scholarly journals On the question of the use of GTZA with direct transmission on linear nuclear icebreakers

2021 ◽  
pp. 96-103
Author(s):  
В.А. Гулый ◽  
И.С. Сербин
Keyword(s):  
Power Plants ◽  
Mechanical Characteristics ◽  
Power Transmission ◽  
Operating Conditions ◽  
Direct Transmission ◽  
Direct Power ◽  
Propulsion Systems ◽  
Heat Engines ◽  
Ice Field ◽  
Analytical Section

В статье проведено краткое сопоставление основных характеристик гребных электрических установок, традиционно применяемых на отечественных атомных ледоколах, и судовых реверсивных главных турбозубчатых агрегатов. В работе показано, что естественные механические характеристики турбозубчатых агрегатов позволяют удовлетворить основные требования к работе ледокольных двигательно-движительных установок без построения сложных систем, которые имеют место в гребных электрических установках для получения искусственных механических характеристик электродвигателей с организацией диапазонов работы с постоянством мощности, диапазонов работы с ограничением крутящих моментов, а также – решения задачи утилизации рекуперируемой энергии при реверсах гребных винтов. В аналитическом разделе статьи показано, что в предложенной установке с прямой передачей мощности на гребной винт задача поддержания постоянства мощности энергоустановки на номинальных эксплуатационных режимах, задача обеспечения работы установки при движении в ледовом поле, когда требуется обеспечить «фрезерование» льда, чтобы исключить заклинивание и поломку гребного винта с ограничением максимальных перегрузочных крутящих моментов на гребном валу, задача реверсирования гребного винта решаются за счет использования естественных механических характеристик реверсивного турбозубчатого агрегата. При создании перспективных тяжелых атомных ледоколов рекомендуется применение более простой, надежной и экономичной схемы построения ледокольных главных энергетических установок на основе современных конструкций турборедукторных тепловых двигателей для привода гребных винтов. The article presents a brief comparison of the main characteristics of rowing electric installations, traditionally used on domestic nuclear icebreakers, and ship reversible main turbine with gearbox. The paper shows that the natural mechanical characteristics of turbine with gearbox allow us to meet the basic requirements for the operation of icebreaking propulsion systems without building complex systems that take place in rowing electric installations to obtain artificial mechanical characteristics of electric motors with the organization of ranges of operation with constant power, ranges of operation with limited torques, as well as solving the problem of utilization of recovered energy during propeller reversals. The analytical section of the article shows that in the proposed installation with direct power transmission to the propeller, the task of maintaining the constancy of the power plant's power at nominal operating conditions, the task of ensuring the operation of the installation when moving in an ice field, when it is necessary to ensure "ice milling" to eliminate jamming and breakage of the propeller with limiting the maximum overload torques on the propeller shaft, the task of reversing the propeller is solved by using the natural mechanical characteristics of a reversible turbine with gearbox. When creating promising heavy nuclear icebreakers, it is recommended to use a simpler, reliable and economical scheme for building icebreaking main power plants based on modern designs of turbine with gearbox as heat engines for driving propellers.

scholarly journals Hierarchical Bayesian reliability assessment of energy networks

2015 ◽  
Vol 56 ◽  
Author(s):  
Tomas Iešmantas ◽  
Robertas Alzbutas
Keyword(s):  
Power Plants ◽  
Power Transmission ◽  
Information Source ◽  
Reliability Assessment ◽  
Operating Conditions ◽  
Likelihood Method ◽  
Small Data ◽  
Hierarchical Bayesian ◽  
Transmission Networks ◽  
Energy Networks

It is often the case that data used for the systems reliability assessment comes from more than one information source. Whether they are power plants at different geographical locations, gas transmission pipelines operating in different environment or power transmission networks deployed within various areas. Therefore, different operating conditions, varying maintenance programs and efficiencies have its share in influencing the vulnerability and variability of reliability data. However, in practice it is usually the case that this heterogeneity is neglected leading to the underestimation of underlying uncertainty of the data. Bayesian models are capable of dealing with this kind of uncertainty as opposedto the frequentists statistical methods. Hierarchical Bayesian modelling technique provides means to quantify not only within-source, but also between-source uncertainties. Even in the case of small data samples it performs well, unlike for example the classical likelihood method which may provide degenerate estimates. In this paper authors investigate the possibility to incorporate this kind of uncertainty into the systems reliability and vulnerability assessment through the Bayesian framework in several cases: gas transmission networks and power transmission grids.

