scholarly journals DEA-based competition strategy in the presence of undesirable products: An application to paper mills

2021 ◽  
Vol 31 (2) ◽  
Author(s):  
Alireza Amirteimoori ◽  
Simin Masrouri
Keyword(s):  
Decision Making ◽  
Efficient Frontier ◽  
Data Envelopment ◽  
Undesirable Outputs ◽  
Competition Strategy ◽  
Paper Mills ◽  
Trade Off ◽  
Production Processes ◽  
Output Factors ◽  
Decision Making Units

In real applications of data envelopment analysis (DEA), there are cases in which undesirable outputs are produced along with desirable outputs in such a way that the total sum of the produced undesirable outputs over the production units must be fixed and constant. In this case, a trade-off between the decision making units (DMUs) is needed to balance the production of undesirable outputs. In a rational sight, this trade-off is done in such a way that all DMUs improve their relative performances. In this paper, a single DEA-based model is proposed to model fixed and variable-sum undesirable outputs in production processes. A common equilibrium efficient frontier is constructed and after reallocating the input/output factors, all decision making units (DMUs) prevail as efficient. A real case of 32 paper mills in China is given. The analysis results demonstrated that some economically developed paper mills have better performance than less developed paper mills; in particular, all efficient paper mills are the developed ones.

Relative Efficiency of Decision Making Units Producing Both Desirable and Undesirable Outputs: A Case of Textile Processing Units in Pakistan.

2011 ◽  
Vol 50 (4II) ◽  
pp. 685-698
Author(s):  
Samina Khalil
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Relative Efficiency ◽  
Value Added ◽  
Data Envelopment ◽  
Undesirable Outputs ◽  
Textile Processing ◽  
Decision Making Unit ◽  
Desirable And Undesirable Outputs ◽  
Decision Making Units

This paper aims at measuring the relative efficiency of the most polluting industry in terms of water pollution in Pakistan. The textile processing is country‘s leading sub sector in textile manufacturing with regard to value added production, export, employment, and foreign exchange earnings. The data envelopment analysis technique is employed to estimate the relative efficiency of decision making units that uses several inputs to produce desirable and undesirable outputs. The efficiency scores of all manufacturing units exhibit the environmental consciousness of few producers is which may be due to state regulations to control pollution but overall the situation is far from satisfactory. Effective measures and instruments are still needed to check the rising pollution levels in water resources discharged by textile processing industry of the country. JEL classification: L67, Q53 Keywords: Data Envelopment Analysis (DEA), Decision Making Unit (DMU), Relative Efficiency, Undesirable Output

A Common Set of Weights for Ranking Decision-Making Units with Undesirable Outputs: A Double Frontiers Data Envelopment Analysis Approach

2018 ◽  
Vol 35 (06) ◽  
pp. 1850039 ◽  
Author(s):  
Lei Chen ◽  
Fei-Mei Wu ◽  
Feng Feng ◽  
Fujun Lai ◽  
Ying-Ming Wang
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Optimal Solution ◽  
Data Envelopment ◽  
Undesirable Outputs ◽  
Discrimination Power ◽  
Efficiency Optimization ◽  
Common Set Of Weights ◽  
Desirable And Undesirable Outputs ◽  
Decision Making Units

Major drawbacks of the traditional data envelopment analysis (DEA) method include selecting optimal weights in a flexible manner, lacking adequate discrimination power for efficient decision-making units, and considering only desirable outputs. By introducing the concept of global efficiency optimization, this study proposed a double frontiers DEA approach with undesirable outputs to generate a common set of weights for evaluating all decision-making units from both the optimistic and pessimistic perspectives. For a unique optimal solution, compromise models for individual efficiency optimization were developed as a secondary goal. Finally, as an illustration, the models were applied to evaluate the energy efficiency of the Chinese regional economy. The results showed that the proposed approach could improve discrimination power and obtain a fair result in a case where both desirable and undesirable outputs exist.

