scholarly journals Optimization of Machining Parameters on 7075 Aluminum Alloy using Taguchi and ANOVA for Surface Roughness

2020 ◽  
Vol 8 (5) ◽  
pp. 90-95
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Electrical Discharge Machining ◽  
Optimization Technique ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Anova Analysis ◽  
Tool Wear Rate ◽  
Made In

Optimization of the parameter to provide best solution to reduce the tool wear , surface roughness, cutting forces presented using optimization technique .In present work an experimental study is made. In this Taguchi design of experiment methodology for optimization of parameters on 7075Aluminium alloy using tungsten coated electrode . Experiments were conducted based on L27 standard orthogonal array with three processes parameters are cutting speed, feed, depth of cut . Electrical discharge machining is generally calculated on the basis of Surface Roughness (SR),Tool wear rate (TWR) and cutting force (CF) .The ANOVA(Analysis Of Variance) is used to study the performance characteristics in turning operation . ANOVA placed an important role for producing higher roughness . Finally the software ,MINITAB 17 was used and results obtained

scholarly journals Machinability, Modelling and Statistical Analysis of In-Situ Al–Si–TiB2 Composites

2019 ◽  
Vol 3 (1) ◽  
pp. 28 ◽  
Author(s):  
Jimmy Karloopia ◽  
Shaik Mozammil ◽  
Pradeep Jha
Keyword(s):  
Surface Roughness ◽  
Statistical Analysis ◽  
Tool Wear ◽  
Cutting Forces ◽  
Elevated Temperatures ◽  
Optimization Technique ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Conventional Machining

Aluminum and its alloys have numerous applications in manufacturing, aerospace, and automotive industries. At elevated temperatures, they start to fail in fulfilling their roles and functions. Aluminum-based metal matrix composites (MMCs) are good alternatives for metal and alloys due to their excellent properties. However, the conventional machining of several composites shows complications for a number of reasons, such as high tool wear, poor surface roughness, high machining cost, cutting forces, etc. Numerous studies have already been conducted on the machinability of various MMCs, but the machinability of Al–Si–TiB2 composite is still not well studied. It is of utmost importance that several process parameters of conventional machining are precisely controlled as well as optimized. In this study an effort was made to optimize input parameters such as cutting speed, depth of cut, and feed to obtain well-finished final components with the minimum cutting force and tool wear. These progressions are involved with multiple response characteristics, therefore the exploration of an appropriate multi-objective optimization technique was indeed essential. The performance characteristics of cutting forces and surface roughness were considered for optimization of the machining parameters. Analysis of variance (ANOVA) was employed for the optimization and statistical analysis.

Multiobjective Optimization of End Milling HCHCr Using AlCrN PVD Coated Cutters With MOGA and RSMO

2014 ◽  
Author(s):  
Shantisagar K. Biradar ◽  
Geeta S. Lathkar
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Multiobjective Optimization ◽  
End Milling ◽  
Dominant Role ◽  
Optimization Technique ◽  
Cutting Speed ◽  
Optimization Techniques ◽  
Depth Of Cut ◽  
Machining Parameters

Here the End milling is studied for optimization of responses such as surface roughness and tool wear while machining HCHCr. These two conflicting responses decide the quality of process; therefore the multiobjective optimization technique is used. The Response Surface Optimizer (RSMO) and Multiobjective Genetic Algorithm (MOGA) were used as the multiobjective optimization techniques. The PVD coating of 2.5 micron AlCrN was used on four flute HSS End milling cutter. Input machining parameters were cutting speed, feed rate, depth of cut and percentage concentration of the solid lubricant MoS2 mixed with SAE-20 base oil. The experimentation was carried out using two level full factorial design concept while ANOVA technique has been used to verify the adequacy of mathematical model. It was found that the cutting speed (V) is having most dominant role on surface roughness and tool wear. The sensitivity analysis was carried out for studying sensitivity of input parameters for the responses.