Could biomass-fueled boilers be operated at higher steam temperatures? Part 3: Initial analysis of costs and benefits

TAPPI Journal ◽  
2014 ◽  
Vol 13 (8) ◽  
pp. 65-78 ◽  
Author(s):  
W.B.A. (SANDY) SHARP ◽  
W.J. JIM FREDERICK ◽  
JAMES R. KEISER ◽  
DOUGLAS L. SINGBEIL
Keyword(s):  
Flue Gas ◽  
Power Plants ◽  
Superheated Steam ◽  
Black Liquor ◽  
Simulation Software ◽  
Operating Conditions ◽  
Costs And Benefits ◽  
Steam Generation ◽  
Fireside Corrosion ◽  
Corrosion Resistant

The efficiencies of biomass-fueled power plants are much lower than those of coal-fueled plants because they restrict their exit steam temperatures to inhibit fireside corrosion of superheater tubes. However, restricting the temperature of a given mass of steam produced by a biomass boiler decreases the amount of power that can be generated from this steam in the turbine generator. This paper examines the relationship between the temperature of superheated steam produced by a boiler and the quantity of power that it can generate. The thermodynamic basis for this relationship is presented, and the value of the additional power that could be generated by operating with higher superheated steam temperatures is estimated. Calculations are presented for five plants that produce both steam and power. Two are powered by black liquor recovery boilers and three by wood-fired boilers. Steam generation parameters for these plants were supplied by industrial partners. Calculations using thermodynamics-based plant simulation software show that the value of the increased power that could be generated in these units by increasing superheated steam temperatures 100°C above current operating conditions ranges between US$2,410,000 and US$11,180,000 per year. The costs and benefits of achieving higher superheated steam conditions in an individual boiler depend on local plant conditions and the price of power. However, the magnitude of the increased power that can be generated by increasing superheated steam temperatures is so great that it appears to justify the cost of corrosion-mitigation methods such as installing corrosion-resistant materials costing far more than current superheater alloys; redesigning biomassfueled boilers to remove the superheater from the flue gas path; or adding chemicals to remove corrosive constituents from the flue gas. The most economic pathways to higher steam temperatures will very likely involve combinations of these methods. Particularly attractive approaches include installing more corrosion-resistant alloys in the hottest superheater locations, and relocating the superheater from the flue gas path to an externally-fired location or to the loop seal of a circulating fluidized bed boiler.

"Recent Patents on the Triboelectrostatic Separation of Fly Ash"

2019 ◽  
Vol 13 ◽  
Author(s):  
Haisheng Li ◽  
Wenping Wang ◽  
Yinghua Chen ◽  
Xinxi Zhang ◽  
Chaoyong Li
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
High Efficiency ◽  
Separation Efficiency ◽  
High Reliability ◽  
Operating Conditions ◽  
Security Requirements ◽  
Unburned Carbon ◽  
Efficient Operation ◽  
Triboelectrostatic Separation

Background: The fly ash produced by coal-fired power plants is an industrial waste. The environmental pollution problems caused by fly ash have been widely of public environmental concern. As a waste of recoverable resources, it can be used in the field of building materials, agricultural fertilizers, environmental materials, new materials, etc. Unburned carbon content in fly ash has an influence on the performance of resource reuse products. Therefore, it is the key to remove unburned carbon from fly ash. As a physical method, triboelectrostatic separation technology has been widely used because of obvious advantages, such as high-efficiency, simple process, high reliability, without water resources consumption and secondary pollution. Objective: The related patents of fly ash triboelectrostatic separation had been reviewed. The structural characteristics and working principle of these patents are analyzed in detail. The results can provide some meaningful references for the improvement of separation efficiency and optimal design. Methods: Based on the comparative analysis for the latest patents related to fly ash triboelectrostatic separation, the future development is presented. Results: The patents focused on the charging efficiency and separation efficiency. Studies show that remarkable improvements have been achieved for the fly ash triboelectrostatic separation. Some patents have been used in industrial production. Conclusion: According to the current technology status, the researches related to process optimization and anti-interference ability will be beneficial to overcome the influence of operating conditions and complex environment, and meet system security requirements. The intelligent control can not only ensure the process continuity and stability, but also realize the efficient operation and management automatically. Meanwhile, the researchers should pay more attention to the resource utilization of fly ash processed by triboelectrostatic separation.