Evaluation of Supplier Performance and Efficiency

2017 ◽  
pp. 184-216
Author(s):  
Chandra Sekhar Patro
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Relative Efficiency ◽  
Efficient Frontier ◽  
Business Environment ◽  
Vital Role ◽  
Data Envelopment ◽  
Supplier Performance ◽  
Decision Making Units

In the present competitive business environment, it is essential for the management of any organisation to take wise decisions regarding supplier evaluation. It plays a vital role in establishing an effective supply chain for any organisation. Most of the experts agreed that there is no one best way to evaluate the suppliers and different organizations use different approaches for evaluating supplier efficiency. The overall objective of any approach is to reduce purchase risk and maximize overall value to the purchaser. In this paper Data Envelopment Analysis (DEA) technique is developed to evaluate the supplier efficiency for an organisation. DEA is a multifactor productivity technique to measure the relative efficiency of the decision making units. The super efficiency method of DEA provides a way, which indicates the extent to which the efficient suppliers exceed the efficient frontier formed by other efficient suppliers. A case study is undertaken to evaluate the supplier performance and efficiency using DEA approach.

Slacks-Based Efficiency Measurements with Undesirable Outputs in Data Envelopment Analysis

2014 ◽  
Vol 16 (04) ◽  
pp. 1005-1021 ◽  
Author(s):  
Jie Wu ◽  
Xiang Lu ◽  
Dong Guo ◽  
Liang Liang
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Production Process ◽  
Environmental Performance ◽  
Decision Makers ◽  
European Countries ◽  
Data Envelopment ◽  
Undesirable Outputs ◽  
Theoretical Justification ◽  
Decision Making Units

Data envelopment analysis (DEA) has recently gained great popularity in modeling environmental performance because it provides condensed information to decision makers when the production process includes undesirable outputs. In this paper, we develop a new slacks-based efficiency measurement for modeling environmental performance using the environmental DEA technology. The proposed index has more theoretical justification, and distinguishes among different decision making units (DMUs) better in practice. Then we further extend it to the nonoriented index with double aim of increasing desirable outputs and reducing undesirable outputs. Finally, we calculate the index for each of 25 OECD European countries in a model of CO2 emission performance from 2007 to 2009 and the results obtained are presented.

scholarly journals An investigation of the undesirable outputs congestion in data envelopment analysis

2020 ◽  
Vol 33 (02) ◽  
pp. 468-475
Author(s):  
Soodabeh Nazari ◽  
Mohsen Rostamy-Malkhalifeh ◽  
Ali Hamzehee
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Decision Maker ◽  
The Other ◽  
Data Envelopment ◽  
Undesirable Outputs ◽  
Total Cost ◽  
Know How ◽  
Total Profit ◽  
Decision Making Units

Congestion is one of the most important subjects in Data Envelopment Analysis (DEA) which helps the Decision Maker (DM) to decide about changing the size of units. The estimation of congestion has attractive advantages from different perspectives. For example, the total cost of a partiular DMU, in which the congestion occurs, can be reduced by the decreases in inputs. On the other hand, the output of units can be increased by the recognizing and eliminating the congestion of DMUs and so, the total profit of decision making units can be increased. Hence, the management is eager to know how to recognize and eliminate the congestion of units. Most of the existing methods to estimation of the congestion in the literature consider only the desirable outputs. This study focuses on the evaluation of congestion in the presence of undesirable outputs and proposes an approach to recognize the congestion of units. The method is demonstrated on a numerical example to illustrate the validity of the proposed method.

