The Effects of Thermocapillarity on the Thin Film Flow of MHD UCM Fluid over an Unsteady Elastic Surface with Convective Boundary Conditions

2019 ◽  
Vol 6 (3) ◽  
Author(s):  
Hanumesh Vaidya ◽  
K.V. Prasad ◽  
K. Vajravelu ◽  
Chiu-On Ng ◽  
S. Nadeem ◽  
...  
Keyword(s):  
Skin Friction ◽  
Velocity Slip ◽  
Convective Boundary Condition ◽  
Skin Friction Coefficient ◽  
Thin Film Flow ◽  
Convective Boundary ◽  
Local Skin ◽  
Similarity Transformations ◽  
Keller Box Method ◽  
Ucm Fluid

The study of two-dimensional flow and heat transfer in a liquid film of MHD Upper Convective Maxwell (UCM) fluid over an unsteady elastic stretching sheet subject to velocity slip and convective boundary condition is presented. Thermocapillarity effects are considered. Using suitable similarity transformations, the momentum and thermal energy equations are converted to a set of coupled nonlinear ordinary differential equations. These equations are solved numerically using the Keller-Box method. The velocity and the temperature distributions are presented graphically for different values of the pertinent parameters. The effects of the unsteady parameter on the skin friction, the wall temperature gradient, and the film thickness are tabulated and analyzed. The thermocapillarity parameter has a decreasing effect on the temperature field and the local skin-friction coefficient.

Slip flow over a non-Newtonian fluid through a Darcy–Forchheimer medium: Numerical approach

2019 ◽  
Vol 33 (35) ◽  
pp. 1950448
Author(s):  
K. Ganesh Kumar ◽  
M. N. Khan ◽  
M. Osman ◽  
Abdulaziz R. Alharbi ◽  
Mohammad Rahimi-Gorji ◽  
...  
Keyword(s):  
Differential Equations ◽  
Nonlinear Partial Differential Equations ◽  
Slip Flow ◽  
Convective Boundary Condition ◽  
Numerical Approach ◽  
Skin Friction Coefficient ◽  
Convective Boundary ◽  
Nusselt Numbers ◽  
Similarity Transformations ◽  
Liquid Suspension

This work focused on slip flow over a non-Newtonian nanofluid fluid flow past a stretching sheet with particles–liquid suspension. The convective boundary condition is taken into account. Similarity transformations are utilized to reduce the nonlinear partial differential equations into a set of nonlinear ordinary differential equations. Runge–Kutta–Fehlberg scheme is used to get the numerical solution. Important parameters are analyzed through graphs and skin friction coefficient. Nusselt numbers are presented in tables. Investigation reveals that slip parameter decreases the velocity field and Biot number increases the temperature field.

Entropy generation analysis in flow of thixotropic nanofluid

2019 ◽  
Vol 29 (12) ◽  
pp. 4507-4530 ◽  
Author(s):  
Muhammad Ijaz Khan ◽  
Salman Ahmad ◽  
Tasawar Hayat ◽  
M. Waleed Ahmad Khan ◽  
Ahmed Alsaedi
Keyword(s):  
Friction Coefficient ◽  
Differential Equations ◽  
Skin Friction ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Convective Boundary Condition ◽  
Skin Friction Coefficient ◽  
Convective Boundary ◽  
Content Type ◽  
Flow Variables

Purpose The purpose of this paper is to address entropy generation in flow of thixotropic nonlinear radiative nanoliquid over a variable stretching surface with impacts of inclined magnetic field, Joule heating, viscous dissipation, heat source/sink and chemical reaction. Characteristics of nanofluid are described by Brownian motion and thermophoresis effect. At surface of the sheet zero mass flux and convective boundary condition are considered. Design/methodology/approach Considered flow problem is mathematically modeled and the governing system of partial differential equations is transformed into ordinary ones by using suitable transformation. The transformed ordinary differential equations system is figure out by homotopy algorithm. Outcomes of pertinent flow variables on entropy generation, skin friction, concentration, temperature, velocity, Bejan, Sherwood and Nusselts numbers are examined in graphs. Major outcomes are concluded in final section. Findings Velocity profile increased versus higher estimation of material and wall thickness parameter while it decays through larger Hartmann number. Furthermore, skin friction coefficient upsurges subject to higher values of Hartmann number and magnitude of skin friction coefficient decays via materials parameters. Thermal field is an increasing function of Hartmann number, radiation parameter, thermophoresis parameter and Eckert number. Originality/value The authors have discussed entropy generation in flow of thixotropic nanofluid over a variable thicked surface. No such consideration is yet published in the literature.