Machining characteristics of Inconel 718 under several cutting conditions based on Taguchi method

2012 ◽  
Vol 227 (9) ◽  
pp. 1889-1897 ◽  
Author(s):  
R Thirumalai ◽  
JS Senthilkumaar ◽  
P Selvarani ◽  
S Ramesh
Keyword(s):  
Surface Roughness ◽  
Inconel 718 ◽  
Flank Wear ◽  
Optimization Technique ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Cutting Condition ◽  
Machining Parameters ◽  
Dry Machining ◽  
Noise Factors

Extensive researchers have conducted several experiments in the past for selecting the optimum parameters in machining nickel based alloy – Inconel 718. These experiments conducted so far are dealt with dry machining and flooded coolant machining of nickel alloy Inconel 718. In this research study, the usage of refrigerated coolant is also dealt with and it is compared with dry machining and flooded coolant machining. Cutting speed, feed and depth of cut are considered as the machining parameters. The effectiveness of the refrigerated coolant in machining the heat resistant super alloy material Inconel 718 with respect to these machining parameters are described in this article. The machinability studies parameters were generated with surface roughness and flank wear. The performance of uncoated carbide cutting tool was investigated at various cutting condition under dry, flooded coolant and refrigerated coolant machining. The relationship between the machining parameters and the performance measures were established and using analysis of variance significant machining parameters determined. This article made an attempt to Taguchi optimization technique to study the machinability performances of Inconel 718. Taguchi approach is an efficient and effective experimental method in which a response variable can be optimized, given various control and noise factors, using fewer experiments than a factorial design. Taguchi’s optimization analysis indicates that the factors level, its significance to influence the surface roughness and flank wear for the machining processes. Confirmation tests were conducted at an optimal condition to make a comparison between the experimental results foreseen from the mentioned correlations.

scholarly journals Statistical analysis of energy consumption, tool wear and surface roughness in machining of Titanium alloy (Ti-6Al-4V) under dry, wet and cryogenic conditions

2019 ◽  
Vol 10 (2) ◽  
pp. 561-573 ◽  
Author(s):  
Muhammad Ali Khan ◽  
Syed Husain Imran Jaffery ◽  
Mushtaq Khan ◽  
Muhammad Younas ◽  
Shahid Ikramullah Butt ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Effective Means ◽  
Sustainable Manufacturing ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Specific Cutting Energy ◽  
Cutting Energy ◽  
Positive Effect

Abstract. Productivity and economy are key elements of any sustainable manufacturing system. While productivity is associated to quantity and quality, economy focuses on energy efficient processes achieving an overall high output to input ratio. Machining of hard-to-cut materials has always posed a challenge due to increased tool wear and energy loss. Cryogenics have emerged as an effective means to improve sustainability in the recent past. In the present research the use of cooling conditions has been investigated as an input variable to analyze its effect on tool wear, specific cutting energy and surface roughness in combination with other input machining parameters of feed rate, cutting speed and depth of cut. Experimental design was based on Taguchi design of experiment. Analysis of Variance (ANOVA) was carried out to ascertain the contribution ratio of each input. Results showed the positive effect of coolant usage, particularly cryogenic, on process responses. Tool wear was improved by 33 % whereas specific cutting energy and surface roughness were improved by 10 % and 9 % respectively by adapting the optimum machining conditions.

The Effect of Cutting Speed and Feed Rate on Surface Roughness and Tool Wear when Machining Machining D2 Steel

2017 ◽  
Vol 909 ◽  
pp. 80-85 ◽  
Author(s):  
Mohd Rasidi Ibrahim ◽  
Tharmaraj Sreedharan ◽  
Nurul Aisyah Fadhlul Hadi ◽  
Mohammad Sukri Mustapa ◽  
Al Emran Ismail ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Surface Quality ◽  
Feed Rate ◽  
Input Parameter ◽  
Cutting Temperature ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
D2 Steel

Machining parameters is a main aspect in performing turning operations using lathe machines. Cutting parameters such as cutting speed, feed rate and depth of cut gives big influence on the dynamic behavior of the machining system. In machining parts, surface quality and tool wear are the most crucial customer requirements. This is because the major indication of surface quality on machined part is the surface roughness and the value of tool wear. Hence, to improve the surface roughness and minimize the forming of tool wear, the optimum feed rate and cutting speed will be determined. The input parameter such as cutting speed, feed rate and depth of cut always influence the tool wear, surface roughness, cutting force, cutting temperature, tool life and dimensional accuracy. The D2 steel was being investigated from the perspective of the effect of cutting speed and feed rate on its surface roughness and tool wear. The results show that cutting speed is the main parameter which affects the surface roughness where the most optimum parameter would be at cutting speed of 173, 231 and 288 m/min with feed rate of 0.15 mm/rev. The tool wear strongly affected by feed rate where at 0.15 mm/rev the tool wear value is the lowest. The combination of high cutting speed and low feed rate was the best parameter to achieve smooth surface roughness.