Performance measurement of decision making units through interval efficiency with slacks-based measure: an application to tourist hotels in Taipei

2021 ◽  
pp. 1-12
Author(s):  
Qingxian An ◽  
Ruiyi Zhang ◽  
Yongchang Shen
Keyword(s):  
Decision Making ◽  
Consistency Condition ◽  
Efficient Frontier ◽  
Pairwise Comparison ◽  
Data Envelopment ◽  
Uncertainty Interval ◽  
The Matrix ◽  
Multiplicative Preference Relations ◽  
Interval Efficiency ◽  
Decision Making Units

Data envelopment analysis (DEA) is widely used to evaluate the performance of a group of homogeneous decision making units (DMUs). Considering the uncertainty, interval DEA has been introduced to fit into more situations. In this paper, an interval efficiency method based on slacks-based measure is proposed to solve the uncertain problems in DEA. Firstly, the maximum and minimum efficiency values of the evaluated DMU are calculated by the furthest and closest distance from the evaluated DMU to the projection points on the Pareto-efficient frontier, respectively. Then, the AHP method is used for the full ranking of DMUs. The paper uses the pairwise comparison relationship between each pair of DMUs to construct the interval multiplicative preference relations (IMPRs) matrix. If the matrix does not meet the consistency condition, a method to obtain consistency IMPRs is introduced. According to the consistency judgment matrix, the full ranking of DMUs can be obtained. Finally, we apply our method to the performance evaluation of 12 tourist hotels in Taipei in 2019.

scholarly journals Measuring the Productivity of Energy Consumption of Major Industries in China: A DEA-Based Method

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Xishuang Han ◽  
Xiaolong Xue ◽  
Jiaoju Ge ◽  
Hengqin Wu ◽  
Chang Su
Keyword(s):  
Decision Making ◽  
Energy Consumption ◽  
Data Envelopment Analysis ◽  
Malmquist Productivity Index ◽  
Productivity Index ◽  
Productivity Change ◽  
Data Envelopment ◽  
Policy Makers ◽  
Time Periods ◽  
Decision Making Units

Data envelopment analysis can be applied to measure the productivity of multiple input and output decision-making units. In addition, the data envelopment analysis-based Malmquist productivity index can be used as a tool for measuring the productivity change during different time periods. In this paper, we use an input-oriented model to measure the energy consumption productivity change from 1999 to 2008 of fourteen industry sectors in China as decision-making units. The results show that there are only four sectors that experienced effective energy consumption throughout the whole reference period. It also shows that these sectors always lie on the efficiency frontier of energy consumption as benchmarks. The other ten sectors experienced inefficiency in some two-year time periods and the productivity changes were not steady. The data envelopment analysis-based Malmquist productivity index provides a good way to measure the energy consumption and can give China's policy makers the information to promote their strategy of sustainable development.

Forecast of the efficiency confidence interval of decision-making units in data envelopment analysis

2020 ◽  
Vol 33 (02) ◽  
pp. 431-445
Author(s):  
Azarnoosh Kafi ◽  
Behrouz Daneshian ◽  
Mohsen Rostamy-Malkhalifeh ◽  
Mohsen Rostamy-Malkhalifeh
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Confidence Interval ◽  
Data Envelopment ◽  
Data Set ◽  
Interval Model ◽  
Time Period ◽  
Proposed Model ◽  
The Future ◽  
Decision Making Units

Data Envelopment Analysis (DEA) is a well-known method for calculating the efficiency of Decision-Making Units (DMUs) based on their inputs and outputs. When the data is known and in the form of an interval in a given time period, this method can calculate the efficiency interval. Unfortunately, DEA is not capable of forecasting and estimating the efficiency confidence interval of the units in the future. This article, proposes a efficiency forecasting algorithm along with 95% confidence interval to generate interval data set for the next time period. What’s more, the manager’s opinion inserts and plays its role in the proposed forecasting model. Equipped with forecasted data set and with respect to data set from previous periods, the efficiency for the future period can be forecasted. This is done by proposing a proposed model and solving it by the confidence interval method. The proposed method is then implemented on the data of an automotive industry and, it is compared with the Monte Carlo simulation methods and the interval model. Using the results, it is shown that the proposed method works better to forecast the efficiency confidence interval. Finally, the efficiency and confidence interval of 95% is calculated for the upcoming period using the proposed model.

Sign in / Sign up

Export Citation Format

Share Document