Viability of turbine blade material with a long service life

2019 ◽  
pp. 28-35
Author(s):  
O. B. Berdnik ◽  
I. N. Tsareva ◽  
M. K. Chegurov
Keyword(s):  
Heat Treatment ◽  
Service Life ◽  
Yield Strength ◽  
Mechanical Characteristics ◽  
Operating Time ◽  
Structural Features ◽  
Operating Conditions ◽  
Standard Methods ◽  
Experimental Values ◽  
Plasticity Coefficient

This article deals with structural features and characteristic changes that affect the mechanical characteristics after different service life in real conditions using the example of the blades of the 4th stage of turbine GTE-45-3 with an operating time of 13,000 to 100,000 hours. To study the change in the state of the material under different operating conditions, determine the degree of influence of heat treatment on the regeneration of the microstructure, and restore the mechanical characteristics of the alloy after different periods of operation, non-standard methods were used: relaxation tests on miniature samples to determine the physical yield strength and microplasticity limit and quantitative evaluation of the plasticity coefficient of the material from experimental values of hardness, which allow us to identify the changes occurring in the microvolumes of the material and predict the performance of the product as a whole.

scholarly journals Selection of Heat Pump Capacity Used at Thermal Power Plants under Electricity Market Operating Conditions

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 226
Author(s):  
Milana Treshcheva ◽  
Irina Anikina ◽  
Vitaly Sergeev ◽  
Sergey Skulkin ◽  
Dmitry Treshchev
Keyword(s):  
Electric Power ◽  
Heat Pump ◽  
Heat Load ◽  
Power Plants ◽  
Thermal Power ◽  
Heat Pumps ◽  
Operating Conditions ◽  
Energy Resources ◽  
Thermal Power Plants ◽  
Maximum Heat

The percentage of heat pumps used in thermal power plants (TPPs) in the fuel and energy balance is extremely low in in most countries. One of the reasons for this is the lack of a systematic approach to selecting and justifying the circuit solutions and equipment capacity. This article aims to develop a new method of calculating the maximum capacity of heat pumps. The method proposed in the article has elements of marginal analysis. It takes into account the limitation of heat pump capacity by break-even operation at electric power market (compensation of fuel expenses, connected with electric power production). In this case, the heat pump’s maximum allowable capacity depends on the electric capacity of TPP, electricity consumption for own needs, specific consumption of conditional fuel for electricity production, a ratio of prices for energy resources, and a conversion factor of heat pump. For TPP based on combined cycle gas turbine (CCGT) CCGT-450 with prices at the Russian energy resources markets at the level of 2019, when operating with the maximum heat load, the allowable heat pump capacity will be about 50 MW, and when operating with the minimum heat load—about 200 MW.

Designing CO2 Transmission Pipelines Without Crack Arrestors

2010 ◽  
Author(s):  
Graeme G. King ◽  
Satish Kumar
Keyword(s):  
Wall Thickness ◽  
Carbon Capture ◽  
Power Plants ◽  
Oil And Gas ◽  
Cost Optimization ◽  
Operating Conditions ◽  
Operating Pressure ◽  
Design Work ◽  
Industrial Facilities ◽  
Pipeline Network

Masdar is developing several carbon capture projects from power plants, smelters, steel works, industrial facilities and oil and gas processing plants in Abu Dhabi in a phased series of projects. Captured CO2 will be transported in a new national CO2 pipeline network with a nominal capacity of 20×106 T/y to oil reservoirs where it will be injected for reservoir management and sequestration. Design of the pipeline network considered three primary factors in the selection of wall thickness and toughness, (a) steady and transient operating conditions, (b) prevention of longitudinal ductile fractures and (c) optimization of total project owning and operating costs. The paper explains how the three factors affect wall thickness and toughness. It sets out code requirements that must be satisfied when choosing wall thickness and gives details of how to calculate toughness to prevent propagation of long ductile fracture in CO2 pipelines. It then uses cost optimization to resolve contention between the different requirements and arrive at a safe and economical pipeline design. The design work selected a design pressure of 24.5 MPa, well above the critical point for CO2 and much higher than is normally seen in conventional oil and gas pipelines. Despite its high operating pressure, the proposed network will be one of the safest pipeline systems in the world today.

Inlet Air Cooling Applied to Combined Cycle Power Plants: Influence of Site Climate and Thermal Storage Systems

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Nicola Palestra ◽  
Giovanna Barigozzi ◽  
Antonio Perdichizzi
Keyword(s):  
Power Output ◽  
Parametric Analysis ◽  
Power Plants ◽  
Cooling System ◽  
Thermal Storage ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Cooling Systems