Optimization the Machining Parameters of Electro Chemical Discharge Machining of NiTi Shape Memory Alloys

2021 ◽  
Vol 1039 ◽  
pp. 117-126
Author(s):  
Shahad Ali Hammood ◽  
Haydar Abdul Hassan Al-Ethari ◽  
Abdolreza Rahimi
Keyword(s):  
Surface Roughness ◽  
Wear Rate ◽  
Tool Wear ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Solution Concentration ◽  
Machining Parameters ◽  
Tool Wear Rate ◽  
Conventional Methods ◽  
Taguchi’S Design Of Experiments

The electrochemical discharge machining (ECDM) is a combination effect of electrochemical machining in which metal is removed through the electrochemical process and electrical discharge machining in which metal is removed by rapid current discharges between two electrodes which are separated by a dielectric liquid and subject to an electric voltage. Difficulty of machining nickel titanium alloys by conventional methods such as; the significant tool wear, the need of highly experienced operators, and an excessive degradation in the material performance due to the high thermal and mechanical effects of these methods. For these, reasons non-conventional methods such as electrical discharge machining and electro chemical machining are often used to fabricate NiTi alloys with better machining results. The experiments were conducted with various conditions of voltage (50,60,70 and 80)V, dielectric solution concentration (30 and 40% of NaOH) and nanoparticles silver, and copper content (0.5% Cu, 0.5% Ag, 0.5% Cu and Ag) in the (55% Ni-45%Ti) alloy samples. The machining experiments were designed according to Taguchi's design of experiments (L32). Grey relational analysis was used to optimize the responses of the ECDM process. Material removal rate (MRR), tool wear rate (TWR), and surface roughness (Ra) represent the response parameters for machining of the alloy samples prepared by the powder metallurgy route. To achieve the objectives of this research work MiniTab17 software was employed. The optimal conditions were: voltage of 50V, solution concentration of 40% and the sample (NiTi+0.5%Cu+0.5%Ag) have the highest effect on machining characteristics with MRR value of 0.04991mg/sec., tool wear rate value of 0.00125mg/sec., and surface roughness of 0.0117μm.

Multiresponse Optimization of Al Alloy-SiC Composite Machining Parameters for Minimum Tool Wear and Maximum Metal Removal Rate

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
Rajesh Kumar Bhushan
Keyword(s):  
Tool Wear ◽  
Metal Removal ◽  
Removal Rate ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Al Alloy ◽  
Machining Parameters ◽  
Metal Removal Rate ◽  
Nose Radius ◽  
Multiresponse Optimization

Optimization in turning means determination of the optimal set of the machining parameters to satisfy the objectives within the operational constraints. These objectives may be the minimum tool wear, the maximum metal removal rate (MRR), or any weighted combination of both. The main machining parameters which are considered as variables of the optimization are the cutting speed, feed rate, depth of cut, and nose radius. The optimum set of these four input parameters is determined for a particular job-tool combination of 7075Al alloy-15 wt. % SiC (20–40 μm) composite and tungsten carbide tool during a single-pass turning which minimizes the tool wear and maximizes the metal removal rate. The regression models, developed for the minimum tool wear and the maximum MRR were used for finding the multiresponse optimization solutions. To obtain a trade-off between the tool wear and MRR the, a method for simultaneous optimization of the multiple responses based on an overall desirability function was used. The research deals with the optimization of multiple surface roughness parameters along with MRR in search of an optimal parametric combination (favorable process environment) capable of producing desired surface quality of the turned product in a relatively lesser time (enhancement in productivity). The multi-objective optimization resulted in a cutting speed of 210 m/min, a feed of 0.16 mm/rev, a depth of cut of 0.42 mm, and a nose radius of 0.40 mm. These machining conditions are expected to respond with the minimum tool wear and maximum the MRR, which correspond to a satisfactory overall desirability.

scholarly journals Milling Inconel 718 Workpiece With Cryogenically Treated And Untreated Cutting Tools

2021 ◽  
Author(s):  
Hüseyin Gürbüz ◽  
Şehmus Baday
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Abrasive Wear ◽  
Inconel 718 ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Cutting Tool Wear ◽  
Feed Force