scholarly journals Radiative Magnetohydrodynamics Casson Nanofluid Flow and Heat and Mass Transfer past on Nonlinear Stretching Surface

2021 ◽  
Author(s):  
Gurrala Thirupathi ◽  
Kamatam Govardhan ◽  
Ganji Narender
Keyword(s):  
Differential Equations ◽  
Velocity Slip ◽  
Convective Boundary Condition ◽  
Skin Friction Coefficient ◽  
Physical Parameters ◽  
Stretching Surface ◽  
Nanofluid Flow ◽  
Convective Boundary ◽  
Casson Nanofluid ◽  
Order Four

The magnetohydrodynamics (MHD) stagnation point Casson nanofluid flow towards stretching surface with velocity slip and convective boundary condition has been investigated in this article. Effects of thermal radiation, viscous dissipation, heat source and chemical reaction have also been incorporated. Using appropriate similarity transformation Partial Differential Equations (PDEs) are converted into Ordinary Differential Equations (ODEs) and shooting technique along with Adams–Moulton method of order four has been used to obtain the numerical results. Different physical parameters effects on velocity, temperature and concentration of nanofluid flow have been presented graphically and discussed in detail. Numerical values of the skin friction coefficient, Nusselt number and Sherwood number are also and discussed.

scholarly journals Slip Flow of Kerosene Oil Based SWCNT Nanofluid over Stretching Sheet with Radiation and Suction/Injection Effects

2021 ◽  
Vol 6 (3) ◽  
pp. 860-877
Author(s):  
Susheela Chaudhary ◽  
Kiran Kunwar Chouhan ◽  
Santosh Chaudhary
Keyword(s):  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Slip Flow ◽  
Velocity Slip ◽  
Slip Boundary Condition ◽  
Skin Friction Coefficient ◽  
Single Wall Carbon Nanotubes ◽  
Local Skin ◽  
Slip Boundary ◽  
Similarity Transformations

Present study numerically investigates a two dimensional steady laminar boundary layer nanofluid flow of single-wall carbon nanotubes (SWCNTs) immersed into kerosene oil, due to a linearly stretched sheet. Flow is subjected to the slip boundary condition and suction/injection effects. Employing suitable similarity transformations, governing PDEs of the arising problem are converted into coupled nonlinear non-dimensional ordinary differential equations. A set of obtained ODEs with assisting boundary conditions is solved numerically by applying finite element method (FEM). Effect of pertinent factors, velocity slip parameter, suction/injection parameter and solid volume fraction parameter on non-dimensional velocity and temperature profiles are characterized graphically. In addition, physical emerging parameters, local Nusselt’s number and local skin friction coefficient are computed and presented via table. Furthermore, derived numerical values of shear stress and heat flux at the surface are compared with previously published results.

scholarly journals Effects of Nanolayer and Second Order Slip on Unsteady Nanofluid Flow Past a Wedge

Mathematics ◽  
2019 ◽  
Vol 7 (11) ◽  
pp. 1043 ◽  
Author(s):  
Zhu ◽  
Cao
Keyword(s):  
Friction Coefficient ◽  
Skin Friction ◽  
Velocity Slip ◽  
Skin Friction Coefficient ◽  
Second Order ◽  
Analysis Method ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Homotopy Analysis ◽  
Fundamental Equations

This paper presents the study of unsteady nanofluids flow and heat transfer past a wedge with second order velocity slip and temperature jump. The model is modified by considering the existence of a nanolayer together with the effects of thermophoresis and Brownian motion. The fundamental equations were transformed into ordinary differential equations by a new set of similarity transformations and solved by using the homotopy analysis method (HAM). We determined that the error reached 10-6 and the effectiveness of HAM was attained. The influence of second-order slip on the fluid skin-friction coefficient was analyzed and we determined that the Nusselt number decreases and skin friction coefficient rises with an increase in the thickness of the nanolayer.