The paper presents the results of an investigation on inlet air cooling systems based on cool thermal storage, applied to combined cycle power plants. Such systems provide a significant increase of electric energy production in the peak hours; the charge of the cool thermal storage is performed instead during the night time. The inlet air cooling system also allows the plant to reduce power output dependence on ambient conditions. A 127MW combined cycle power plant operating in the Italian scenario is the object of this investigation. Two different technologies for cool thermal storage have been considered: ice harvester and stratified chilled water. To evaluate the performance of the combined cycle under different operating conditions, inlet cooling systems have been simulated with an in-house developed computational code. An economical analysis has been then performed. Different plant location sites have been considered, with the purpose to weigh up the influence of climatic conditions. Finally, a parametric analysis has been carried out in order to investigate how a variation of the thermal storage size affects the combined cycle performances and the investment profitability. It was found that both cool thermal storage technologies considered perform similarly in terms of gross extra production of energy. Despite this, the ice harvester shows higher parasitic load due to chillers consumptions. Warmer climates of the plant site resulted in a greater increase in the amount of operational hours than power output augmentation; investment profitability is different as well. Results of parametric analysis showed how important the size of inlet cooling storage may be for economical results.

Rowing electric installations: overview, analysis, development prospects

2022 ◽  
Author(s):  
Aleksey Burkov ◽  
Viktor Mihanoshin
Keyword(s):  
Power Plants ◽  
Theory And Practice ◽  
Power Engineering ◽  
Educational Institutions ◽  
Propulsion Systems ◽  
Ship Propulsion ◽  
Electrical Systems ◽  
Overview Analysis ◽  
Technical Solutions ◽  
Development Prospects

The monograph provides an overview and analysis of ship's rowing electrical installations, modern scientific and technical solutions aimed at improving the theory and practice of electrical systems of ship propulsion systems are considered. Solutions of urgent problems related to the development of rowing electric installations of small-tonnage vessels based on the introduction of combined power plants, including electrochemical sources of electricity (batteries), are proposed. It is intended for scientific and educational purposes and is aimed at specialists in the field of ship power engineering, cadets and students of electromechanical specialties of educational institutions.

Experimental testing of open pit dump trucks in operating conditions

2020 ◽  
pp. 530-542
Author(s):  
A. G. Zhuravlev ◽  
M. V. Isakov
Keyword(s):  
Power Plants ◽  
Experimental Testing ◽  
Operating Conditions ◽  
Open Pit ◽  
Dump Truck ◽  
Experimental Measurements ◽  
Complex Data ◽  
Special Unit ◽  
Operating Modes ◽  
Dump Trucks

The high importance of optimizing the operation of quarry transport is confirmed by the leading share of its costs in the total cost of mining. The current direction of optimization is the development and implementation of digital technologies for processing complex data on the parameters of transport vehicles. The solution of the above issues should be based on the results of scientific research on the collection and processing of information. Developed a set of techniques to perform experimental measurements of working parameters of mining dump trucks as part of a special unit experiments, and long monitoring measurements. A set of equipment for performing experimental measurements, as well as its installation on a dump truck is presented. The data of experimental measurements and a methodical approach to their analysis are presented. In particular, it shows the identification of operating modes of the power plant and the construction of the load diagram, the identification of elements of the transport cycle, etc. The approach to substantiation of innovative designs of power plants adapted to the conditions of a particular quarry is shown on the example of calculated schedules of energy consumption and reserve of recovery of braking energy. The proposed hardware-methodical complex is a research model for the development of methods for automated data collection and processing in the formation of elements of digital mining production.

Real-Time Thermodynamic Performance Monitoring and Optimum Thermoeconomic Operation of Power Plants

2011 ◽  
Author(s):  
G. Hariharan ◽  
B. Kosanovic
Keyword(s):  
Linear Programming ◽  
Power Plant ◽  
Real Time ◽  
Power Plants ◽  
Operating Conditions ◽  
Recursive Least Squares ◽  
Time Data ◽  
Real Time Data ◽  
One Step ◽  
Inputs And Outputs

The ability of modern power plant data acquisition systems to provide a continuous real-time data feed can be exploited to carry out interesting research studies. In the first part of this study, real-time data from a power plant is used to carry out a comprehensive heat balance calculation. The calculation involves application of the first law of thermodynamics to each powerhouse component. Stoichiometric combustion principles are applied to calculate emissions from fossil fuel consuming components. Exergy analysis is carried out for all components by the combined application of the first and second laws of thermodynamics. In the second part of this study, techniques from the field of System Identification and Linear Programming are brought together in finding thermoeconomically optimum plant operating conditions one step ahead in time. This is done by first using autoregressive models to make short-term predictions of plant inputs and outputs. Then, parameter estimation using recursive least squares is used to determine the relations between the predicted inputs and outputs. The estimated parameters are used in setting up a linear programming problem which is solved using the simplex method. The end result is knowledge of thermoeconomically optimum plant inputs and outputs one step ahead in time.

Sign in / Sign up

Export Citation Format

Share Document