In this paper, an enhanced Heterogeneous Gateway-based Energy-Aware multi-hop routing protocol ( HMGEAR) is proposed. The proposed routing scheme is based on the introduction of heterogeneous nodes in the existing scheme, selection of the head based on the residual energy, introduction of multi-hop communication strategy in all the regions of the network, and implementation of energy hole elimination technique. Results show that the proposed routing scheme outperforms two existing ones.

Power Layer Energy Efficient Routing Protocol in Wireless Sensor Network (PLRP)

2013 ◽  
Vol 5 (1) ◽  
pp. 57-68 ◽  
Author(s):  
Sardjoeni Moedjiono ◽  
Aries Kusdaryono
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Energy Efficient ◽  
Sensor Node ◽  
Base Station ◽  
Wireless Sensor ◽  
Energy Usage ◽  
Energy Efficient Routing

Preserving energy of sensor node in wireless sensor network is an effort to prolong the lifetime of network. Energy of sensor node is very crucial because battery powered and irreplaceable. Energy conservation of sensor node is an effort to reduce energy consumption in order to preserve resource for network lifetime. It can be achieved through efficient energy usage by reducing consumption of energy or decrease energy usage while achieving a similar outcome. In this paper, the authors propose power layer energy efficient routing protocol in wireless sensor network, named PLRP, which use power control and multi-hop routing protocol to control overhead of sensor node and create clustering to distribute energy dissipation and increase energy efficiency of all sensor node. The main idea of PLRP is the use of power control, which divide sensor node into group by base station uses layer of energy and maximize the computation energy in base station to reduce computational energy in sensor node for conservation of network lifetime. The performance of PLRP compared to BCDCP and BIDRP based of hierarchical routing protocol. The simulation results show that PLRP achieve 25% and 30% of improvement on network lifetime.

scholarly journals A PSO-Based Uneven Dynamic Clustering Multi-Hop Routing Protocol for Wireless Sensor Networks

Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1835 ◽  
Author(s):  
Ruan ◽  
Huang
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Cluster Head ◽  
Base Station ◽  
Wireless Sensor ◽  
Dynamic Clustering ◽  
Energy Efficient Routing

Since wireless sensor networks (WSNs) are powered by energy-constrained batteries, many energy-efficient routing protocols have been proposed to extend the network lifetime. However, most of the protocols do not well balance the energy consumption of the WSNs. The hotspot problem caused by unbalanced energy consumption in the WSNs reduces the network lifetime. To solve the problem, this paper proposes a PSO (Particle Swarm Optimization)-based uneven dynamic clustering multi-hop routing protocol (PUDCRP). In the PUDCRP protocol, the distribution of the clusters will change dynamically when some nodes fail. The PSO algorithm is used to determine the area where the candidate CH (cluster head) nodes are located. The adaptive clustering method based on node distribution makes the cluster distribution more reasonable, which balances the energy consumption of the network more effectively. In order to improve the energy efficiency of multi-hop transmission between the BS (Base Station) and CH nodes, we also propose a connecting line aided route construction method to determine the most appropriate next hop. Compared with UCCGRA, multi-hop EEBCDA, EEMRP, CAMP, PSO-ECHS and PSO-SD, PUDCRP prolongs the network lifetime by between 7.36% and 74.21%. The protocol significantly balances the energy consumption of the network and has better scalability for various sizes of network.

Performance Analysis of Multi-Hop Routing Protocol With Optimized Grid-Based Clustering for Wireless Sensor Network

2020 ◽  
pp. 254-282
Author(s):  
Saloni Dhiman ◽  
Deepti Kakkar ◽  
Gurjot Kaur
Keyword(s):  
Wireless Sensor Networks ◽  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Performance Analysis ◽  
Sensor Network ◽  
Routing Protocol ◽  
Base Station ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Grid Based

Wireless sensor networks (WSNs) consist of several sensor nodes (SNs) that are powered by battery, so their lifetime is limited, which ultimately affects the lifespan and hence performance of the overall networks. Till now many techniques have been developed to solve this problem of WSN. Clustering is among the effective technique used for increasing the network lifespan. In this chapter, analysis of multi-hop routing protocol based on grid clustering with different selection criteria is presented. For analysis, the network is divided into equal-sized grids where each grid corresponds to a cluster and is assigned with a grid head (GH) responsible for collecting data from each SN belonging to respective grid and transferring it to the base station (BS) using multi-hop routing. The performance of the network has been analyzed for different position of BS, different number of grids, and different number of SNs.

scholarly journals An improved cluster formation process in wireless sensor network to decrease energy consumption

2020 ◽  
Author(s):  
Hamid Reza Farahzadi ◽  
Mostafa Langarizadeh ◽  
Mohammad Mirhosseini ◽  
Seyed Ali Fatemi Aghda
Keyword(s):  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Network ◽  
Information Transfer ◽  
Cluster Head ◽  
High Energy ◽  
Residual Energy ◽  
Base Station ◽  
Wireless Sensor ◽  
Death Time

AbstractWireless sensor network has special features and many applications, which have attracted attention of many scientists. High energy consumption of these networks, as a drawback, can be reduced by a hierarchical routing algorithm. The proposed algorithm is based on the Low Energy Adaptive Clustering Hierarchy (LEACH) and Quadrant Cluster based LEACH (Q-LEACH) protocols. To reduce energy consumption and provide a more appropriate coverage, the network was divided into several regions and clusters were formed within each region. In selecting the cluster head (CH) in each round, the amount of residual energy and the distance from the center of each node were calculated by the base station (including the location and residual energy of each node) for all living nodes in each region. In this regard, the node with the largest value had the highest priority to be selected as the CH in each network region. The base station calculates the CH due to the lack of energy constraints and is also responsible for informing it throughout the network, which reduces the load consumption and tasks of nodes in the network. The information transfer steps in this protocol are similar to the LEACH protocol stages. To better evaluate the results, the proposed method was implemented with LEACH LEACH-SWDN, and Q-LEACH protocols using MATLAB software. The results showed better performance of the proposed method in network lifetime, first node death time, and the last node death time.

scholarly journals Trust-Aware and Low Energy Consumption Security Topology Protocol of Wireless Sensor Network

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Zuo Chen ◽  
Min He ◽  
Wei Liang ◽  
Kai Chen
Keyword(s):  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Network ◽  
Cluster Head ◽  
Residual Energy ◽  
Base Station ◽  
Low Energy ◽  
Wireless Sensor ◽  
Trust Value ◽  
Low Energy Consumption

Wireless sensor network (WSN) is a kind of distributed and self-organizing networks, in which the sensor nodes have limited communication bandwidth, memory, and limited energy. The topology construction of this network is usually vulnerable when attacked by malicious nodes. Besides, excessive energy consumption is a problem that can not be ignored. Therefore, this paper proposes a secure topology protocol of WSN which is trust-aware and of low energy consumption, called TLES. The TLES considers the trust value as an important factor affecting the behavior of node. In detail, the TLES would take trust value, residual energy of the nodes, and node density into consideration when selecting cluster head nodes. Then, TLES constructs these cluster head nodes by choosing the next hop node according to distance to base station (BS), nodes’ degrees, and residual energy, so as to establish a safe, reliable, and energy saving network. Experimental results show that the algorithm can effectively isolate the malicious node in the network and reduce the consumption of energy of the whole network.

Sign in / Sign up

Export Citation Format

Share Document