Effect of Convective Boundary Condition on MHD Carreau Dusty Fluid over a Stretching Sheet with Heat Source

2017 ◽  
Vol 377 ◽  
pp. 233-241 ◽  
Author(s):  
S.U. Mamatha ◽  
Mahesha ◽  
Chakravarthula S.K. Raju ◽  
Oluwole Daniel Makinde
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Heat Source ◽  
Stretching Sheet ◽  
Convective Boundary Condition ◽  
Skin Friction Coefficient ◽  
Convective Boundary ◽  
Dusty Fluid ◽  
Similarity Transformations

The underlying intention of the present study is to analyze the steady incompressible magneto hydrodynamic Carreau Dusty fluid over a stretching sheet with exponentially decaying heat source. Convective conditions are considered to control the thermal boundary layer. Similarity transformations were used to convert partial differential equations (PDEs) to a system of nonlinear ordinary differential equations (NODEs) which are solved numerically by employing Runge-Kutta with Newton’s technique. The effect of pertinent parameters on velocity and temperature profiles of both fluid and dust phase within the boundary layer has been studied by considering various values of controlling parameters. In addition, skin friction coefficient and reduced heat transfer coefficient have been examined for various values of the governing parameters. It is observed that the rate of heat transfer depreciates with space dependent heat generation and enhanced with the existing convective condition.

Natural Convective Boundary Layer Flow of Nanofluids Above an Isothermal Horizontal Plate

2014 ◽  
Vol 136 (10) ◽  
Author(s):  
Kaustav Pradhan ◽  
Subho Samanta ◽  
Abhijit Guha
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Nanoparticle Volume Fraction ◽  
Convective Boundary ◽  
Local Skin ◽  
Local Skin Friction ◽  
Layer Flow

The natural convective boundary layer flow of a nanofluid over an isothermal horizontal plate is studied analytically. The model used for the nanofluid accounts for the effects of Brownian motion and thermophoresis. The analysis shows that the velocity, temperature, and nanoparticle volume fraction profiles in the respective boundary layers depend not only on the Prandtl number (Pr) and Lewis number (Le) but also on three additional dimensionless parameters: the Brownian motion parameter Nb, the buoyancy ratio parameter Nr and the thermophoresis parameter Nt. The velocity, temperature, and nanoparticle volume fraction profiles for the nanofluid are found to have a weak dependence on the values of Nb, Nr, and Nt. The effect of the above-mentioned parameters on the local skin-friction coefficient and Nusselt number has been studied extensively. It has been observed that as Nr increases, the local skin-friction coefficient decreases whereas local Nusselt number remains almost constant. As Nb or Nt increases, the local skin-friction coefficient increases whereas the local Nusselt number decreases.

A Note on the Similar and Non-Similar Solutions of Powell-Eyring Fluid Flow Model and Heat Transfer over a Horizontal Stretchable Surface

2020 ◽  
Vol 401 ◽  
pp. 25-35
Author(s):  
Razi Khan ◽  
M. Zaydan ◽  
Abderrahim Wakif ◽  
B. Ahmed ◽  
R.L. Monaledi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Skin Friction ◽  
Power Law ◽  
Nonlinear Partial Differential Equations ◽  
Skin Friction Coefficient ◽  
Point Of View ◽  
Local Skin ◽  
Similarity Transformations ◽  
Similar Solutions