Abstract Although Inconel 718 is an important material for modern aircraft and aerospace, it is a kind material, which is known to have low machinability. Especially, while these types of materials are machined, high cutting temperatures, BUE on cutting tool, high cutting forces and work hardening occur. Therefore, in recent years, instead of producing new cutting tools that can withstand these difficult conditions, cryogenic process, which is a heat treatment method to increase the wear resistance and hardness of the cutting tool, has been applied. In this experimental study, feed force, surface roughness, vibration, cutting tool wear, hardness and abrasive wear values that occurred as a result of milling of Inconel 718 material by means of cryogenically treated and untreated cutting tools were investigated. Three different cutting speeds (35-45-55 m/min) and three different feed rates (0.02-0.03-0.04 mm/tooth) at constant depth of cut (0.2 mm) were used as cutting parameters in the experiments. As a result of the experiments, lower feed forces, surface roughness, vibration and cutting tool wear were obtained with cryogenically treated cutting tools. As the feed rate and cutting speed were increased, it was seen that surface roughness, vibration and feed force values increased. At the end of the experiments, it was established that there was a significant relation between vibration and surface roughness. However, there appeared an inverse proportion between abrasive wear and hardness values. While BUE did not occur during cryogenically treated cutting tools, it was observed that BUE occurred in cutting tools which were not cryogenically treated.

Characterisation, Performance and Optimisation of Nanocellulose Metalworking Fluid (MWF) for Green Machining Process

2021 ◽  
Vol 18 (4) ◽  
pp. 9188-9207
Author(s):  
Mahendran Samykano ◽  
J. Kananathan ◽  
K. Kadirgama ◽  
A. K. Amirruddin ◽  
D. Ramasamy ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Surface Roughness ◽  
Tool Wear ◽  
Feed Rate ◽  
Cutting Speed ◽  
Machining Process ◽  
Alumina Nanoparticles ◽  
Working Fluid ◽  
Depth Of Cut ◽  
Nanoparticle Concentration

The present research attempts to develop a hybrid coolant by mixing alumina nanoparticles with cellulose nanocrystal (CNC) into ethylene glycol-water (60:40) and investigate the viability of formulated hybrid nanocoolant (CNC-Al2O3-EG-Water) towards enhancing the machining behavior. The two-step method has been adapted to develop the hybrid nanocoolant at various volume concentrations (0.1, 0.5, and 0.9%). Results indicated a significant enhancement in thermal properties and tribological behaviour of the developed hybrid coolant. The thermal conductivity improved by 20-25% compared to the metal working fluid (MWF) with thermal conductivity of 0.55 W/m℃. Besides, a reduction in wear and friction coefficient was observed with the escalation in the nanoparticle concentration. The machining performance of the developed hybrid coolant was evaluated using Minimum Quantity Lubrication (MQL) in the turning of mild steel. A regression model was developed to assess the deviations in the tool flank wear and surface roughness in terms of feed, cutting speed, depth of the cut, and nanoparticle concentration using Response Surface Methodology (RSM). The mathematical modeling shows that cutting speed has the most significant impact on surface roughness and tool wear, followed by feed rate. The depth of cut does not affect surface roughness or tool wear. Surface roughness achieved 24% reduction, 39% enhancement in tool length of cut, and 33.33% improvement in tool life span. From this, the surface roughness was primarily affected by spindle cutting speed, feed rate, and then cutting depth while utilising either conventional water or composite nanofluid as a coolant. The developed hybrid coolant manifestly improved the machining behaviour.

scholarly journals Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1338
Author(s):  
Lakshmanan Selvam ◽  
Pradeep Kumar Murugesan ◽  
Dhananchezian Mani ◽  
Yuvaraj Natarajan
Keyword(s):  
Tool Wear ◽  
Cutting Force ◽  
Physical Vapor Deposition ◽  
Metal Cutting ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Machined Surface ◽  
Coated Carbide ◽  
Cryogenic Conditions

Over the past decade, the focus of the metal cutting industry has been on the improvement of tool life for achieving higher productivity and better finish. Researchers are attempting to reduce tool failure in several ways such as modified coating characteristics of a cutting tool, conventional coolant, cryogenic coolant, and cryogenic treated insert. In this study, a single layer coating was made on cutting carbide inserts with newly determined thickness. Coating thickness, presence of coating materials, and coated insert hardness were observed. This investigation also dealt with the effect of machining parameters on the cutting force, surface finish, and tool wear when turning Ti-6Al-4V alloy without coating and Physical Vapor Deposition (PVD)-AlCrN coated carbide cutting inserts under cryogenic conditions. The experimental results showed that AlCrN-based coated tools with cryogenic conditions developed reduced tool wear and surface roughness on the machined surface, and cutting force reductions were observed when a comparison was made with the uncoated carbide insert. The best optimal parameters of a cutting speed (Vc) of 215 m/min, feed rate (f) of 0.102 mm/rev, and depth of cut (doc) of 0.5 mm are recommended for turning titanium alloy using the multi-response TOPSIS technique.

Sign in / Sign up

Export Citation Format

Share Document