Deliberation on the dynamics of non-Newtonian fluids, most especially Powell-Eyring fluid flow can be described as an open question. In this investigation, the flow and heat transfer characteristics are examined numerically by means of similarity analysis for a Powell-Eyring fluid moving over an isothermal stretched surface along the horizontal direction, whose velocity varies nonlinearly as a function of and follows a specified power-law degree formula. In order to solve the problem under consideration, the resulting system of coupled nonlinear partial differential equations with their corresponding boundary conditions is transformed into a correct similar form by utilizing appropriate similarity transformations, which are exceptionally acceptable for a particular form of the power-law stretching velocity, whose exponent is equal to . From the mathematical point of view, the similar equations of the studied flow cannot be obtained for any form of the power-law surface stretching velocity. As a result, it was found that the use of a general power-law stretching velocity results in non-similar equations. Also, appropriate numerical methods for similar and non-similar equations are used to discuss the results of engineering significance. Furthermore, correlation expressions for the skin friction and Nusselt number have been derived by applying the linear regression on the data outputted from the used computational methods.On the contrary to the heat transfer rate, it was found that the local skin friction coefficient is a decreasing property of power-law stretching.

Numerical Simulation of Slip Influence on the Flow of a MHD Williamson Fluid Over a Vertical Convective Surface

2018 ◽  
Vol 7 (4) ◽  
pp. 309-321 ◽  
Author(s):  
CH. Amanulla ◽  
N. Nagendra ◽  
M. Suryanarayana Reddy
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Skin Friction ◽  
Conductive Polymer ◽  
Skin Friction Coefficient ◽  
Polymer Materials ◽  
Radial Magnetic Field ◽  
Similarity Transformations ◽  
Keller Box Method

Abstract An analysis of this paper is examined, two-dimensional, laminar with heat transfer on natural convective flow in an electro-conductive polymer on the external surface of a vertical plate under radial magnetic field and slip effects is considered. The coupled governing partial differential equations are transformed to ordinary differential equations by using non-similarity transformations. The obtained ordinary differential equations are solved numerically by a well-known method named as Keller Box Method (KBM). The computed results for the velocity and temperature profiles as well as heat transfer and skin-friction coefficient have been depicted and discussed in detail through graphs for various parametric conditions. Increasing thermal slip strongly decreases skin friction and Nusselt number. Skin friction is also depressed with increasing magnetic body force parameter. Increasing momentum slip is observed to decrease skin friction. The model is relevant to the simulation of magnetic polymer materials processing.

scholarly journals Numerical study of bio-convection flow of magneto-cross nanofluid containing gyrotactic microorganisms with activation energy

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Qiu-Hong Shi ◽  
Aamir Hamid ◽  
M. Ijaz Khan ◽  
R. Naveen Kumar ◽  
R. J. Punith Gowda ◽  
...  
Keyword(s):  
Radiation Effects ◽  
Numerical Study ◽  
Source Parameters ◽  
Lewis Number ◽  
Convective Boundary Condition ◽  
Convection Flow ◽  
Convective Boundary ◽  
Similarity Transformations ◽  
Cross Nanoliquid ◽  
Source Sink

AbstractIn this study, a mathematical model is developed to scrutinize the transient magnetic flow of Cross nanoliquid past a stretching sheet with thermal radiation effects. Binary chemical reactions and heat source/sink effects along with convective boundary condition are also taken into the consideration. Appropriate similarity transformations are utilized to transform partial differential equations (PDE’s) into ordinary ones and then numerically tackled by shooting method. The impacts of different emerging parameters on the thermal, concentration, velocity, and micro-rotation profiles are incorporated and discussed in detail by means of graphs. Results reveal that, the escalation in magnetic parameter and Rayleigh number slowdowns the velocity and momentum of the fluid. The increase in Biot number, radiation and heat sink/source parameters upsurges the thermal boundary but, converse trend is seen for escalating Prandtl number. The density number of motile microorganisms acts as a growing function of bioconvection Lewis number and declining function of bioconvection Peclet number.

Sign in / Sign up

Export Citation Format

Share Document